Blitz Bsd 30-110 nakup rabljenega (29.000)

Stanje: dober (rabljeno), Compressor Blitz BSD 30-110 Ncsdpfxevzxg He Al Ner Single stage 2770 rpm 15800 l/min 10 bar

Stanje: rabljeno, Leto izdelave: 1996, Moč 30 kW Sesalna zmogljivost 4.200 l/min Ncjdpfx Asxu Ntajl Njr Število vrtljajev 5.092 vrt/min Nadpritisk 10 bar Dimenzije stroja D x Š x V 1,72 x 0,90 x 1,60 m - enostopenjski -

Stanje: dober (rabljeno), Blitz Compressor BSD 30-75 Overpressure: 10 bar Ncedpfx Aevzxklsl Njr Speed: 2660 rpm Volume flow rate: 11.3 m³/min

Stanje: rabljeno, prevoženi kilometri: 127.000 km, moč: 81 kW (110,13 KM), prva registracija: 09/2017, vrsta goriva: dizel, skupna masa: 3.000 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, Leto izdelave: 2017, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, Citroen Jumper 2.0 Diesel – EURO 6 German vehicle from first owner. Tow hitch (AHK) Visual defects Special equipment: - Flooring in cargo area - Reinforced alternator - Half-height interior paneling in cargo/passenger compartment Additional equipment: - Driver airbag - Exterior mirrors with wide-angle section - Integrated indicators in exterior mirrors, painted - Brake assist - Rear wing doors (opening angle 180 degrees) Ncodpfx Aley E Eqxs Njr - Body/Construction: Standard box body - Padded headrests - Fuel tank: 90 liters - Partition wall for cargo area - Height-adjustable steering column (steering wheel) - Engine: 2.0 liter – 81 kW Blue-HDI FAP catalytic converter - Wheelbase: 3450 mm - Spare wheel with matching tires - Low-emission according to Euro 6 standard - Sliding door on right side of cargo/passenger compartment - SCR system (AdBlue technology) - Side protection strips - Seat material/upholstery: fabric - Cabin seats: passenger double bench seat - Cabin seats: driver’s seat with lumbar support - Permitted gross vehicle weight: 3.00 t * Sales advisor info * + * APPOINTMENT REQUIRED FOR TEST DRIVE OR VIEWING * + * Trade-in and financing available * Input errors excepted. * Please check equipments on site + subject to input errors + interim sale reserved

Stanje: dober (rabljeno), Težko tovorni transportni valji, strojni valji, transportni vozički, težko tovorni vozički, tankovski valji, krmilni valji za transport strojev -Strojni transportni valji: 4 kos tankovskih valjev -Nosilnost: 30 t (na kos 7,5 t) -Višina podlage: 110 mm -Krožnik: 3x Ø 140 mm / 1x širina 135 mm Njdowx Hciopfx Al Nocr -Dostava/cena: komplet -Mere transportne škatle: 1005/200/H165 mm -Teža: 57 kg

Stanje: rabljeno, Leto izdelave: 2010, Overview This bottle washing machine ARCADE GEL 6 was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and is being replaced due to an increase in production capacity. Technical Details Nominal capacity: 33,000 bottles/hour Adjustable range: 13,200 – 36,300 bottles/hour Chain pitch: 169 mm Cell pitch: 110 mm Bottle cells per row: 30 pcs Total bottle cells: 7,860 pcs Bottle cells, loaded: 7,680 pcs Consumption Compressed air: 1 m³ Steam (operation): 489 kg/h Steam (heating up): 4,430 kg/h Electrical power: 48.4 kW Water: 7.35 m³/h Tank volumes Pre-soak: 2,263 l Caustic pre-rinse: 7,240 l Caustic tank 1: 31,755 l Caustic tank 2: 350 l Hot water tank 1: 350 l Hot water tank 2: 350 l Ncjdpet Ul Exofx Al Njr Cold water tank: 350 l

