Škarje za odpadno železo Bonfiglioli

Bonfiglioli C/A4 SCIVOLO 70

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, pritisk: 70 letvica, skupna višina: 1.600 mm, skupna širina: 800 mm, skupna dolžina: 1.200 mm, temperatura: 40 °C, obratovalni tlak: 70 letvica, raven hrupa: 80 dB, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 l/day Potable Water Compact, fully automatic reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, small industrial and utility facilities. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: approx. 15,000 l/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salt content) Permeate Quality: Drinking water, approx. 500 mg/l residual minerals (reference value) Recovery Rate: approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: approx. 25 °C (operating range approx. -2 to 35 °C) Process Technology & Construction DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Generally no chemical feed water pretreatment (no acid dosing) required Integrated rinse and CIP function, controlled via PLC Skid-mounted on stainless steel frame (AISI 316) High-pressure piping in stainless steel, low-pressure side in seawater-resistant plastic Pump parts in contact with seawater made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: approx. 1,000 l/h (reference value) Operating Pressure RO Module: High pressure range, designed for seawater desalination Power Connection: 230 V, 50 Hz, 1~ Power Rating: approx. 6 kW Control, Monitoring & Safety Local control panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown, including: Fpjdpfx Asw Uf Ihohmoh - Insufficient inlet pressure - Exceeding the allowable operating pressure - Overpressure in the permeate/concentrate line - Exceeding defined conductivity limits (with automatic diversion to drain) Automatic “Stop & Rinse” function: rinse of seawater-carrying components with permeate upon shutdown to reduce fouling during idle periods Dimensions & Weight (Skid) L × W × H: approx. 1,190 × 705 × 1,500 mm Weight: approx. 530 kg (dry), approx. 605 kg (in operation) Typical Applications Ships, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility facilities Backup or peak-load system for existing drinking water production Further technical documentation, photos, as well as information regarding scope of delivery, pricing, and availability are available on request.

Stanje: rabljeno, Leto izdelave: 2026, obratovalne ure: 15 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam material, and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a driven rotary knife, electrically oscillating knife, and a milling cutter (incl. extraction system) • Multifunctional tool head for the use of up to 2 interchangeable tools • Powerful vacuum blower for material fixation • Standard delivery includes a grey conveyor belt table (conveyor). Teal exchange conveyor available on request (offers high contrast for dark materials) Additional tools available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven rotary knife • UCT universal knife (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angular cutting knife • Print mark detection • Camera registration • Punch tool for notches or holes • Milling cutter with extraction system User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Quick payback • Low costs with high added value • Optimal material utilization through nest expert software modules (not included) • High speed • Consistent precision Technical data: • Short cutting times due to high positioning speed of up to 90 m/min • Repeatability +/- 0.25 mm • Cuts single or multiple layers Fpsdpfsif Ek Rjx Ahmjh • Suitable for both sheet and roll material (can be extended with a suitable unwinder) • Quick payback (Product photo as example) The machine is CE certified.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Cryogenic gas semi-trailer for LNG (liquefied methane). Manufacturer: CRYOCAN EU approval. Year: 2011 Volume: 50.25 m³ Vacuum certificate Fodpjtulh Iefx Ahmjph We also have other tankers for LIN, LOX, LAR, LNG, and CO2 Argon, oxygen, nitrogen and carbon dioxide, methane, hydrogen

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Fodshx Elfepfx Ahmjph Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Leto izdelave: 2006, stanje: skoraj kot novo (rabljeno),

