Cetingil Peskanje Komore nakup rabljenega (403)

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, A Blast Room is an enclosed space used for cleaning, roughening, or preparing surfaces made of metal, concrete, stone, or wood. Inside the chamber, abrasive material (e.g., quartz sand, steel shot, aluminum oxide, corundum, or glass beads) is propelled at high speed using compressed air. This process removes rust, paint, oxides, or contaminants and achieves the desired surface roughness. Main Components of a Sandblasting Room: Working Chamber: Steel structure with walls lined with wear-resistant materials. Blasting Equipment (nozzle system): Mixes compressed air with abrasive material and directs it onto the surface to be treated. Dust Extraction System (air filtration): Removes dust from the air to maintain a clean working environment. Abrasive Recovery System: Collects used abrasive, cleans it, and enables its reuse. Operator Equipment: The operator wears protective clothing, an air-fed helmet, gloves, and a coverall. DIMENSIONS OF SANDBLASTING AREA (L x W x H) mm KO - 1 4,000 x 4,000 x 3,000 KO - 2 6,000 x 3,000 x 3,000 KO - 3 6,000 x 5,000 x 5,000 Ljdpfexr Am Uex Al Isab KO - 4 10,000 x 5,000 x 5,000 KO - 5 12,000 x 5,000 x 4,000 KO - 6 15,000 x 5,000 x 5,000 KO - SPECIAL 27,000 x 18,000 x 9,000

Leto izdelave: 2025, stanje: novo, ASK - 0 Hanger Type Shot Blasting Machine This machine is used for polishing of sheet and metal parts after pressing and heat treatment, cleaning and roughening of castings, preparation prior to painting and rubber coating, transferring forged parts onto trolleys, and refurbishment of used parts. (Workpiece Capacity x Diameter): Ø: 800 H: 700 Equipped with 2 turbines, each Ø 325 mm, 6-bladed. The blasting cabin is manufactured from ST-37 grade steel sheet, with the high-wear zones reinforced using Brinell or manganese wear plates. The inside of the cabinet is lined with rubber sheets to protect against abrasion during the blasting process; these are mounted to the cabinet with clamping strips. (Fully manganese armored internal lining is available as an option.) The wear plates are of a bolted (screw-in) design, allowing easy replacement by authorized personnel when necessary due to wear. The machine cabin doors, offered in both pneumatic and manual versions, are double-winged design for convenient access. To ensure operator safety, the doors feature an interlock system to prevent them from being opened during the shot blasting cycle. Additionally, a sensor or switch is integrated into the door mechanism, which halts the blasting operation if the door is open. The system is fitted with a rail conveyor, suspension gear mechanism, and (optionally) a crane, enabling easy transfer and handling of workpieces within the machine cabin. Ljdpfjvkf Agex Al Ieab A fully automated electrical panel is included, featuring Siemens or Schneider components. Machine operation is controlled via a 10” PLC touchscreen display.

Leto izdelave: 2025, stanje: novo, Drum-type Shot Blasting Machine; Consists of a Cabin, Turbine System, Recycling System, Filtration System, Control Panel, Platform, Hydraulic Loading-Unloading Unit, and Vibrating Sieve. Three rubber belts wound on drums rotate the barrel-shaped virtual chamber; during this process, the turbine propels steel shot onto the parts, achieving the blasting effect. The blasting cabin is manufactured from ST-37 steel plate; areas directly targeted by the turbines in the hot spot are lined with wear-resistant manganese steel, while other sections are reinforced with Hardox plate. (Full manganese steel lining is optional.) The wear-resistant plates are mounted with bolts to facilitate future replacement due to wear; they can be easily replaced by your authorized personnel. The bolted design of wear plates allows for convenient replacement by your company’s authorized staff when replacement is required due to abrasion. Lajdjvliucopfx Al Iob The dimensions of the TK-6 PREMIUM machine are as follows: Drum Diameter Ø: 1000 mm, Length between Discs L: 1200 mm, with a loading capacity of 800 kg. Turbine specifications: 2 x F300 type Ø 320 mm with 7.5 kW motor. Equipped with a Rubber Belt Conveyor.