Stanje: rabljeno, Leto izdelave: 1999, številka stroja/vozila: 26579, Funkcionalnost: nepreverjeno, stiskalna sila: 110 t, delovna širina: 3.050 mm, upogibna sila (maks.): 110 t, delovna dolžina: 3.050 mm, vrsta upravljanja: Krmiljeno s PLC krmilnikom, Used press brake 110 tons 3 meters 6 axes Technical specifications Voltage: 400 V Model: PPEB 110/30 Press force: 1100 kN Working length: 3050 mm Distance between uprights: 2600 mm Stroke: 200 mm Table/ram gap: 400 mm Throat depth: 400 mm Approach speed: 130 mm/s Working speed: 12.4 mm/s Return speed: 115 mm/s Motor power: 15 kW Oil capacity: 250 l Ncsdpfx Alsw Afccj Nor Machine weight: 9500 kg Control: CADMAN CNC Table width: 150 mm Noise level: 80 dBA Pump flow rate: 38 l/min Pump type: Voith IPV 4-25 High precision and high flexibility. The PPEB press brake is a robust and highly technological machine. PPEB gives you the freedom to configure a press brake according to your production needs. Automatic crowning The crowning system compensates for machine deflection to ensure precise and repeatable bending. Our wedge system is custom made for each machine, providing crowning along the entire table length. Robust frame A one-piece welded frame ensures the machine’s precision.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 3 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FI-30-MAX-OF, dolžina gredi: 110 mm, vhodna napetost: 230 V, vrsta vhodnega toka: Enosmerni tok, laserska moč: 30 W, vrsta hlajenja: zrak, delovno območje: 110 mm, skupna masa: 46 kg, trajanje garancije: 36 meseci, vhodna frekvenca: 100 Hz, Immediately available! Demonstration unit! Buy now and benefit! Take advantage of this opportunity and secure the 50-watt demonstration unit—used for a maximum of 3 hours, in like-new condition! For more information or a personalized quote, we are at your service. Contact us today to learn more about the benefits of this outstanding product. We offer a 30-watt fiber laser with German user software and operating manual. This machine is very easy to use without any programming knowledge and is ready for immediate operation. ✅ Only up to 3 hours of use – excellent condition! ✅ 3 years warranty and support included! Our services: - Personal delivery and installation - On-site setup and instruction or via remote connection - Ongoing support for questions or issues - Service and spare parts supplied directly from Germany Technical details: - Laser power: 30 watts - Wavelength: 1064 nm - Marking area size: 200x200 mm (options: 50, 70, 110, 150, 250, 300 mm head) - Repetition accuracy: ± 0.003 mm - Engraving speed: ≤ 7000 mm/s - Marking software: EZCAD in German/English - Pilot laser: easy preview - Laser class: 4 Nsdpfx Aewchywjl Necr - Operating temperature range: 14-30°C - Focusing: manual - Max. part height: approx. 350 mm - Connection: 230V - Cooling: air-cooled - Weight: approx. 50 kg - Operating costs: low - Service life: over 100,000 maintenance-free operating hours - Features: grid drilling for fixtures - Wide range of materials: suitable for marking various materials Included: - 200x200 mm head, other sizes available - CE declaration of conformity - 3 years warranty and support - German language software - Training for machine and software - Invoice Scope of delivery: - USB cable - Power cable - Stops - USB stick with parameters - Operating manual in German - Monitor holder - Foot pedal - Safety goggles Applications: Ideally suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets, and image engraving. This laser is perfect for engraving and annealing metals as well as marking or decorating plastics and coated materials. Software: - EZCad 2.14.0 in German - Compatible file types: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: Service is provided in-house, with the largest spare parts inventory available directly from Germany to ensure fast and efficient support. Shipping and installation: With shipping, we connect the machine via remote link, set it up, and provide a brief introduction. Alternatively, we will deliver personally, install, set up, and instruct you. Pricing is determined based on postal code. Consultation: For comprehensive advice, please visit our website or call us directly. We are happy to answer any questions you may have.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Engel Victory 330/110 Tech / Production line with Engel ER-HLI 41 robot and conveyor belt / Machine in very good technical condition Year of manufacture: 2004 Injection Unit: Screw diameter: 40 mm Shot weight: 190 g Injection pressure: 1670 bar Ncodpoy Dqk Ijfx Al Nsr Dose volume: 201 ccm Clamping Unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Platen size: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Injection unit hardened - bimetallic Machine has been serviced by authorized Engel service Machine with original safety enclosure for robot and conveyor Dimensions: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pump/motor: 18.5 kW Heating power: 9.2 kW Total power: 27.7 kW All offered machines are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: novo, Leto izdelave: 2021, Transnorm Belt Curve Conveyor, right-hand, 30°-1270-1100-IR900 - NEW RA2302 Nedpot D R R Ejfx Al Njcr Technical Specifications: Frame width (NB): 1270 mm Frame width with bearing cover: 1390 mm Frame width with bearing cover and gearbox guard: 1480 mm Belt width (GuB): 1100 mm Overall height (BH): 250 mm Height with underslung motor: 300 mm Motor height (MH): 550 mm Inside radius (IR): 1200 mm Conveying angle: 30° degrees Average conveying speed (v m/s): 1.4 m/s Drive: SEW motor with frequency inverter Electrical data: 50Hz V380-500, kW 1.5 / S1 Belt: KT 96 new Year of manufacture: 2021 Side guide height: 194 mm Optionally available: Supports Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics

