Almizopf Orodje Za Zarezovanje Cevi nakup rabljenega (98.391)

Stanje: novo, Leto izdelave: 2026, Motor: 4 kW Voltages: 230V 3-phase, 400V 3-phase, or 460V 3-phase Belt speed: 45 m/s, 4300 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Grinding diameter: Ø20–Ø114.3 mm Grinding angle: 20° – 90° Operation: Lever and manual wheel controls 2-in-1 Tube Notcher The new AL150HS features a belt speed of 45 m/s due to its unique gearbox. By opening the rear hatch, the tube notcher can also be used as a belt grinding machine, ideal for deburring polished profiles. The AL150HS can be operated either via two handwheels or a lever—both options are available on the machine. The AL150HS allows you to grind material from Ø20 to Ø114.3 mm. Both the cross support and the carriage with rotating clamp are infinitely adjustable. This means all tube profiles can be ground at any desired angle from 20° to 90°. With the AL150HS by ALMI, square, rectangular, and round tubes with varying wall thicknesses and all standard materials can be processed. The ALMI belt adjustment system makes it even easier to set the grinding belt using the supplied hex key. The belt can be quickly tensioned, and the grinding rollers can be changed within seconds. High-Speed Grinding Hedpfxozzk Aie Ah Hent Thanks to new developments, ALMI has achieved a grinding speed of 45 m/s with the updated AL150HS. This provides the grinding belt with a longer service life, as higher grinding speed reduces heat generation in the material, resulting in less discoloration and fine dust.

Stanje: novo, Leto izdelave: 2026, Motor: 4 kW Belt speed: 30 m/s, 2800 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Grinding diameter: Ø20–Ø114.3 mm Hsdpfx Ahezzkzxs Hent Grinding angle: 20–90º Operation: Lever and manual wheel operation Weight: 260 kg Easy to operate The AL150 can be operated with two handwheels or with a lever. Both options are available on the machine. With the AL150, you can grind material from Ø20 up to Ø114.3 mm. The cross support and the carriage with swivel clamp are continuously adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. The AL150 from ALMI grinds square, rectangular, and round pipes with various wall thicknesses and is suitable for all common materials. The ALMI belt tensioning system makes adjusting the grinding belt with the supplied hex key even easier. The sanding belt can be quickly tensioned, and the grinding rollers can be changed within seconds. 2-in-1 tube grinder The AL150 is equipped with a deburring table, making it easy to deburr pipes, which makes the tube grinder multifunctional.

Stanje: dober (rabljeno), Leto izdelave: 2017, Stroj je v dobrem tehničnem stanju, po dogovoru je možno opraviti preizkus. Stroj za brušenje je idealen za obdelavo ravnih, okroglih cevi ali ovalnih cevi. Stroj ima orbitalni sistem, ki omogoča večnamensko uporabo. Dovod obdelovancev in odpiranje trakov je avtomatsko. Velikost obdelovanca: premer 10–114 mm. Minimalna dolžina obdelovanca pri avtomatskem sistemu za dovod: 355 mm. Število brusnih trakov: 6. Hnjdpfjzp Nutox Ah Hot Skupna moč: 14 kW. Hitrost brusnih trakov: 10–30 m/s.

Stanje: novo, Leto izdelave: 2025, skupna širina: 910 mm, skupna dolžina: 1.600 mm, skupna višina: 1.360 mm, vrsta vhodnega toka: trifazni, skupna masa: 360 kg, Premer cevi (maks.): 140 mm, vhodna napetost: 380 V, dolžina transportnega traku: 2.000 mm, moč: 2,4 kW (3,26 KM), največja hitrost vrtenja: 2.800 obr/min, vrtljajska hitrost (min.): 1.400 obr/min, Ponujamo nov TUGRA TT 140 brusilnik za cevi, letnik 2025. Kapaciteta primeža (premer): 40 - 140 mm Dimenzija traku: 150 × 2000 mm Moč/napetost motorja: 2,4–3/380 kW/V Hitrost (dvojna): 1400, 2800 vrt/min Dolžina: 1600 mm Širina: 910 mm Višina: 1360 mm Hnodpozbzvzjfx Ah Het Teža: 360 kg V primeru vprašanj ali če potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: novo, Leto izdelave: 2025, - Kapaciteta 17–90 mm - Opremljeno z 10 valji - Nastavitev kota - Dokumentacija Hnjdpslwq R Ssfx Ah Hst - 400 V