Leto izdelave: 2025, stanje: novo, A sandblasting cabinet is a closed system designed for cleaning, roughening, or preparing the surfaces of small and medium-sized components prior to painting, coating, or further processing. Unlike large sandblasting chambers, the cabinet is compact and self-contained, allowing the operator to work in a controlled, dust-free, and safe environment. ⚙️ Main Features of the Sandblasting Cabinet Closed Working Area: The cabinet is fully sealed. The operator handles the process through rubber sleeves (gloves) and monitors the interior via a transparent protective window. Nozzle System (Sandblasting): Compressed air mixes with the abrasive media (e.g. sand, corundum, steel shot, glass beads) and impacts the surface of the workpiece at high speed. Internal Lighting: The cabinet interior is equipped with powerful LED lighting, ensuring excellent visibility during operation. Dust Extraction / Filtration System: Removes dust generated during sandblasting, cleans the air, and protects the operator's health. Abrasive Recovery System: Used abrasive falls into a hopper, is sieved, and is reused, making the process economical and environmentally friendly. Ergonomic Design: Features convenient working height, a large observation window, and foot pedal operation to facilitate work. 🧩 Types of Sandblasting Cabinets Lasdpfxoxr Awae Al Isb Pressure Cabinets: Discharge abrasive at high pressure — ideal for removing heavy rust, paint, and scale. Suction Cabinets (Venturi): Draw and accelerate the abrasive using air — suitable for delicate and precision work. Automatic Cabinets with Rotary Table: Equipped with rotating tables, ensuring uniform and automatic surface treatment.

Leto izdelave: 2025, stanje: novo, The Belt Conveyor Shot Blasting Machine is a modern device designed for cleaning, derusting, and surface preparation of metal components. With a continuous rubber or steel belt conveyor, workpieces are automatically transported through the blasting chamber, where high-performance turbines direct abrasive media onto the surfaces. This process removes rust, scale, sand, and paint residues, leaving a clean and uniform surface ready for painting, coating, or further processing. The machine is ideally suited for foundries, the automotive industry, forges, and metalworking plants, where it efficiently cleans small and medium-sized parts such as castings, forgings, or hardened components. The belt conveyor ensures gentle handling of parts and even blasting on all sides, while the automatic abrasive recovery and air filtration system guarantees cost-effective and environmentally friendly operation. Thanks to its energy-efficient design, low operating costs, and high performance, the belt conveyor shot blasting machine is an excellent solution for production lines requiring consistent quality and short processing times. Laodpfoxv Atijx Al Isb

Leto izdelave: 2025, stanje: novo, Rulo Konveyörlü Kumlama Makinesi Sac, Profil ve Mamul Metal Ürün Kumlama Makinesi: Kabin, Türbin Sistemi, Konveyör Sistemi, Geri Dönüşüm Sistemi, Filtrasyon Sistemi, Kumanda Panosu ve Platformdan oluşur. Rulo Konveyörlü Kumlama Makineleri; Sac Kumlama Makineleri ve Profil Kumlama Makinelerinden oluşur. Malzeme, özel olarak imal edilmiş rulo konveyör üzerinde kabine iletilir. Yüzeyi temizlenen malzeme, kabinden çıkışta bir sonraki işleme (boyama, kaplama vb.) hazır hale gelir. Sac, NPI, NPU, Profil kumlama işlemlerinde kullanılır. Boyama öncesi pas alma, pürüzlendirme ve temizleme için idealdir. Kabin, ST-37 sacdan imal edilmiş olup, kumlama bölgesi mangan aşınma plakaları ile desteklenmiştir. Legging bölgelerine yakın kısımlara Hardox saclar ilave edilmiştir. Aşınma plakası kaplaması, ileriki aşınmaya bağlı değişimlerde kolaylık sağlamak amacıyla vidalı tiptedir. Lajdevnrr Aopfx Al Iob Makine üzerindeki türbinlerin yan aşınma plakası, üst aşınma plakası, ön ve arka aşınma plakası, bıçakları, impelleri, kontrol kafesi ve çelik bilya besleme dirseği Ni-Hard dökme demir kimyasal bileşiminden üretilmiştir. KOD G x Y (mm) TÜRBİN SK - 1 1.000 x 500 4 x Ø 300 SK - 2 1.500 x 500 6 x Ø 300 SK - 3 1.500 x 1.000 6 x Ø 400 SK - 4 2.000 x 500 8 x Ø 400 SK - 5 2.000 x 1.000 8 x Ø 400 SK - 6 2.000 x 1.500 10 x Ø 400 SK - 7 2.500 x 1.000 12 x Ø 400 SK - 8 3.000 x 1.000 16 x Ø 400 SK - 9 3.000 x 1.500 16 x Ø 400 SK - 10 4.000 x 2.000 22 x Ø 400

