4 Stück Bonfiglioli Getriebe Jb00001227 nakup rabljenega (60.397)

Stanje: dober (rabljeno), 4 x Bonfiglioli Wind turbine gearbox JB00001227 SN B6201603697 Hedpowg E Utefx Aiqou

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Ponujamo dve zelo dobro ohranjeni parni kotli Bosch UL-S 14000, letnik 2014. Proizvajalec: 2 kosa Bosch Hedpfjzg Nt Dox Aiqju Tip: 2 kosa UL-S 14000 Leto izdelave: 2014 Za vprašanja ali dodatne informacije nam lahko pošljete sporočilo ali nas pokličete.

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: JB00001227, 92 kosov – pogonske enote za usmerjanje (yaw drive) podjetja GE Renewable Energy – Bonfiglioli & NGC – št. artikla 448W3942P001 Ponujamo planetarne prevodnike pogona za usmerjanje (yaw drive) podjetja Bonfiglioli Trasmital, izdelane za uporabo v vetrnih turbinah podjetja GE Renewable Energy. Na zalogi je skupno 48 enakih enot. Navedena cena 2.000 ameriških dolarjev je cena za eno enoto. Kupci lahko kupijo eno enoto ali poljubno količino. Ni obveznosti za nakup celotne zaloge. Ti prevodniki se uporabljajo v sistemu za usmerjanje (yaw system) vetrne turbine za vrtenje in pozicioniranje gondole glede na smer vetra. Visoko redukcijsko razmerje pretvarja moč električnega motorja v nizkohitrostno, visokozmogljivo rotacijsko gibanje, potrebno za nadzorovano pozicioniranje gondole. Nekatere enote so bile morda delno razstavljene za lažji in varnejši transport. Na primer, električni motor za usmerjanje je bil morda ločen od mehanskega prevodnika. Vse ustrezne komponente so kompletne, ločene dele pa je mogoče ponovno sestaviti. Tehnične specifikacije: Hodpjznu Rqjfx Aiqsu Na voljo je 92 pogonskih enot za usmerjanje (yaw drive) podjetja GE Renewable Energy za prodajo v Turčiji. • 64 pogonskih enot za usmerjanje (yaw drive) podjetja Bonfiglioli • 28 pogonskih enot za usmerjanje (yaw drive) podjetja NGC • GE št. artikla: 448W3942P001 • Bonfiglioli VMN: JB00001227 • 36 enot s kompletnimi električnimi motorji • 56 mehanskih pogonskih enot za usmerjanje (yaw drive) brez motorjev • NGC enote, opremljene z električnimi motorji z močjo 5,5 kW • Enote so bile dobavljene/uporabljene v kompletih po 4 enote na turbino • Iz flote vetrnih turbin GE z močjo od 1,7 do 3,2 MW • Leto proizvodnje: 2020 • Lokacija: Izmir, Turčija • Skupna količina na voljo: 92 enot Na voljo posamično ali kot celoten komplet. Na zahtevo so na voljo fotografije, videoposnetki in dodatne tehnične informacije. Izdelki lahko kažejo znake dolgotrajnega skladiščenja in transporta, vključno z obrabo barve, umazanijo, manjše površinske oksidacije in korozijo na izpostavljenih strojno obdelanih kovinskih površinah. Enote so na voljo v trenutnem stanju, kot je prikazano na fotografijah. Komponente so kompletne. Vendar je treba pred nakupom potrditi stanje električnega in mehanskega testiranja. Popolnost komponent ne smete razlagati kot potrditev, da je bila vsaka enota funkcionalno testirana. Na zahtevo lahko zagotovimo posamezne serijske številke, dodatne fotografije, mere, informacije o teži in podrobne informacije o obsegu dobave. Enote so na voljo za posamične ali množične nakupe. Stranke lahko naročijo poljubno količino glede na svoje potrebe. Cena: 2.000 ameriških dolarjev na enoto Na voljo zaloga: 48 enot Minimalna količina naročila: 1 enota Pogoji dostave: FCA, skladišče prodajalca, Turčija, Incoterms® 2020.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 586, MODEL – C/A4 SCIVOLO 70 YEAR OF MANUFACTURE – 2006 Hjdju Nvhzepfx Aiqeu CHASSIS NUMBER – 586 ENGINE TYPE – DIESEL

Leto izdelave: 2001, stanje: rabljeno, Gear motor, electric motor, electro-geared motor, helical gear motor suitable for strapping machines, packaging machines, strapping machines, skin pack machines, wrapping machines, winding machines, drive unit for stretch wrapping system Hjdpou Npgdefx Aiqou -Manufacturer: Bonfiglioli, drive unit from ILAPAK Astra-STD packaging machine -Gearbox: Type W63 U P80B14 i= 30 -Motor: 0.75 kW -Speed: 46.6 rpm -Individual components: see photos -Dimensions: 480/350/H250 mm -Weight: 22 kg

Leto izdelave: 2002, stanje: rabljeno, electrical clutch brake, clutch/brake combination, clutch-brake unit for strapping machine, packaging machine, strapping machine, skin packaging machine, wrapping machine, drive unit for stretch wrapping system - Manufacturer: Bonfiglioli, drive unit from ILAPAK Astra-STD packaging machine - Type: GFF 200014/112 EE B3 - Motor: 24 VDC / 35 W - Individual components: see photos - Dimensions: 345/180/H230 mm - Weight: 22 kg Hjdpfxeu Npg Rs Aiqju