Stanje: novo, Condition: New Hnedpfx Ahjynmqdj Hjt Delivery time: approx. 2–4 weeks from order Country of origin: Netherlands Price: €6,352 Leasing rate: €122.59 Abrasive belt dimensions: 150 x 2,000 mm Pipe diameter: 20–114.3 mm Lever adjustment: 1 Handwheel adjustment: 1 Motor power: 4 kW Weight: 270 kg The AL150 model can be operated either with two handwheels or with a lever. Both options are available on the machine. With the AL150 you can notch material from Ø20 to Ø114.3 mm. The support cross and carriage with rotating clamp are infinitely adjustable. This allows all pipe profiles to be notched at any required angle from 30° to 90°. The ALMI AL150 machines out square, rectangular, and round pipes with various wall thicknesses and is suitable for all common materials. Thanks to the ALMI belt adjustment system, setting the abrasive belt with the supplied hex key is now even easier. The abrasive belt can be quickly tensioned, and the grinding rollers can be changed within seconds. The pipe notchers are equipped with a deburring table. Including 5 abrasive belts and 1 grinding roller Ø42.4 mm (Product image for reference)

Stanje: rabljeno, Tube Notching Tool, Tube Notcher - Max. tube diameter: 60 mm - Eccentric clamping Hnodpeb Dwrzofx Ah Hjt - Tube holder: swiveling - Dimensions: 480/160/H380 mm - Weight: 28 kg

Stanje: novo, Leto izdelave: 2026, Brusilnik cevi AL 100 U ⦁ brusi pod vsakim želenim kotom ⦁ brusi vsak želeni premer ⦁ brusi vse običajne materiale ⦁ primeren za cevi in profile - Upravljanje z ekscentrično ročico - Brusilni trak 100 x 2000 mm - Motor 3,0 kW 400 V 50 Hz Hnodex Irvmspfx Ah Hjt - Število vrtljajev 2905 vrt./min - Hitrost traku 30 m/s - za cevi od 20 mm do 76 mm - Teža 200 kg

Stanje: novo, Leto izdelave: 2025, Premer cevi 20 - 76 mm Dimenzija brusilnega traku 100 x 2000 mm Število vrtljajev 2905 obr/min Hitrost traku 30 m/s Moč motorja 3 kW Napetost 400 V Teža 200 kg Upravljanje preko ekscentrične ročice Hnodjyv Nvyjpfx Ah Hot Oprema/Dodatki: - Brusilni valji 1/2", 3/4", 1", 1 1/4", 2", 2 1/2" - Nosilec brusilnih valjev

Stanje: novo, - Capacity 16–76 mm - With 10 rollers Hjdpfx Asphqgzoh Hent - Angle adjustment - Documentation - 400V

Stanje: dober (rabljeno), Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool Hsdpjgrzuujfx Ah Hont -Manufacturer: Perthel, pipe bending tool for profile bending machine -Profile diameter: pipe size 16 - 76 mm / 3/8" to 3 1/4" -Dimensions: 1020/310/H170 mm -Weight: 28 kg

Stanje: dober (rabljeno), Stroj za obročasto krivljenje, stroj za krivljenje profilov, trivaljni stroj za krivljenje, stroj za krivljenje, orodje za krivljenje cevi Hedpfx Aoxmirtoh Hsnt -Orodje za krivljenje cevi: 9 kosov -Premer profila: 27 do 60 mm, glej slike -Vpenjanje: Ø 32 mm -Dobava/cena: komplet -Transportne mere: 655/350/V120 mm -Teža: 42 kg