Leto izdelave: 2025, stanje: novo, A pipe shot blasting machine is a specialized device designed for cleaning, roughening, or preparing the internal and external surfaces of pipes and cylindrical components. It is used for removing rust, mill scale, burrs, old paint coatings, and other contaminants by means of a high-velocity abrasive stream (e.g., steel shot, grit, or sand). ⚙️ Operating Principle Loading: Pipes are placed on a roller or belt conveyor system, which enables smooth movement. Transport: The pipes are automatically fed into the blasting chamber via a roller conveyor or a through-feed line. Shot Blasting Process: Inside the chamber, high-speed turbines propel steel shot or other abrasive material onto the surface of the pipe. Lodpfx Alexuhrbj Ijab During the process, the pipe rotates and advances, ensuring uniform cleaning of the entire surface. Abrasive Cleaning and Recovery: The used abrasive is automatically collected, filtered, and recycled for reuse. Dust and contaminants are removed through an industrial extraction and filtration system.

Leto izdelave: 2025, stanje: novo, Rotacijski stroj za peskanje z mizo omogočajo učinkovito in enakomerno čiščenje površin ulitkov, odkovkov in kovinskih komponent. Z uporabo vrtljive mize in visokozmogljivih peskalnih koles odstranijo rjo, oksidne plasti, barvo ter nečistoče za pripravo delov na premaz ali nadaljnjo obdelavo. Idealni so za majhne in srednje serijske proizvodnje, ti stroji zagotavljajo stalno kakovost, zmanjšujejo ročno delo in nudijo zanesljivo delovanje v industrijskem okolju. Lasdpexzzi Tefx Al Ijb

Leto izdelave: 2025, stanje: novo, The Pass-Through Hanging Shot Blaster is an automatic surface cleaning system primarily used for removing rust, scale, paint, or other contaminants from metal surfaces. In this system, components are suspended on an overhead conveyor and continuously transported through the blasting chamber, ensuring high efficiency and consistent processing quality. ⚙️ Operating Principle Loading: Components are hung on rotating hooks or hangers attached to the overhead conveyor. Lajdpfxjxuhf Ie Al Iob Transport: The conveyor automatically moves the components into the shot blasting chamber. Blasting Process: Inside the chamber, high-speed turbines propel steel shot or other abrasive media onto the surface of the components. This effectively removes rust, scale, burrs, old paint coatings, and other contaminants. Hook Rotation: The hooks typically rotate to ensure even cleaning of the entire surface of the component. Unloading and Abrasive Recovery: After blasting, the components exit the chamber. The used abrasive is recovered and recycled, while dust is extracted by a filtration system. CODE W: H: Turbine ASK-KON - 1 1,000 x 1,000 4 x F400 ASK-KON - 2 1,000 x 1,500 6 x F400 ASK-KON - 3 1,000 x 2,000 8 x F400 ASK-KON - 4 1,500 x 3,000 12 x F400 ASK-KON - 5 1,500 x 4,000 12 x F500

