Stroj Za Obdelavo Konca Cevi nakup rabljenega (101.022)

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Schmidler S4 Joinery Machine - 4-strand transverse infeed conveyor (upward inclined) - Infeed roller conveyor - Edge-flipping device integrated into the infeed roller conveyor - Zero-point detection - Electronically controlled under-table mitre saw Saw blade diameter: 710mm Swivel angle: 360 degrees Inclination: 0–65 degrees - Waste wood pusher - Horizontal marking pen (from below) and vertical marking pen (from behind) - Universal milling unit incl. finger joint cutter and dovetail cutter head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Vertical profiling cutter (bottom) for inside radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color monitor Maximum workpiece dimensions: Height: 300mm Width: 400mm Length: approx. 12,000mm 4-sided planer – Schmidler Minimum workpiece dimensions: Height: 30mm Width: 50mm Feed speed: 9/18 m/min Planer shaft diameter: 140mm Chamfering unit on 4 sides Infeed roller conveyor Fgsdpfxoya Dc Is Abrjh Outfeed roller conveyor with push-off ruler and stacking rods Machine in good used condition, fully operational and currently in use. Viewing by arrangement possible at any time. Immediate sale or by arrangement.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Hidravlični stroj za upogibanje cevi Komplet upogibnih orodij z upogibnimi trni in upogibnimi čeljustmi: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Dodatni upogibni trni, brez upogibnih čeljusti: Fgjdewnrt Sjpfx Abrsh Ø 28, 2 x 38 + 42 mm Naprava za predhodno montažo s hidravličnim cilindrom Hidravlično pogonjena enota za odstranjevanje robov z notranje in zunanje strani cevi, premera 6 – 48,3 mm Maks. dolžina potiskanja cevi: 3000 mm Masa stroja: približno 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Nemčija

Stanje: rabljeno, Leto izdelave: 1987, Pipe Ø: 10 - 50 mm Wall thickness: 1 - 6 mm Reference material (tensile strength): 400 N/mm² Fgsdpog I Di Eefx Abreh Speed: approx. 120 m/min

Stanje: dober (rabljeno), Leto izdelave: 2003, številka stroja/vozila: 271537, Funkcionalnost: popolnoma funkcionalen, moč: 14 kW (19,03 KM), vhodna napetost: 400 V, vhodni tok: 24 A, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, Ta stroj so prej uporabljali v proizvodnji podjetja Aptiv. Strokovno so ga izključili, previdno razstavili in varno zapakirali v leseno škatlo za varen transport in shranjevanje. Fodpfx Abezi U Nporegh

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.800 mm, skupna dolžina: 18.000 mm, Separator plavajoče-potopne vrste za ločevanje različnih vrst plastike z gostotno separacijo. Delovna širina: 1.800 mm Delovna dolžina: 9.000 mm Skupna dolžina: 18.000 mm 2 krivini po 45° Korito iz nerjavečega jekla (1.4571) Verižni izpust s plastičnimi zagrabniki, pogon 2,2 kW 2 potopni valji iz nerjavečega jekla (1.4571) Vključno z mehanskim nadzorom nivoja vode Po potrebi na voljo z dozirnim zalogovnikom in odsesavanjem lahkega materiala. Fgsdpfx Abozc Ekljroh

Stanje: rabljeno, Tehnične podrobnosti: Debelina pločevine: 10 mm Debelina materiala: 4,5 - 10 mm Moč: 2000 Watt Obratovalna napetost: 220 V s 4-metrskim kablom Približna teža stroja: 18 kg Dimenzije stroja: D: 550 x Š: 120 x V: 260 mm OBLIKOVALEC VARILNIH ROBOV – POSNEMALNI STROJ ali ŠKARJE ZA PLOŠČE v kovčku Ročna naprava Uporaba: rezanje in zareza ploščatih obdelovancev Debelina materiala je odvisna od vrste materiala (max. 10 mm) Orodje = spodnji nož (matrica) in zgornji nož (štancek) posamezno z dodatno opremo kot na sliki, za 200,00 evrov Fsdou Ngfqopfx Abrsgh

