Concept Laser 3D Tiskalnik Za Kovine nakup rabljenega (91.017)

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11105234, TECHNICAL DETAILS Maximum load capacity: approx. 37 kg Rated load capacity: approx. 30 kg Nwsdpfsyvzuhox Altoi Maximum reach: approx. 2101 mm Repeatability: 0.05 mm (ISO 9283) Number of axes: 6 Operating ambient temperature: 0 °C - 55 °C (273 K to 328 K) Storage & transport ambient temperature: -40 °C - 60 °C (233 K to 333 K) Positioner Model: KUKA DKP400 V2 Two-Axis Positioner Electrically insulated faceplate Air cooler Model: Thermo Chiller HRS050-AF-20 MACHINE DETAILS Drive Model: Meltio Engine V2.0 Power: 7.5 kW Frequency: 50/60 Hz Full load current: 22 A 3W + N + PE, 200-240 / 380-415 V, 16A 3W + PE, 200-240 V, 25 A 2W + PE, 200-240 V, 40 A Control system Model: KR C5-2, KR C5 Integrated software: Melito Engine Dual Wire & Melito Engine Hot Wire Protection rating: IP65 (IEC 60529) Central hand protection: IP65 / IP67 (IEC 60529) Dimensions Overall dimensions (L x W x H): 5,000 x 4,000 x 4,000 mm Sliding door opening dimensions: 2,000 x 3,000 mm EQUIPMENT Laser safety cabin, lightproof 4 controllers in one system Roof closed and removable Note: Images 1 & 2 show the assembled condition at the last operator.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 28.22.0079, Leto izdelave: 2022, obratovalne ure: 6.700 h, skupna masa: 1.870 kg, laserska moč: 700 W, obratovalni tlak: 8 letvica, notranja višina: 365 mm, notranja dolžina: 280 mm, No reserve price – guaranteed sale to the highest bidder! The system has been serviced annually by SLM Solutions. Service reports and machine evaluation are available upon request. The package includes the "Material Change Kit SLM280 2.0 complete incl. PSM100" as well as a second set of filter housings, minimizing the effort required when switching between two materials. TECHNICAL DETAILS Laser power: up to 700 W Materials: suitable for all common materials used in the SLM process Temperature range: 20–25 °C Relative humidity: max. 60 % Floor evenness: max. 5 mm/m² Floor load capacity: min. 2,200 kN/m² Floor surface: antistatic, solvent-resistant, liquid-tight, smooth Build Area and Process Data Build volume (L x W x H): 280 x 280 x 365 mm Actual build rate: up to 113 cm³/h Variable layer thickness: 20–90 µm Minimum structure size: 150 µm Laser spot diameter: 80–115 µm Scan speed: max. 10 m/s Laser type: IPG fiber laser Single Laser 700 Watt Media Supply Operating pressure Argon: 7–8 bar Operating pressure Nitrogen: 7–8 bar Operating pressure compressed air: 7–8 bar Operating pressure cooling water: 4 bar Compressed air quality: ISO 8573-1:2010 [1:4:1] Primary circuit flow rate: 1.4 m³/h Cooling water supply temperature min.: 18 °C Cooling water supply temperature max.: 20 °C Cooling medium: Coolflux Nodpfx Aley Rn A Ietewi MACHINE DETAILS Control: SLM MCS Electrical Specifications Connection: CEE 3/N/PE Voltage: 400 ±10 % V Frequency: 50/60 Hz Current consumption: max. 40 A Connected load: 3.5–5.5 kW Heating power: 1,200 W Cooling capacity: 4.6 / 5.8 kW Largest motor: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 2,600 x 1,200 x 2,700 mm Transport weight: 1,870 kg Operating hours: approx. 6,700 h EQUIPMENT Cooling via "Chiller package HRS050 L/W" Sieving station PSM100 V3 Handling device BPH280 and bottle lift (facilitates handling of powder containers and removal of build plates after printing) Material Change Kit SLM280 2.0 complete incl. PSM100 Powder containers Build plates (1.2709 & AlSi10Mg) Additional filter housings Filter elements The system is still in operation and can be inspected by appointment. After the auction ends, the system will be dismantled by the machine manufacturer, loaded on-site, and handed over to the buyer.

