Amis Stiskalnica Za Briketiranje nakup rabljenega (84.790)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior, however, both the motor and the hydraulic pump are larger, and the electrical system is more advanced. General features: - Robust construction - Very easy to operate and economical in operation - Simple maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Low oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Wiring diagram - CE marking - Operating manual Technical data: - Motor power: 7.5 kW, connection value 400 V, 50 Hz - Number of pressing cycles per minute: 14 - Capacity: 60 – 100 kg/h (depending on material) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Oil tank volume: approx. 180 litres - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Iodpfxewyc H Te Ab Aoib Weight: approx. 1000 kg Incl. approx. 2 m briquette discharge pipe Used machinery notice: • Subject to technical changes and prior sale. • Prices stated are ex-works, loaded free of charge at location! • The machine has been cleaned and function-tested. • All machines are sold as inspected without any warranty. Buyers are welcome to inspect the machine at our site. • Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Stanje: novo, Leto izdelave: 2025, Performance: 10 - 25 kg/h Briquette size: 30 mm x 30 mm cube Hopper capacity: 0.33 m³ Dimensions: 1300 mm x 740 mm x 1200 mm (L x W x H) Power consumption: 2.2 kW Machine length: 1300 mm Machine width: 740 mm Machine height: 1120 mm Weight: 233 kg Isdpfx Absk Utqvs Aoib

Stanje: novo, Leto izdelave: 2025, Output: 40 - 100 kg/h Briquette diameter: 60 mm Iedpfoknyhpjx Ab Aoib Briquette length: 40 - 70 mm Automatic start: yes Oil preheating system: yes Max. material moisture: 15% Container diameter: 1000 mm Dimensions: 1850 mm x 1170 mm x 1510 mm (LxWxH) Motor power: 7.5 kW Control cabinet: with Siemens PLC and touch screen Weight: 770 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Felder Clean Air Extraction Unit | Dust Extraction System RL 200 | Ø 200 mm Maximum air flow: 4000 m³/h Rated air flow: 20 m/sec, 2300 m³/h Negative pressure: 2380 Pa Filter surface area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput capacity: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Ijdpfxowa Rlke Ab Ajib Hydraulic oil volume: 125 litres Year of manufacture: 2016 Condition: ready for operation Price: 15,500.- The system has already been dismantled and is stored at the Raasdorf warehouse.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Premer briketa: 40 mm Priključna moč: 4 kW Tlačna zmogljivost/kapaciteta na uro: odvisno od materiala Velikost posode: 1.044 x 1.044 mm Krmiljenje SPS Velikost hidravličnega rezervoarja: 100 l Nova razstavna naprava z 5 delovnimi urami Isdsvptrtepfx Ab Ajib

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer briketa: 50 mm, skupna masa: 340 kg, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, kapaciteta rezervoarja za olje: 60 l, stiskalna sila: 8 t, obratovalni tlak: 270 letvica, Oprema: hladilna enota, Hidravlična briketirna stiskalnica z glavnim motorjem 4 kW. Briket premera 50 mm. Kapaciteta: 30-50 kg/uro. 50-litrski rezervoar, oljni hladilnik. Isdjf Hmi Espfx Ab Aoib

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Iodpfxogfm Ryo Ab Ajib Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 700 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3617, Model/Tip: RUF 15/4000/70 Št. številka: 3617 Leto izdelave: 2023 Pogonski motor: 15 kW Zmogljivost do max.: 450 kg/h (odvisno od materiala) Pritisni tlak: ca. 4000 kg/cm² Oblika briketa: 70mm Delovne ure: ca. 700 ur Iedjt Sgrzopfx Ab Asib Garancija: 12 mesecev po dobavi Razpoložljivost: ca. 8 tednov po prejemu avansa Podrobnosti: + Siemens TP 700, Siemens S7-1200 + Podaljšek lijaka z mrežo + Električna emulzijska črpalka + Pršilna naprava + Pregledna vrata v lijaku

Stanje: novo, Leto izdelave: 2023, Output capacity: 15 - 70 kg/h Briquette diameter: 60 mm Automatic start: Yes Isdpok Utq Dsfx Ab Asib Oil preheating system: Yes Material moisture: max 15% Container size: octagonal, diameter 750 mm Hopper height: Dimensions: 1500 mm x 900 mm x 1065 mm (L x W x H) Motor power: 5.5 kW Control cabinet: electronically controlled via PLC Weight: 450 kg

Stanje: novo, Leto izdelave: 2025, Performance: 40 and 60 kg/h Automatic Start: Yes Iiedpfowhuulox Ab Ajb Oil Cooler: Yes Briquette Size: 50 mm diameter Briquette Length: 35 mm Hopper Capacity: 0.38 m³ Power Consumption: 5.5 kW Machine Length: 1860 mm Machine Width: 890 mm Machine Height: 1100 mm Weight: 400 kg