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm Fedpfx Aolgvkijbregh - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: dober (rabljeno), Leto izdelave: 1995, Stroj za upogibanje cevi MARK / Ridgid Tip: 2H B Brez orodij Fsdpozulzgsfx Abrjgh

Stanje: novo, Condition: new Delivery time: approx. 8 weeks from order confirmation Country of origin: Italy Price: €12,460 Fjdpfx Aewiru Sebrsgh Leasing rate: €239.23 Max. diameter (steel pipe): 60 mm Length: 500 mm Width: 760 mm Height: 1,000 mm Weight: 186 kg Max. bending modulus (E-modulus): 10 cm³ Standard steel pipe: 60 x 4 mm Gas pipe for piping: 2" x 3.91 mm Furniture tube: 60 x 4 mm Stainless steel AISI 304-318: 60 x 2 mm Stainless steel AISI 308 (food grade): 60 x 3 mm Soft brass: 60 x 6 mm Hard copper and aluminium: 64 x 6 mm Soft copper: 64 x 6 mm Conduit pipe (TAZ): 63 x 4 mm Mepla, Geberit and similar: 50 x 4 mm Round steel (S275JO): 35 mm Bar steel (S275JO): 35 x 35 mm Flat steel (S275JO): 60 x 20 vertical, 60 x 35 mm Max. bending radius: 380 mm Min. bending radius: 10 mm Min. tube Ø: 10 mm Max. bending speed: 1.5 / 3 rpm Motor: 1.5 kW Digital display for bending angle Digital display for clamping point Quick-change tool system with various radii available Springback compensation Foot pedal Operator’s manual Tools not included, prices on request

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Pipe diameter 10.0 - 60.0 mm steel Wall thickness 3.0 mm steel Pipe diameter 64.0 mm CU/Alu Wall thickness 4.0 mm Rotations per minute 1.25 - 2.50 rpm Solid material - diameter 35.0 mm Voltage 400 Volt Control ISITAN NC Total power requirement 2.0 kW Weight 140 kg Dimensions L-W-H 380 x 900 x 600 mm Exhibition machine – like NEW Fgodpjxabu Hjfx Abroh never used (!!) Special price on request - Capacity steel pipe 60.0 x 3.0 mm - Capacity gas pipe 2" gas x 3.91 mm - Capacity square profile (FE 42) 60 x 30 x 4.0 mm - Max. bending radius 200 mm - Minimum radius 2 x D - Hexagonal tool holder - min. outside diameter 5 mm - 1/8" gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Infinitely variable adjustment of bending speed - One bending speed - 1x movable foot switch - 1x bending tool set included * For pipe Ø 38 mm / radius 155 * Additional segments available on request at extra charge * Tool holder ERCOLINA

Stanje: rabljeno, Deburring brush machine, tube deburring machine ERINI Type 250 Year of manufacture: approx. 1995 Brush diameter: 250 mm Brush width: 25 - 60 mm Speed: 1500 / 3000 rpm Power: 2.2 / 2.8 kW Power supply: 380 Volt, 50 Hz Fedpfx Aepu R Ngsbrsgh - Material support - new deburring brush - Extraction connection Ø 100 mm Dimensions (L x W x H): 620 x 500 x 1150 mm Weight: 100 kg In good condition

Stanje: novo, Premer valja 350 mm Premer gredi 110 mm Hitrost upogibanja 1-5 m/min Upogibna zmogljivost 157 Wcm³ Skupna potrebna moč 7,5 kW Teža stroja pribl. 2950 kg Oprema: - Neposreden pogon vseh treh gredi - Posamično nastavljanje stranskih valjev - Uporaba v vodoravnem in navpičnem položaju - Hidravlično pomični stranski poravnalniki (preko upravljalne konzole) - 2 digitalna prikazovalnika za nastavitvene valje - Kaljeni valji - Premična upravljalna konzola Fjdpey H N Hgefx Abregh

