22 Kw Kompresor Z Rekuperacijo Toplote nakup rabljenega (73.341)

Leto izdelave: 2020, obratovalne ure: 14.099 h, stanje: zelo dobro (rabljeno), številka stroja/vozila: S0055742, used screw compressor ALMIG BELT XP 22 - 8 bar with Aircontrol Premium controller with integrated heat recovery for heating water Year of manufacture: 2020 Operating hours: 14,099 h Technical data Type: BELT XP 22 Operating overpressure: 8 bar (g) Free air delivery, according to ISO 1217 Annex C: 3.70 m³/min Protection rating / insulation class drive motor: IP 55/ISO F Rated power of drive motor: 22 kW Operating voltage / frequency: 400/50 V/Hz Sound pressure level (DIN 45635 T.13): 74 dB(A) Length: 1,250 mm Width: 880 mm Iiedpfx Aasix Aiyj Uja Height: 1,515 mm Weight: 681 kg Compressed air connection: G 1" Visit our showroom in Erlangen. We always have a large selection of new and used compressors in stock. For new machines, we offer leasing through our house bank with a truly simple process.

Stanje: novo, Leto izdelave: 2024, ♻ Univerzalna uporaba (različno lesovje, palete z žeblji in zatiči, iverne plošče, odpadki in ostanki, furnir, MDF plošče, kartonske škatle, plastika, tekstil itd.) ♻ Sistem drobljenja vključno s transporterjem in magnetnim separatorjem ponuja celovito rešitev za obdelavo materialov in čiščenje. ♻ Sistem sestavljajo zmogljiv drobilnik, ki razgrajuje različne materiale, transporter, ki omogoča enakomerno porazdelitev zdrobljenega materiala in s tem zagotavlja kontinuiran potek nadaljnje obdelave ali odstranjevanja ter magnetni separator, ki učinkovito odstranjuje feromagnetne oziroma magnetne delce iz zmesi, izboljšuje čistost materiala in preprečuje poškodbe opreme. Tehnični podatki: Iedpjtpvdhofx Aa Usia Drobilec: ✔ Moč: 22 kW ✔ Dolžina gredi: 650 mm ✔ Premer gredi: 270 mm ✔ Obratov gredi: 80–120 min⁻¹ ✔ Število rezil: 28 ✔ Granulacija: 10–50 mm ✔ Kapaciteta: do 5 m³/h* ✔ Velikost polnilne odprtine: 1446 x 1342 mm ✔ Teža: 1750 kg Transportni trak v obliki črke Z: ✔ Frekvenčni pretvornik (nastavitev hitrosti transportnega traku) ✔ Nadtrakovni magnetni separator ✔ Dolžina: 6500 mm ✔ Širina: 350 mm ✔ Kapaciteta: 0,5 kg/s ✔ Moč: 0,25 kW ✔ Transportna kolesa 1-letna garancija ali 1000 delovnih ur

Leto izdelave: 2024, stanje: pripravljen za uporabo (rabljen), The heat exchangers are part of the system and were merely ordered separately. The initial purchase price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024, however, this only involved trial runs and not continuous operation. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminium Billets (Used System) Machine type: Modular chamber furnace system with heat recovery Intended use: Homogenization (heat treatment) of aluminium billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks Isdsyt Ihbspfx Aa Usia System Configuration The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Switchgear with PLC control (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). For further information, please refer to the attached PDF.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, GRASSAIR RLR 30 V8 SCREW COMPRESSOR ATLAS COPCO SCREW ELEMENT, VARIABLE SPEED (INVERTER), WITH REFRIGERATION DRYER, 22 KW MOTOR, CAPACITY: 3.90 m³/min, PRESSURE: 10 BAR. Ijdpfxjgfb Hce Aa Usia YEAR: 2006 MACHINE FULLY OPERATIONAL. WE HAVE A LARGER SELECTION OF SCREW COMPRESSORS, DRYERS, AND WELDING EQUIPMENT AVAILABLE FOR SALE.

