Cts T-30/950 Ex/I nakup rabljenega (99.308)

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), CTS Model: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control: 32-bit controller LCD control panel Digital display of set and actual values Numeric entry of set values Clear-text error messages RS 232 interface Free switching channels for customer-side test specimen control Temperature tests: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Heat radiation: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring: With nitrogen inertization, the test chamber is initially purged with a large amount of N₂ until the oxygen content drops below 3%. Then it switches to a base flow (approx. 10% of the full purging amount). Credpfxsihb Amo Apljb The baseline nitrogen flow is measured with a flow meter, displayed, and monitored via a limit switch. O₂ monitoring continuously extracts gas from the test chamber via a flame arrestor and channels it over an O₂ sensor to monitor the residual oxygen content in the extracted air. After measurement, the gas passes through a second flame arrestor back into the test chamber. The exhaust pump is monitored by a flow meter. Further details can be found in the user manual by Dräger in the appendix. Note: The gas system is currently out of service! The technical data refer to an ambient temperature of +25°C, rated voltage of 400V, without test material, without radiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection rating: IP 54 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level:

Stanje: rabljeno, lastna masa: 5.280 kg, največja dovoljena obremenitev: 35.720 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, naslednji pregled (TÜV): 10/2026, vzmetenje: zrak, velikost pnevmatike: 385/55 22,5, stanje pnevmatik: 70 odstotek, barva: črn, Leto izdelave: 2018, obratovalne ure: 391.159 h, prevoženi kilometri: 391.159 km, velikost sprednje pnevmatike: 385/55 22,5, velikost zadnje pnevmatike: 385/55 22,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference number for inquiries: 41286 Crjdpfxoy Nwbds Aplob Krone, SDC 27 Highcube * Year of manufacture: 2018 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Air suspension * Air connection coupling head (red + yellow) * Connection plugs: 2x 7-pin * Connection plug: 15-pin * Lifting and lowering device * ADR/GGVS hazardous goods equipment * Inspections: Roadworthiness/Emissions (HU/AU) until 10/2026 * Suspension: Air * Gross vehicle weight: 41,000 kg * Unladen weight: 5,280 kg * Payload: 35,720 kg * Permissible total weight: 41,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 70% -- 70% | Tire size: 385/55 R22.5 * Tire condition, 2nd axle: 70% -- 70% | Tire size: 385/55 R22.5 * Tire condition, 3rd axle: 60% -- 60% | Tire size: 385/55 R22.5 * Tire sizes: 385/55 R22.5 * Krone chassis with rear extension * ADR EX II, EX III, FL, AT * Container mount: 1x40' tunnel * Mounting options: 2x20', 1x20' central, 1x20' flush rear, 1x30' flush rear * Height-adjustable locking system * Suitable for High Cube containers * 1 previous owner Liability disclaimer: Subject to alterations, prior sale, and errors. You can find more photos and videos on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing solutions * Processing of all (export) documents * Ordering export license plates / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * Technical inspection (TÜV acceptance), registration service * Transportation of commercial vehicles Ask our trained staff, we are happy to advise you.

Stanje: rabljeno, prevoženi kilometri: 750.000 km, moč: 175 kW (237,93 KM), prva registracija: 05/2013, vrsta goriva: dizel, skupna masa: 12.000 kg, vrsta prenosa: samodejen, emisijski razred: Euro 5, Oprema: dvižna zadnja plošča, filter saj, Dvižna ploščad: ----Hladilna naprava: Crodpfx Aoyxclmeplsb ----- Motorna zavora - Klima - Dvižna ploščad - Vrata - Carrier Supra 950 Vzmetenje: Zračno vzmetenje