Stanje: novo, Leto izdelave: 2025, MASCHINE IST FABRNEU Die Maschine ist geeignet zum Verpressen von Aluminiumdosen sowie Stahldosen bis zu einer Materialstärke von 0,2 mm und einem Volumen von bis zu 3 Litern. Sämtliche elektrischen und elektronischen Komponenten stammen von den Marken Schneider und Siemens. Die Maschine ist vollautomatisch, ausgestattet mit einer SPS-Steuerung und einem Siemens HMI Simatic Touch-Panel mit Not-Aus-Tastern. Die Maschine unterliegt der Garantie von AYMAS Makina San. Ve Tic. A. S. für ein (1) Jahr oder zweitausendfünfhundert (2.500) Betriebsstunden, je nachdem, was zuerst eintritt. Je nach Einsatzgebiet ist ein Öl-Kühl-/Heizsystem enthalten. Der MB 500 Magnetabscheider und der VH (120-250) Schwingförderer sind optional erhältlich und dienen zur Trennung von Aluminium- und Stahldosen sowie zur Entfernung von Schmutz und Staub aus dem Schrott. Technische Daten: Ballengröße: 500 mm x 330 mm x ... Behälterabmessungen (Breite x Länge x Höhe): 500 mm x 1.000 mm x 330 mm Leistung: Fodpfx Aherc Dkqemeph - Bis zu 1.000 kg/Stunde (Aluminium) - Bis zu 2.000 kg/Stunde (Stahl) Ballengewicht (über mechanische Wägevorrichtung): 10–20 kg Taktzeit: 30 Sekunden Stößelkraft Deckelzylinder: 25 t Stößelkraft Hauptpresszylinder: 100 t Betriebsdruck: 225 bar Maschinenabmessungen (Breite x Länge x Höhe): 1.100 mm x 4.200 mm x 2.600 mm Elektromotor: 18,5 kW Maschinengewicht: 5.000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, CNG trailer for methane-natural gas, 200 bar Manufacturer: SAMRO Year: 1993 Tare weight: 6,900 kg We also offer other tanks for LIN (liquid nitrogen), LOX (liquid oxygen), LAR (liquid argon), LNG (liquefied natural gas), and CO2 (carbon dioxide), as well as argon, oxygen, nitrogen, carbon dioxide, hydrogen, and methane. Fodpfx Ahjt D Aptemoph We would be happy to provide you with a quotation or further information about other pressure vessels. Please contact us by phone or email for more details.

Leto izdelave: 2023, stanje: novo, ! Pasiūlymai tik klientams iš Baltijos šalių: Lietuvos, Latvijos, Estijos. Guillotine RAPIDO – tai greita ir patikima lakštų kirpimo staklės. Priklausomai nuo lakšto ilgio, siūlomi guolotinai su skirtingais darbo ilgiais: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Staklės gali atlikti iki 35 pjūvių per minutę. Pavaros sistema su ekscentrikais, traukėmis ir prispaudimo mechanizmu, kurį galima sumontuoti iki 2,5 cm atstumu nuo peilių, leidžia lengvai ir greitai kirpti siauras juostas. RAPIDO giljotininės žirklės aprūpintos išlyginimo liniuotėmis abiejose pusėse ir LED pjovimo linijos apšvietimu. Galimi darbo ilgiai: 2600 mm / 3200 mm / 4100 mm Fpsdpoixz D Usfx Ahmjh

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HBC 140 2x75kW 2001 (210-008-01), stiskalna sila: 155 t, teža bale: 1.500 kg, pritisk: 250 letvica, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststof ventiel Anti-ratten bekabeling Draaiuren: 0 na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards', inclusief 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de feitelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en opnieuw gelast waar nodig. Dit geldt ten minste voor de volgende onderdelen: • Persplunjer, • Frame, • Perskanaal, • Voorpersklep Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voorpersklep worden deukvrij gemaakt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en alle benodigde reparatie- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en -slangen worden vervangen. De hydraulische componenten worden opnieuw verpakt. De hydrauliekolie wordt vervangen. Fpsdpotvau Asfx Ahmsh Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke plekken. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen door nieuwe. Cilinders: De cilinders worden opnieuw verpakt en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast De schakelkast wordt gecontroleerd en schoongemaakt. Indien nodig worden elektronische componenten vervangen door nieuwe. De PLC en HMI (mens-machine-interface) worden vervangen door de nieuwste Schneider M340-versie, inclusief de meest recente software.

Stanje: dober (rabljeno), Tehnično stanje: dobro Optično stanje: dobro Fpsdpfx Ahet Dlursmjh Za dodatne informacije se obrnite na Ferdinanda Paterja.