Leto izdelave: 2025, stanje: novo, A gas cylinder shot blasting machine is an industrial device designed for cleaning, removing rust, old paint, and contaminants from the surface of gas cylinders (e.g. LPG, technical, industrial) prior to repainting, refurbishment, or technical inspection. ⚙️ How does it work? Lajdpfx Aljxun T Ss Isb The machine uses steel shot, which is propelled at high speed onto the cylinder surface inside an enclosed blast chamber. This process: - Removes rust, paint, and contaminants, - Produces a uniform, roughened surface to improve paint adhesion, - Enables thorough surface inspection (cracks, dents, corrosion), - Prepares cylinders for safe reuse. 🧩 Main components Component Function Blast chamber Location where the cleaning takes place Blast wheels Propel steel shot at high velocity onto the surface Transport system Rotates or moves the cylinders (conveyor, turntable, hoist) Abrasive recovery system Collects and recycles abrasive material Dust collector (air filter) Removes dust and airborne contaminants Control panel Process automation and control

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Technical Data Fully automated wet blasting system Workpieces to be processed: Engine components, other parts Rotary table size: Ø 1300 mm Rotary table speed: 1 – 30 rpm Rotary table load capacity: 500 kg Max. workpiece size: Ø 1500 mm, height 1000 mm Number of blasting nozzles: 1 – 4 Blasting pressure: 0.5 – 6 bar (± 0.01) Laodpjwi Hcwsfx Al Iob Cabin lighting Abrasive used: Al2O3 500 mesh as lapping abrasive Abrasive delivery system: Feed pumps Maximum flow rate: 120 l/min at up to 35% concentration Aluminium oxide

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 020616/P, skupna širina: 70 mm, skupna dolžina: 90 mm, skupna višina: 180 mm, pritisk: 8 letvica, obratovalni tlak: 8 letvica, vhodna napetost: 230 V, Oprema: kabina, I am selling a METAL FINISHING water blasting machine - Type – waterblast 800 - Model – WBL 001 - Ser. No. – 020616/P Lasdpfx Aljy Rz Abe Ieb - Year 2008 The machine has been used very little and has been regularly maintained. It is very practical and very efficient. Its advantage is that with high pressure of water, which also contains abrasive granules, it hits the metal and creates a great effect. The advantage of a water blasting machine is that the water, together with the granules, constantly circulates, flows into the tank and this means that there is no dust, that abrasive particles do not enter the surroundings, that the surroundings are always clean. It is connected to the electrical network and ready to start.

Stanje: dober (rabljeno), Peskalni stroj z visečo progo 150kg TOSCA TS-150 Tip stroja: Viseča proga Max. premer odbelovanca: 600 mm Max. višina obdelovanca: 1000 mm Max. teža posameznega obdelovanca: 150 kg Odprtina v ohišju stroja: 800x1200 mm Število instaliranih turbin: 2 Tip turbine: 320 Premer rotorja turbine: 320 mm Moč turbine: 4 kW Max. pretok turbine: 56 kg/min Tip proge: Y proga Tip čistilca: zračni Montaža stroja: talna Ohišje: Mn + guma Filtrirna naprava: 2.000 m3/h Lajdpfx Aewm Ar Nol Ieb Teža stroja: kg Širina stroja: mm Višina stroja: mm Dolžina stroja: mm Stroj bo v celoti obnovljen. Vsi obrabljeni deli bodo zamenjani z novimi. Stroj bo prebarvan v novo barvo.

