Rezervoar sušilnega stroja z vijačnim kompresorjem 11 kW

ALMIG BELT XP-RD 11 / 270 (10 bar)

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Feeding chamber dimensions: 280x580 mm, loading height: 700 mm, maximum load: 300 kg, equipped with safety enclosure and documentation. The machine was fully operational until recently; however, a complete maintenance service is required. Inspection is possible. Dcedpfoqgfbgox Afnjd

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Dcjdpjgwbbqofx Afnsd Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 36.000 mm, Ironing dryer, working width 4,600 mm, length 22,000 mm, of which 10,000 mm with press rollers, separate pressing/cooling section, heating medium: hot water, semi-automatic feeding device, type BFT46 and lift table, max. veneer length: 4,600 mm, roller width: 600 mm, total length: 36,000 mm, 11 fans, PLC control system renewed in 2017. Dodpfxsv Hygfe Afnscd A second ironing dryer of similar design is available.

Stanje: pripravljen za uporabo (rabljen), Tehnične značilnosti Prostornina: 12 m³ Uporabne dimenzije: Dolžina: 7.400 mm Širina: 1.500 mm Višina: 1.350 mm Zunanje dimenzije: 8.400 mm x 2.700 mm 28 krožnih grelnih plošč (dimenzije 6.400 mm x 700 mm) Dcedpfxet Hzvke Afned Popolnoma obnovljeno Nova vakuumska črpalka 5,5 kW (TRAVIANNI) Moč in motorji Skupne dimenzije

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Postelja za varjenje visoke trdnosti Razdeljen sistem za odvod dima Popolnoma avtomatski sistem za vbrizgavanje maziva Dcsdjw A Iiljpfx Afned Popolnoma avtomatsko rezanje, varčevanje z materialom, velika hitrost Območje rezanja: 4000 × 2000 mm Pomik po osi X: 1520 mm Pomik po osi Y: 4020 mm Pomik po osi Z: 80 mm Maks. kombinirana pozicijska hitrost: 170 m/min Pospešek: 2,8 G Dimenzije stroja (D × Š × V): 9500 × 2900 × 2380 mm Tloris: 10500 × 3400 mm Neto teža: 8500 kg

Stanje: rabljeno, številka stroja/vozila: 006253, Type of applied edge: thin edge, thick edge, solid wood Glue application system: EVA, PUR Jointing cutters: yes Multi-function unit: yes Maximum feed speed: 40 m/min Maximum panel thickness: 60 mm Dodsl Txxgopfx Afnscd Working units: 10 pcs

Stanje: dober (rabljeno), Leto izdelave: 2014, moč: 14,8 kW (20,12 KM), volumenski pretok: 1,63 m³/h, tlak (maks.): 7,75 letvica, Kompresor zraka Atlas Copco SF 15 FF Proizvajalec: Atlas Copco Tip: SF 15 FF Leto izdelave: 2014 Največji tlak: 7,75 bar Pretok: 4,95 m³/min Volumenski pretok: 27,1 l/s, 1,63 m³/min Moč motorja: 14,8 kW = 20 KM Hitrost motorja: 2885 o/min Teža: 595 kg Napajanje: 400 V, 50 Hz, 3 faze Zasnova: brez olja ISO razred: 8573-1 razred 0 Oprema: integriran Workplace Air System™, opremljen s SMARTLINK Krmiljenje: Elektronikon Izvor: Izdelano v Belgiji Dcedsxk U Dcjpfx Afnsd Za pravilnost, popolnost in ažurnost podatkov ne prevzemamo odgovornosti.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Horizontal thin-cut band saw with 3 heads 300 mm working width Dodpfx Aevwbg Usfnscd Capable of cutting up to 4 lamellae in a single pass New 2024 model with larger wheels Touchscreen and Schneider PLC 970 mm wheels for higher cutting speed Frequency inverter on the wheels for adjustable cutting speed. For lamellae starting from 2 mm thick

Stanje: rabljeno, Leto izdelave: 2018, max. workpiece length 4200 mm Milling spindle: 1 unit Main motor: 15 kW HOMAG CNC machining center BMG310/42/F/K, year 2018 ----- The machine is part of the sale of an entire window manufacturing operation. See stock number 1305-6979. The machines are still connected and ready for demonstration. Technical short summary: ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Overhead laser Dcodpoyn R Iaefx Afnod - Working dimensions: 4200 mm length, 1350 mm depth - 32-position disc tool changer - 8-position linear tool changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for PowerCLamp clamps, 8 pcs - approx. 30 vacuum clamps - 4 x PowerCLamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for box-type window frames For a detailed description refer to the attached PDF document! ----- Price on request! Optional items (subject to surcharge): ----- - Used Leitz tools for Homag with round arch production, suitable for SCM Windor 40 R systems #1305-6993. Price: €12,000 - Barbaric vacuum lifter, year 2015. Price: €4,500 - Used Löwer Minizinkepresse MZP 1 for round arch production. Price: €1,000 (Technical data according to manufacturer, without guarantee!)

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Ta industrijska proizvodna linija HOMAG WEEKE je bila izdelana leta 2007. Ima celovito postavitev za obsežno obdelavo plošč in lepljenje robov, vključno z avtomatskimi nakladalnimi sistemi, centralnim valjčnim transporterjem, več moduli za lepljenje robov ter portalnim manipulatorjem za zlaganje. Idealna za optimizirano lesno proizvodnjo, zagotavlja učinkovito rokovanje in natančnost. Razmislite o priložnosti za nakup te industrijske linije HOMAG WEEKE. Kontaktirajte nas za več informacij o tem stroju. Dedpfxex D Dq Ss Afnscd Vrste uporabe Kompletna proizvodnja