Stanje: zelo dobro (rabljeno), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Model: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: water-cooled Credpoy H Hk Ajfx Aplsb Description Used temperature shock test chamber from CTS. Suitable for thermal shock and cyclic temperature testing. Applications in industry, research, and quality assurance. Application Areas - Material testing - Aging tests - Electronic and component testing - Temperature shock testing - Automotive and quality assurance Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment - Touchscreen control - Microprocessor controller - Programmable operation - Digital setpoint/actual value display - 2-zone system - Transfer basket for rapid change - Viewing window - Integrated control cabinet - Cooling water connections Technical Specifications - Separate hot and cold chambers - Stainless steel test compartment - Industrial-grade design Dimensions External: 2335 x 940 x 1820 mm Insertion opening: 1990 x 940 x 1652 mm Internal: 410 x 480 x 660 mm Weight Approx. 950 kg Documentation - Declaration of conformity - Test certificates - Operating manual - Wiring diagram and piping layout - Spare parts list Pre-shipment Service (optional) - Functional check - Refrigerant service - Leak test - Test run with protocol Condition Used. Optical condition as per photos. Scope of Delivery - Test chamber TSS-70/350-A - Documentation (as far as available) Note Used device, sold without warranty. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Stanje: zelo dobro (rabljeno), CTS Type: TSS-70/350-A Water-Cooled Refrigeration Unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is used for conducting thermal shock tests and is typically utilized in industry, research, and quality assurance. Areas of Application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical Data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerants: R404A / R23 Pre-cooling stage: approx. 6.0 kg Credpfxey Hkgbj Aplsb Cooling stage: approx. 3.0 kg water-cooled Features / Equipment: - CTS control unit with touch display - Microprocessor-controlled regulation and monitoring system - Programmable operation - Digital setpoint and actual value display - 2-zone system (hot and cold chamber) - Automatic transfer basket for shock tests Technical Design: - Hot and cold chambers separated - Transfer basket system for rapid temperature change - Test chamber made of stainless steel - Shelf/grate - Inspection window in the door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: Approx. 950 kg Further Information: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors reserved!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TSS-70/130 Water-cooled Refrigeration Unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The unit is designed for conducting temperature shock tests and is typically used in industry, research, and quality assurance environments. Applications: - Material testing - Aging tests - Electronics and component testing - Temperature shock and thermal cycling tests Technical Specifications: Type: TSS-70/130 Cedpfx Ajy Hkfdsplerb Test chamber volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient to +180°C Cooling rate: approx. 4 K/min from ambient to -60°C Temperature deviation: ±1 K (temporal) ±2 K (spatial) Temperature change rate: max. 100 K/min on average for shock testing (without radiant heat) Transfer time between chambers: ≤ 15 min within the range -65°C to +200°C (with 10 kg ICs) Switching time: < 10 seconds Electrical Data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 16.7 kW Rated current: approx. 26.8 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigerant system: Refrigerants: R404A / R23 Water-cooled, low-noise, fully hermetic Features / Equipment: - CTS control unit - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for user-side test piece control - Fault message on potential-free contact (load up to 30 V DC, 2 A) - EMC tested Technical Design: - Hot and cold chambers - Transport trolley with spindle drive - Test chamber / trolley made of stainless steel, material no. 1.4301 - Stainless steel wire basket - Feedthrough pipe NW 50 with sealing plug - Compressed air connection 1/4" male - Condensate drain non-pressurized R 1/2" female - Safety door lock - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Clearance dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm Width approx. 480 mm Depth approx. 660 mm Window: 300 x 300 mm Other Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: see pictures (Technical data subject to change and errors!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS Model: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for carrying out thermal shock tests and is typically used in industry, research, and quality assurance. Areas of application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and alternating temperature tests Technical specifications: Model: TSS-70/130 Test volume: 130 liters Temperature range: Hot zone: +50°C to +200°C Cold zone: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min average for shock test applications Without radiant heat Transfer time between chambers: ≤ 15 min in the range of -65°C to +200°C (with 10 kg ICs) Credey Hkd Hjpfx Apljb Changeover time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A Building-side protection: 32 A slow-blow fuse Power plug: Cekon 32 Refrigeration system: Refrigerants: R404A / R23 Water-cooled, low noise, fully hermetic Equipment / features: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for user side test object control - Fault alarm on volt-free contact Load: up to 30 V DC, 2 A - EMC-tested Technical configuration: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber / basket made of stainless steel, material grade 1.4301 - Insert basket made of stainless steel wire - Piping port NW 50 with closure plug - Compressed air connection 1/4" male thread - Non-pressurised condensate drain R 1/2" female thread - Safety door lock - Lockable door with window Dimensions according to installation plan: External dimensions approx.: 2335 x 940 x 1820 mm Insertion dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm Width approx. 480 mm Depth approx. 660 mm Window: 300 x 300 mm Additional data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average test cycle consumption: approx. 8 kWh Important buyer safety information! The following procedures are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant where required 3. Leak tightness test with certificate 4. After a successful check, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see images (Specifications subject to change and error!) We are happy to answer further questions by phone.

