Sick Codeleser, Zv2D621D-2Msfbb5 nakup rabljenega (248)

Stanje: novo, Pressure: 150 Ram Adjustment: (automatic adjustment) 40 mm Stroke length (max.): 10–125 mm Total power requirement: 15 kW Approx. weight: 9500 kg Dimensions (LxWxH): 1800 x 1500 x 2600 mm Strokes/min: 50–90 Machine and equipment in accordance with CE regulations Light sensors: SICK or PILZ PLC control: Siemens S7 – 1200* Stroke adjustment: directly via control panel Balancing system: integrated Speed adjustment: via Mitsubishi frequency inverter Machine frame: solid steel construction Guidance: inner and outer eccentric guide Crankshaft: made of hardened 4140 steel Clutch & brake: pneumatic combination Safety valve: two-way system Safety control (Safety PLC): SICK or PILZ Operation: two-hand control and foot pedal possible Lubrication: automatic lubrication system Overload protection: hydraulic Safety device: safety enclosure around work area External connections: 8-pin inputs & outputs on PLC (for signal exchange & upgrades) Vibration damping: rubber mats under machine feet (1 set – 4 pieces) Voltage/frequency: 400 V / 50 Hz Fuse: 32 A required Standards: Machine and equipment compliant with CE directives Control unit: 19-inch Siemens touchscreen Technical data: - Operation: jog mode / single stroke / continuous stroke - Press force: 150 t - Table plate: 750 x 1000 mm (fixed table plate) - Stroke length: 10–125 mm, automatic stroke adjustment via PLC - Slide plate: 500 x 800 mm (Ø 55 mm pin receptacle & T-slots as per customer request) - Strokes: 50–90 /min - Motor: 15 kW (1400 rpm) - Throat depth: 325 mm - Installation height: 475 mm to 295 mm - Pin hole in ram: 50 mm - Length: 1,800 mm - Width: 1,500 mm - Height: 2,600 mm Gsdpfetqwtdsx Ahmsbn - Weight: approx. 9,500 kg - Ram adjustment: 40 mm (automatic adjustment)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Fully Automatic Stretch Wrapping Machine Spinny S2300 with Electromechanical Top-Platen Pallet dimensions: L 1200 x W 800 x H 2600 mm Max weight: 1,000 kg Hourly throughput: approx. 20 pallets/hour (depending on pallet height and wrapping pattern) Conveyor height: 500 mm Technical Specifications: • Wrapping cycle programmable via the electronic control panel and SIEMENS S7-1200, KTP700 operator panel • Control system: SIEMENS PLC S7 1200 SAFE and HMI KTP700 • 15 freely programmable wrapping programs • Turntable stop in end position • Conveyor height: 500 mm • Usable roller conveyor width: 1,000 mm • Photoelectric sensor for automatic pallet height detection • Film clamp for securing the film to the pallet load • Automatic film cutting system at the end of the wrapping cycle • Frequency inverter for adjusting the turntable speed from 5 to 15 rpm • Frequency inverter for adjusting the film carriage speed • Powerstretch 250% • Film sealing with hot pads and counter-blade • Standard colours: RAL 7001 grey for fixed parts, RAL 7016 grey for moving parts and plastic covers • Volt-free contacts • 1 frequency inverter for controlling the conveyor at the turntable POWER SUPPLY > Power supply: 400 V, 50 Hz, 3-phase + PE > Frequency: 50 Hz > Installed load: 3 kW > Auxiliary supply: 24 V DC > Compressed air: 6 bar FILM AND ROLL PROPERTIES > Thickness: 12 – 23 µm > Recommended thickness: 20 µm > Core diameter: 76 mm > Height: 500 mm > Maximum roll weight: 16 kg > Maximum outside roll diameter: 250 mm Powered outfeed roller conveyor, with double sprockets, frequency controlled Length: 1,470 mm Usable width: 1,000 mm Height: 500 mm Roller diameter: 89 mm Gbjdowxrh Dopfx Ahmon Pitch: 158.75 mm 2 pcs. SICK M40 UE403 PSD01 1047810 Safety light curtains, safety category 4, safety fences, height: 2,200 mm with access door, dual-channel safety magnetic sensor integrated in the safety control