Stanje: rabljeno, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool - Pipe bending tools: 6 pieces - Profile diameter: 32 to 80 mm, see photos - Mounting: Ø 36 mm - Price: complete set Hnedef Ngcropfx Ah Het - Dimensions: 490/540/H190 mm - Weight: 50.1 kg

Stanje: rabljeno, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 65/49 mm -Mounting: dimensions see photos Hnodpfof Nrp Tsx Ah Hot -Price: complete -Dimensions: 195/400/H220 mm -Weight: 42.7 kg

Stanje: dober (rabljeno), Pipe peeling device, rotary peeling device, plastic pipe cutter, plastic pipe peeler, plastic pipe welding machine Hnjdpfx Ahjb A H A Rs Hjt -Diameter: Ø 32 mm -Weight: 0.4 kg

Stanje: rabljeno, Pipe bending tool: 1 piece - Profile diameter: 3/8" - Mounting: Ø 36 mm - Dimensions: 100/75/H50 mm Hjdpsmu Rnpjfx Ah Hent - Weight: 1.2 kg

Leto izdelave: 1990, stanje: dober (rabljeno), številka stroja/vozila: V 254xxx, Lg.-No. 22462 Technical Specifications: - Cutting length: 250 mm Hsdpfoiluqmox Ah Hent - Cutting angle: 90° - Cutting capacity: - Mild steel up to: 4 mm - Stainless steel up to: 3 mm - Aluminium up to: 5 mm - Strokes per minute: up to approx. 55 1/min - Table size: W 800 x D 800 mm - Working height approx.: 940 mm - Stops: infinitely adjustable in length and angle - Drive: 400 V / 4 kW - Oil filling: 50 l - Electric foot switch - Required space approx.: W 800 x H 1250 x D 900 mm - Weight approx.: 700 kg