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), A repair-needing 3D metal printer from Concept Laser GmbH is available. Technology: Laser Melting (SLM)/LaserCusing. Working dimensions X/Y/Z: 250mm/250mm/280mm. Layer thickness range: 20µm-80µm. Max. scan speed: 6m/s. Focus diameter range: 50µm-500µm. Laser power: 200W. Printing materials: stainless steel/aluminium/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg. Laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg. Blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Includes various printing materials such as titanium plates, steel plates, and aluminium alloys. The machine has CF card faults and the communication between the laser GUI and RCU breaks down. Documentation available. Inspection on site is possible. Nwjdpfjww Ivnjx Altsi

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, skupna dolžina: 2.400 mm, skupna višina: 2.945 mm, skupna širina: 1.300 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 2.900 kg, vhodna napetost: 400 V, laserska moč: 3.000 W, Eden najboljših modelov 3D tiskalnikov za kovine na trgu. Visoka tehnologija, zelo natančen in hiter, omogoča tiskanje iz nerjavnega jekla in titana. Namenjen je letalski industriji, a je uporaben tudi za druge sektorje. Tip stroja: 3D tiskalnik Proizvajalec: GE Additive Nwsdpevmpq Tsfx Altsi Model: Arcam EBM Q20plus Leto izdelave: 2018 Stanje: rabljeno Funkcionalnost: popolnoma delujoče Cena: 59.000 € (naloženo na tovornjak). Najugodnejša cena za tiskalnik takega razreda! Zapakiran v originalne zabojnike proizvajalca, pripravljen za odpošiljanje. Podatki proizvajalca: Maks. velikost gradnje: 350 x 380 mm (Ø x V) Maks. moč žarka: 3 kW Tip katode: enokristalna Min. premer žarka: 140 μm Maks. hitrost pomika elektronskega žarka: 8.000 m/s Aktivno hlajenje: vodno hlajeni toplotni izmenjevalnik Minimalni tlak v komori: 5 x 10⁻⁴ mbar Tipična atmosfera v komori: 4 x 10⁻³ mbar (delni tlak He) Poraba He med gradnjo: 4 l/h Poraba He pri zračenju: 100-150 l/gradnjo Napajanje: 3 x 400 V, 32 A, 7 kW Dimenzije (Š x G x V): cca 2.400 x 1.300 x 2.945 mm Teža: 2.900 kg CAD vmesnik: standardno STL Materiali: - Arcam EBM Ti6Al4V Grade 5, P-Mtrl - Arcam EBM Ti6Al4V Grade 23, P-Mtrl