Leto izdelave: 2025, obratovalne ure: 2 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos quickly and easily, without extensive programming knowledge. The software can automatically increment serial and article numbers after configuration. Additionally, the software is capable of extracting data (such as drawing numbers, project names, etc.) from existing tables and automatically transferring them to predefined fields. A handheld scanner can also be used. Standard equipment includes a laptop with mount, Windows operating system, and laser software. Optionally, the LAS 28 XL can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, a movable Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger sizes optional) • Marking software EZCAD (German/English) • Signal light to indicate operating status Crjdpfxjqfcvie Aplob • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: extension arms for large components (one-sided or double-sided) • Optional: autofocus system • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Maximum component height approx. 300mm • Electrically adjustable Z-axis • Laptop with mount and Windows OS • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 100 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C Crjdpfxsvz Hqtj Aplob - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution. Crsdpfx Apjvz Hqmjljb

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a wide range of marking tasks. The integrated fiber laser allows you to mark nearly all materials, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become essential in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial configuration. Furthermore, the software can retrieve data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be fitted with a rotary axis (three-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optionally larger) • Marking software EZCAD in German/English • Optional: rotary axis (three-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction system (with activated carbon filter) • Pilot laser (simple preview and contour preview) • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray Codpfxou Smd Ee Aplsrb • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / door height (pass-through): 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Laser for Product Marking – The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide variety of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser is essential in many industries. The powerful laser software enables you to create text, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers once configured. Additionally, the software is capable of reading data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transferring them into predefined fields. A handheld scanner can also be used. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options—such as lateral extensions for marking long parts, motorized Z-axis, drawer systems, etc.—are available upon request. Made in Germany Fiber laser: 30W, 20W or 50W • Laser class 1 • Wavelength: 1064nm • Marking field size: 150 x 150 mm (larger optional) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: exhaust system (incl. activated carbon filter) Cjdpfounh H Sex Aplsrb • Optional: autofocus system – automatic focus distance detection • Pilot laser (simple preview, contour preview) • Focus finder (user-friendly focus adjustment) • Status signal light • Max. workpiece height: approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard mount • Aluminum profile frame • Air-cooled • Door width: approx. 700 mm / pass-through height: 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (L x W x H) • Weight: approx. 120 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 30 t, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 1.250 mm, skupna masa: 6.950 kg, EUROMAC PREBIJALNI STROJ MOD. 1250/30 – 2000 AUTOINDEX LETO 2009 – CE – POPOLNOMA OBNOVLJEN, KOT NOV. Največja prebijalna sila: 300 kN Y-hod s multitoolom: 1300 mm Y-hod s enojnim orodjem: 1250 mm X-hod: 1250 x 2000 mm Samodejno pozicioniranje: Do 10.000 mm Regulacija hoda prebijala: od 0,1 do 31 mm Autoindex multitool postaj: 5 Hitrost vrtenja: programabilna Hitrost Y + X 1250: 50 m/min Hitrost Y + X 2000: 60 m/min Natančnost pozicioniranja: +/- 0,1 mm Odprtina klešč: 11 mm Maksimalno število udarcev: 300 (1/min) Maksimalna debelina: 10 mm Maksimalen premer prebijanja: 81 mm Vgrajena moč med delovanjem: 7,5 kW Leto izdelave: 2009 CE stroj Dimenzije: 2000 x 4000 x v 3350 mm Teža: 6950 kg Crjdpfoy Dgrnex Aplob