Stanje: dober (rabljeno), Leto izdelave: 1990, številka stroja/vozila: V 254326, Offer 22407 Technical Specifications: - Cutting length: 250 mm Hsdpfxoif Aqvj Ah Hont - Cutting angle: 90 ° - Cutting capacity: - Mild steel, up to: 4 mm - Stainless steel, up to: 3 mm - Aluminium, up to: 5 mm - Stroke rate: up to approx. 55 /min - Table size: W 800 x D 800 mm - Working height approx.: 940 mm - Stops infinitely adjustable in length and angle - Drive: 400 V / 4 kW - Oil capacity: 50 l - Electric foot switch - Space requirement approx.: W 800 x H 1250 x D 900 mm - Weight approx.: 700 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, model krmilnika: Siemens Touch Panel KTP 600, Kot upogiba (maks.): 180 °, radij upogibanja (maks.): 200 mm, skupna masa: 500 kg, moč: 1,5 kW (2,04 KM), Brez minimalne cene – zagotovljena prodaja po najvišji ponudbi! TEHNIČNE PODROBNOSTI Smer upogibanja: desna Premer cevi (jeklo): 4–28 × 3 mm Premer cevi (barvne kovine): 4–35 × 2 mm Polmer upogibanja: maks. 200 mm Višina upogibanja: 25 mm Hitrost upogibanja: do 45 °/s Učinkovit kot upogibanja: do 180° + 10° dodatnega upogibanja Natančnost izklopa: 0,1° Dolžina podiranja cevi: 1.500 mm PODROBNOSTI O STROJU Nadzor: elektronski Model nadzora: Siemens Touch Panel KTP 600 Os upogibanja: elektronsko upravljana Samodejno preklapljanje kota upogibanja Pomnilnik programov: 100 programov, vsak z 20 podatkovnimi zapisi Prikaz ciljne in dejanske vrednosti kota upogibanja Objem cevi: hidravlični Objemni tlak: nastavljiv Nastavitev drsne plošče: hidravlična Hidravlični izmet upogibnega trna Vrsta črpalke: HD-zobniška črpalka Moč črpalke: 4,5 l/min Hidravlični tlak: 180 bar Upogibna glava: samostojna Nadzorna plošča: vrtljiva Izvedba stroja: mobilna Maksimalna raven hrupa: pribl. 78 dB(A) Vrsta pogona: elektrohidravlični Moč pogona: 1,5 kW Omrežna napetost: 400 V Frekvenca: 50 Hz Faze: 3 Nadzorna napetost: 24 V DC Električni standard: VDE Stopnja zaščite: IP54 Dimenzije in teža Dimenzije (D x Š x V): 2.200 x 600 x 1.100 mm Teža: 475 kg OPREMA Siemens Touch Panel KTP 600 Funkcijski gumbi z jasnim prikazom za pomoč operaterju Samodejno preklapljanje kota upogibanja Prikaz ciljne in dejanske vrednosti kota upogibanja Vrtljiva nadzorna plošča Samostojna upogibna glava Hidravlični objem cevi z nastavljivim objemnim tlakom Hidravlična nastavitev drsne plošče Hidravlični izmet upogibnega trna Mobilna izvedba stroja Višina in teža opreme morata biti nujno upoštevani pri izbiri transportnega vozila. Za natovarjanje je na voljo viličar. V primeru zamude pri prevzemu se zaračunava strošek skladiščenja v višini 20,00 € na lot in začeti dan. Strošek je treba plačati pred prevzemom. Prodaja poteka brez garancije in jamstva. Podatki o tehničnih specifikacijah izvirajo iz prvotne ponudbe. Hnodpfx Ajzzlc Rsh Hjt Za tiskarske in merilne napake ne odgovarjamo. V primeru dvoma primerjajte podatke s priloženimi fotografijami ali si oglejte blago na kraju samem pred koncem dražbe.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, trajanje garancije: 60 meseci, Effective tube cutting length: 6500mm Laser output power: 6000W / 3000W / 2000W / 1500W Effective round tube cutting diameter: Φ20-360mm Effective square tube cutting diameter: □20*20–□254*254mm Edge length: 20–300mm Outer circle diameter: ≤360mm X / Y axis positioning accuracy: 0.05mm X / Y axis repositioning accuracy: 0.03mm Maximum X axis speed: 100m/min Maximum Y axis speed: 95m/min 1. Bigger than ever The maximum cutting diameter of the T Series is 30% longer than traditional products on the market; the maximum cutting weight is 100% heavier compared to conventional products on the market. 2. Spindle positioning control, torque control function The CNC self-centering spindle with independently held intellectual property rights can automatically clamp the material according to the size of the incoming tube; Position monitoring in torque mode ensures that thick tubes stay secure and thin tubes do not deform; Brand-new dustproof design ensures durable, delay-free operation. 3. Edge and center detection New edge and center search functionality. Optimized edge search methods and algorithms deliver higher cutting accuracy and stability. 4. Touch control Hnsdpfx Ahog D Nzis Hst The world’s first interface design to allow the display to respond to the processing table, making operation more intuitive. Capacitive 10-point HD touchscreen 1920*1080. Sleek curves perfectly match the machine’s body. Robust waterproof ventilation system creates the best working environment, making operations more convenient. Diamond-cutting process and HD plasma tempered glass make the screen more refined and pleasant to use. A comfortable working method and positive mood can greatly improve work efficiency.