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, AMADA MODEL HFT 8025, 80 ton sila x 2500 mm dužina prešanja, hidravlična spodnja upogibna stiskalnica, popolnoma opremljena s CNC krmiljenjem CD 2000 s 4 osmi in barvno grafiko. Stroj je opremljen z elektronskimi varovali ERWIN SICK (montirani senzorji na stroju), stransko in zadnjo zaščitno ograjo z varnostno zaporo. Model: Amada HFT 8025 CNC spodnja upogibna stiskalnica Leto: 2010 Tonska moč: 100 kN Tip CNC: CD 2000 Upravljane osi: Y1, Y2, X, R Maksimalna dolžina upogibanja: 2500 mm Odprta višina: 470 mm Dolžina hoda: 350 mm Hitrost približevanja: 100 mm/s Hitrost upogibanja: 1 - 10 mm/s Povratna hitrost: 1 - 100 mm/s Kapaciteta olja: [ni podatka] Moč motorja: 7,5 kW Teža: 6.100 kg Dolžina mize: 2.500 mm Širina mize: 60 mm Gbsdpfsu A Dgrex Ahmjn Odprta višina: 470 mm Globina grla: 420 mm CNC upravljanje: da Zadnji prislon (os X): Hitrost prislona: 700 mm/s Maksimalna dolžina prislona: 1.000 mm Osa R: 250 mm Stroj je možno demonstrirati pod napetostjo. BROŠURA IN DODATNE INFORMACIJE NA VOLJO NA ZAHTEVO.

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €59,800 Leasing rate: €1,130.22 Pressing force: 100 t Stroke: 400 mm Table size: 800 x 500 mm Installation height: 500 mm Rapid advance speed: 110 mm/s Operating speed: 10 mm/s Return speed: 160 mm/s Motor power: 11 kW Length: 1,900 mm Width: 1,700 mm Height: 2,930 mm Weight: 5,500 kg Operating pressure: 250 bar Welded monoblock frame Hardened and chrome-plated cylinder 2 auxiliary cylinders and 2 round guides T-slots can be configured as per customer requirements Pump, valves, and filter by Bosch Rexroth Hydraulic overload valve Hydraulic proportional valve Gbjdpewmwvcjfx Ahmjn Cooler Electrical components by Siemens 8 additional digital inputs and outputs 7-inch touchscreen Siemens S7 PLC Stroke, pressure, speed, and dwell time adjustable via PLC Remote maintenance access Light curtain by Sick Safety enclosures Safety PLC by Siemens or Sick Sensors and light curtain conforming to Category 4 Two-hand control panel Reset and emergency stop button Equipment in compliance with CE directives

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, širina mize: 720 mm, dolžina mize: 1.000 mm, prebojna odprtina v mizi: 220 mm, nastavitev hidravličnega cilindra: 120 mm, nastavitev hoda: 125 mm, Oprema: varnostna svetlobna zapora, PLACE OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY TIME: IMMEDIATE FROM STOCK GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Vibration stress relief will be applied to the frame and welded components - Table parallelism and squareness tolerance conform to ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 8 slideways - Ram with cushion cylinder - Ram, connecting rod, and clutch fork made of steel casting, GS52 - High-strength monoblock crankshaft – 4140 - Bronze bushings inside the connecting rod (Zr14) - Rear flywheel - Spare bolster plate included - Hydraulic overload protection - Motorized bed-to-ram adjustment - Automatic central lubrication - Pneumatic pedal with latch and dual-hand control with timer - Electrical cycle counter - PLC application and touchscreen - DELTA - Electrical switchgear components by SIEMENS-SCHNEIDER - CE application – OPTIONAL - Finger protection light curtains – SICK, LEUZE - Safety PLC (Controls complete electrical system, valves, dual-hand and pedal) – PILZ - Dual coil safety valve – GPA, TOPAIR - Panel and position-locked limit switches - Safety wedge - Protective covers in accordance with CE requirements TYPE: D-TYPE MONOBLOCK FRAME Capacity: 150 Ton Bed-to-Ram Distance: 500 mm Distance Between Housings: 1080 mm Ram Adjustment: 120 mm Approx. Press Width: 1400 mm Approx. Press Depth: 1900 mm Approx. Press Height: 3000 mm Table Bore Diameter: 220 mm Table Size: 720 x 1000 mm Die Clamping Slot Diameter: 55 mm Ram Size: 450 x 800 mm Bed Height from Floor: 900 mm Stroke Adjustment: 10 – 125 mm Strokes Per Minute: 50 spm Gjdpfevyrywsx Ahmobn Motor Power: 15 + 0.75 kW Motor Speed: 1450 RPM Approximate Weight: 12,000 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 80 t, širina mize: 600 mm, dolžina mize: 800 mm, višina mize: 850 mm, prebojna odprtina v mizi: 190 mm, nastavitev hidravličnega cilindra: 85 