Stanje: zelo dobro (rabljeno), EOS P 396 laserska sinterna naprava Proizvajalec: EOS GmbH Tip: P 396 Vrsta stroja: Industrijska SLS laserska sinterna naprava za plastične komponente Postopek: Selektivno lasersko sintranje (SLS) Naprodaj je profesionalna industrijska laserska sinterna naprava proizvajalca EOS GmbH. Naprava je zasnovana za aditivno proizvodnjo plastičnih komponent s selektivnim laserskim sintranjem in je primerna za izdelavo prototipov, maloserijsko proizvodnjo, raziskave in razvoj ter industrijsko proizvodnjo. Tehnični podatki Tehnologija: Selektivno lasersko sintranje (SLS) Uporabni gradbeni volumen: 340 x 340 x 600 mm Hitrost gradnje: do 48 mm/h (odvisno od materiala) Debeline slojev: 0,06 mm 0,10 mm 0,12 mm 0,15 mm 0,18 mm Laserski sistem: CO₂-laser Izhodna moč laserja: 70 W F-Theta precizna optika Hitrost skeniranja do 6 m/s Razred laserja 1 Napetost: 400 V 3~ / N / PE Frekvenca: 50 / 60 Hz Nazivna moč: 10 kW Poraba toka: 16 A Varnostno stikalo: 32 A Osnovna oprema: Vgrajen generator dušika Zunanji priključek za dušik na voljo Potreben dovod stisnjenega zraka: najmanj 10 m³/h pri 5.000 hPa Programska oprema EOS PSW EOS RP Tools EOSTATE Vmesniki STL Ethernet Certifikati CE NFPA EN 60825-1:2007 Stanje vzdrževanja Obstoječa aktualna dokumentacija o servisiranju in vzdrževanju. Po obstoječih servisnih poročilih so bila med drugim izvedena naslednja dela: Zamenjava grelnih elementov Zamenjava transportnega traku Čiščenje osi X in vozička Čiščenje laserskega okna in ogledal Zamenjava tesnil Preverjanje varnostnih krogov Docking station / dovod prahu Docking station s pnevmatskim transportnim sistemom za avtomatizirano oskrbo laserske sinterne naprave s prahom. Proizvajalec: HYDAC Cooling GmbH Tip: FWKS-G2-001500-W-W-R25-2-IW-UL Električni podatki: 230 V ±10 % 1 faza / 50-60 Hz Maksimalna poraba toka: 8,0 A ICC / SCCR: 10 kA CE / RoHS Dodatna oprema Krmilna konzola Docking station Pnevmatski transportni sistem 2 x EOS Multibox Kapaciteta posamezne Multibox: ca. 230 litrov Za skladiščenje, zbiranje in transport svežega in uporabljenega prahu. Dimenzije in teža Sistem vključno z upravljalno omaro: ca. 1.840 x 1.175 x 2.100 mm Krmilna konzola: ca. 950 x 700 x 1.550 mm Skupna teža laserske sinterne naprave: ca. 1.400 kg Priporočena površina za postavitev: najmanj 4,3 x 3,9 x 3,0 m Področja uporabe Aditivna proizvodnja Hitro prototipiranje Maloserijska proizvodnja Avtomobilska industrija Strojništvo Letalstvo in vesolje Medicinska tehnika Raziskave in razvoj Obseg dobave EOS P 396 laserska sinterna naprava Krmilna konzola Docking station 2 x EOS Multibox Obstoječa dokumentacija Servisna poročila Pribor in komponente po slikah Stanje Rabljeno Naprava iz industrijske uporabe Vizualno stanje po slikah Obseg dobave kot prikazano Ogled in preizkus na lokaciji po predhodnem dogovoru mogoč in izrecno zaželen. Možna dostava ali pošiljanje s špedicijo. Nwjdpfx Aljzarg Ujtei Razpoložljivost: po dogovoru. Obseg dobave kot na slikah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje.

Stanje: rabljeno, Leto izdelave: 2021, Sinterit Multi PHS + sandblaster – accessories as shown in the photos, 2021 The Sinterit Multi PHS (Powder Handling Station) with sandblaster is a professional post-processing solution designed for SLS 3D printing applications. It enables efficient workflow for powder removal, material handling, and part cleaning, improving cleanliness and convenience during post-processing operations. Nwedeywurvspfx Altsi The offer includes the Sinterit Multi PHS, sandblaster, and the accessories visible in the photos. Year of manufacture: 2021. Key features: - Professional powder handling and post-processing station dedicated to SLS printing - Supports powder cleaning, sieving, and part finishing processes - Includes Sandblaster for cleaning and surface finishing - Accessories included, as shown in the photos - Industrial-grade construction, suitable for professional use Scope of delivery: - Sinterit Multi PHS - Sandblaster - Accessories as shown in the photos - Vacuum cleaner not included