Stanje: novo, Leto izdelave: 2025, Performance: 25 and 40 kg/h Iisdpfjpfatpsx Ab Aeb Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Hopper capacity: 0.38 m³ Power consumption: 4 kW Machine length: 1,860 mm Machine width: 890 mm Machine height: 1,100 mm Weight: 400 kg

Stanje: novo, Leto izdelave: 2023, Output: 15 - 55 kg/h Briquette diameter: 55 mm Iiedek Utqyspfx Ab Aob Container size: octagonal, diameter 750 mm Hopper height: Dimensions: 1500 mm x 900 mm x 1065 mm (L x W x H) Motor power: 4 kW Control cabinet: electronically controlled via PLC Weight: 450 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke Izjemno visok pritisk stiskanja: 3.700 kg/cm² Velik lijak: 600 x 1500 mm Format briketa: 60 x 40 mm Zmogljivost: Isdpfew Ig Sujx Ab Aoib Aluminijevi ostružki – do 70 kg/h Jekleni ostružki – do 180 kg/h Medeninski ostružki – do 220 kg/h *odvisno od vhodnega materiala in nastavitev Vključeno: - Kad za emulzijo - Črpalka za emulzijo - Oljni hladilnik

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, obratovalne ure: 21.000 h, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2024, vrsta zaščite (IP koda): IP54, Stiskalnica za brikete RUF 400 CELOVITA LINIJA ZA BRIKETIRANJE NA VOLJO ZA NAKUP: Bobnasti sušilec za žagovino Vijak za podajanje Tračni transporter – 2 kosa Separator s lijakom Polžasti transporter – 6 kosov Isdjxu Ryuspfx Ab Ajib Skladiščni zalogovnik za mokre žagovine Zalogovnik za gorivo Kotlovnica na lesne odpadke Drogalnik lesnih odpadkov Izvlečni ventilator s ciklonom Pakirni stroj s kompresorjem Dodatne fotografije in informacije so na voljo ob resnem povpraševanju.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 56.927 h, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: ATM Recyclingsystems GmbH Tip: ArnoBrik 15 Leto izdelave: 2001 Premer briket: 150 mm Tehnični podatki Premer briket 140 oziroma 150 mm Kapaciteta: - litoželezni ostružki 4,8 – 5,3 t/h - jekleni ostružki 4 - 5 t/h Iiedpfx Abjxy E H He Asb - mešano briketiranje 4 – 5 t/h - aluminijasti ostružki 1,6 - 1,8 t/h Mešano briketiranje 4 - 4,5 t/h Žica pnevmatik 2,5 – 3 t/h Urna zmogljivost je odvisna od materiala Gostota briket pri jeklu in litini 5,5 kg/dm³ Obratovalni tlak 300 bar Zahtevan prostor (D x Š x V) 13.500 x 6.500 x 2.000 mm Teža stroja 30 t Glavna sila cilindra 5.300 kN Poraba olja 2.800 litrov Glavni pogon 4 x 30 kW Priključna moč z dodatki ca. 150 kW Višina briket 110 - 140 mm Teža briket - odvisno od materiala približno 10 - 16 kg Cikel časa približno 10 sekund

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 7.822 h, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: ATM Tip: ArnoBrik 10 Letnik izdelave: 2014 Premer briketa: 105 mm Tehnični podatki Glavne dimenzije Dolžina x širina x višina: 4.250 x 3.600 x 2.200 mm Teža približno: 10 t Premer briketa: 105 mm Višina briketa glede na material cca: 60 - 120 mm Funkcijski podatki Ciklični čas: 10 sek. Kapaciteta na uro - Aluminij: 850 - 1.060 kg/h - Jeklo, litina: 1.800 – 2.000 kg/h - Nikel: 1.800 – 2.000 kg/h Masa briketa aluminij: 2,0 – 2,5 kg Gostota briketa jeklo, litina: 5,5 kg/dm³ Iodpsxy E Evsfx Ab Aeib Gostota briketa aluminij: 2,2 – 2,5 kg/dm³ Hidravlična oprema Število zmogljivostno reguliranih aksialnih batnih črpalk: 2 kos Potrebna moč na črpalni sklop: 30 kW Delovni tlak: 300 bar Volumen hidravličnega rezervoarja: 1.300 l Električna oprema Pogonska moč: 70 kW Krmilna napetost: 24 V DC Obratovalna napetost: 3 x 400 V / 50 Hz

