Cms Cnc Obdelovalni Center nakup rabljenega (29.235)

Stanje: potreben popravila (rabljeno), Leto izdelave: 2014, številka stroja/vozila: AA2/002546, število mest v zalogovniku orodij: 24, skupna masa: 6.600 kg, dolžina mize: 5.200 mm, širina mize: 1.300 mm, TEHNIČNI PODATKI Dolžina mize: 5.200 mm Širina mize: 1.300 mm Število rezkalnih vreten: 1 Tip rezkalne mize: nosilna miza Pozicije menjalca orodij: 24 PODROBNOSTI O STROJU Napetost: 400 V Poraba toka: 64 A Mere & teža Dimenzije (D x Š x V): 10.300 x 2.450 x 2.800 mm Lastna teža: 6.600 kg Transportni paketi: 1 OPREMA Vrtalno orodje Vakuumska črpalka Orodja Vakuumska črpalka Becker Vtlf 250: - Leto izdelave: 2008 Fedpjy Nybtefx Aplopg - Glavna moč motorja: 5,5 kW - Priključni premer: 70 mm - Brezoljna: Da Opomba: Stroj je potreben popravila. Obstaja težava s CAN-bus sistemom.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, številka stroja/vozila: 89867, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.765 mm, pomik osi Y: 1.875 mm, pomik po osi Z: 324 mm, število mest v zalogovniku orodij: 12, skupna masa: 4.000 kg, TEHNIČNE PODROBNOSTI Delovno območje X-os: 3.765 mm Delovno območje Y-os: 1.875 mm Delovno območje Z-os: 324 mm Dolžina mize: 3.600 mm Širina mize: 1.800 mm Sistem za vpenjanje orodja: HSK-F63 Položaji menjalca orodij: 12 kosov PODROBNOSTI STROJA Število rezkalnih vreten: 1 kos Fjdpfoy Nxybjx Aplspg Teža: 4.000 kg Transportni paketi: 1 kos OPREMA Ravna miza Sistem/programska oprema BiesseWorks Varnostna preproga Vrtalno orodje vključeno Žagalna enota vključena Stroj za etiketiranje Nalagalni sistem Sistem za razkladanje

Stanje: novo, Leto izdelave: 2024, X-os: 4.400 mm Y-os: 1.600 mm Z-os: 900 mm Hitrost vretena: 2.000 - 24.000 vrt/min Pogonska moč: 14 kW Vpenjalo za orodje: HSK 63 Fpedpfx Ajy Ix Upsplsg Menjalec orodij: 12 pozicij Krmiljenje: SIEMENS SINUMERIK ONE Stroj še nikoli ni bil postavljen in je takoj na voljo.

Stanje: rabljeno, Leto izdelave: 2023, Exhibition machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of milling and drilling tools to meet every woodworking requirement. Highly efficient – with drilling spindles up to 8,000 rpm and industry-leading technology, offering the most robust spindle on the market with over 1,000 maintenance-free operations. Fully equipped – the suction cups can be individually configured using the TV FLEX worktable to tailor the machine to any specific need. Easy and intuitive programming is ensured by the integrated Cad-Cam MAESTRO CNC software. User-friendly operation – the lowered machine frame allows for unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and in the PRO SPACE version, no additional safety measures are required. Support structure The supporting structure consists of an exceptionally sturdy monolithic steel base, heavily ribbed for maximum robustness. The extra-wide support was specially designed to ensure stability and consistent precision under all operating conditions. Floor anchoring is not necessary. The base provides a large and solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support to withstand the most demanding workloads, ensuring superior quality and increased accuracy. The moving portal is fabricated from a solid single piece that is anchored to the base and travels on prismatic guides with recirculating ball carriages of the highest quality. The working unit is attached and moves on Y and Z axes, also on prismatic guides with recirculating ball carriages. Motion for the lower moving unit (X axis) and the working unit along the gantry traverse (Y axis) is accomplished via rack and pinion drives with helical gears, providing higher tooth engagement for greater acceleration and increased speed along X and Y axes. The specially designed helical gearing greatly reduces wear on mechanical parts and ensures quieter operation. The vertical Z axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic load and withstanding high acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, delivering extremely high finishing quality due to the elimination of vibrations. Movement along the X-Y-Z axes is performed by brushless motors powered by static inverters, offering: - Reduced processing times thanks to improved acceleration - Better positioning accuracy due to high-resolution encoders - No setup required upon machine start-up thanks to absolute encoders - Elimination of regular maintenance since the brushless system contains no brushes. Axis movement and all working elements are managed by... Fsdpfxjytrgzo Apljpg

