Unic Urw 295 nakup rabljenega (1.011)

Stanje: pripravljen za uporabo (rabljen), Baldor BSC1005-24-HR servo pogon VHOD 320VDC ID/št.: 21137B Serijska številka: 1295MG24824, rabljen, dobro ohranjen, 100% delujoč, dobava v skladu s fotografijami. Godpfjy Npy Sjx Aa Ueiu

Stanje: pripravljen za uporabo (rabljen), Heidenhain BC 120 monitor enota 15" TFT SN: 30938147, sestavljena iz dodatne tipkovnice Heidenhain 329 506-01 in industrijskega monitorja Viscotech SEM15-F-BC120-FP za TNC426, TNC430 / BC120, BC120F, rabljeno, dobro ohranjeno, 100% delujoče, dobava po slikah. Gsdpfxoy Nqdfs Aa Ueiu

Stanje: novo, Siemens 6GK5216-0BA00-2AA3 XC216 upravljalni IE stikalnik plasti 2, E-Stopnja: 15, SN: VPP4192955, neuporabljen v originalni embalaži, 100% delujoč, obseg dobave kot na fotografijah. Godjx Euwuopfx Aa Ueiu

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical specifications: Gedpfxsk Eakvs Aa Ujiu - 230 V - 0.7 A - 50 Hertz - IP65

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Model: Unicon-D 2000/400/450/100 Year of manufacture: 2015 Electrical data: Gjdpfx Ajlatz Doa Usiu - 230 V - 0.7 A - 50 Hertz - IP65 Dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Stanje: nepreverjeno (rabljeno), Slotted spindle, 2 pcs. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control system: Weinig, PC-Nexus Weinig Unicontrol 10 NC window production line, optionally with extensive tooling ----- Optionally available (with additional surcharge): IV 68 wood, wood/aluminium IV 78 wood, wood/aluminium IV 68 entrance doors Technical manufacturer's description: ----- Pos. 1: Weinig Unicontrol 10 NC window production line ----- Cross-cut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake, 3,000–6,000 rpm. Maximum tool diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically to 8 positions for edge rounding from above Horizontal rounding unit, bottom ----- Axial adjustment mechanically coupled to cross-cut saw 1st tenon and slot spindle ----- Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 640 mm Axial adjustment via NC axis Home position below table: 5–10 mm Radial adjustment: fixed 2nd tenon and slot spindle ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 320 mm Axial adjustment via NC axis Radial adjustment via NC axis Home position below table: 5–10 mm 1st profile spindle (climb and counter climb) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm Gijdpfx Ajzawizoa Uou 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm Horizontal top profile milling unit ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Maximum tool diameter: 130 mm Adjustment pneumatically to 8 axial and radial positions 3rd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm Vertical profile milling unit right, machine end ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Maximum tool diameter: 210 mm Adjustment pneumatically to 8 axial and radial positions Further accessories -----...

Stanje: rabljeno, Manufacturer: Honeywell Braukmann Type: R295 SA Installation Type: 2 Gjdpfx Aedc A R Roa Ujiu

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled cross-cut saw with laser switching from saw cutting to zero-clearance wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor 3. Longitudinal/profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd elevating spindle) D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and slotting spindle on the right side, 3 kW motor Fitting spindle 40 x 150 mm, 3 kW motor Adjustable feed rate 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop 3600 mm Return of workpiece via automatic rotary system Automation package Interval-controlled sash support Gijdpfx Aaoxmr N Io Usu Double parts package Laminated fabric worktables (for sanded surfaces) Left-side pressure guide, max. wood width difference 100 mm Machine in very good technical and visual condition