Stanje: rabljeno, prevoženi kilometri: 545.368 km, moč: 355 kW (482,67 KM), prva registracija: 06/2022, vrsta goriva: dizel, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 06/2026, zavore: retarder, barva: bela, vrsta prenosa: samodejen, Oprema: elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, Model Year * Model year: 2022 Transmission * Automatic transmission, 12+2 gears Assistance Systems * Electronic braking system (EBS) * Adaptive Cruise Control (ACC) Lighting and Visibility * Daytime running lights Audio & Communication * Radio * Information and service system Exterior * Leaf/air suspension * Fifth wheel coupling * Low noise emission * Alloy wheels * Electrically adjustable exterior mirrors * Speed limiter * Wide tires: 385 front axle * Storage box Safety * Retarder * Electronic Stability Program (ESP) * Outside temperature display * Wide-angle mirror * Immobilizer Interior * Fabric seats * Tachograph * Leather steering wheel * On-board computer * Sun visor * Cool box Comfort * Air conditioning * Auxiliary heater * Comfort seats * Air-suspended driver's seat * Seat heating * Lumbar support * Electric windows * Central locking Tyre Dimensions * 1st axle: 385/65 R22.5 * 2nd axle: 315/70 R22.5 Other Dimensions and Weights * Payload: 12,984 kg * Permissible total weight: 20,500 kg * Fuel tank: 310 l * Wheelbase: 3,800 mm Credpfxsyiwtxe Apljb ----Tyres: 385/65 R22.5, 9mm tread, front axle; 315/80 R22.5, 6-10mm tread, rear axle. Errors and changes excepted.

Stanje: rabljeno, prevoženi kilometri: 545.368 km, moč: 355 kW (482,67 KM), prva registracija: 06/2022, vrsta goriva: dizel, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 02/2027, zavore: retarder, barva: bela, vrsta prenosa: samodejen, Oprema: elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, Model year * Model year: 2022 Transmission * Automatic transmission, 12+2 gears Assistance systems * Electronic Braking System (EBS) * Adaptive Cruise Control (ACC) Lighting and Visibility * Daytime running lights Audio & Communication * Radio * Information and service system Exterior * Leaf/air suspension * Fifth-wheel coupling * Low-noise * Alloy wheels * Electrically adjustable exterior mirrors * Speed limiter * Wide tyres: 385 front axle * Storage box Safety * Intarder * Electronic Stability Program (ESP) * Outside temperature display * Wide-angle mirror * Immobiliser Interior * Fabric seats * Tachograph * Leather steering wheel * On-board computer * Sun visor * Cool box Comfort * Air conditioning * Auxiliary heater * Comfort seats * Air-suspended driver’s seat * Seat heating * Lumbar support * Electric windows * Central locking Tyre dimensions * 1st axle: 385/65 R22.5 * 2nd axle: 315/70 R22.5 Cedjyiwt Eopfx Aplorb Other dimensions and weights * Payload: 12,984 kg * Permissible total weight: 20,500 kg * Fuel tank: 310 l * Wheelbase: 3,800 mm ----NEW ARRIVAL The vehicle is currently inbound and will soon be available at our location in 01471 Radeburg. For any enquiries regarding condition, fittings or similar, please contact our used vehicle department in advance. Tyres: 385/65R22.5, 9 mm front axle; 315/80R22.5, 6–10 mm rear axle. Subject to errors and changes.