Stanje: zelo dobro (rabljeno), Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Turret: 12-position adjustment Mandrel length: 4500 mm Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 mandrels - Mandrel retraction device - Foot pedal - Adjustable bending speed Fedpfxjn Smq Ij Abregh Country of origin: The Netherlands Motor power: 7.5 kW Machine dimensions (LxWxH): 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Leto izdelave: 1995, Dodatna oprema 6000D: premer 6 do 60 x 4 mm Samodejno umikanje vretena Ročna naprava za vrtenje Fgodpfxjzlg Ayo Abrjh

Stanje: dober (rabljeno), Leto izdelave: 1996, številka stroja/vozila: 5090, Ponudba 22186 Fsdpfx Abjztvgwerogh Tehnični podatki: - Upogibna moč - Cev pri 45 kg / mm²: Ø 6 – 48 mm - Polni material do približno: 30 mm - Maksimalni kot upogiba: 180° - Polmer upogiba: 2 x D - Pogon: 400 V / 1,5 kW - Potrebna površina: približno Š 4500 x V 1400 x G 1000 mm - Teža: približno 600 kg - Z: digitalni prikaz kota upogiba + natančna nastavitev kota upogiba - Naprava za upogibanje s vretenom 3,0 m, s hidravličnim povratkom - Upogibna orodja: 20 R 60; 22 R 66; 25 R 75 mm - 25 R 50; 38 R 114 mm - različna upogibna vretena: 3000 mm

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, ALMI stroj za izsekavanje cevi AL2 za cevi z zunanjim premerom Ø48,3 (1 1/2″) in Ø60,3 (2”) mm Stroj za izsekavanje cevi za cevi z zunanjim premerom Ø48,3 (1 1/2″) in Ø60,3 (2”) mm enostavna montaža na steno Fodpfxjzzk Dme Abrsgh idealen za dvojne kotne spoje maks. debelina stene: 3 mm jeklo, 2,5 mm nerjavno jeklo, teža 15 kg

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Tip: HRA4/80-4 Fgedpfehmfh Hox Abreh Cevi: Ø 6 ÷ 24 mm, debelina stene = 1 ÷ 2,5 mm • Konica: Ø3 ÷ 12 mm

Stanje: novo, Premer osi: 40 mm Število vrtljajev osi: 8,5 obr/min Posuvna pot: 120 mm Premer valjev: 152 / 162 mm Moč motorja: 1,1 kW Priključna napetost: 400 V Fodpfxjy H N I Do Abrjgh Teža: 395 kg Dimenzije stroja: 900x600x1100 mm Oprema/Dodatki: - Dva pogonska valja - Ročno pomikanje zgornjega valja - Delovni položaj horizontalno in vertikalno - Ležaji osi s stožčastimi valjčnimi ležaji - Uporaba izmenljivih drsnih vodil na vodilnem vozičku - Standardni komplet valjev je vključen. Uporablja se lahko za upogibanje različnih profilov.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, ALMI stroj za izrezovanje cevi AL1 za cevi z zunanjim premerom Ø26,9 (3/4″), Ø33,7 (1″) in Ø42,4 (1 ¼”) mm Stroj za izrezovanje cevi za cevi z zunanjim premerom Ø26,9 (3/4″), Ø33,7 (1″) in Ø42,4 (1 ¼”) mm enostavna montaža na steno idealno za dvojne kotne spoje maksimalna debelina stene: 3 mm jeklo, 2,5 mm nerjavno jeklo, teža 8 kg Fgedpszzk Dgjfx Abrjh