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), direct drive screw compressor ALMIG GEAR XP 22 - 10 bar (air-cooled) Year: 2022 / AVAILABLE IMMEDIATELY! Technical data Model: GEAR XP 22 Maximum operating pressure: 10 bar (g) Iedpfod Dpvfsx Aa Ujia Free air delivery according to ISO 1217 Annex C: 3.2 m³/min Protection rating / insulation class of drive motor: IP 55 / Class F Rated power of drive motor: 22 kW Operating voltage / frequency: 400V / 50Hz Sound pressure level (DIN 45635 Part 13): 73 dB(A) Length: 1250 mm Width: 880 mm Height: 1515 mm Weight: 670 kg Compressed air connection: G 1" CONVENIENT LEASING AVAILABLE THROUGH OUR PARTNER BANK!

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: MA0173, Immediately available: New KAESER EPC 840-250 lg piston compressor – 10 bar with horizontal, painted 250-litre air receiver equipped with KAESER DRAIN condensate drain (tank drainage) Year of manufacture: 2024 2 cylinders Max. pressure: 10 bar Iiedeityx Tjpfx Aa Uea Rated power: 4.0 kW Free air delivery at 6 bar: 590 l/min Free air delivery at 8 bar: 530 l/min Sound level: 77 dB(A) Compressed air outlet: 1/2" Dimensions (L x W x H): 1590 x 600 x 1140 mm Weight: 165 kg Attractive leasing options available through our partner bank. Visit our showroom. We always have a wide selection of new and used compressors in stock!

Leto izdelave: 2021, obratovalne ure: 2 h, stanje: kot nova (razstavni stroj), številka stroja/vozila: 1007681, Display unit available immediately (Plug and Play): RENNER RS 22 - 10 bar Screw Compressor with RennerTronic Touch Year of manufacture: 2021 Operating hours: 2 h Iisdpokt Nb Rofx Aa Usa Pressure: 10 bar Rated power: 22.0 kW Free air delivery: 3.10 m³/min Sound level: 71 dB(A) Compressed air outlet: 1 1/4" Dimensions (L x W x H): 1287 x 799 x 1296 mm Weight: 547 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Leto izdelave: 2023, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Ex-demo unit, immediately available: New ALMIG BELT XP 22 screw compressor – 10 bar with Aircontrol Basic controller The compressor is in excellent condition but has a visual dent. Year of manufacture: 2023 Operating hours: 1.5 h Technical data Model: BELT XP 22 Operating overpressure: 10 bar (g) Free air delivery, according to ISO 1217 Annex C: 3.34 m³/min Drive motor protection/insulation class: IP 55/ISO F Rated drive motor power: 22 kW Operating voltage / frequency: 400/50 V/Hz Sound pressure level (DIN 45635 T.13): 74 dB(A) Length: 1250 mm Width: 880 mm Height: 1515 mm Weight: 681 kg Compressed air connection: G 1" Visit our store in Erlangen. We always have a wide selection of new and used compressors in stock. For new machines, we offer leasing through our house bank with a very straightforward process. Iodpfx Aslnlt Uoa Usia