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Rezalna vretena 2 kosa Število rezkalnih enot: 7 kosov Premer vretena: 50 mm Krmiljenje: Weinig PC-Nexus # 6726 Weinig Unicontrol 12 CNC ----- Prodaja po naročilu stranke. Stroj je priključen in možno ga je demonstrirati. Vključno z rabljenimi okenskimi orodji za Unicontrol 12, Gisdpjyyqm Isfx Aa Ueu OERTLI za različne debeline lesa ----- Kratek povzetek: ----- - 2 rezalni vreteni, vsaka dolžine 640 mm, CNC krmiljena - Variotiško - 3 x profilna vretena, vsaka dolžine 400 mm, CNC krmiljena - Opremljevalno vreteno + rezkalni agregati zgoraj in spodaj - vključno z rabljenimi okenskimi orodji za Unicontrol 12, OERTLI za različne debeline lesa in sistemi programirani ter uvedeni (glej priložen PDF) Podroben opis: ----- Prečna žaga ----- Prečna žaga elektronska, vodoravno brezstopenjsko nastavljiva Število orodij: 1 kos Hitrost vretena: 3000-6000 min⁻¹ Premer vretena: 40 mm Maksimalni premer orodja: 400 mm Moč motorja: 3 kW Laserska linija za določanje rezalnega odseka Zaoblitvena enota ----- Položaj: vodoravno spodaj Moč motorja: 1 kW Premer vretena: 20 mm Hitrost vretena: 9000 min⁻¹ Maksimalni krožni premer orodja: 130 mm elektronski dolžinski prislon, dolžina: 3500 mm ----- 1. čepljenje in rezalno vreteno ----- Število orodij: spremenljivo, CNC-krmiljeno Dolžina vpenjanja orodja: 640 mm Vertikalni hod vretena: spremenljiv, CNC-krmiljen Hitrost vretena: 2800-4000 min⁻¹ Premer vretena: 50 mm Maksimalni premer orodja: 380 mm Moč motorja: 15 kW 2. čepljenje in rezalno vreteno ----- Število orodij: spremenljivo, CNC-krmiljeno Dolžina vpenjanja orodja: 640 mm Vertikalni hod vretena: spremenljiv, CNC-krmiljen Hitrost vretena: 2800-4000 min⁻¹ Premer vretena: 50 mm Maksimalni premer orodja: 380 mm Moč motorja: 15 kW 1. profilno vreteno ----- Položaj: navpično desno Število orodij: spremenljivo, CNC-krmiljeno Dolžina vpenjanja orodja: 400 mm z zgornjim ležajem Vertikalni hod vretena: spremenljiv, CNC-krmiljen Horizontalni hod vretena: spremenljiv, CNC-krmiljen Hitrost vretena: 6000 min⁻¹ Premer vretena: 50 mm Maksimalni krožni premer orodja: 232 mm Moč motorja: 11 kW 2. profilno vreteno ----- Položaj: navpično desno Število orodij: spremenljivo, CNC-krmiljeno Dolžina vpenjanja orodja: 400 mm z zgornjim ležajem Vertikalni hod vretena: spremenljiv, CNC-krmiljen Horizontalni hod vretena: spremenljiv, CNC-krmiljen Hitrost vretena: 6000 min⁻¹ Premer vretena: 50 mm Maksimalni krožni premer orodja: 232 mm Moč motorja: 11 kW 3. profilno vreteno ----- ...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 29.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 231000, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, razmak između stupova: 570 mm, delovna prostornina: 474 cm³, tlak vbrizgavanja: 2.000 letvica, injekcijska masa: 434 g, hod izmetalca: 225 mm, skupna masa: 7.450 kg, Oprema: dokumentacija / priročnik, Tukaj kot trgovec s stroji za brizganje plastike ponujamo naslednji lepo vzdrževani rabljeni stroj za brizganje plastike. Seveda se ukvarjamo tudi z odkupom dobro vzdrževanih strojev za brizganje plastike, letnik 2010 ali novejših. Smo veletrgovec z rabljenimi stroji za brizganje plastike že več kot 25 let. Zaradi trenutne situacije – davčni nasvet in prednost za rabljene stroje: Od 1. 7. 2025 bo mogoče tudi rabljene stroje davčno upoštevati s posebnim 30-% letnim amortizacijskim odbitkom. Proizvajalec: Arburg Gjdpfx Aaew Tt R Is Ujiu Tip: 570C 2000-800 GE Serijska številka: bo še posredovana Letnik: 2015 Delovne ure: približno 29.500 h Številka stroja: 231000 Krmiljenje: Selogica Dimenzije D/Š/V: 5,53 x 1,80 x 2,20 m Teža: 7.450 kg Deluje brezhibno Stanje: zelo dobro ohranjen – Nemško poreklo – iz prve roke Ekstra oprema 2x vlečenje jeder Termoplastični valj popoln 55 mm, visoka odpornost proti obrabi Obdelava termoplastov Odprta šoba 55 mm Komplet vpenjalnih plošč 570 centralni, 125 mm Izbirna enota: - razširjena grafika - razširjeno varovanje orodja - razširjeni premiki - razširjeno zapiranje - upravljanje proizvodnje - menjavanje naročil Popolna dokumentacija – elektro načrti ipd. Brizgalna enota: Polž ⌀ 55 mm Teža brizga 434 g/PS Vbrizgalni tlak 1650 bar Volumen vbrizga 474 ccm Zapiralna enota: Zapiralna sila 200 t / 2000 kN Razmak vodil: 570 x 570 mm Vpenjalne plošče: 795 x 795 mm Višina vgradnje orodja: 300 mm Maks. razdalja plošč: 950 mm Hod odpiranja: 650 mm Izmetna pot/moč: 225 mm / 66 kN Hidravlično zapiranje Moč motorja: 22 kW Ogrevanje: 19,9 kW / 8 grelnih con Skupna priključna moč: 45 kW Vidne periferne naprave niso vključene v obseg dobave. Stroj je takoj na voljo v našem skladišču v Hannovru/Nemčija in je bil preizkušen. Garancija Garancija do prvega zagona. Natovarjanje/pošiljanje Brezplačno naloženo na tovornjak kupca ali dostavljeno na naslov proti povračilu stroškov prevoza – možna svetovna dobava. Na voljo iz našega skladišča v Hannovru/Nemčija. Informacije o naših strojih in podjetju: - prodajamo samo lastne stroje, odkupljene iz tekoče proizvodnje, iz našega skladišča Hannover - vsi stroji so pred demontažo pregledani in preizkušeni - ne prodajamo stečajnega blaga – nismo posredniki, ki trgujejo s tujim premoženjem - vsi ponujeni stroji izvirajo iz uspešnih podjetij, pri katerih sta vzdrževanje in skrb za stroje samoumevna - vsi stroji so na ogled v našem skladišču