Stanje: rabljeno, Leto izdelave: 1997, Premer cevi: 60 mm Debelina stene: 6 mm Minimalni polmer upogibanja: 180 mm Skupna potrebna moč: 5,5 kW Fedpfx Aet I D Uxjbrjgh Teža stroja: ca. 1300 kg Dimenzije: ca. 3500 x 1250 x 1300 mm Opis: Okrogla cev, jeklo (S235): 60,0 x 6,0 mm Okrogla cev, nerjavno jeklo (S 355): 60,0 x 4,0 mm Kvadratna cev, jeklo: 50 x 50 x 4,0 mm Pravokotna cev, jeklo: 60 x 40 x 2,0 mm Maks. uporabna dolžina: 3048 mm Hitrost upogibanja: 10°/s Vključno z orodjem (glej fotografije) Dorn ni več na voljo, ga je mogoče naknadno dokupiti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, For sale: Hundegger SC 480 Speed-Cut – Year of manufacture 2023 We are selling our fully automatic cutting system Hundegger SC 480 Speed-Cut from 2023. Fgodsza Dzdjpfx Abroh Machine specifications (excerpt): - SC 480 Fully automatic cutting system, base machine with 5-axis saw unit – mirror version - Hundegger production software CAMBIUM - Line laser for component referencing - Infeed and transfer cross conveyor 10.1 m, 7 strands (for timber lengths up to 13 m) - Hydraulic lifting table for timber length 13 m (6 t) - Vertical finger milling unit 6.5 kW as well as 10 kW HSK spindle - 4-axis revolver milling unit 7.5 kW universal unit - Drilling unit 3.0 kW hydropneumatic - Slotting unit - Inkjet marking system (max. 101.6 mm) - Label printer at component outfeed - Pneumatic discharge table for timber lengths up to 13 m - Central lubrication system - Various other options and units General information: Year of manufacture: 2023 Operating hours: low (machine from ongoing production) Regularly serviced by Hundegger Condition: very good Contact: Philipp Schöb, Schöb AG, Haagerstrasse 80, 9473 Gams

Stanje: novo, Leto izdelave: 2025, Pipe diameter: 48.3 mm Wall thickness: 3.25 mm Bending radius min. / max.: 180 mm Bending speed: 20°/sec Total power requirement: 2.4 kW Machine weight: approx. 700 kg Space requirement: approx. 3880 x 800 x 1250 mm TUBOMAT complete system - length: 3000 mm Standard equipment for bending: • Electronic Siemens SIMATIC control • Function selection and operation via 4.3 inch touch panel • Familiar 4-position bending angle preselection or program mode • 80 memory slots, up to 10 sets • Actual/target value display for bending angle • Compact, forward-mounted bending head • Optimized tooling concept • Hydraulic bending drive, operated via proven hand lever • Hydraulic pipe clamping • Hydraulic pressure die positioning • Hydraulic mandrel retraction • Mobile machine design Saw unit for optimal right-angled cuts: • Visualization of saw position by line laser • Foldable saw guard • Adjustable saw feed Deburring unit for internal and external deburring Universal base mount as drive unit for assembly attachments Fgodpfxexcuics Abroh • With swivel device for optimal accessibility Including optional equipment: - Includes 6 each of length and angle stops - length 3000 mm - 2-axis positioning display for length and rotation (displayed on touch panel) - length 3000 mm - Early mandrel retraction for optimum bend quality • For the use of ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment programmable stepless up to 10° - Automatic mandrel lubrication as minimum quantity oil lubrication - TUBOLUB Z-M (5 litres / container) for minimum quantity lubrication - Interface for network connection and data import from PIPEFAB - Assembly attachment for cutting ring assembly with measuring system (automatic pressure adjustment) - Software - PIPEFAB 4.0 BE basic tube bending software package • Oracle Express database for single-user application • Creation of isometric drawings (single tube) • ConCSVImp - CSV import interface • Calculation of bending data considering springback, elongation and rebound • Checking of clamping lengths, start and end lengths • Output of bending data (printout) • BendSim - bending simulation and graphical display via parametric tooling layout • BendCon - generation and transfer of NC bending data for TUBOMAT - IsoTools – 3D display, labeling tools - ConSTEP - STEP file import interface - Tool holders - Bending tools consisting of bending die, clamping piece and fixed glide shoe - Bending mandrels 3000 mm for steel tubes, version with lubrication channel for minimum quantity oil lubrication - Pre-assembly studs - Counterhold plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes - Commissioning - Packaging costs