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 7 h, Funkcionalnost: popolnoma funkcionalen, Demonstration unit available immediately (Plug and Play): Frequency-controlled RENNER RSF-PRO 7.5 – (10 bar) oil-injected screw compressor Year of manufacture: 2024 Operating hours: 7 h Control system: RENNERtronic Touch (adjustable pressure range from 6 to 10 bar) Pressure: 6 to 10 bar Rated power: 7.5 kW Iodpou Ivyhsfx Aa Uoia Free air delivery: 0.42 to 1.37 m³/min (at 6 bar) 0.41 to 1.30 m³/min (at 7 bar) 0.39 to 1.24 m³/min (at 8 bar) 0.36 to 1.18 m³/min (at 9 bar) 0.33 to 1.09 m³/min (at 10 bar) Sound level: 62 dB(A) Compressed air outlet: G 1/2" Dimensions (L x W x H): 824 x 553 x 1014 mm Weight: 237 kg Attractive leasing options available through our partner bank. Visit our showroom. We always have a wide selection of new and used compressors in stock! Immediately available.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 2 h, Exhibition machine, available immediately: Iijdpstpw I Hjfx Aa Uja New Almig variable screw compressor – 22.0 kW – Model: F-DRIVE 22 Controller: AIR CONTROL PREMIUM Year of manufacture: 2024 Operating hours: 2 h Technical Data Model: F-DRIVE 22 Available operating pressure (infinitely adjustable): 5 – 13 bar Free air delivery at minimum / maximum speed, measured in accordance with ISO 1217 Annex C: - at 5 bar (g): 0.44 to 4.14 m³/min - at 6 bar (g): 0.43 to 4.12 m³/min - at 7 bar (g): 0.42 to 4.11 m³/min - at 8 bar (g): 0.50 to 3.89 m³/min - at 9 bar (g): 0.58 to 3.66 m³/min - at 10 bar (g): 0.67 to 3.47 m³/min - at 11 bar (g): 0.75 to 3.26 m³/min - at 12 bar (g): 0.85 to 3.02 m³/min - at 13 bar (g): 0.94 to 2.79 m³/min Installed motor power: 22.0 kW Drive motor enclosure / insulation class: IP55 / Class F Operating voltage / frequency: 400 V / 50 Hz Compressed air connection: 1" G Dimensions and Weight: Length (mm): 790 Width (mm): 800 Height (mm): 1757 Weight (kg): 536 kg Visit our premises in Erlangen – we always have a large selection of new and used screw compressors in stock.

Stanje: rabljeno, adjustable geared motor, variable speed geared motor, electric motor - Gearbox manufacturer: SEW Type: R40 - Motor manufacturer: SEW Type: DF12DT71D-4 - Motor power: 0.37 kW - Speed range: 22–110 rpm - Motor: variable speed - Shaft center height: 90 mm - Drive shaft: Ø 25 mm - Mounting design: B3 Iedjc I Rk Tepfx Aa Usia - Quantity: 1 unit available - Price: per unit - Dimensions: 590 x 280 x H165 mm - Weight: 28 kg

Leto izdelave: 2018, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ponujamo to uporabljeno Wolf WK-com N-W B127 prezračevalno napravo z rekuperacijo toplote in hlajenjem Panasonic, letnik 2018. Nazivni volumenski pretok (20 °C): 7 500 m³/h Nazivni volumenski pretok (20 °C): 2,08 m³/s Skupni padec tlaka (ges. Δp stat.): 721 Pa Zunanji padec tlaka (ext. Δp stat.): 400 Pa Učinkovitost sistema η: 67,0 % Hitrost ventilatorja pri delovni točki nᵥ: 1 357 1/min Maksimalna hitrost ventilatorja nᵥ max: 1 550 1/min Tok pri delovni točki Iᵦ: 3,4 A Razlika tlaka na šobi Δp Dü: 593 Pa Kalibracijski faktor k: 308 Nazivna moč motorja Pₙ: 3,4 kW Nazivni tok motorja Iₙ: 5,4 - 4,2 A Nazivna napetost Uₙ: 3~380..480/50 V/Hz Isdoyir Nzopfx Aa Ueia Krmilna napetost delovne točke: 8,8 VDC Če imate vprašanja ali želite več informacij, nam pošljite sporočilo ali nas pokličite.