Stanje: zelo dobro (rabljeno), Desktop Metal 3D Printer Complete System We are offering you a complete Desktop Metal 3D printer system. Desktop Metal Studio System 3D Metal Printer Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder, and furnace Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office-friendly X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing and enables new features such as the use of closed-cell infill for lightweight strength. 1.2 Desktop Metal Studio Debinder (debinding machine) Fully automatic debinding Cleaning tank: 17.4 L (in-process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it does not require external ventilation and is safe for office environments. Automatic liquid distillation and recycling mean there is no need to refill between cycles. Njdpfx Alszd Tlljtewi 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305 x 205 x 205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating capacity: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through a standard office door, the furnace offers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure even heating and cooling without the residual stresses typical of laser-based systems. Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you an Objet Stratasys 3D printer. The Objet Connex 500 is the pioneering multi-material 3D printer from Objet. With a large build size of 500 x 400 x 200 mm, designers and engineers can quickly produce prototypes to simulate the intended end product more closely than with any other technology. What makes the Objet Connex unique? With Objet's patented simultaneous multi-material jetting technology, the Objet Connex 500 can print models from up to 14 different materials in a single build job. The system is ideal for designers and engineers who want to effectively showcase the different material components in complex or composite products. Freedom to choose your own materials The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials™. This enables users to simulate various mechanical and physical properties, from rubber-like to rigid, opaque to transparent; and standard to ABS-grade engineering plastics. Outstanding productivity The Objet Connex 500 offers: • Multi-material models – there is no longer any need to design, print, and bond separate model elements Nwsdpfx Aezdnploltei • Different parts. Different materials. Same tray – saves time and fulfills multiple requirements simultaneously • Excellent 16-micron print accuracy with high resolution • 600 DPI X & Y resolution • Thin walls down to 0.6 mm • Large format tray with dimensions of 500 x 400 x 200 mm – allows printing of large parts in a single build or many small parts on a single tray • High throughput – up to 20 mm per hour and pass • Reliability and robustness – at least 72 hours of continuous capacity • High speed – simultaneous printing of multiple items from different materials; models cure as they print; models can be processed immediately after printing • Easily removable support material for complex geometries • Office convenience – quiet system with fully sealed, REACH-compliant cartridges that are easy to load and unload. Reported to be operational by last user. No functional test conducted by our company. Year of manufacture: 2010 Type: Objet Connex500 Condition: used Scope of delivery: (See image) (Specifications and technical details subject to change and error!) Further questions can be answered for you by phone.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.064 mm, laserska moč: 60 W, vrsta hlajenja: zrak, skupna masa: 35 kg, trajanje garancije: 12 meseci, dolžina območja skeniranja: 220 mm, širina območja skeniranja: 220 mm, Integra Fiber Laser – High-Precision Marking Laser for Serial Production & Automation GLT – Grossmann Lasertechnik GmbH Made in Germany • Automated • Industry 4.0 Ready The Integra Fiber Laser is a fully integrated laser marking system for industrial series production, engineered for high cycle rates, precision, and process reliability. Nsdexvtu Dopfx Altowi Combining fiber laser technology, integrated PLC control, and a modular machine architecture, the Integra is ideal for production lines, custom-built equipment, and automated marking stations. Technical Features • Power: 20 – 200 W • Galvo scan head with F-Theta optics for maximum engraving speed • Work area: 100×100 mm to 300×300 mm • Integrated PLC with TCP/IP communication and I/O interfaces • Compatible with LightBurn, EZCAD, or custom software • Optional: camera systems, pallet handling, conveyor integration • CE-certified, low-maintenance, suitable for continuous operation Advantages • Integration system “Made in Germany” – direct from the manufacturer • Custom machine engineering & automation to customer requirements • Full integration into existing production environments • Highest marking quality on metal, stainless steel, aluminium, brass, plastics, and more • German support, online & on-site training, spare parts supply Typical Applications • Serial number and nameplate marking • Barcodes, QR codes, DataMatrix • Cable and connector identification • Tool and automotive industry • Electronics and plastics processing • Contract marking and custom machine engineering Delivery & Service • Delivery time: 3 – 6 weeks • Delivery, installation and commissioning across Europe • Lifetime after-sales support incl. remote maintenance