Stanje: rabljeno, Leto izdelave: 2005, Used machine Year of manufacture: 2005 Features and Technical Data: - Base machine 555 Fpodpfx Aex Enpqsplsg - Processing dimensions for edge milling: - X = 3514 mm - Y = 1544 mm - Maximum processing dimensions: - X = 3868 mm - Y = 1746 mm - Z = 325 mm - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in X-axis and 6 in Y-axis - individually selectable - T-shape arrangement - max. drilling diameter 35 mm (depending on panel thickness) - spindle stroke: 70 mm - rotation direction: alternating clockwise/counterclockwise - speed: 4725 rpm, infinitely variable - 2 horizontal drilling units in X-direction, 1 horizontal drilling unit in Y-direction - Saw unit 7946: - Motor: 3.5 kW - 90° pneumatic swivel - speed: 5300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - sawing/grooving in X and Y directions - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for mortise lock case milling - Tool changer 7996: - 18-position magazine (carousel) - Vacuum pump with 140 m³/h - Hand-held control device - PC control with TwinCAM WOP system - Siemens control Availability: short-term Storage location: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical system 3x400V 50/60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable height-adjustable extraction hood – motorized control - Full nominal power at approx. 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Drive: 3-phase high-frequency motor, inverter-controlled - Rotation direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Max. saw blade Ø 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools), featuring digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made of thick-walled, electro-welded box sections. The steel ribbing inside the frame ensures high stability. - Machining area H350 16.30: Travel axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm pass-through height Axis positioning speeds: Depend on the selected safety system (see layout for details). - Dual-drive gantry - X-axis guidance system: The drive for the X-axis gantry is via a rack-and-pinion with helical crowned teeth – ensuring maximum precision. The reduction gearbox provides the highest machining and repeat accuracy. Bearings are precision, encapsulated ball bearing carriages running on hardened and ground linear guides. Fjdpfey Ih Rgox Aplopg - Y-axis guidance system: Bearings are precision, encapsulated ball bearing carriages running on hardened and ground linear guides. The Y-axis is positioned via a ground ball screw. - Z-axis guidance system: Bearings are precision, encapsulated ball bearing carriages running on hardened and ground linear guides. The Z-axis is positioned via a ground ball screw. - Automatic central lubrication system: Grease is automatically and precisely delivered to the guide carriages of the X, Y, and Z axes as well as to the ball screws of Y and Z. Lubrication cycle is performed automatically after a defined interval. - 12-position linear tool changer on the left of the machine frame including a pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and provides sufficient space for milling tools. One aggregate station (configuration options, see layout). Max. tool diameter: 250 mm Max. tool length: 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in X-direction and 5 spindles in Y-direction. Horizontal 6 spindles: 4 spindles in X-direction and 2 spindles in Y-direction. Stroke = 70 mm Max. drill bit length = 70 mm, shank diameter = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – X-direction Max. saw blade diameter: 120 mm Max. bla...

Stanje: rabljeno, Leto izdelave: 2005, Machine d'occasion Année de fabrication : 2005 Équipement et données techniques : Machine à consoles (6 pièces) Courses : X = 3490 mm Y = 1690 mm Z = 205 mm Dimensions d'usinage : X = 3050 mm Y = (dimension de fraisage max. - rayon de l'outil) 1345 mm Z = 150 mm Tête de perçage TF 20 Puissance : 2,2 kW 8 broches verticales, entraxe 32 mm en X 6 broches verticales, entraxe 32 mm en Y 2+2 broches horizontales en X 1+1 broches horizontales en Y avec lame à rainurer intégrée 120 mm avec électrobroche 9,2 kW avec attachement ISO-30 avec axe C avec agrégat angulaire avec changeur d'outils 12 positions avec emplacement de changement d'outil pour agrégat angulaire avec pompe à vide 80–100 m³/h Puissance totale installée : 16 kW Fjdoy Ih Rmepfx Aplspg Air comprimé : 6 bar Consommation d'air : 210 NL/m Bouche d'aspiration : 250 mm Débit d'aspiration : 5300 m³/h Vitesse d'aspiration : 30 m/sec Dimensions : 5940 x 3800 x 2510 mm Poids : 3700 kg Disponibilité : à convenir Lieu : 63934 Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, Pomiki osi (X,Y,Z): 2500 x 1300 x 180 mm Število vreten navpične vrtalne glave: 1 kos Premer odsesne cevi: 120 mm Število rezkalnih agregatov: 1 kos Skupna potrebna moč: 4,3 kW Teža: 1500 kg Mere (dolžina/širina/višina): 3800 x 2300 mm Moč motorja: 2,2 kW Zmogljivost črpalke: 100 kg/h - Rezkalna miza kot vakuumska miza, sestavljena iz štirih nastavljivih modulov Fjdpey N D Rxefx Aplspg - Krmilna programska oprema Beamicon 2 - CAD licenca Rhino 7.0 - Senzor dolžine orodja - Enostransko nameščen laserski skener - Ročna upravljalna enota