Leto izdelave: 1989, stanje: zelo dobro (rabljeno), CREEMERS SCREW COMPRESSOR 22 KW 22 kW MOTOR POWER CAPACITY: 3.0 m³/min, PRESSURE: 10 BAR, OPERATING HOURS: 12,600 h MACHINE IN FULLY OPERATIONAL CONDITION, NET PRICE: 6,300, GROSS PRICE: 7,749, Iiodpfx Aaof Nd D Re Uea I HAVE A LARGER SELECTION OF SCREW COMPRESSORS AND WELDING EQUIPMENT AVAILABLE.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + special rotor, designed with reduced knife protrusion for processing both hard and soft materials + 22 kW motor + effective square knives *For pallets: up to a maximum of 10 pallets per hour (output depends on screen and material). Significantly higher throughput possible for smaller wood residue. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *interchangeable Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Colour of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC controller - Automatic star/delta start - High-speed hydraulics - Automatic stop when rotor idles - 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing incremental control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled discharge conveyor (discharge height approx. 220 cm) + €12,980 net - Over-belt magnet + €5,980 net Ijdpfjx Af Rdjx Aa Usia - Control for conveyor and over-belt magnet + €2,750 net (Start/stop synchronised with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral contaminants. Damage to the tools and/or increased wear may result otherwise.

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 55 h, Showroom unit immediately available: Kaeser SK 25 T - 8 bar screw compressor with integrated refrigeration dryer with electronically level-controlled condensate drain with Sigma Control 2 controller Year of manufacture: 2024 Operating hours: 55 h Pressure: 8 bar Rated power: 15 kW Free air delivery: 2.52 m³/min Ijdpfx Aajunliqj Usia Sound level: 67 dB(A) Compressed air outlet: 1" Dimensions (L x W x H): 750 x 1240 x 1260 mm Weight: 395 kg Attractive leasing options for new machines available through our in-house bank. Visit our showroom. We always have a large selection of new and used compressors in stock!

Stanje: novo, Leto izdelave: 2025, Showroom model available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated refrigeration dryer Pressure: 10 bar Rated power: 15 kW Iiodpfxedrc Txo Aa Uoa Free air delivery: 2.11 m³/min Sound level: 67 dB(A) Compressed air outlet: 1" Dimensions (L x W x H): 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 h Convenient leasing options for new machines available through our in-house bank. Visit our store. We always have a large selection of new and used compressors in stock!

Leto izdelave: 2021, obratovalne ure: 0 h, stanje: novo, Screw Compressor ALMIG BELT 11 XP 270 - 10 bar (air-cooled) with integrated refrigeration dryer with time-controlled condensate drain with pre- and after-filter with galvanized 270-liter tank with AirControl BASIC control system Year: 2021 / new & immediately available Shipping available for an additional charge! Technical Data Type: BELT 11 XP 270 Operating overpressure: 10 bar(g) Free air delivery, according to ISO 1217 Annex C: 1.49 m³/min Protection class / insulation class drive motor: IP 55/ISO F Rated power drive motor: 11 kW Operating voltage / frequency: 400/50 V/Hz Iedjg N Ti Tjpfx Aa Ujia Sound pressure level (DIN 45635 T.13): 67 dB(A) Length: 1320 mm Width: 695 mm Height: 1898 mm Weight: 458 kg Compressed air connection: G 3/4" Convenient leasing available through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock! Immediately available.

Stanje: novo, Ponujam popolnoma nov Siemens SIMOTICS motor (serija 1FE) – profesionalni servo / vretenasti motor, namenjen delu z frekvenčnim pretvornikom (inverter duty). Gre za vrhunsko industrijsko enoto, ki se uporablja v CNC obdelovalnih strojih in zagotavlja veliko moč, natančnost in zanesljivost. Motor je iz skladiščne zaloge (NOS) – nikoli ni bil uporabljen, shranjen je bil v originalni Siemens embalaži. Iiodpfx Aaoyxqmxo Uja ⚙️ Tehnični podatki Proizvajalec: Siemens Serija: SIMOTICS Model: 1FE1114-6WW11-1BN2-Z-T56 Moč: 20,9 – 26,8 kW Napetost: 425 V Tok: 58 / 85 A Nazivno število obratov: 1000 vrt/min Maksimalno število obratov: 6000 vrt/min Maksimalni navor: 330 Nm Način delovanja: S1 / S6-40% Hlajenje: vodno Senzor za temperaturo: KTY84-130 Stopnja zaščite: IP00 Izolacijski razred: F (155°C) 📦 Komplet vsebuje Siemens SIMOTICS motor Originalna Siemens embalaža (kot na slikah) 📌 Ključne prednosti ✔️ Stanje: NOVO (iz skladišča / NOS) ✔️ Izdelano v Nemčiji ✔️ Siemens industrijska kakovost ✔️ Idealno za CNC / obdelovalne stroje / avtomatizacijo ✔️ Visoka moč in navor