Stanje: nepreverjeno (rabljeno), Schlitrska vretena 1 kos. Število rezkalnih enot 5 kos. Premer vretena 50 mm Krmiljenje Weinig PC-Nexus Weinig Unicontrol 11 linija za izdelavo oken z obsežnim kompletom orodij ----- Opcijsko na voljo (z dodatnim doplačilom) - Weinig Univar 6 stroj za prekrivanje spojev (cena na zahtevo!) - Götzinger PowerDrill vrtalni in rezkalni center za okna in vrata (cena na zahtevo) Tehnični opis proizvajalca: ----- Poz. 1: Weinig Unicontrol 11 linija za izdelavo oken ----- vključno z obstoječimi orodji - IV 67 les in les-alu - IV 77 les in les-alu - IV 90 les Krožna žaga za dolžinsko rezanje ----- s svetlobnim laserjem za poravnavo, moč motorja 3 kW, premer vretena 40 mm, hitrost vrtenja vretena elektronsko nastavljiva z zavoro 3.000–6.000 min⁻¹. Največji premer kroženja orodja 400 mm Premik v osi: 150 mm preko NC-osi Radialni pomik pnevmatski na 8 položajev za zaokroževanje robov od zgoraj Enota za zaokroževanje horizontalno spodaj ----- Motor z zavoro: 1,5 kW, premer vretena 20 mm, vpenjalna dolžina 25 mm, hitrost vrtenja 9.000 min⁻¹ Največji premer kroženja orodja 130 mm Osi premika mehansko povezane z žago za dolžinsko rezanje Radialni pomik pnevmatsko upravljan Čepilna in utorna vretena ----- S hidravlično vpetim nasprotnim ležajem Moč motorja z zavoro: 15 kW Premer vretena 50 mm Hitrost vrtenja vretena 2.800 min⁻¹ Največji premer kroženja orodja 400 mm Dolžina vpetja orodja 640 mm Premik v osi: NC-os Osnovni položaj pod mizo: 5–10 mm Radialni hod: fiksno 1. profilno vreteno (vzporedni in nasprotni tek) ----- Moč motorja z zavoro 11 kW Premer vretena 50 mm Hitrost vrtenja vretena 6.000 min⁻¹ Premer kroženja orodja min. 140 mm, max. 232 mm Dolžina vpetja orodja 400 mm z nasprotnim ležajem Premik v osi 350 mm NC-os Radialni pomik NC-os Osnovni položaj pod mizo: 5–10 mm 2 podajalni valji nasproti vretenu, aksialno pnevmatsko upravljani v 8 položajih Profilna rezkalna enota horizontalno zgoraj ----- Moč motorja z zavoro 3,7 kW Premer vretena 40 mm Vpenjalna dolžina 40 mm Hitrost vrtenja vretena 9.000 min⁻¹ Največji premer kroženja orodja 130 mm Nastavitev pnevmatska na 8 položajev aksialno in radialno 2. profilno vreteno ----- Moč motorja 11 kW Premer vretena 50 mm Hitrost vrtenja vretena 6.000 min⁻¹ Premer kroženja orodja min. 140 mm, max. 232 mm Dolžina vpetja orodja 400 mm z nasprotnim ležajem Premik v osi 350 mm NC-os Radialni pomik NC-os Osnovni položaj pod mizo: 5–10 mm Sinhronizirano vodilno ravnilo v prislonu z letvijo za podporo križev 2 podajalni valji nasproti vretenu, aksialno pnevmatsko upravljani v 8 položajih Profilna rezkalna enota vertikalno desno na koncu stroja ----- Moč motorja z zavoro 3,7 kW Premer vretena 40 mm Giodpfey T R Tuex Aa Usu Vpenjalna dolžina 160 mm Hitrost vrtenja vretena 5.850 min⁻¹ Premer kroženja orodja min. 112 mm, max. 210 mm Pnevmatska nastavitev na 8 položajev aksialno in radialno Profilna rezkalna enota horizontalno spodaj ----- Moč motorja z zavoro 3 kW Premer vretena 40 mm Vpenjalna dolžina 125 mm ...