Stanje: novo, Leto izdelave: 2022, Erittäin nopea 3D-muovitulostin Erittäin nopea 3D-muovitulostin (kasvutilavuus 275x155x400 mm) teolliseen käyttöön ja oppimisympäristöihin. Laite mahdollistaa nopean materiaalinvaihdon sekä tarjoaa laajan valikoiman – yli kaksikymmentä erilaista tulostusmateriaalia. Haasta ruiskuvalun nopeus ja laatu sekä hyödynnä työkaluton tuotannon ylivoimainen joustavuus! Kokonainen metallirakenteinen tulostusjärjestelmä sisältää: Nedpetucr Ijfx Altswi - 3D-muovitulostimen - x-Wash-tuotteiden pesuyksikön - x-Cure-tulosteiden kovetusyksikön NexaX v1 -ohjelmisto Helppo tulostehallinta ja etäohjaus, työjonot, jonotukset ja tilastointi Tämä on täydellinen järjestelmä, joka sisältää 3D-tulostimen, pesuaseman ja kovetuslaitteen. Materiaalit: KeyGuide, KeyModel Ultra – Ivory, KeyModel Ultra – Light Gray, KeyOrtho IBT, KeySplint Hard, KeySplint Soft, KeyTray, PRO9499 White, Saremco Print CROWNTEC, xABS3843, xDENT341-Beige, xESD, xFLEX402-Black, xFLEX475-Black, xFLEX475-White, xMODEL15-Black, xCERAMIC3280, xDENT201-Gray, xDENT341-Beige, xESD, xFLEX402-Black, xFLEX475-Black, xFLEX475-White, xMODEL15-Black, xMODEL15-Gray, xMODEL17-Clear, xMODEL35-Black, xMODEL35-Gray, xMOLD, xPEEK147, xPP405-Black, xPRO1100-Black, xPRO9400-FR

Stanje: zelo dobro (rabljeno), Ekstruder za proizvodnjo filamenta za 3D tisk – 25/25 L/D Ponujamo visokokakovosten ekstruder za izdelavo filamenta za 3D tisk. Naprava je zasnovana za neprekinjeno industrijsko delovanje ter se odlikuje po robustni konstrukciji, natančnem uravnavanju temperature in odlični homogenizaciji materiala. Idealno za proizvajalce, razvijalce materialov in raziskovalne inštitute. Nsdjxwvqqepfx Altewi Tehnična oprema in značilnosti: • Ekstruder 25/25 L/D – učinkovita geometrija polža za enakomerno kakovost taline • Visoko zmogljiva talilna cona – natančen nadzor temperature za konstantno kakovost filamenta • Šoba za 3D-filament ekstrudiranje – primerna za vse standardne premernike filamentov • Hladilna kad – stabilen odvzem filamenta in optimizirano območje hlajenja • Odvzemna enota – fino nastavljiva hitrost odvzema za natančno stabilnost premera • Navijalna in polagalna enota – samodejni prevzem filamenta • Odlično primerno za PLA, PETG, ABS, TPU in številne tehnične materiale