Stanje: rabljeno, prevoženi kilometri: 545.368 km, moč: 355 kW (482,67 KM), prva registracija: 06/2022, vrsta goriva: dizel, lastna masa: 7.516 kg, največja dovoljena obremenitev: 12.984 kg, skupna masa: 20.500 kg, konfiguracija osi: 4x2, medosna razdalja: 3.800 mm, naslednji pregled (TÜV): 02/2027, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, vzmetenje: jeklo-zrak, število sedežev: 2, Oprema: klimatska naprava, nizka raven hrupa, parkirni grelec, računalnik na krovu, tempomat, Leergewicht: 7516kg, zulässiges Gesamtgewicht: 20500kg, 1. Achse: 385/65 R22.5, 2. Achse: 315/70 R22.5, Sitze Stoff, Innenfarbe grau, Blatt-Luftfederung, Intarder, Fahrtenschreiber, Sattelkupplung, Elektronisches Bremssystem EBS, Elektronisches Stabilitätsprogramm ESP, Adaptive Cruise Control ACC, Komfortsitze, Fahrersitz luftgefedert, Sitzheizung, Radio, Lederlenkrad, Lordosenstütze, Leichtmetallfelgen, elektrische Fensterheber, Außentemperaturanzeige, elektrisch verstellbare Außenspiegel, Weitwinkelspiegel, Wegfahrsperre, Zentralverriegelung, Sonnenblende, Kühlbox, Tagfahrlicht, Informations- und Servicesystem, Geschwindigkeitsbegrenzer, Breitreifen: 385 VA, Staukasten, NEUZUGANG. Das Fahrzeug befindet sich aktuell im Zulauf und wird demnächst an unserem Standort in 01471 Radeburg verfügbar sein. Für Fragen hinsichtlich Zustand, Zusatzausstattungen oder Ähnlichem wenden Sie sich gerne vorab an unsere Gebrauchtwagenabteilung. Reifen: 385/65R22,5 9mm Vorderachse, 315/80R22,5 6-10mm Hinterachse. Irrtümer und Änderungen vorbehalten. Crsdpfx Aoyixuksplsb

Stanje: rabljeno, prevoženi kilometri: 545.368 km, moč: 355 kW (482,67 KM), prva registracija: 06/2022, vrsta goriva: dizel, lastna masa: 7.516 kg, največja dovoljena obremenitev: 12.984 kg, skupna masa: 20.500 kg, konfiguracija osi: 4x2, medosna razdalja: 3.800 mm, naslednji pregled (TÜV): 06/2026, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, vzmetenje: jeklo-zrak, število sedežev: 2, Oprema: klimatska naprava, nizka raven hrupa, parkirni grelec, računalnik na krovu, tempomat, Lastna teža: 7516 kg, dovoljena skupna masa: 20500 kg, 1. os: 385/65 R22.5, 2. os: 315/70 R22.5, sedeži iz blaga, notranjost siva, listno-zračna vzmetenje, intarder, tahograf, sedlasta sklopka, elektronski zavorni sistem EBS, elektronski stabilnostni program ESP, prilagodljiv tempomat ACC, udobni sedeži, voznikov sedež z zračno vzmetenjem, ogrevanje sedeža, radio, usnjen volan, ledvena opora, lahka aluminijasta platišča, električna okna, prikaz zunanje temperature, električna zunanja ogledala, širokokotni ogledali, imobilizator, centralno zaklepanje, senčnik, hladilna skrinja, dnevne luči, informacijski in servisni sistem, omejevalnik hitrosti, široke pnevmatike: 385 spredaj, shranjevalna škatla, pnevmatike: 385/65R22,5 9 mm sprednja os, 315/80R22,5 6-10 mm zadnja os. Pridržujemo si pravico do napak in sprememb. Credjyixudspfx Apleb

Stanje: rabljeno, Leto izdelave: 2019, Format: 2000 x 950 mm Oprema: Codoyzruispfx Aplorb Električni modularni sušilnik Sistem prisilnega vročega zraka dimenzije 3800 x 1250 x 2170 mm MOČ 15 kW 27 A teža 650 KG

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, including steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. The use of lasers for permanent marking has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Lot and article numbers can be automatically incremented by the software after prior configuration. Additionally, the software can read data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a handheld scanner is also supported. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side arms for marking long parts, movable Z-axis, drawer systems, etc., are available. Programmable, software-controlled axes (X, Y, Z axes) and database connectivity are also possible. Made in Germany Fiber laser: 30 W, 20 W or 50 W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optionally available) • Marking software: EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – for automatic focal distance determination • Optional: programmable X, Y, and Z axes (software-controlled) • Pilot laser (easy preview, contour preview) • Focus finder (for easy focus adjustment) • Signal beacon for operating status display • Max. workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard support • Frame made of aluminum profiles • Air cooled • Door width approx. 700 mm / Pass-through door height: 400 mm • 230 V power connection • Dimensions: approx. 900 x 800 x 1900 mm (L x W x H) • Weight: approx. 120 kg Credpfx Apewkpvvolsb