Stanje: novo, Leto izdelave: 2021, Transnorm Belt Curve Conveyor Left 30°-1270-1100-IR900 – NEW RA2303 Technical Data: Frame width (NB): 1270 mm Frame width with bearing cover: 1390 mm Frame width with bearing lid and gearbox cover: 1480 mm Belt width (GuB): 1100 mm Overall height (BH): 250 mm Nsdot D R R Sepfx Al Nscr Height of bottom-mounted motor: 300 mm Motor height (MH): 550 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Average conveying speed (v m/s): 1.0 m/s Drive: SEW motor with frequency inverter Electrical data: 50Hz V380-500, kW 1.5 / S1 Belt: KT 96 new Year of manufacture: 2021 Side guide height: 194 mm Optionally available: Supports Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg. For customized, professional advice, simply get in touch with us. Contact us easily by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, The Dr. Sonntag GmbH & Co. KG team – Your specialist and contact for intralogistics.

Stanje: rabljeno, prevoženi kilometri: 55.124 km, moč: 133 kW (180,83 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, prva registracija: 08/1974, barva: rumena, število sedežev: 46, Splošno: * Motor: Mercedes-Benz * Menjalnik: ročni menjalnik * Skupno število sedežev: 46 * Sedeži: 44+1+1 visoki/fiksni Varnost: * Meglenke Potniški prostor: * Stacionarno ogrevanje * Mize * Poličke za prtljago * Mikrofoni za voznika Zunanjost: * Število dvojnih širokih vrat: 2 * Dvižno-spustna naprava * Servovolan * Tahograf s ploščo * Strešna okna Avdio, komunikacija, elektronika: * Radio Ostalo: * Dvojna montaža gum * Dimenzije vozila: Dolžina 9,5 m, širina 2,5 m, višina 3,1 m * Ohranjenost gum: sprednja os cca 60 %, zadnja os cca 60 % Naša interna številka vozila: 11940 Ncsdex Al R Repfx Al Nsr Pridržujemo si pravico do napak. Slike in besedilo se lahko razlikujejo od vozila. V stalni ponudbi več kot 300 vozil.