Stanje: novo, Leto izdelave: 2025, Pipe diameter: 48.3 mm Wall thickness: 3.25 mm Bending radius min./max.: 180 mm Bending speed: 20°/sec Total power requirement: 2.4 kW Fgedpfjxcuiiex Abroh Machine weight: approx. 700 kg Space requirement: approx. 3880 x 800 x 1250 mm TUBOMAT complete system – length 3000 mm Standard bending equipment: • Electronic Siemens SIMATIC control • Function selection and operation via 4.3-inch touch panel • Well-known 4-position bending angle preselection or program mode • 80 memory slots for up to 10 sets • Actual/target value display for bending angle • Compact, forward-positioned bending head • Optimized tooling concept • Hydraulic bending drive, operation via proven manual lever • Hydraulic tube clamping • Hydraulic positioning of slide piece • Hydraulic extraction of bending mandrel • Mobile machine usable Sawing unit for optimal and precise right-angle cuts: • Visualization of saw position via line laser • Foldable saw guard • Adjustable saw feed Deburring unit for internal and external deburring Universal base holder as drive unit for assembly attachments: • With swivelling device for optimal accessibility Including optional equipment: - Includes 6 each of length and angle stops – length 3000 mm - 2-axis position indicator for length and rotation (displayed on touch panel) – length 3000 mm - Early mandrel extraction for optimizing bend quality • For use with ball mandrels • Mandrel is automatically pulled during the bending process • Continuously programmable adjustment up to 10° - Automatic mandrel lubrication as minimum quantity oil lubrication - TUBOLUB Z-M (5 liters/packaging unit) for minimum quantity lubrication - Interface for network connection and data import from PIPEFAB - Assembly attachment for cutting ring assembly with measuring system (automatic pressure control) - Software: PIPEFAB 4.0 BE Basic Package pipe bending software • Oracle Express database for single workstation application • Creation of isometrics (single pipes) • ConCSVImp – Import interface Format CSV • Calculation of bending data considering springback, elongation, and rebound • Check of clamping lengths, starting and ending lengths • Output of bending data (printout) • BendSim – Bending simulation and graphical representation via parametric tooling layout • BendCon – Creation and transfer of NC bending data for TUBOMAT - IsoTools – 3D visualization, labeling tools - ConSTEP – Import interface in STEP format - Tool holders - Bending tools consisting of bending roller, clamping piece, and fixed slide piece - Bending mandrels 3000 mm for steel pipes, version with lubrication channel for minimal oil lubrication - Pre-assembly socket - Counter plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel pipes - Commissioning - Packaging costs

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Oprema: podajalnik palic, transportni trak za ostružke, Podjetje Index je izvedlo obnovo za 380.000 €! OPREMA pripravljeno kot dvojni 3-vretenik prijemna naprava menjalnik za rezanje navojev Fedpfxsyx Tzrs Abrogh integrirani podajalnik Cucci Giovanni nadzor loma orodja in monitoring orodij Brankamp podajalnik palic Cucci Giovanni (2015) transporter za ostružke Knoll (2015)

Stanje: rabljeno, Leto izdelave: 1992, Tehnične podrobnosti: Premer cevi: 6 mm Maks. premer cevi: 16 mm Maks. kotni upogib: 90 ° električna izvedba – napetost/frekvenca: 220 / 50 V/Hz Skupna priključna moč: 0,75 kW Fsdpjwivn Nofx Abrjgh Teža stroja cca.: 0,145 t Dimenzije stroja D x Š x V: cca. 1,0 x 0,8 x 1,2 m Področje uporabe: Mini cevni upogibalnik s prostim upogibnim vodilom. Obdelava preciznih jeklenih cevi po DIN 2391/C, material 35.4 NBK Ø 6 - 16 mm. -s hidravličnim pogonom -8x predizbor upogibnih kotov do 180° -cevni prislon 1 m gumb za zaustavitev v sili -pomični z nožno zavoro -vrtalna glava nihajna (navpično v vodoravnem položaju) potrebno hidravlično olje = cca. 20 litrov (npr. Esso Nuto 32) Pribor: različna orodja za upogibanje