Stanje: dober (rabljeno), Kavelver typ tryksandblæsemaskine 1800x2500 med motoriseret krog og kran SIRSI Type: Kavelver type Maks. emnediameter: 1800 mm Maks. emnehøjde: 2500 mm Maks. vægt af emne: 3.000 kg Maskinens løftekapacitet: 1x 3.000 kg Antal turbiner: 3 Turbinetype: 360 Turbinens hjuldiameter: 360 mm Turbineeffekt: 3x 7,5 kW Lsdpfxowrxczo Al Ijab Maks. turbineflow: Transportrails type: I Rensertype: luftvasker Fundament: JA Kabinebeskyttelse: Mn + gummi Filter: JA Maskinens samlede bredde: Maskinens samlede højde: Maskinens samlede længde:

Stanje: dober (rabljeno), Kljukasta stroj za peskanje, 250 kg TOSCA TS-250 Tip: Kljukasta Največji premer obdelovanca: 1000 mm Največja višina obdelovanca: 1500 mm Največja teža obdelovanca: 500 kg Širina odprtine stroja: mm Lodpfxovpgq Ns Al Isab Število turbin: 2 Tip turbine: 360 Premer kolesa turbine: 360 mm Moč turbine: 7,5 kW Maksimalni pretok turbine: 105 kg/min Tip transportne tirnice: Y Tip čistilca: zračno čiščenje Temelj: ne potrebuje Zaščita ohišja: Mn + guma Potreben pretok zraka: 3.000 m³/h Največja instalirana moč: pribl. 19 kW Skupna teža stroja: 0 kg Skupna širina stroja: mm Skupna višina stroja: mm Skupna dolžina stroja: mm Stroj je v postopku celovite obnove. Vsi poškodovani deli bodo zamenjani z novimi, turbine popolnoma obnovljene. Novo barvanje v odtenku RAL 7037/2000. Stroj bo dostavljen v stanju PRIMERLJIVEM Z NOVIM! !!! STANJE KOT NOVO !!!

Stanje: dober (rabljeno), Leto izdelave: 2018, Kaveljska bobnarska čistilna naprava 500 kg Lodpfswm Attex Al Ijab TECNOBLAST GHIBLI 500 S/2 - 10x15 Tip: Kaveljski tip Največji premer obdelovanca: 1000 mm Največja višina obdelovanca: 1500 mm Največja teža obdelovanca: 500 kg Širina odprtine stroja: mm Število turbin: 2 Tip turbine: 360 Premer kolesa turbine: 360 mm Moč turbine: 7,5 kW Največji pretok turbine: 105 kg/min Tip transportne tirnice: Y Tip čistilca: zračno pranje (airwash) Temelj: ne potrebuje Zaščita ohišja: Mn + guma Potrebni pretok zraka: 3.000 m³/h Največja vgrajena moč: ca. 19 kW Skupna masa stroja: 0 kg Skupna širina stroja: mm Skupna višina stroja: mm Skupna dolžina stroja: mm !!! LETNIK PROIZVODNJE 2018 !!! Stroj je v zelo dobrem stanju. Pripravljen za obratovanje !!! ZELO DOBRO !!!

Stanje: dober (rabljeno), Leto izdelave: 2008, Kaveljska peskalna naprava 2700x3500 z motoriziranim kavljem in žerjavom Proizvajalec: CARLO BANFI Tip: Kaveljski tip Največji premer obdelovanca: 2700 mm Največja višina obdelovanca: 3500 mm Največja teža obdelovanca: 12.000 kg Ledewq Ru Hepfx Al Ioab Ročna peskalna komora: DA Komora za odpihavanje: DA Širina odprtine stroja: Število turbin: 16 Tip turbine: 360 Premer kolesa turbine: 360 mm Moč turbine: 16 x 11 kW Največji pretok turbine: Tip transportne tirnice: I Sistem čiščenja: zračna prha Fundacija: DA Zaščita ohišja: mangan + guma Filter: DA Skupna širina stroja: Skupna višina stroja: Skupna dolžina stroja:

Stanje: zelo dobro (rabljeno), OMSG CWB 850 4/FAC Typ: Pásový průběžný tryskač s drátěným pásem Max. šířka obrobku: 850 mm Max. výška obrobku: 450 mm Lsdpfx Ajwm Dbxjl Ioab Počet turbín: 4 Průměr turbínového kola: 350 mm Výkon turbíny: 7,5 kW Max. průtok abraziva turbínou: 105 kg/min x 4 Převodová rychlost: 0,5 – 5 m/min Typ čističe: Airwash Filtrační jednotka: součástí dodávky Základové rámy: ne Celková šířka stroje: cca 3.000 mm Celková výška stroje: cca 5.000 mm Celková délka stroje: cca 7.000 mm Max. instalovaný výkon: cca 70 kW