Stanje: zelo dobro (rabljeno), EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The system has been regularly serviced (last service: 08/2024). The unit has been operated exclusively with PA11 (EOS PA1101). System including accessories: 1 x build box, docking station, multibox with cooler. Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been fully tested." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for the additive manufacturing process (Selective Laser Sintering, SLS). The unit is suitable for producing complex plastic components for serial production and prototyping. Base machine with control cabinet & control terminal Interchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Nedpfxszixzis Altowi Parameter set PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C service water Pump capacity: 5 l/min at 3.5 bar Electrical capacity: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. fill: 420 g) The multibox is a typical accessory for powder handling in EOS systems. Used for transport and interim storage of the material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-Theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure field: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): travel 690 mm, max. speed 200 mm/s Z-axis (build platform): travel 650 mm, max. speed 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Extraction chamber heating: 1.6 kW, resistance heating coil with separate temperature measurement Control & Operation: Process computer with Windows 7 operating system 15.1" TFT display, membrane keyboard & mouse Ethernet network connection Other: Sound emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Circuit protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Interchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Subject to technical changes and errors! All information provided without guarantee.) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Concept Laser X Line 2000R BC2 Dual Laser Proizvajalec: Concept Laser GmbH / GE Additive / Colibrium Additive Tip: X Line 2000R BC2 Letnik izdelave: 2015 Tip stroja: 3D-tiskalnik za kovine Postopek: LaserCUSING® / postopek na prašnem sloju Laserski sistem: Dvojni laser (Dual Laser) Obdelovani material: AlSi10Mg Naprodaj je industrijski 3D-tiskalnik za kovine proizvajalca Concept Laser. Sistem je zasnovan za aditivno proizvodnjo kovinskih komponent po metodi prašnega sloja in je primeren za raziskave, razvoj, prototipiranje ter industrijsko serijsko proizvodnjo. BC2 nadgradnja / modernizacija Sistem je bil nadgrajen na novejši standard BC2. Po priloženi dokumentaciji je bila izvedena obsežna posodobitev z zamenjavo številnih sklopov in komponent. Tako ima stroj bistveno posodobljene funkcionalnosti in sistemsko stanje v primerjavi z zgodnejšimi modeli X Line 2000R. Tehnični podatki Priključna napetost: 3P/N/PE AC 400 V ±10 % Frekvenca: 50 / 60 Hz Maks. tokovna obremenitev: 17 A na fazo Dovod stisnjenega zraka: 7 – 8 bar Dovod inertnega plina: 5 bar Hlajenje: sistem s vodnim hlajenjem Dimenzije stroja pribl.: 5.300 x 2.700 x 2.760 mm (D x Š x V) Teža pribl.: 13.400 kg Oprema Dvojni laserski sistem Sistem za ravnanje s prahom Materialni transport Filtrirne enote Dovod procesnega plina Električne omare Upravljalni in krmilni sistem Delovna ploščad z dostopnimi stopnicami Vodno hlajen laserski sistem Obstoječa periferni oprema po slikah Dokumentirane servisne storitve 06/2026 Servis podjetja Colibrium Additive / GE Additive Zamenjava sistema VarioScan vključno z ustrezno E-box enoto Izveden funkcijski preizkus Po končanih delih niso bile zabeležene napake Obratovalni podatki Laser 1 RET: pribl. 26.808 h Laser 2 RET: pribl. 38.419 h Opomba: RET prikazuje čas, ko so bili laserji pripravljeni za delo. Ni enak dejanskemu času osvetlitve ali proizvodnje. Področja uporabe Aditivna proizvodnja kovinskih komponent Letalska in vesoljska industrija Avtomobilska industrija Orodjarstvo in izdelava kalupov Raziskave in razvoj Proizvodnja prototipov Industrijska serijska proizvodnja Nwjdozcn Efepfx Altsi Obseg dobave Glavna naprava Concept Laser X Line 2000R BC2 Komponente za ravnanje s prahom Filtracijska tehnika Obstoječa periferna oprema po slikah Dodatna oprema po trenutnem obsegu dobave Stanje Rabljeno Stroj iz industrijske proizvodnje Lasersko okno čisto in prozorno Vizualno stanje po slikah Ogled možen po predhodnem dogovoru Zaradi velikosti in teže priporočamo strokovno demontažo, nakladanje in organizacijo transporta. Razpoložljivost: po dogovoru. Obseg dobave kot na slikah. Spremembe in napake v tehničnih podatkih ter vmesna prodaja pridržani.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, Stroj je v dobrem delovnem stanju. Nwedsy Dfpfopfx Altoi

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 24 h, Manufacturer: DURMA Model: HD-TC 60170 Fiber Year of manufacture: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. tube diameter: 170 mm Min. tube diameter: 20 mm (12 mm optional) Max. dimensions for square profiles: 120x120 mm Max. dimensions for rectangular profiles: 150x100 mm Max. profile length: 6500 mm Nwodpfx Asdx Nfwjltsi Min. profile length (for automatic feeding): 3000 mm Max. profile weight: 37.5 kg/m Max. material thickness (for 2 kW): 8 mm Min. material thickness: 0.8 mm Length of last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeatability: +/- 0.05 mm Max. loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical, H, C, U, L *Footprint (L/W/H): approx. 16,000 x 7,400 x 2,350 mm *Weight: approx. 20,000 kg *Depending on equipment variant Standard equipment Siemens Sinumerik 840D control Auto-focusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for position point determination Central lubrication Chip conveyor External user interface for analog output (power-speed-pressure) External CAD/CAM programming software Lantec with auto-nesting Work area lighting Warning signal lamp Selectable laser cutting options Remote Control: remote maintenance access via LAN or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. chiller) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our premises in Staufenberg. We will gladly provide you with further information upon request.