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Prodajam, ker ga ne uporabljam. Hsdpfjz Ellwex Aiqju

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) Hodpfoguk Dkex Aiqju - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Leto izdelave: 2003, obratovalne ure: 4 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Reduktor, proizvajalec Bonfiglioli, premer 1:720. Hjdpfx Aijzkvbcoqou Uporabljen 4 ure za tehnično testiranje.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing Hjdpfx Aijguk Dvoqou - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, KOMPLET MENJALNIKOV Hedpfov T Ti Tex Aiqju Številka dela 82452533 DH1000 3ST (3-stopenjski) i=112,3 4 kosi DEMAG menjalnikov DH1000, vrhunsko stanje, kot novi Cena novega kosa: 23.135,06 € neto, prodajna cena po kosu: 16.900,00 € neto 4 kosi vstavne gredi / Steckwelle DH1000H16, art. št. 82417633, novi Cena novega kosa: 1.796,76 € neto, prodajna cena po kosu: 1.290,00 € neto Tisoče DEMAG rezervnih delov na zalogi Brezplačna dostava znotraj Nemčije! Informacija! Na zalogi več kot 30.000 DEMAG rezervnih delov in komponent! Skladišče rezervnih delov za dvigala Demag

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) Hsdpfjfdkbhex Aiqju - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Hedpjfdkb Ujfx Aiqsu Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) Hjdpfx Aofdkb Teiqsu - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. Hsdpfjguk A Hsx Aiqsu The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 7.293 h, skupna višina: 9.500 mm, skupna dolžina: 34.500 mm, skupna širina: 14.550 mm, Leto izdelave: 2018 Model: 10HM Drake Število motornih ur: 7293 ur Minimalne dimenzije prostora: 34500 mm x 14550 mm x 9500 mm Hedszmul Eopfx Aiqju Moč električnega motorja Siemens: 550 kW Širina delovnega valja: 1000 mm Razpored: 10 kladiv, 3-2-3-2 (teža posameznega kladiva: 105-117 kg) Proizvodnja: 14 ton/uro Magnetni separator (jeklo) - 2 kosa Separator za ločevanje neželeznih kovin (eddy current) Bubenasti sito Rezervni deli: Zaslonka, 3 kompleti kladiv, vijaki, trakovi tekočih trakov, senzorji, 6 sit, reduktorji V primeru vprašanj ali potrebe po dodatnih informacijah nas kontaktirajte.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Hodped Tbbdofx Aiqju - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice Hsdped Tqalsfx Aiqeu - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Leto izdelave: 2010, stanje: rabljeno, 0,75 kW Izstopna votla gred s peresom Pogonski zobniški kotni reduktorji (helikalni) Prenosno razmerje 43,2 Montažni položaj: VB Hodpfx Ash I D Ntjiqeu

Stanje: novo, WHZ 7948A5TROUHP3 komplet poševno-krogličnih ležajev, komplet = 4 kosi, neuporabljen v odprti originalni embalaži, 100 % delujoč, obseg dobave glede na slike Hjdpfoz Adnbox Aiqeu

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: RU0007555 - Koda proizvajalca: MP080.2.36.15.14 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušeno - Združljiv stroj: - Če ste zainteresirani, nudimo storitev servisa, kontaktirajte nas. 5KG - 36X26X21 Hodpfx Aieybbmgsqou

Stanje: rabljeno, Geared motor, electric motor, three-phase motor, geared electric motor -Gearbox manufacturer: Bonfiglioli, type MVF 63/P Hjdpfx Asrkp Nfeiqju -Speeds: approx. 29 rpm, i= 45 -Motor manufacturer: Lafert, type AFS 63/4 -Power: 0.22 kW / 1307 rpm -Design: B14 flange, right-angle -Shaft: Ø 25 x 80 mm -Protection class: IP 54 -Dimensions: 390/265/H195 mm -Weight: 13 kg

Stanje: rabljeno, številka stroja/vozila: 19762,

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 9.800 h, Ponujamo ta rabljen Bonfiglioli Drake 2000 kladivni mlin, izdelan leta 2006. Maksimalna moč glavnega motorja: 400 kW Nazivna napetost: 400/690 V Frekvenca: 50 Hz Vključuje: Kladivni mlin, dvojni magnetni ločevalni sistem za železne kovine, Gaussov separator za neželezne kovine, sistem za odsesavanje, transporterje in električno omarico. Za dodatna vprašanja ali več informacij nam pošljite sporočilo ali nas pokličite. Hodpfezc I S Ejx Aiqsu

Stanje: dober (rabljeno), Reduktorski motor, elektromotor, trifazni motor, elektro reduktorski motor - Proizvajalec: Bonfiglioli, reduktorski motor - Reduktor: tip 200220031 MVF 27/F 210 vrt/min - Motor: tip BN 27C 4 - Moč: 0,09 kW - Konstrukcijska oblika: B14 kotni - Gred: Ø 9 x 28 mm - Zaščita: IP 55 - Dimenzije: 263/150/V110 mm - Teža: 3,5 kg Hjdpfx Asvzxytoiqou