Stanje: delavnici obnovljeno (rabljeno), Keyway Spindle 1 pc. Number of Milling Units: 5 pcs. Gsdpfx Aevu Hghja Ueiu Spindle Diameter: 50 mm Control System: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC Spindles Machine is cleaned and fully inspected prior to delivery Technical Data Summary (Please enquire about any additional included accessories) Pos. 1: Cross-Cut Saw ----- > Number of Tools: 1 pc. > Spindle Speed: 2,800 rpm > Spindle Diameter: 40 mm > Max. Tool Diameter: 400 mm > Motor Power: 3 kW > Radial Adjustment pneumatically controlled across 8 positions, e.g., for top edge rounding > Laser Guidance for cutting section detection Pos. 2: Rounding Unit, Horizontal Lower ----- > Position: horizontal, lower > Motor Power: 1.5 kW > Spindle Diameter: 20 mm > Clamping Length: 25 mm > Spindle Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment mechanically linked with cross-cut saw > Radial Adjustment pneumatically controlled, on/off NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and Keyway Spindle ----- > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 3,500 rpm > Max. Cutting Circle: 320 mm > Spindle Diameter: 50 mm > Max. Tool Diameter: 320 mm > Motor Power: 11 kW Pos. 4: 1st Profiling Spindle (Climb and Conventional Milling) ----- > Position: vertical, right > Number of Tools: 1 pc. > Tool Clamping Length: 120 mm > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical, right > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 11 kW 2 Feed Rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash Bar Guide consisting of: Guide rail at the stop (climb milling section), Sash bar support rail from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 6: Profiling Milling Unit, Horizontal Upper ----- > Clamping Length: 40 mm > Spindle Diameter: 40 mm > Motor Power: 3.0 kW > Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment: 30 mm, 8 positions > Radial Adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right > Tool Clamping Length: 160 mm > Axial Adjustment: 115 mm, 8 positions > Radial Adjustment: 110 mm, 8-position turret > Spindle Speed: 5,850 rpm > Spindle Diameter: 40 mm > Max. Cutting Circle: 210 mm > Motor Power: 3.0 kW Pos. 8: Profile Milling/Grooving Unit, Bottom ----- > Motor Power: 3.0 kW > Tool Clamping Length: 125 mm > ...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Prodajam pretočno CNC vrtalno napravo HIRZT Imaco Unica F12, letnik 2018. Nova stroj iz razstavnega salona! Konfiguracija: Rezkalni motor 2,2 kW / 18.000 obr/min Gijdpjy U Eluefx Aa Uou 12 + 4 + 4 vrtalna vretena 1 utorni žaga Povratno podajanje, ki elemente vrača nazaj do upravljavca ali nazaj kot pretočni stroj. Maks. delovna širina: 1200 mm Maks. višina elementa: 40 mm Skupna velikost: 2600 x 1300 mm Skupna teža: 1650 kg. Z vso dokumentacijo in CE. Orodja vključena in programirana. V zelo dobrem stanju. Na voljo takoj.