Stanje: rabljeno, Leto izdelave: 2011, AXES Working area X-Y-Z axes * mm: 3050-1300-180 Workpiece length in pendulum operation mm: 1390 Stroke X-Y-Z axes mm: 3460-1735-250 Max. traverse speed X-Y axes m/min: 60 WORK TABLE Number of workpiece supports and vacuum suction pads: 6 / 2 standard type Standard end stops / position: 1 / rear Vacuum pump m³/h: 90/108 DRILLING UNIT Vertical spindles std./number/speed rpm: 12 (8X-5Y) / 4000 Horizontal spindles std./number/speed rpm: 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/rpm: 120 / 6000 Motor power kW (hp): 2.2 (3) ELECTROSPINDLE Motor power std. / opt. (S6) kW (hp): 7.5 (10) / 11 (15) Max. speed rpm: 24,000 Fpodpfeyymz Uex Aplog Tool changer, traveling with the support in X: 4 positions, pneumatic INSTALLATION Installed power KVA: 23–28.5 Compressed air requirement Nl/min: 450 Extraction air requirement m³/h: 1900+1900 (3400) Required extraction air speed m/sec: 30 Extraction port diameter mm: 150+150 (200) Machine weight kg: 3000 * X Distance between stops – Y cutter center as reference; Z workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center in frame design with work table equipped with adjustable workpiece supports and vacuum suction pads, suitable for: - Vertical drilling on the panel surface - Horizontal drilling on all four panel sides - Groove milling with disc cutter in the X direction - General milling operations Self-supporting structure and work table: Steel welded frame construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or optionally different support carriers. Box-type construction made from cold-rolled steel with internal reinforcement ribs, protective covers with component group consisting of a drilling head with vertical and horizontal spindles, integrated grooving and saw unit, and an SCM electrospindle with quick-change tool system type HSK 63 F. Travel paths of the portal and support carrier: Movement in the X, Y, and Z axes takes place on linear prismatic recirculating ball guides with preloaded bearings. Movement transmission of the X-axis (moving stand) is via a preloaded, backlash-free rack-and-pinion drive with helical gears. Movement of the support carrier in Y and Z directions is via preloaded ball screws. Positioning of the working units and machine functions is managed by "brushless" AC servomotors and digital drives. CNC CONTROL UNIT The control unit consists of a numerical control for milling and drilling machines and a connected PC with a graphical user interface "XILOG PLUS". - PC-Office operating system Windows XP - Color LCD screen 17" - QWERTY keyboard - Swivelling control panel - Machine interface software Xilog Plus Xilog Plus features: Programming - Parametric, graphical and ISO programming - Import of DXF and ASCII files - Straight line or circular interpolation in three axes, linear in space, spiral on the chosen plane - Assisted programming with graphical and syntax help for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on inclined or curved panel edges - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional features - Calculator for direct data transfer - S

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VMX1-06203123BEB, potovalna razdalja osi X: 660 mm, pomik osi Y: 355 mm, pomik po osi Z: 455 mm, hitro pomikanje X-os: 19 m/min, hitri pomik os Y: 19 m/min, hitri pomik na osi Z: 13 m/min, nazivna (navidezna) moč: 13 kVA, proizvajalec krmilnikov: HURCO, model krmilnika: ULTIMAX, skupna višina: 2.600 mm, skupna dolžina: 2.500 mm, skupna širina: 2.000 mm, širina mize: 355 mm, dolžina mize: 760 mm, obremenitev mize: 340 kg, skupna masa: 3.000 kg, največja hitrost vretena: 10.000 obr/min, število mest v zalogovniku orodij: 16, montažni premer: 40 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vhodni tok: 33 A, HURCO VMX 1 CNC vertikalni obdelovalni center - Pozor: brez primežev, ki so vidni na fotografijah! Pozor: artikel mora biti zavezujoče prevzet med 23.06. in 25.06.2026, točen termin bo dogovorjen. Fsdjy Iwnzepfx Aplspg FCA D-73230 Kirchheim Teck – naloženo na tovornjak.