Stanje: novo, Ponujam Siemens sinhrone motorje v izvedbah: Isdpoyxdw Dsfx Aa Ueia 👉 1FE1093-6WV11-1BZ2-Z 👉 1FE1093-6WV1 Visokokakovostne vgrajene industrijske enote, namenjene za CNC obdelovalne stroje in precizne pogonske sisteme. Stanje: novo / skladiščno (NOS) ⚙️ Tehnični podatki: Proizvajalec: Siemens Tip: sinhroni motor (vgrajen / vreteno motor) Napetost: 425 V Največja hitrost: do 7000 obr./min Hlajenje: vodno Tipalo temperature: KTY84-130 Način delovanja: S1 / S6 Stopnja zaščite: IP00 Država proizvodnje: Nemčija 📊 Dodatni podatki (za verzijo 1FE1093-6WV11-1BZ2-Z): Moč: 16,8 – 21,5 kW Tok: 43,0 / 60,0 A Maksimalni navor: 165 Nm 📦 V kompletu: stator rotor Siemens dokumentacija

Leto izdelave: 2009, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 unit liquid ring vacuum pump. Please read the description carefully all the way to the end!! The pump is not suitable for: Water, the food industry, and non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are better suited. Attention!! The pump does not have explosion protection certificates. It is also not possible to replace the motor, as it uses a special long-shaft motor. The mechanical seal also does not have EX certificates! The pump is made from the special alloy Alloy 59!! This alloy is used when conventional chrome-nickel steels are no longer sufficiently corrosion-resistant. Particularly when chloride-induced pitting and crevice corrosion, as well as stress corrosion cracking, are a concern. Alloy 59 is used for: environmental technology, the chemical industry (chemical processes with oxidizing and reducing acids, resistance to moist chlorine gas), and waste incineration plants. Alloy 2.4605 is mainly used in the chemical industry, pulp and paper industry, as well as in flue gas desulphurization units. Outstanding resistance to mineral acids such as nitric, phosphoric, sulfuric, and hydrochloric acid, and especially to sulfuric/hydrochloric acid mixtures. Typical applications include: - Plant components for processes in organic chemistry with chloride-containing media, especially where chloride-based catalysts are used - Multipurpose plants in the chemical industry - Plant components in the fine chemicals and pharmaceutical industries - Scrubbers, heat exchangers, dampers, fans, and agitators for flue gas desulphurization units (FGD) in fossil-fuelled power plants and waste incineration plants - SO2 scrubbers for marine diesel engines - Components for seawater and concentrated brines - Equipment and components for geothermal and sour gas applications - Reactors for acetic acid and acetic anhydride - Reactors for hydrofluoric acid - Sulfuric acid coolers - Piping in geothermal power plants Ijdpfx Aasigqutj Uoia - Components in flue gas desulphurization units Manufacturer: Busch Model: LC 0220 A ZZO XX ZZ Volumetric flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 Volt Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings new, mechanical seal refurbished by a specialist. Weight: 121 kg Dimensions: Length 960mm, Width 370mm, Height 370mm Connection: DN 50 (2")