Stanje: rabljeno, največja dovoljena obremenitev: 29.700 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 9.920 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.250 mm, prostornina tovornega prostora: 55 m³, skupna širina: 2.550 mm, skupna višina: 3.945 mm, Leto izdelave: 2025, Oprema: ABS, Wielton aluminium box tipper, 55 m³ loading volume Combination tailgate with two grain chutes Unladen weight approx. 6,300 kg Demonstration vehicle – immediately available First registration: 02/07/2025 Fifth wheel height: 1,150 mm - BPW disc brake axles Ø430 - Lift axle on first axle - Automatic tipping lowering function - SAF gearbox landing legs, full load rated - Aluminium air tanks - WABCO braking system 2S/2M - Combination tailgate with 2 grain chutes - Automatic 2-hook lock + threaded bolts - Double pendulum bearing and replaceable rubber seal - Floor plate 7 mm Endur-aluminium HB 114 - Side wall profiles 350 x 40 mm, inside wall thickness 2.5 mm - Roll-up tarpaulin with quick-release fastener, silver colour - Operator's platform mounted on the chassis - BINOTTO hydraulic cylinder, up to 250 bar - 6-fold tyre fitment 385/65 R22.5 Bridgestone R179XM - Steel rims - ASPÖCK lighting system - Full LED rear lights - 2 LED reversing lights - Toolbox and water tank - Aluminium access ladder Giedpjxv Nwuofx Aa Uju - Aluminium rear climbing ladder - Shovel/broom - Frame painted RAL 7021 black grey, body painted RAL 9006 silver Interim sale and errors in this offer are expressly reserved. Only the agreements in the order confirmation or the sales contract are binding. For precise specification details and prices, please contact our sales staff. Please get in touch with us.

Stanje: rabljeno, Used control cabinet from a Weinig Unicontrol 6, suitable as a source for spare parts or for building a new control cabinet. Giodjt Na Dropfx Aa Uou Contents include, among others: - Brake unit by Hilger & Kern - Transformer Rathgeber Type ET 1000.

Stanje: rabljeno, Used control cabinet from a Weinig Unicontrol 10, suitable for spare parts or for building a new control cabinet. Contents include, among others: - Siemens Simatic S5 - Siemens EMG 45 Giodpfxerrk I He Aa Uou

Stanje: novo, Leto izdelave: 2026, The WP300 self-centering three-jaw chuck is a specialized accessory designed for securing pipes and cylindrical or hexagonal workpieces in welding positioners and welding rotators. With its precise, self-centering clamping mechanism, it ensures reliable and accurate positioning of the workpiece during rotation, resulting in higher quality and repeatability in the welding process. Key advantages of the WP300 chuck - Precise self-centering mechanism – enables quick and accurate centering of pipes and workpieces, eliminating the need for manual positioning. - High versatility – compatible with a wide range of welding rotators and positioners, including PS310, PS320, and PS360 models. - Clamping stability – thanks to three independent jaws, the workpiece remains securely fixed even at high rotational speeds. - Robust construction – manufactured from high-grade materials resistant to vibrations, loads, and harsh welding environments. - Optimal working diameter – capable of clamping pipes up to 270 mm in diameter, offering a broad application range. Construction and technology The WP300 model features a compact and durable steel construction suitable for intensive use. The three-jaw mechanism operates synchronously, automatically aligning the workpiece with the axis of rotation. The large external diameter (300 mm) and through-hole (100 mm) make it suitable for handling a wide range of component sizes. The mounting holes are designed to ensure full compatibility with CORMAK welding positioners. Precision and operational efficiency Gisdjycqptspfx Aa Ueu The WP300 chuck delivers high clamping repeatability, translating into precise circumferential welds. It shortens workpiece preparation time and reduces setup errors, increasing production efficiency and improving operator safety. The sturdy build guarantees stable performance, even with dynamic loads. Applications The WP300 chuck is intended for use in circumferential welding processes, particularly in manufacturing plants, metalworking workshops, and companies specializing in steel element prefabrication. It is suitable for welding rotators and welding positioners, enhancing their functionality and versatility. Technical specifications - Maximum pipe diameter: 270 mm - External diameter: 300 mm - Internal diameter: 100 mm - Mounting hole spacing: 105 mm - Mounting hole diameter: 9 mm - Compatible with welding positioners: PS310, PS320, PS360 - Weight: 14 kg