Stanje: novo, The Durma 5-axis fiber laser cutting system will be your best partner for manufacturing automotive and other highly precise, complex 3D components. The system offers 25% more processing area than machines with the same concept. For impeccable cutting performance, the highly robust machine frame and rotary table deliver top quality. The user-friendly fixture system allows you to save time. Thanks to components from leading manufacturers and the use of high-quality materials, no maintenance or service is required. High-quality 3D cutting can be achieved. This technology reduces energy consumption and increases company profitability. The machine stands out for its speed, reliability, and design. HD-FA Technical Data Available in 2, 3, and 4 kW X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm B-axis: ±135° C-axis: ±360°xn Max. vector speed: 173 m/min Max. vector acceleration: 1.73 G Positioning tolerance: ±0.08 mm Repeatability: ±0.08 mm MACHINE DIMENSIONS Machine size: 6,168 mm x 3,936 mm h = 3,700 mm Working area: 9,000 mm x 10,000 mm (safe area) Rotary table door clearance: 4,000 mm Machine weight: 16,000 kg Nwedpjg Adknjfx Altsi Cutting head: Type: 3D Focus type: Automatic Controller: CNC Siemens Sinumerik 840D SK Display: 19-inch touchscreen Filter Capacity: 2,500 m³/h – 4 kW

Stanje: novo, Leto izdelave: 2025, Are you looking for a real machine and not a toy? Then you’ve come to the right place: Nwsdpfx Aljcuiz Tstsi Film labelers – Label printers – Nameplate marking machines (*Prices vary depending on configuration and laser power; this is a brand-new laser machine manufactured in-house) Laser Marker skyLASER Mark 500 – 2D Fiber Laser Engraving/Marking System: The complete solution for your complex laser engraving applications. Important: Compare the installed components in available laser systems. We use ONLY top-quality German-made components: Scanlab® scanner, IPG Photonics® laser source, Parker® axes, Schneider Electric® motors, Scanlab® controllers, German software, cabling – all components produced exclusively in Germany! All machines are 100% custom-built at our factory in Plauen according to your specifications! Competitors often use Chinese components (note: the controller is often EZCAD = Chinese origin!!) (*The stated price may vary depending on configuration; pictures show different equipment variants. You receive a brand-new laser unit, manufactured by us.) Our skyLASER Mark systems are used precisely where conventional CO2 laser technology reaches its limits. The fiber laser with a 1064nm wavelength enables even the most intricate work on almost any material. Unlike traditional milling processes, the laser works contact-free, force-free, and with no tool wear. The clear benefits for your application: geometric flexibility and high processing accuracy. This processing method can be applied regardless of the workpiece’s hardness. The mobile, customizable working table further increases system flexibility. Easily integrate the system into your production line or use it as a stand-alone solution. Our skyLASER Mark units deliver extremely precise and durable markings (laser engravings) and are especially suitable for metal marking and selected organic materials. A wide range of fonts, barcodes, serial numbers, logos and images can be applied effortlessly. Thanks to excellent resolution, virtually all marking requirements are met. Whether you need embossing dies, engravings, labels or complex fine structures – our extremely user-friendly software makes it easy. Even demanding, intricate marking tasks are quick and simple on the included industrial PC. Accurate positioning is straightforward, thanks to the optional process monitoring camera and software-assisted part alignment. With virtually no wear parts and IPG laser technology for near-zero maintenance, this system is ideal for industrial and continuous operation. skyLASER Mark Marking/Engraving System at a glance: - Working area: from 110 x 110 mm, 120 x 120 mm, or 300 x 300 mm (depending on F-Theta lenses/3D option) - Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) - SCANLAB galvanometer scanner - Nominal laser power: 20W - New, optional: software-controlled, variably adjustable working width (X-axis max. 450 mm depending on configuration)

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, new PMH filament production line 30 mm extruder – 28 L/D with die for 3D filament extrusion with cooling bath with residual water blower twith laser measurement system (optional) with haul-off unit Nwedpfxjch Sfqs Altji with filament accumulator (optional) with winder and traversing device MADE in GERMANY