Stanje: novo, Stanje: novo Hnjdpjwiqxijfx Ah Hst Dobavni rok: približno 4 tedne od oddaje naročila Država izvora: Italija Cena: 3620 € maks. premer (jeklena cev): 38 mm dolžina: 245 mm širina: 300 mm višina: 320 mm teža: 23 kg maks. upogibni modul: 19 cm³ standardna jeklena cev: 38 x 1,5 mm cev za izdelavo pohištva: 38 x 1,5 mm St35 (za hidravlične cevi): 35 x 3 mm nerjavno jeklo AISI304-318: 30 x 2 mm nerjavno jeklo AISI308 (za živila): 35 x 1,5 mm medenina, mehka: 42 x 1,5 mm trdni baker in aluminij: 42 x 1,5 mm baker, mehak: 50 x 2 mm zaščitna cev (TAZ): 50 x 2 mm Mepla, Gebereit in podobno: 50 x 4 mm okrogla jeklena palica (S275JO): 20 mm ravna jeklena palica (S275JO): 10 x 25 mm ploščata jeklena palica (S275JO): 25 x 20 (pokončno), 25 x 1 mm maks. upogibni radij: 180 mm min. upogibni radij: 36 mm min. premer cevi: 10 mm maks. hitrost upogibanja: 2,8 vrt/min motor: 0,9 kW nastavitev upogibnega kota: 0 - 180° enofazni motor: 230 V / 900 W električna motorna zavora kontrolna lučka za prikaz preobremenitve podstojna konstrukcija iz kovanega jekla – primerna za pritrditev na stojalo (stojalo ni vključeno) upogib pod kotom 90° v 6 sekundah pedal brez orodja OPCIJA: podstojna konstrukcija s stojalom: 345 €

Stanje: dober (rabljeno), Leto izdelave: 1984, Glava za brušenje: - moč motorja: 2,2 kW - hitrost vrtenja vretena: 1.000 – 8.000 vrt/min - naklon vretena (os A): -10° do +27° - natančnost nastavitev: 1 minuta - nastavitev višine (os Y): 130 mm - obseg giba (os X): 220 mm - obseg nihajnega giba, brezstopenjsko nastavljivo med nihanjem: 0–30 mm - frekvenca nihanja: 30/60 1/min Delovna glava: - nastavitev polmera (os Z): 0,01–50 mm - natančnost nastavitev: 0,01 mm - umik drsnika od brusilnega do merilnega položaja: maks. 49 mm - križna miza, površina za vpenjanje: 155 x 205 mm - gib X – Y: vsaka 60 mm - največji kot vrtenja (os B): 260° - napetost napajanja: 380 V - teža: 1200 kg Dodatna oprema/opcije: - spremenljiv brušilni pritisk - projektor, pritrjen v merilnem položaju - 1 omara z dodatno opremo - različne brusilne glave, prirobniki - rezervoar za hladilno tekočino - dokumentacija Hnedpfx Ajvmpaboh Het Na zalogi v našem skladišču.

Stanje: novo, Leto izdelave: 2024, - FAGOR 3-axis digital readout, model: 400iB INNOVA - Milling head manually swivels ±90° - Manual tool clamping via M16 draw bolt for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Servo motors with inverter for X/Y/Z axes - Ball screws in X/Y/Z axes - Gearbox for 18 spindle speeds - Counter-support with support bearing - 1 pc. long milling arbor 27 mm - 3 pcs. reduction sleeves (MK1, MK2, MK3) - Spindle guard with safety switch - Splash guard on 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guideways - Mechanical handwheels for X/Y/Z axes - Coolant system - Covers for X/Z axes - Operating tools - Technical documentation - CE-compliant version Colours: - RAL 7024 – Graphite grey - RAL 7035 – Light grey Technical Data: Fixed Angle Table: - Working surface dimensions: 1,000 x 540 mm - T-slots: number / width x spacing: 8 pcs. / 14 x 63 mm - Max. table load: 300 kg Vertical Table: - Working surface dimensions: 1,200 x 250 mm - T-slots: number / width x spacing: 8 pcs. / 14 x 63 mm Travels: - Axis travels: automatic/manual - Longitudinal (X): 600 mm - Cross (Y): 500 mm - Vertical (Z): 400 mm Vertical Milling Head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 40 – 3,200 rpm - Number of spindle speeds: 18 (40 – 65 – 83 – 100 – 130 – 160 – 200 – 250 – 400 – 330 520 – 650 – 820 – 1,020 – 1,280 – 1,600 – 2,000 – 3,200) - Quill stroke, manual: 100 mm - Head swiveling: ±90° - Distance spindle nose/table: 70 – 470 mm - Distance spindle centre to column – min./max.: 160 / 660 mm Horizontal Spindle: - Tool holder: ISO 40 / DIN 2080 - Number of gear steps: 18 - Speed range: 40 – 3,200 rpm - Distance spindle centre / to 2nd T-slot: 95 – 495 mm - Distance spindle centre / to 3rd T-slot: 180 – 580 mm Feeds: - Infinitely variable - Range (X,Y,Z): 0 – 600 mm/min - Rapid traverse (X, Y, Z axes): 600 mm/min Motors: Hjdpevunrfefx Ah Hsnt - Main drive power: 3.75 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight: - Dimensions (W x D x H): 1,881 x 1,813 x 1,916 mm - Weight: 1,600 kg