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7967 TECHNICAL DATA - Max. working width: 1100 mm - Max. working height: 170 mm 2 units: 1) Serrated metal roller for calibration 2) Serrated rubber roller + pressure shoe + metal roller – Top side: - Non-slip rubber feed roller - Working unit (includes two units driven by one 15 kW motor) - Non-slip rubber feed roller - Outfeed rubber roller - Belt air blower – Bottom side: - 2 metal non-slip rollers - Feed belt - 2 non-slip rubber rollers - Pneumatic belt oscillation - Sanding thickness potentiometer - Electric table adjustment + manual fine adjustment - Pneumatic brake - 2 feed speeds - Operating pressure: 6–8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (LxWxH): 1830 x 1670 x 1950 mm - Weight: 1160 kg ADVANTAGES – Manufactured in Italy – 2 sanding units – Unpainted – Used sander, in perfect condition Ncedoy Ddp Depfx Al Njr Net price: 77,900 PLN Net price: 18,550 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may vary due to currency fluctuations)

Stanje: dober (rabljeno), Several touch probes from Heidenhain are available for sale. Nodpfx Alshlafns Nocr - Manufacturer: Heidenhain - Model: TS110 / TS111 untested = €450 each TS110 / TS111 tested = €750 each TS220 / TS230 = €950 each Please note: Since multiple probes are for sale, please specify the desired model! - Shank: SK50

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-tying (9-fold binding). The baler is in good technical condition and was only used sporadically. PRESS DIMENSIONS -Total length: 9700 mm -Total width: 3700 mm -Transport width: 2300 mm -Height incl. feed hopper: 3640 mm -Total weight approx.: 24t -Floor pressure: approx. 5kg/sqcm -Heaviest machine component weighs approx. 6 tons FEED HOPPER OPENING -Length: 1600 mm -Width: 1200 mm -Inspection door (glass) PRESS CHAMBER -Stroke length of ram: 2600 mm -W x H: 1100 x 770 mm -Volume: 2.2 cbm Ncjdpfx Aey Ayiqel Nsr -The ram runs on heavy-duty rollers and features knives for cutting residual material. -Compacting pressure in the press chamber (channel) is provided by two side cylinders and a simple lever system, allowing for uniform and wide-area force distribution. HYDRAULIC SYSTEM -Electric motor Siemens 4-pole 400V-50Hz 30 kW -Hydraulic pump (Bucher) continuous/peak: 320 / 400 bar -Maximum working pressure: 290 bar -Denison hydraulic valves 24 VDC -Pressure monitoring with proportional valve cycle -Automatic oil temperature monitoring -Automatic oil filter monitoring -Automatic oil level monitoring -Oil volume: 600L -Pressing force max.: 740kN / 74t -Specific pressure: 87 N/sqcm SYSTEM THROUGHPUT -Volume per pressing operation, incl. pre-compaction: 1.76 cbm -Average duration per press cycle: approx. 40+8 sec -Cycle time without material: 22+8 sec -Tying time: 30 sec -Theoretical volume without tying: 1.84 m3/h -Average operating volume: 123 m3/h -Capacity with material density 30 kg/m3: 3-4 t/h BALES -Bale length: 500 - 2000 mm -Bale width: 1100 mm -Bale height: 770 mm

Stanje: rabljeno, Leto izdelave: 2004, vpenjalna sila: 110 kN, delovna prostornina: 2.926 cm³, tlak vbrizgavanja: 1.600 letvica, skupna masa: 5.650 kg, premer polžastega transporterja: 45 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Ncjdpjymqz Rsfx Al Njr Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: rabljeno, Leto izdelave: 2005, vpenjalna sila: 110 kN, delovna prostornina: 2.926 cm³, tlak vbrizgavanja: 1.600 letvica, skupna masa: 5.650 kg, premer polžastega transporterja: 45 mm, Dobavni pogoji: iz lokacije Nodoymqz Dopfx Al Nocr Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: dober (rabljeno), Leto izdelave: 2020, Enosmerni motor, servomotor, motor z zobniškim prenosom, elektromotor, enosmerni motor z zobniškim prenosom Ncsdpfx Aoyxcmqsl Nor -Proizvajalec: Ott, BLDC servomotor z polžastim prenosom -Tip: TBSL043030010-110 -Napetost: 24 V -Hitrost: 300 obr/min -Prijenos: Transtechno i=10 -Gred: Ø 14 x 63 mm -Količina: 1x motor z zobniškim prenosom na voljo -Mere: 215/63/H95 mm -Teža: 2,3 kg.