Stanje: rabljeno, Leto izdelave: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Features and technical data: X = 1800 mm Fjdpfx Aow Nadysplepg Y = 900 mm Z = 80 mm Constructed from 18 mm Koskisen panels, comprising a milling table (X-axis), a gantry (Y-axis), and a Z-axis. Milling bed made of 19 mm MDF as a sacrificial plate with guide rails and T-slot nuts for clamping. Base frame with struts, filled with polymer concrete, prepared for transport by pallet jack or forklift. Mechanical set consisting of profile guides including carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control set consisting of a Triple Beast controller for three axes, with Ethernet connection. Leadshine driver for the fourth motor. Four stepper motors, 5.0A, 3Nm, with motor cables, as well as a 48V, 6.7A switching power supply, LED board for breakout board, ribbon cables and proximity sensors, as well as accessories such as wire leads, ferrules, control cables, heat shrink tubing, and cable lugs. Fully installed in an aluminum housing, including electrical kit and emergency stop. 21.5 inch built-in monitor, including mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, and mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining length and updating the active zero offset. Special features: High-frequency spindle with 2.2 kW, including lock nut, frequency inverter, line filter, braking resistor, and collet set. PC with 8 GB RAM and AMD processor CAD software Rhino 5.0 for creating both simple 2D data and 3D solids Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Chip conveyor 1 Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface HSK 63F 18 kW inverter, stepless, constant power output Max. rotation: Fpjdpfexy Tmnex Apljg B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions.

Stanje: rabljeno, Leto izdelave: 2016, Delovno polje: X=3300 mm Y=1280 mm Z=150 mm Višina prehoda Upravljalni terminal: 24" barvni LED zaslon Ročni terminal za upravljanje hitrosti osi Programska oprema: "Woodflash" Vakuumska črpalka 90 m³/h/50 Hz oziroma 108 m³/h/60 Hz Rezkalno vreteno 12 kW HSK F63 (12.000 vrt./min) 12-pozicijski linearni menjalec orodja na levi strani stroja + pick-up prostor Vrtalna glava DH 16 4H 2S: 12 navpičnih vreten 4 vodoravna vretena 2 utorni žagi Lokacija skladišča: Nattheim Fpjdpsxy Tlwjfx Aplsg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, številka stroja/vozila: 0 - 250 - 04 - 0558,

Stanje: zelo dobro (rabljeno), 4-Achs (X-Y-Z-C) CNC-Bearbeitungszentrum zum Fräsen, Bohren, Schneiden und Kantenanleim. Schwanenhals Maschine PC-Steuerung Typ ?? / Software Biesse Works Nr. 1 Arbeitstische zur Unterstützung/console Nr 10 ATS (L = mm 1800) Automatischer WechselSystem der Werkzeugen (Lager/Fach Nr. 14) Nützliche Arbeitsbereich (X - Y - Z) mm 6735 x 1650 x 290 Fjdpfxjy Nk R Es Apljpg Nützliche Arbeitsbereich (X - Y - Z) in Verleimung mm 5780 x 1650 x 60 Nr 2 Arbeitsbereiche - Vakuumpumpe (Kapazität m3 / h) 250 Sicherheitstrittmatten Vorder Motorisierte Teppich, um die Abfälle aus dem Arbeitsprozess zu evakuieren Gesamtanschlusswert Kw 31.13 Arbeitsgruppen (Oben) Nr. 20 Unabhängige vertikale Bohrspindeln Nr. 8 Unabhängige horizontale Bohrspindeln Nr. 1 Vertikaler Frässpindeln HSK F63 (Kw 13,2) Nr. 1 Rundsäge Verleimaggregat (Leim Hot Melt) Rollenmaterial (Kanten) Dicke (min/max) mm 0,4 - 3 Kantenmagazin für Rollen (fach Nr. 4)

Stanje: rabljeno, Leto izdelave: 2005, Delovno območje: X=2970 mm / Y=1725 mm. Hitrosti pomika osi: X=60, Y=45, Z=25 m/min. Teža: 3200 kg. Lokacija skladišča: Nattheim. Fpedpfsw Dcccox Apljg