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: AT88, Used Tetra Pak Sterilizer + Homogenizer 12000 l/h The used Tetra Pak Sterilizer + Homogenizer 12000 l/h processes liquid food products through thermal treatment and homogenization, ensuring high safety and quality standards in industrial production. By combining a UHT sterilization system with a high-pressure homogenizer, it offers optimal processing for various food and beverage applications. Additionally, the design allows for easy integration into existing production lines, making it a practical choice for manufacturers. General Features This system operates with a capacity of 12,000 liters per hour (l/h) and delivers both high performance and consistent results in thermal treatment and particle size reduction. Tetra Pak, a leading brand in food processing technology, manufactured this unit in 2008, providing a balance between proven reliability and advanced engineering. The system's robust construction also ensures long-term durability and reduces the need for frequent maintenance. Tetra Pak UHT Sterilizer The UHT sterilization plant uses high temperatures to ensure the microbiological stability of liquid products. Thanks to a controlled heating system, it maintains the sterilization temperature between 95°C and 138°C, depending on production requirements. Additionally, operators can adjust the holding time at multiple levels, choosing between 5, 10, 15 seconds for initial phases and 30, 45, 60 seconds for advanced phases, enabling precise control of the thermal treatment. To optimize heat exchange, the system regulates hot water flow between 10,500 and 32,000 l/h, ensuring uniform sterilization. As a result, the unit maintains an outlet temperature between 85°C and 95°C for controlled cooling before further processing. Another important advantage is that the design allows seamless integration with homogenization systems, CIP units (cleaning-in-place), and aseptic filling lines. Consequently, manufacturers can streamline their production process while maintaining hygiene and quality standards. Tetra Pak Alex 30 Homogenizer The Tetra Pak Alex 30 Homogenizer operates at pressures up to 250 bar, effectively reducing particle size and improving product stability. Processing between 6,000 and 14,000 l/h, it is ideal for enhancing the consistency and quality of UHT-treated liquid products. The system also features stainless steel or solid ceramic cone valves and pistons, ensuring durability and wear resistance. Profiled and V-shaped seals are included, providing effective sealing and reducing maintenance requirements. As the homogenization process operates in two stages, the system ensures maximum efficiency. The first stage applies 42% of the pressure, while the second stage handles the remaining 58%, both controlled electronically via VDC signals for optimal precision. This delivers consistently high-quality results. Additionally, the machine is driven by an ABB ... Cjdev Di Itspfx Aplerb

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, obratovalne ure: 5.400 h, nosilnost: 3.000 kg, dvižna višina: 5.500 mm, prosto dvigovanje: 1.600 mm, vrsta goriva: dizel, tip droga: triplex, Nosilnost 3000 kg Linde H 30 Diesel Tip droga: triplex prosti dvig Leto izdelave: 2015 Delovne ure: 5400 Dvižna višina cca 5500 mm Gradbena višina cca 2400 mm 3. in 4. ventil, dvojna dodatna hidravlika Bočni pomik + naprava za nastavitev vilic Bruto 23.681 €, neto 19.900 € Na voljo sredi februarja Credpoyf I Tnefx Aplob Iščete drug viličar ali visoko dvigalo? Plin, električni, dizelski? Pišite nam in poiskali bomo ustrezno vozilo za vas. Pridržujemo si pravico do napake in predhodne prodaje. Prodaja samo pravnim osebam, brez garancije.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.064 mm, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 800 mm, skupna višina: 2.000 mm, skupna dolžina: 900 mm, skupna masa: 100 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, vhodni tok: 16 A, potrebna širina: 800 mm, valovna dolžina laserja: 1.064 nm, delovna višina: 900 mm, zahteva za prostor dolžina: 900 mm, vrsta laserja: vlakenski laser, Oprema: odsesavanje hlapov, The universal LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on the requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, laser-based permanent marking has become essential. The powerful laser software enables you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be incremented automatically by the software after initial set-up. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a hand scanner is also possible. The standard equipment includes a laptop with mount, Windows operating system, and laser software. Optionally, the LAS 28 XL laser marking system can be outfitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, adjustable Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (optionally larger) • Marking software: EZCAD in German / English • Signal lamp to display operating status • Optional: Rotary axis (3-jaw chuck) • Optional: Digital height measuring system • Optional: Fume extraction (incl. activated carbon filter) • Optional: Extensions for large components (one-sided or double-sided) • Optional: Autofocus system • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Maximum component height: approx. 300 mm • Electrically adjustable Z-axis Csdpfx Apjywg Sbjljrb • Laptop with mount and Windows operating system • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): approx. 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 100 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, obratovalne ure: 8.117 h, nosilnost: 3.000 kg, dvižna višina: 5.380 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.480 mm, moč: 30 kW (40,79 KM), Oprema: bočni pomik, kabina, osvetlitev, spojka prikolice, Dizelski viličar STILL RX70-30 Leto izdelave: 2015 Po števcu: 8.117 ur Dvižna zmogljivost: 3 tone Gradbena višina: 2,48 m Dvižna višina: 5,38 m Moč: 30 kW - Triplex prosti dvig - Bočni pomik Codpfx Apoyddbljlsrb - Nastavljive vilice - Polna kabina (le ena vrata) - Svetlobna oprema - Originalni lak - Takoj pripravljen za uporabo Prodajna cena: 10.900 EUR neto Možna tudi ugodna dostava!