Stanje: dober (rabljeno), Leto izdelave: 2001, Dobre ohranjeno, rabljeno stanje Malo delovnih ur (1675 h) Motor: 11 kW Tlak: nastavljiv do največ 250 barov Pretok do največ 220 kg/h Briket: 150x60 mm Ijdpfxewcc D Ro Ab Aoib Dimenzije stiskalnice: pribl. 2200x3000x1920 mm (D x Š x V) Dimenzije krmilne omare: 500x1250x2120 mm (D x Š x V) Teža pribl. 3000 kg

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Ijdpfx Aogl Nlmob Ajib Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Iiedpfsd Nm Siex Ab Asb Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* Ijdpfoxfwdjx Ab Asib *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology Ijdpfx Aed Nnwleb Ajib + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO Ijdefci D Aepfx Ab Ajib • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: kot nova (razstavni stroj), Leto izdelave: 2010, Performance 180–300 kg/h Briquette diameter 50 mm Filling volume of hopper 0.3 m³ Lubrication pump 1.0 kW Motor power 15 kW Demonstration machine with low operating hours - Automatic press for briquetting wood chips and other waste materials Isdjxy S E Njpfx Ab Aoib - Oil pressure lubrication for highly stressed moving parts - Hydraulic clamp cylinder at the pressing clamp to improve briquetting quality - Electric control system for all operating processes - The press head can be heated or cooled during the briquetting process - Requirements for input material: Moisture content between 8 and 14% Particle size between 1 and 12 mm Technical data: - Total connected load: approx. 22.0 kW - Pressure on the piston: 2,000–2,500 kg/cm² - Vertical compression screw: 1.5 kW - Lubricating oil capacity: 50 liters - Feed screw to compression screw: 0.75 kW - High-pressure pump: 0.55 kW Equipment: 1 Electric press head heating system 1 Fan cooling unit for press head 1 V-shaped metering hopper for briquette press Heavy-duty steel frame design Inspection window including bridge breaker (drive shared with feed screw) Electromechanical level sensor 1 Cooling rail for briquettes L=4.0 m Briquette guide rails made from round steel complete with supports

Stanje: novo, Leto izdelave: 2025, Various models also available! Iiedsgwa Urspfx Ab Asb 1. Briquette diameter: Ø 80 mm 2. Capacity: 700-900 kg / hour (copper) 3. Preliminary ram force: 12.5 tons 4. Main compression cylinder force: 250 tons (5 tons / cm²) 5. Maximum operating pressure: 300 bar 6. Cycle time: 12 - 14 sec 7. Electric motor power: 30 kW 8. Machine dimensions (width x length x height): 2200 mm x 2600 mm x 2800 mm 9. Machine weight: 6,000 kg 10. Screw conveyor feeds automatically fill the compression chamber, and the integrated vibrating hopper ensures chamber safety by preventing oversized material from entering. 11. Cylinder rods are induction hardened and chrome-plated. 12. Hydraulic oil cooling system implemented. 13. Hydraulic system pumps and valves are sourced from globally renowned brands such as PARKER. 14. The machine is fully automatic with PLC control. 15. All electrical and electronic components are SCHNEIDER or SIEMENS brand. 16. The machine is CE-certified. The marking verifies compliance with European directives regarding consumer safety, health, or environmental requirements. 17. The machine is backed by an AYMAS Makina San. Ve Tic. Ltd. Şti. warranty against manufacturing defects for one (1) year or three thousand (2,500) operating hours.

Stanje: novo, Leto izdelave: 2025, Various models available! 1. Briquette diameter: Ø 200 mm 2. Capacity: 12,000 kg/hour (steel) 3. Preliminary pressure stroke: 50 tons Isdpfx Abegv I N Uj Aeib 4. Main compression cylinder pressure: 800 tons 5. Maximum operating pressure: 300 bar 6. Cycle time: 10 - 12 seconds 7. Electric motor power: 6x37=222 kW (main motors) 8. Machine dimensions: 11,000 mm x 10,000 mm 9. Machine weight: 60,000 kg 10. Screw conveyor feed automatically fills the compression chamber, and the integrated vibrating hopper ensures chamber safety by feeding oversized material into the chamber. 11. Cylinder rods are induction-hardened and chrome-plated. 12. Hydraulic oil cooling system is implemented. 13. Hydraulic system pumps and valves are from leading brands PARKER or BOSCH-REXROTH. 14. The machine operates fully automatically via PLC control. 15. All electrical and electronic components are supplied by SCHNEIDER or SIEMENS. 16. The machine is CE certified. The CE marking certifies that the product meets European guidelines regarding consumer safety, health, and environmental protection. 17. The machine is covered by an AYMAS Makina San. Ve Tic. Ltd. Şti. warranty against manufacturing defects for one (1) year or three thousand (2500) operating hours.