Stanje: rabljeno, Leto izdelave: 2007, Pomik osi: X=4400 mm, Y=2195 mm, Z=440 mm Delovno polje v X=3650 mm, Y=1560 mm Prehodnost: 330 mm Elektrovreteno SCM Power 2000 Visokohitrostno rezkalno vreteno z močjo 13 kW Rotacijska os Vector (C-os) Ventilator za čiščenje orodja na rezkalni enoti Vpenjanje orodja HSK 63 F Hitrost vrtenja 600 – 24.000 1/min brezstopenjsko preko inverterja Moč motorja 8,5 kW Nosilci orodja: 6 kos Menjalnik orodja: Rapid 12 (12 mest) Vakuumska črpalka 250 m³/h / 5,5 kW Maks. vakuum: 0,9 bar Referenčni prisloni na straneh mize Vrtalni agregat z 11 vreteni (7 vertikalnih / 4 horizontalni) Krmiljenje: NUM serija 1000 Uporabniški vmesnik: XILOG Plus PC Office Hardware WINDOWS XP Professional Skupna priključna moč: max. 27,5 kW Teža: 5200 kg Skladišče: Nattheim Fjdpew Dcb Sjfx Aplspg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, used CNC machining center Manufacturer: IMA Model: BIMA 300 125/430 Year of manufacture: 2008 4-axis CNC machining center with console table 8 manually adjustable supports along X-axis, each console equipped with 3 vacuum suction cups, vacuum pump 90 m³/h vacuum connection for templates LED display for suction cup position indication Working area X: 200 – 4300 mm Working area Y: 0 – 1400 mm for milling/drilling Working area Z: 12 – 125 mm (clearance 150 mm) additional central row of stops 14 vertical drilling spindles + 6 horizontal horizontal drilling and grooving saw unit, 90° swiveling Milling spindle 7.5 kW up to 18,000 rpm with C-axis, 360° interpolation, liquid circulation cooling – 18-position tool changer mounted on Y-support Edgebanding unit VT 100, 4-sided/around the perimeter – rotation range 740 degrees Fpedpfx Apsy Nzw Nelsg with 2-position roller magazine, automatic granulate feed Adapter units: – Fixed 90° saw – 4-spindle cross head Control: ICOS open 231 with 17″ TFT UPS ImaWop 10.0 incl. MDC and production list software Safety fencing on the right side and tread mats at the front; rear: requires wall mounting or separate safety measures

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Fpsdpfjvwbp Asx Apljg

Stanje: rabljeno, Leto izdelave: 2011, Obdelovalna velikost v X-smeri: 2770 mm Fedpfx Asvvi Htjpljpg Obdelovalna velikost v Y-smeri: 1220 mm Obdelovalna debelina (Z-mera): 80 mm Zasnova stroja: portalni stroj Moč glavnega vretena: 11,0 kW Hitrost glavnega vretena: 1500 - 24.000 obr/min Vektorsko vodeno vreteno: Da Vpenjalni sistem: HSK 63 F Hlajenje vretena: zračno hlajenje Število osi: 3 Menjalec orodij: Da, kos Število mest za menjavo orodij: 10 kos Pisalniška tipkovnica: Da Miška: Da Programski sistem: Xilog Plus DXF vmesnik: Da Možna spletna povezava: Da CD-ROM pogon: Da Izvedba mize: rešetkasta miza Ustavljalni sistem: ustavljalni valj Število vakuumskih črpalk: 1 Moč vakuumske črpalke: 250 m³/h Zavarovanje: varnostne pohodljive preproge Lokacija skladišča: Sonnefeld

Stanje: rabljeno, Leto izdelave: 2004, Lokacija skladišča: Nattheim Fedpfx Aevvi Hysplspg

Stanje: rabljeno, Leto izdelave: 1994, Lokacija skladišča: Nattheim Fsdpfx Ajwmm Nroplopg