Stanje: rabljeno, Leto izdelave: 2018, 3D printer Laser type / power: Yb fiber laser / 250 W Wavelength: 1070 nm Lens: F-theta precision lens Build volume: Ø 100 mm x 100 mm Reservoir volume: Ø 200 mm x 200 mm Coater: Rotation-guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 – 100 μm Scan speed: Jog 20 m/s, Operation 6 m/s Spot size: min. 40 μm Chamber opening: 450 x 180 mm Nsdpfsvtftqex Altowi

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, skupna masa: 2.200 kg, gradbena višina: 500 mm, gradbena širina: 800 mm, Brez minimalne cene – zagotovljen nakup po najvišji ponudbi! Nedpfxjzkvpye Altewi Prvotni tiskalnik je bil leta 2025 nadgrajen z nadgradnjo, vredno 135.000 €, na tip J4100! Ta je praktično skoraj nov! TEHNIČNE PODROBNOSTI Maksimalna velikost tiska: 1.000 x 800 x 500 mm Maksimalna debelina plasti: 27 µm Visoka hitrost: do 3 osnovnih smol, 27 m ločljivost Izjemno visoka hitrost: 1 osnovna smola, 55 m ločljivost PODROBNOSTI O STROJU Napajanje: 110–240 V Dimenzije in teža Dimenzije: 2.870 x 1.960 x 2.105 mm Skupna teža: 2.200 kg OPREMA Zamenljiva tiskalna plošča z mobilnim dvižnim okvirjem Različni rezervni deli PolyJet UV tehnologija

Stanje: rabljeno, Leto izdelave: 2016, Proizvajalec: LEICA, tip: Absolute Tracker AT960-MR, leto izdelave: 2016, serijska številka: 750931, skenirni modul, T-Scan 5, tipalski modul T-Probe iii, stativ, 2 transportna kovčka, programski ključ, upravljalna enota, prenosni računalnik. Proizvajalec: Dell, Precision 7710, Intel Core i7, 2 x 27-palčni TFT-monitor, proizvajalec: Dell, brezžična tipkovnica, brezžična miška. +++ Pomembno: Naprava je del spletne dražbe! +++ Nedpfx Alozn Ar Aotewi

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), Rolleri C-UP-1500 EVO Support Bar Cleaner Nwedpfx Alewtqqyjtoi for cleaning support slats on flatbed laser machines Milling unit with pneumatic pull device for bridge widths of 3 and 4 mm Handle length 2000 mm for laser systems with a working width of 2000 mm Demonstration unit

Stanje: pripravljen za uporabo (rabljen), največja višina reza: 87 mm največja dolžina reza: približno 200 mm premer žaginega lista: največ 250 mm hitrosti vrtenja žaginega lista preko menjalnika: približno 90–4000 vrt/min pogonski motor: 380 V, 1,2 kW Nedpfx Aoznh Hfjltswi potreben prostor: 1050 x 750 x 1100 mm teža: približno 210 kg

Stanje: pripravljen za uporabo (rabljen), Zeiss MC 850 – 3D-koordinatni merilni stroj Merilno območje x: približno 800–850 mm Merilno območje y: približno 1200 mm Merilno območje z: približno 600 mm Nova programska oprema 2025 Dodatna oprema: Računalnik Menjalnik Tipka Nedpfoznkuljx Altswi Vabljeni, da nas obiščete in si ogledate stroj. Z veseljem vam lahko uredimo tudi cenovno ugodno logistiko! Prejeli boste ustrezno račun. Za tuje stranke je možen tudi račun brez davka. Pogoj je veljavna številka identifikacije za DDV. Pridržujemo si pravico do sprememb in napak. Obiščite našo spletno trgovino in si oglejte tudi naše druge ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih lastnikov in se uporabljajo samo za identifikacijo in opis izdelkov. Odstopanja od tehničnih podatkov in morebitne napake v opisu izdelka so možne in so pridržane.

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 53005011, premer žaginega lista: 500 mm, hitrost žaginega lista: 2.800 obr/min, obratovalni tlak: 7 letvica, stroj je delno funkcionalen, oba motorja delujeta in elektronika je v redu. Nwodpfx Aszli Ifeltoi stroj ni bil uporabljen od leta 2019 in rezal je samo PVC, obe glavi sta gibljivi. potrebno je izvesti splošen pregled in vzdrževanje.