Stanje: novo, Leto izdelave: 2026, The WP200 self-centring three-jaw chuck is a professional accessory designed for use with welding positioners and welding rotators, such as the PS310 and PS320 models. Its precise clamping mechanism enables quick, stable, and concentric securing of pipes and workpieces with cylindrical or hexagonal cross-sections, significantly improving the efficiency and safety of circumferential welding processes. Key features of the WP200 chuck: - Self-centring three-jaw mechanism – ensures uniform and stable clamping of components regardless of their shape. - Versatility – compatible with most welding rotators and welding positioners, including CORMAK PS310 and PS320. - Precise fastening – perfect adaptation to the workpiece translates to higher weld quality and stable rotation. - Durable construction – robust, compact body made from durable materials resistant to high mechanical and thermal loads. - Compact dimensions and easy installation – low weight and accurately spaced mounting holes allow for quick integration with welding equipment. Design and technology The WP200 chuck features three high-quality jaws designed for quick and automatic centring of the workpiece along the axis of rotation. The external diameter of 200 mm and internal diameter of 80 mm allow for clamping workpieces up to 170 mm in diameter. The body is made of high-grade steel, ensuring resistance to deformation during prolonged use. Precision and performance The self-centring three-jaw mechanism of the WP200 chuck significantly reduces set-up time. Minimised play and elimination of positioning errors directly contribute to improved quality of circumferential welds. Stable clamping also provides increased operator safety. Application The WP200 chuck is intended for use with welding rotators, welding positioners, and rotary tables in the welding of pipes, flanges, rings, and cylindrical components. It is ideally suited for welding workshops, production facilities, and the structural steel industry. Godpfx Aasycqnvo Ujiu Technical data Max. pipe diameter: 170 mm External diameter: 200 mm Internal diameter: 80 mm Mounting hole spacing: 85 mm Screw hole diameter: 9 mm For welding positioners: PS310, PS320 Weight: 10 kg

Stanje: dober (rabljeno), Vpenjalna plošča s T-utori, T-utorna plošča, štancarska miza, vpenjalna plošča, polje plošč, Gijdpfeyn Rc Rex Aa Uju -T-utorna plošča: vpenjalna plošča s T-utori -Vpenjalna površina: 1295 x 2000 mm -Višina plošče: 90 mm, spodnja stran skobljana -Širina utora: 27 mm -Dimenzije: glej risbo pri fotografijah -Gabariti: 1295/2000/H90 mm -Teža: 1587 kg

Stanje: dober (rabljeno), Leto izdelave: 1991, CNC surface grinding machine, manufacturer ELB, model: BRILLANT B8 UNICON, equipped with CNC dresser for profile grinding. Grinding capacity: longitudinal 800 mm, width 500 mm, height 400 mm. Magnetic chuck: 800 mm x 450 mm, with paper band filter and extraction system. Complete machine documentation included. Giedpfx Aevk Elzoa Uou