Stanje: novo, Universal tool milling machine according to DIN 8615. The torsion-resistant machine base made from MEEHANITE® quality cast iron and the high-precision, hardened and ground guideways on all axes guarantee high precision and durability. With the 3-axis digital display, all values are directly accessible, and with the user-friendly control panel on a swivel arm (OPTION), it can be individually positioned. Fixed angular table clamping area: 900 x 500 mm Max. workpiece weight: 360 kg Tool holder horizontal/vertical: ISO 40 Main spindle motor output / 100% duty cycle: 3.75 kW Feed motor output X/Y/Z axis: 1.0 / 1.0 / 1.5 kW Total connected load: 7.4 kVA Speed range: 40 - 3800 rpm Number of speed steps: 18 Manual quill stroke: 120 mm Swivel range: +/- 90° Travel path X (automatic/manual): 600 mm Travel path Y (automatic/manual): 460 mm Travel path Z (automatic/manual): 380 mm Stepless feed range X/Y/Z: 10 - 650 mm/min Rapid traverse: 1000 mm/min Dimensions LxWxH, approx.: 1850 x 1650 x 1900 mm Weight, approx.: 1780 kg Equipment: - 3-axis digital display (e.g. FAGOR® Innova), with various comfort functions, on a user-friendly swivel arm (OPTION) - DC servo motors on all X/Y/Z axes, e.g. from DELTA® - Spindle run-out max. 0.005 mm, incl. inspection protocol according to DIN 8615 (rolling bearings SKF®/NSK®) - Spring-loaded safety handwheels on all axes, e.g. from GANTHER® - Torsion-free machine bed made from MEEHANITE® quality cast iron - High-precision, hardened and ground guideways on all axes with TURCITE®-B coating - Backlash-free HIWIN® precision ball screw spindles on all axes - Electronic overload protection on all axes - Multi-adjustable spindle guard, secured by micro limit switches - Automatic intermittent central lubrication - Drill quill - Swiveling control panel on a cantilever arm (approx. 1,600 mm) (OPTION) - Hydraulic tool clamping - Electrical components SIEMENS®, BALLUFF® Hsdpfx Aheuxt N Ij Hont - Coolant system - Horizontal machining unit - LED machine lamp - Generously sized chip tray - Inspection protocol in accordance with DIN 8615 - Operating tools - Operating manual, spare parts list, including electrical diagrams etc. in German - CE

Stanje: delavnici obnovljeno (rabljeno), Stroj za obdelavo z orodjem: Deckel Tip: FP 2 Stanje: Geometrijsko obnovljen, rabljen Leto izdelave: 1980. leta, geometrijska obnova leta 2026 Tehnični podatki: Hodi v smeri X/Y/Z, pribl.: 400 / 200 / 400 mm Vpenjalno orodje: S20 Število vrtljajev: (18) 40 - 2000 min-1 Podi: (18) 8 - 400 mm/min Glava, možnost nagiba: 180° Hnodpfx Aszcdarjh Het Oprema: - Protokol geometrijske obnove - 3-osna digitalna prikazovalna enota, nova - Zaščitna naprava za vreteno z končnim stikalom, nova - Strojna luč, nova - Horizontalno in vertikalno vreteno - Fiksna nagibna miza - Sistem za hlajenje - Posoda za odrezke