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), premer vijaka: 120 mm, Ta Husky GL 300PET P100/110 E12O je bila izdelana leta 2002. Ima razmik med vodili 720 × 720 mm, maksimalni hod orodja 700 mm in premer polža 120 mm. Stroj nudi razmerje L/D polža 25,0:1 in vbrizgovalni tlak 1172 bar. Če iščete visokokakovostni brizgalni stroj, razmislite o modelu Husky GL 300PET P100/110 E12O, ki ga ponujamo v prodajo. Kontaktirajte nas za več informacij. • Razmik med vodili: 720 × 720 mm • Največji hod orodja: 700 mm • Zapiralna višina orodja: 450–900 mm • Največji hod hidravličnega izmetalca: 225 mm Ncodpfsx D Rcnjx Al Nor • Hod polža: 400 mm • Polž L/D razmerje: 25:1 • Največje število vrtljajev polža: 60 vrt/min • Hod brizgalnega bata: 340 mm • Premer talilnega cilindra: 110 mm • Premer talilnega kanala: 32 mm

Stanje: skoraj kot novo (rabljeno), 50 running meters Nedcon pallet racking Brand new, see pictures! A top-quality racking system from the renowned manufacturer NEDCON – a subsidiary of Voestalpine AG, headquartered in the Netherlands. Height: 7 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam load capacity per level: 3,050 kg Negotiable price: €10,950,-- net ex stock Offer includes: Nedpsfkgq Sefx Al Necr + 19 pre-assembled frames, depth 110 cm, height 7 m + 144 beams, length 2.7 m, 3,050 kg load/level + 288 clip-on safety pins + 38 concrete anchors Load capacity signage and relevant documents are, of course, included. You will find additional accessories in our accessories catalogue. Frames: blue RAL 5019, bracing galvanized Heights from 2 m up to 7 m available from stock Bay load capacity: 12 tonnes; higher bay loads available upon request Beams: orange RAL 2008 Beam lengths in stock: 1.85 m, 2.7 m, 3.3 m, 3.6 m Goods are in stock. Transport and assembly available on request. Other configurations available on request. Over 2,000 meters in stock. Viewing possible at any time by appointment. Further information available on request. Constantly over 5,000 running meters of pallet racking from various manufacturers in stock. (Subject to changes and errors in technical data, details, and prices as well as prior sale! See our General Terms & Conditions. All prices exclude VAT, ex stock.) Purchase / Sale We are constantly looking to buy and offer various items from different sectors: – Swept-clean company liquidations – Business closures – Quick – flexible – efficient! We also clear out or dispose of properties for insolvency administrators. Write to us with a few keywords, and we will respond promptly. To visit our website, please click on our logo!

Stanje: skoraj kot novo (rabljeno), 40 Linear Meters Pallet Racking Nedcon Brand new, see photos! A top rack system from the major manufacturer NEDCON – a subsidiary of Voestalpine AG, based in the Netherlands. Height: 5.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam load capacity per level: 3,050 kg Asking price: €6,990 net ex stock Offer includes: Ncodpfxefkgpws Al Njr + 15 upright frames, pre-assembled, depth 110 cm, height 5.5 m + 84 beams, length 2.7 m, 3,050 kg load per level + 168 locking pins + 30 concrete floor anchors Load capacity signage and documentation included as standard. Further accessories available in the accessories catalogue. Frames blue RAL 5019, bracing galvanized. Heights from 2 m to 7 m in stock. Bay load: 12 tons, higher bay loads available on request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and installation available on request. Other configurations available on request. More than 2,000 meters available. Viewing possible at any time by arrangement. More information upon request. Always over 5,000 linear meters of pallet racking from various manufacturers in stock. (Subject to modifications, errors in technical data, information, and prices as well as prior sale! See our T&Cs, all prices excl. VAT ex stock) Purchase/Sale: We are always looking for and offering a variety of items from different sectors - broom-clean clearances - business liquidations - Fast – flexible – efficient! We also clear out and/or dispose on behalf of insolvency administrators. Send us some keywords, and we will contact you immediately. To visit our page, please click our logo!