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 2.600 h, Robot ABB IRB4600-45/2.05 in krmilnik IRC5-TPU-RW6.X RAZVOJ GSG ROBOTICS Podjetje GSG Robotics GmbH, ustanovljeno leta 2005 v Güterslohu, ima od leta 2015 sedež v Marl-u, kjer ponuja široko servisno področje za vzdrževanje in popravila robotov. Skozi leta smo postali celovit partner za vsa vprašanja povezana z industrijskimi roboti in avtomatizacijsko tehnologijo. Smo ponudnik celovitih storitev za dva dobro znana proizvajalca robotov, ABB in Fanuc. Gedpfx Aexq Tq Usa Usiu

Stanje: zelo dobro (rabljeno), Robot ABB IRB4600-60/2.05 in krmilnik IRC5 RAZVOJ GSG ROBOTICS Podjetje GSG Robotics GmbH, ustanovljeno leta 2005 v Güterslohu, ima sedež v Marl od leta 2015 in ponuja obsežno servisno območje za vzdrževanje in popravila robotov. Skozi leta smo postali celovit partner za vsa vprašanja v zvezi z industrijskimi roboti in avtomatizacijsko tehnologijo. Smo ponudnik celovitih storitev za dva znana proizvajalca robotov, ABB in Fanuc. Gsdpfjxq Tq Iex Aa Ujiu

Stanje: dober (rabljeno), Technical Data for the Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Technical Data for Installation: Number of Rack Rows: 01 pcs. Length per Rack Row: 13,230 mm Number of Bays per Rack Row: 06 pcs. Number of Levels plus Floor Level: 04 pcs. Godotpndhopfx Aa Uoiu Scope of Delivery: 07x pallet rack uprights, used Material color: Sendzimir galvanized Frame type: P 95 Frame profile dimensions: 90 x 75 x 2.50 mm Adjustment grid: 50 | 50 mm Bay load: 10,400 kg at buckling height 1,500 mm (for minimum 5 bays per rack row) Incl. horizontal and diagonal braces, base plates Uprights are pre-assembled (bolted truss) Height: 6,295 mm Depth: 850 mm 48x pallet rack beams, used Material color: grey INP profile: 80 x 42 mm Beam type: TRV1-210-08-l Bracket: 5 HK (hooks) Clear width: 2,100 mm 96x safety pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting 28x anchor bolts, new Manufacturer: Hilti Type: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 14x leveling shims, used Design: completely galvanized For leveling the rack uprights when installed on uneven ground 01x load plate With details on bay and shelf load, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for collection only. Transport or shipping of this item beyond collection is subject to additional costs, which can be requested separately from us depending on place of delivery and scope of supply.

Stanje: dober (rabljeno), Technical data for the shelf panel: Shelving system: SSI Schäfer Gedpfx Aswvq Epea Uoiu Type: R 3000 Scope of delivery includes: Shelf panels, used Material colour: Sendzimir galvanized Total width: approx. 1,295 mm Total depth: approx. 790 mm for frame depth: approx. 800 mm Height: approx. 40 mm Number of reinforcements: 02 pcs Weight / pc.: approx. 12.82 kg Currently in stock: 1,338 pcs. Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is offered for collection only. Any transportation or shipping beyond this is subject to additional costs, which can be quoted separately depending on the delivery location or scope. Please contact us for further details.

Stanje: novo, Included in the scope of delivery: Steel panel, new Material color: Sendzimir galvanized Total width: approx. 295 mm Total depth: approx. 1,110 mm Internal depth: approx. 1,104 mm For upright depth: approx. 1,100 mm Clear support width: approx. 992 mm Beam support width: approx. 55 mm Edge height: approx. 25 mm Material thickness: approx. 2.00 mm Weight per piece: approx. 5.95 kg Additional quantities available on request. Quantity: - clear beam width: Gsdpfxev Al Uto Aa Ueiu 01 pc. 02 pcs. 06 pcs. - 1,800 mm 07 pcs. - 2,100 mm 08 pcs. - 2,400 mm 09 pcs. - 2,700 mm 10 pcs. - 3,000 mm 11 pcs. - 3,300 mm 12 pcs. - 3,600 mm 13 pcs. - 3,900 mm 20 pcs. 50 pcs. 75 pcs. 100 pcs. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the item: This item is only offered for collection. Any transport or shipping of this item beyond that is subject to additional costs, which can be quoted separately depending on the place of delivery and scope of delivery.