Stanje: rabljeno, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 10/2000, širina tovornega prostora: 40 mm, skupna dolžina: 9.400 mm, skupna širina: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, medosna razdalja: 7.450 mm, Leto izdelave: 2000, Oprema: ABS, = Additional options and accessories = - EBS - Lift axle - Air suspension - Drum brakes = Notes = 2000 Van Hool 20FT/30FT ADR (EX/II, EX/III, FL, OX, AT), ABS/EBS, SAF axles with drum brakes, 1st axle is a lift axle, 385/65-R22.5 tyres (L: 4/13/8mm; R: 6/14/7mm), unladen weight 3,950 kg, max. gross weight: 39,000 kg, Dutch registration. = Further information = General information Mileage: 228,518 km Registration number: OG-37-KJ Axle configuration Axle brand: SAF Brakes: drum brakes Suspension: air suspension Rear axle 1: Tyre size: 385/65 R22.5; lift axle; max. axle load: 9,000 kg; tyre tread left: 25%; tyre tread right: 40% Rear axle 2: Tyre size: 385/65 R22.5; max. axle load: 9,000 kg; tyre tread left: 80%; tyre tread right: 90% Rear axle 3: Tyre size: 385/65 R22.5; max. axle load: 9,000 kg; tyre tread left: 50%; tyre tread right: 45% Weights Unladen weight: 3,950 kg Payload: 35,050 kg Cjdpfx Aeyngx Ueplsrb Gross vehicle weight: 39,000 kg Functional Body manufacturer: Van Hool 3B2015 Condition General condition: average Technical condition: average Visual condition: average Further information Please contact Arne Honingh for more information.

Stanje: rabljeno, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 02/2001, širina tovornega prostora: 40 mm, skupna dolžina: 9.290 mm, skupna širina: 2.470 mm, vzmetenje: zrak, medosna razdalja: 7.610 mm, Leto izdelave: 2001, Oprema: ABS, = Additional Options and Equipment = - Air suspension - Drum brakes = Notes = 2001 GROENEWEGEN 20FT/30FT ADR (EX/II, EX/III, FL, OX, AT) chassis, ABS, ROR axles with drum brakes, 385/65-R22.5 tyres (L: 5/7/14 mm; R: 6/7/13 mm), unladen weight 3,920 kg, max. permissible weight: 41,000 kg, Dutch registration. = Further Information = General Information Odometer reading: 228,518 km Registration number: OG-84-NJ Axle Configuration Axle brand: ROR Cjdoyngxzjpfx Aplerb Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 40% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 45%; Tyre tread right: 45% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 90%; Tyre tread right: 80% Weights Unladen weight: 3,920 kg Payload: 37,080 kg Gross vehicle weight: 41,000 kg Functional Body brand: Groenewegen 30CC-14-27 Condition Overall condition: average Technical condition: good Optical condition: average Additional Information Please contact Arne Honingh for further information.