Stanje: skoraj kot novo (rabljeno), 25 linear meters of Nedcon pallet racking Nodpfxsfi U Aij Al Necr New, see photos! A top-quality racking system from the major manufacturer NEDCON – this is a subsidiary of Voestalpine AG with its headquarters in the Netherlands. Height: 3.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Load capacity per beam/per level: 3,050 kg Asking price: €3,290,-- net ex stock Offer includes: + 10 pre-assembled frames, depth 110 cm, height 3.5 m + 36 beams, length 2.7 m, 3,050 kg load capacity per level + 72 locking pins + 20 concrete anchors Load capacity signs and documentation are of course provided. Additional accessories can be found in the accessory catalogue. Frames: blue RAL 5019, bracing galvanized. Heights from 2 m to 7 m available from stock. Bay load: 12 tons, higher bay loads available on request. Beams: orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m available from stock. Goods in stock. Transport and installation on request. Other configurations on request. Over 2,000 meters available. Inspection possible at any time by appointment. Further details on request. Always over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices as well as prior sale! Please refer to our General Terms and Conditions, all prices excl. VAT, ex stock) Purchase / Sales We are constantly looking for, or offering, a wide range of items from various sectors: – broom-clean clearance of business premises – business liquidations – Fast – flexible – efficient! We also clear and/or dispose for insolvency administrators. Just send us a brief message and we will get back to you immediately. To visit our website, please click on our logo!

Stanje: dober (rabljeno), Leto izdelave: 2012,

Stanje: dober (rabljeno), Leto izdelave: 2014, For sale are two identical injection molding machines from Netstal, model SynErgy 2000-230/110. The machines were in production up to the last day. The company from which these machines originated places great importance on maintenance and servicing, which is why the machines are in very good condition. 2K function Rotary table Specification Netstal SynErgy 2000 Clamping force in kN 2000 Drive power in kW 45 Year of manufacture 2014 Operating hours 20,209 Weight 13,300 kg Length 6,901 mm Width 2,075 mm Height 2,240 mm plus 800 mm Flow Box Cylinder size AG1 20 mm Cylinder size AG2 16 mm _____ Specification Flow Box Type LMP 105 Manufacturer Max Petek Nedpfxekwb Dij Al Nscr Serial number S 140743 Year 2014 _____ Additionally available: Robot Krauss–Maffei MH 50 Model 6-axis: Yaskawa Type: DX 100 Operating hours approx. 8,900 Year 2014 The units can be purchased as a complete package or individually. Prices are subject to VAT. Viewing by appointment possible. Contact us—our team is happy to assist. Trade-in or exchange possible! Machinery Trading – Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or to contact us, please visit our website.

Stanje: rabljeno, prevoženi kilometri: 162.095 km, moč: 81 kW (110,13 KM), prva registracija: 10/2018, vrsta goriva: dizel, velikost pnevmatike: 215/70R15C, konfiguracija osi: 4x2, gorivo: dizel, zavore: zaviranje z motorjem, barva: drugo, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo, skupna dolžina: 5.100 mm, skupna širina: 2.050 mm, skupna višina: 2.400 mm, Leto izdelave: 2018, Oprema: ABS, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, spojka prikolice, tempomat, = Druge možnosti in dodatki = - CD-predvajalnik - Rezervni ključ - Omejevalnik hitrosti Ncsdpfx Aoyz Am Ajl Nsr - Kontrola stabilnosti - Standardna klimatska naprava - Vizir - Izmenični tok - Ksenonske luči = Dodatne informacije = Konfiguracija osi Velikost pnevmatik: 215/70R15C Znamka osi: Različni Zavore: Kolutne zavore Vzmetenje: Listnate vzmeti Sprednja os: Krmiljena; Profil pnevmatike levo: 4 mm; Profil pnevmatike desno: 5 mm Zadnja os: Profil pnevmatike levo: 7 mm; Profil pnevmatike desno: 7 mm Teže Lastna teža: 1.920 kg Nosilnost: 1.080 kg Skupna dovoljena masa: 3.000 kg Stanje Poškodbe: brez