Stanje: novo, Blasting Cabin Brand: STK Model: PK-690L Condition: New machine Accessories: - Interior lighting - Extraction system with filtration - Pressure regulator with gauge - Pair of gloves - Blast gun with nozzle - Foot switch - Operating manual Lasdps R Thtsfx Al Ijb

Leto izdelave: 2013, stanje: kot nova (razstavni stroj), Tehnični podatki: - Peskanje + linija za elektrostatno lakiranje z uporabo tekočih barv - Proizvajalec: IKL AUSTRIA - Dimenzije kovinskih delov: maks. 400 x 2000 mm - Dva robota - Kapaciteta: 400 steklenic na dan - Linija vključuje: Laodpohtlw Refx Al Isb 1. Peskalno linijo 2. Linijo za elektrostatno lakiranje

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: N/A, Naprava za peskanje tipa GH-4 je posebej priporočljiva za peskanje in površinsko obdelavo litih, kovinsko kovanih in stiskanih delov v razsutem stanju. Dimenzije peskalne komore: Širina gumijastega traku: 1.300 mm Premer koluta traku: 1.150 mm Največja teža polnila obdelovancev: 800 kg Polnjenje peskalnega sredstva: 800 kg Peskalne glave: Število peskalnih glav: 2 kosa Moč pogonskega elektromotorja: 11 kW Laedpfxjy Nbm Do Al Ijb Zahteve po energiji: Električna moč: 27,5 kW Tlak komprimiranega zraka: 6 bar Količina: 6 m3/h Zmogljivost ventilatorja za odsesavanje prahu: 5.500 m3/h Naprava je v celoti obnovljena, v kot-novi kondiciji naprodaj. Neposredno od proizvajalca! Po potrebi nudimo pomoč pri transportu in montaži.

Leto izdelave: 2020, stanje: novo, The automatic car wash is a solution that allows you to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash system is equipped with a set of spray pumps. It is designed to ensure that after the migration of the process fluid to subsequent steps, as little liquid as possible remains, thereby saving money and improving washing quality. This is particularly important, because apparent savings in systems that do not use these solutions can lead to much higher future costs related to chemicals and waste disposal, which will inevitably be higher. Attention should also be paid to potential issues in maintaining the required bath parameters. Research and development have enabled us to create a car wash system with an optional detail-drying function, using hot air blown by a series of fans at the end of the washing cycle. The car wash is equipped with an advanced system for creating custom macro programs, each consisting of up to 10 steps per tank, depending on the number of tanks. Processes can be repeated, reordered, etc. Each tank has its own icon and name, allowing for intuitive operator interaction. Optionally, tanks can be fitted with replenishment systems that can refill between processes or at the end of a cycle, for example. Ljdpfx Aeflmdbel Ioab • Control panel mounted on a swivel arm for improved accessibility • PLC microprocessor control • 7” touch panel operation • Significantly higher number of nozzles compared to other solutions • (Option) Capability of drying details after washing process • Possibility to create custom advanced programs • Advanced damper system made from acid-resistant sheet metal, doubly protected by limit switches • Monitoring system for secure and tight opening/closing of the main flap • To minimize liquid mixing: dedicated pipework, nozzles, and tanks for each process • Intelligent control – no possibility of liquid mixing during power outage/sudden shutdown • Fully automatic operation Prices are listed in the catalogue.