Stanje: zelo dobro (rabljeno), Naprodaj industrijski električni motor z elektromagnetno DC zavoro. Kompletna pogonska enota, uporabljena v industrijskih strojih, mostnih žerjavih, vitlih, transporterjih ter drugih napravah, kjer je potrebno zaustaviti gred po izklopu napajanja. Motor je odstranjen iz industrijskega stroja. Zunanji videz zelo dober – normalne sledi uporabe, tehnično brezhiben. Elektromagnetna zavora omogoča takojšnjo zaustavitev in blokado gredi, kar je pogosto uporabljeno v pogonih z visoko stopnjo varnosti. Tehnični podatki: proizvajalec motorja: Cantoni tip motorja: 3-fazni moč: 5,5 kW napetost: 400 V frekvenca: 50 Hz število obratov: pribl. 950 obr/min stopnja zaščite: IP55 izolacijski razred: F zavora: enosmerni tok (DC) Iedpfsyridbox Aa Usia zavorni moment: 150 Nm napajanje zavore: 180 V / 75 W leto izdelave: 2018 proizvedeno v EU NAVEDENA CENA ZA 1 KOS.

Stanje: dober (rabljeno), Leto izdelave: 2013, skupna masa: 560 kg, Tehnični podatki črpalke: • Proizvajalec: KSB • Tip: ETIC D 65 / 45-1 • Zmogljivost: Q = 45 m³/h • Dvižna višina: H = 182,19 m • Leto izdelave: 2013 • Priključki z prirobnicami (vizualno DN150 – v skladu s fotografijami) • Robustna, industrijska konstrukcija • Črpalka odstranjena iz industrijske inštalacije Elektromotor: • Proizvajalec: Siemens • Moč: 37 kW • Napajanje: 3-fazno Iijdpfeydv I Dsx Aa Uoa • Obrati: cca 2950 obr./min (50 Hz) • Industrijska izvedba, hlajenje IC411 • Montaža: IM B3 • Motor nameščen na okvirju s črpalko Stanje: • Tehnično stanje: rabljeno • Vizualno običajni znaki uporabe, brez razpok in poškodb ohišja • Gredi in prirobnice popolne (vidno na fotografijah) • Prodaja kot komplet: črpalka + motor + okvir Dodatne informacije: • Idealno za industrijsko uporabo: tehnološke inštalacije, energetika, kemija, procesna voda • Cena velja za 1 kos.

Stanje: rabljeno, Leto izdelave: 2015, Reciklačni sistem za pridobivanje in ločevanje plastike ter gumijastih izdelkov od tekstilnih ojačitev, kot so različne vrste gumijastih cevi, PVC, ponjave, transparenti in drugi plastični materiali s tekstilno ojačitvijo. Sistem deluje v povezavi z granulatorjem in separacijskim sistemom. Ura proizvodnje: 50 - 80 kg/h Dimenzije odprtine za dovod: 270 x 120 mm + Ø80 mm Dolžina rezil: 3x2 + 2x2 Premer rotorja: 250 mm Dolžina reza: 600 mm Moč motorja: 22 kW Dimenzije: 3200 x 3000 mm Višina: 2500 mm Iedpfx Aswpkw Esa Usia Teža: 1000 kg Leto proizvodnje: 2015 Tehnično stanje: rabljeni stroj, vsi motorji delujoči. Manjka zgornji pokrov za nalaganje izdelka z dimenzijami: 400x300 mm. Na voljo je popolna in originalna tehnična dokumentacija.

Stanje: zelo dobro (rabljeno), • Proizvajalec: ABUS KG – Nemčija • Tip: K-300 1-4 • Moč motorja: 3,8 kW • Napajanje: 400 V / 50 Hz • Opremljen z elektromagnetno zavoro – zavorni moment 90 Nm • Zobati gred – premer cca 34 mm • Pritrditev: kvadratni prirobnik • Robustna industrijska zasnova, namenjena delu v ABUS mostnih žerjavih in vitlih • Stanje: rabljen, delujoč (prave slike) Iodsxbfutopfx Aa Ujia

Stanje: rabljeno, obratovalne ure: 48.000 h, Manufacturer: Alup Motor: 22 kW Output: 3.9 m³/min Loaded operating hours: 48,000 h Isdpfeur N Tbsx Aa Ujia