Stanje: rabljeno, Leto izdelave: 2002, Obdelovalne mere (premer orodja 25 mm): X=3015 mm Y=1483 mm Z=325 mm Maks. hodilci: X=3268 mm Y=1483 mm Z=325 mm največja programska hitrost: X/Y = 75 m/min / Z = 30 m/min Orodni nosilec HSK 63F Vrtalna enota 7964, 14 vertikalnih vrtalnih vreten s 32 mm razdaljo (10 v x / 4 v y) Žagalna enota 7946, 3,6 kW, pnevmatsko vrtljivo za 90° Glodalna enota 7933, 9 kW Lesena C-os (vektorska os) Magazin za orodja (krožnik s 6 mesti) Ročna upravljalna naprava Laserska naprava (pozicioniranje sesalcev) PC upravljalna konzola z 17" monitorjem Operacijski sistem Windows 2000 Programska oprema: TwinCAM32 - office verzija Vakuumska črpalka 100 m³/h suhi tek Selektivne varnostne stopalne preproge (3-polno delitev) Lokacija zaloge: Nattheim Fedpfxovvi Nbj Apljpg

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The machine base is a monolithic design made from thick-walled steel. It is reinforced throughout the entire machine bed with welded triangular plates, which ensures exceptional rigidity. The use of a large-base triangular form in load-bearing components is key to ensuring lasting precision and stability. The machine layout allows an optimal workflow for the operator while requiring minimal space. This robust base offers the processing unit a balanced and secure foundation with excellent load distribution. The mobile gantry unit carrier is built from a solid monoblock. It moves in the X direction on prismatic, ground guides with recirculating ball carriages. Mounted on the mobile unit carrier, the processing unit also travels on prismatic, ground guides and recirculating ball carriages. Axis Movement: The drive system in the Y and Z axes utilizes precision-ground recirculating ball screws of the highest accuracy grade. The drive in the X-axis is by a backlash-free, preloaded precision rack and pinion system. This enables balanced load distribution during positioning. Such characteristics are essential for smooth operation, even in complex machining scenarios. Axis movement is powered by brushless AC servo motors, which provide excellent positioning speeds thanks to very short ramp times. The feedback systems are fully integrated into these motors, making the drive system entirely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection): 0.9 bar Control System / Control Cabinet · Office PC or industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote controller with main functions ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC provides the NC control with a unique level of familiarity: the software operates on Windows XP and allows fast and easy programming, which is also easy for inexperienced users to learn. The system is open, supporting connections for CD-ROM drive, sound card, barcode reader, modem, printer, scanning systems, etc. Installation of all network systems and any commonly available CAD programs is also possible. To save space, the control cabinet is located beneath the machine table, and the operator works from a separate, mobile control terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software Features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Supported programming Fsdsvvi Nzepfx Aplspg - Calculator for direct data transfer - Graphics and syntax help for drilling and milling operations - Parametric programming to perform identical panel processing on different p...

Stanje: rabljeno, Leto izdelave: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE – WORK CELL VERSION X400 CELL Drilling and milling, made for you! This numerically controlled machining center comes equipped with a comprehensive range of milling/drilling tools to meet any requirements for processing wood and similar materials. - Highly efficient, equipped with drilling spindles at 8,000 rpm and the most robust spindle technology available on the market, offering more than 1,000 maintenance-free operating hours. - Superior and more comprehensively equipped: various configuration options via the multifunction table, allowing the machine to be optimally equipped according to specific requirements. - Easier and more intuitive programming, thanks to the integrated Maestro CNC CAD/CAM module. - User-friendly: The work table is always accessible, the control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, there are no safety barriers. Load-Bearing Structure The load-bearing structure consists of a particularly robust monolithic steel base, heavily ribbed and very rigid. The especially wide support surface was specially designed to provide the machine with maximum stability, ensuring lasting precision regardless of operating conditions, and does not require anchoring to the floor. The base forms a large and solid support for the moving gantry: the work unit is thus equipped with a balanced, stable, and highly resilient support, capable of withstanding even the most demanding stress loads, leading to improved performance quality and greater accuracy. The moving gantry is a solid single component anchored to both sides of the base and slides along prismatic guides with recirculating ball shoes of the highest quality. Dual motorization along the X-axis ensures top performance even under heavy-duty operating conditions. Movement of the lower mobile unit (X-axis) and the working unit along the beam of the mobile unit (Y-axis) is achieved via a helical rack and pinion drive. This provides greater tooth-on-tooth engagement, achieving higher acceleration as well as increased speed along the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic loads and allowing for strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis slide, ensuring the finest machining quality by eliminating vibrations. Fpedpfxovvi N Is Aplog Movement along X-Y-Z axes is provided by brushless motors, powered by static inverters, delivering: - Reduced processing times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders - No more reference point setup at machine startup due to absolute encoders - Eliminated general maintenance for the drive system since the brushless system contains no brushes Management of axis movements and general machine components is performed via an industrial NS module with digital D...