Leto izdelave: 2020, stanje: novo, The automatic car wash is a solution that allows you to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash system is equipped with a set of spray pumps. It is designed to ensure that after the migration of the process fluid to subsequent steps, as little liquid as possible remains, thereby saving money and improving washing quality. This is particularly important, because apparent savings in systems that do not use these solutions can lead to much higher future costs related to chemicals and waste disposal, which will inevitably be higher. Attention should also be paid to potential issues in maintaining the required bath parameters. Research and development have enabled us to create a car wash system with an optional detail-drying function, using hot air blown by a series of fans at the end of the washing cycle. The car wash is equipped with an advanced system for creating custom macro programs, each consisting of up to 10 steps per tank, depending on the number of tanks. Processes can be repeated, reordered, etc. Each tank has its own icon and name, allowing for intuitive operator interaction. Ljdpfx Ajfy T Szol Ioab Optionally, tanks can be fitted with replenishment systems that can refill between processes or at the end of a cycle, for example. • Control panel mounted on a swivel arm for improved accessibility • PLC microprocessor control • 7” touch panel operation • Significantly higher number of nozzles compared to other solutions • (Option) Capability of drying details after washing process • Possibility to create custom advanced programs • Advanced damper system made from acid-resistant sheet metal, doubly protected by limit switches • Monitoring system for secure and tight opening/closing of the main flap • To minimize liquid mixing: dedicated pipework, nozzles, and tanks for each process • Intelligent control – no possibility of liquid mixing during power outage/sudden shutdown • Fully automatic operation Prices are listed in the catalogue.

Stanje: novo, Leto izdelave: 2025, INJECTOR Sandblasting Cabinets Laodpowf Dwwefx Al Iob The benefits and applications of injector sandblasting cabinets Injector sandblasting cabinets utilize an air-powered Venturi system to create a vacuum that draws abrasive blasting media into the airflow. The abrasive media is then propelled at high speed from the blasting nozzle, impacting the surface to be cleaned or prepared. Injector sandblasting is generally used for lighter-duty applications. Our SAPI injector sandblasting cabinets – including the Elch, Widder, and Büffel models – use an air-operated suction system that draws the abrasive media up to the nozzle, where it mixes with the airflow and is then blasted onto the workpiece. These cabinets are ideal for lighter applications and provide efficient, cost-effective solutions. ----- The Widder 70 / 100 injector sandblasting cabinet is a robust and reliable solution for demanding surface preparation requirements. Featuring a spacious working area, a right-hand side door, and an efficient dust extraction system, this cabinet is designed for use with various types of blasting media and can accommodate small to medium-sized components. Ideal for industrial applications, such as in metal fabrication shops and workshops. ----- The Elch 100 / 130 injector sandblasting cabinet from SAPI is a compact and versatile solution for medium to large parts. Equipped with a large viewing window, two side doors, and an efficient filtration system, this cabinet allows easy monitoring of the blasting process and ensures a clean, safe working environment. The Elch is suitable for use with a wide range of abrasive media. Its user-friendly design and efficient blasting process make it the ideal choice for lighter applications in industries such as automotive, aerospace, and manufacturing. ----- The Büffel 140 / 180 injector sandblasting cabinet is a heavy-duty blasting machine engineered for demanding applications. It features an air-powered Venturi system that draws media into the airflow and ejects it at high speed from the blasting nozzle. The Büffel cabinet is also available with an integrated filtration system, which helps reduce dust and improve air quality during the blasting process. Heavy components can be loaded easily via the front flap using a forklift or crane. With its robust construction and efficient blasting performance, the Büffel 140/180 injector sandblasting cabinet is an ideal choice for industrial applications requiring high throughput and minimal downtime.

Leto izdelave: 1991, obratovalne ure: 19.888 h, stanje: rabljeno, - Leto izdelave: 1991 - Dokumentacija na voljo: Ne - CE certifikat prisoten: Ne - Serijska številka: 1844 - Delovne ure: 19888 Finančne informacije DDV: Navedenaa cena ne vključuje DDV DDV/obdavčitev razlike: DDV je odbitna za podjetja Dostava in odkup možna kadarkoli za vso industrijsko opremo Ljdewydviopfx Al Ieab Lukas van Rossum