mm, nastavitev hoda: 100 mm, Oprema: varnostna svetlobna zapora, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief by vibration will be applied to the frame and welded parts - Table parallelism and perpendicularity tolerances in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 8 slide guides - Ram with cushioning cylinder - Ram, connecting rod, and ram nose made of GS52 cast steel - High-strength one-piece crankshaft – 4140 - Connecting rod bushings made of bronze (Zr14) - Rear-mounted flywheel - Equipped with spare bolster table - Hydraulic safety device - Motorized ram height adjustment - Automatic central lubrication - Pneumatic pedal with safety latch and double-handed operation with timer - Electric counter - PLC control and touchscreen – DELTA - Electrical switchgear components by SIEMENS-SCHNEIDER - CE conformity - OPTIONAL - Beam type safety light curtains – SICK, LEUZE - Safety PLC (controls entire electrical system, valve, double-hand and pedal) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Locked position switch and panel - Safety block - Protective guards compliant with CE directive TYPE D-TYPE MONOBLOCK FRAME Capacity 80 Tons Table-to-Ram Distance 400 mm Distance Between Side Frames 880 mm Ram Adjustment 85 mm Approx. Press Width 1150 mm Approx. Press Depth 1500 mm Approx. Press Height 2500 mm Table Hole Diameter 190 mm Table Size 600 x 800 mm Die Mounting Hole Diameter 40 mm Ram Size 245 x 410 mm Floor-to-Table Height 850 mm Stroke Adjustment 10–100 mm Strokes per Minute 50 spm Motor Power 7.5 kW Motor Speed 1450 rpm Gbjdpfx Ajvxhb Uohmjn Approx. Weight 6,500 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 125 t, širina mize: 700 mm, dolžina mize: 900 mm, prebojna odprtina v mizi: 210 mm, nastavitev hidravličnega cilindra: 100 mm, Oprema: varnostna svetlobna zapora, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES o Steel construction frame, o Stress relief with vibration will be applied to the frame and welded components. o Parallelism and perpendicularity tolerance between tables in compliance with ISO and DIN standards o Pneumatic clutch and brake combination – OMPI-Italy o Slide supported by 8 guides o Slide equipped with cushion cylinder o Components such as slide, connection rod, and ram nose of cast steel, GS52 o High-strength solid crankshaft – 4140 o Bronze bushing in connection rod (Zr14) o Rear flywheel placement o Spare table set o Hydraulic overload protection o Motorized adjustment of bed-slide o Automatic central lubrication o Pneumatic pedal with latch and double hand control with timer o Electronic counter o PLC control system with touchscreen - DELTA o Electrical switchgear by SIEMENS-SCHNEIDER o CE conformity - OPTIONAL o Finger safety light barriers - SICK, LEUZE o Safety PLC (controls all electric system, valves, double-hand, and pedal) - PILZ o Dual-coil safety valve – GPA, TOPAIR o Locked position switch and control panel o Safety block o Protective guards in accordance with CE regulations. TYPE: D-TYPE MONOBLOCK FRAME Capacity: 125 Ton Distance Bed to Slide: 500 mm Gsdpfx Asvxhqvohmebn Distance Between Uprights: 1000 mm Slide Adjustment: 100 mm Approx. Press Width: 1250 mm Approx. Press Depth: 1750 mm Approx. Press Height: 2850 mm Bed Bore Diameter: 210 mm Bed Size: 700 / 900 mm Die Holding Bore Diameter: 55 mm Slide Size: 340 / 550 mm Table Height from Floor: 850 mm Stroke Adjustment: 10 / 125 mm Strokes per Minute: 50 spm Motor Power: 11 kW Motor Speed: 1450 RPM Approx. Weight: 8,500 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, širina mize: 900 mm, dolžina mize: 1.200 mm, prebojna odprtina v mizi: 260 mm, nastavitev hidravličnega cilindra: 150 mm, nastavitev hoda: 200 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS Gsdpfx Ajvyr Eashmjbn GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief of the frame and welded parts by vibration - Table parallelism and squareness tolerances conform to ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 8 slide guides - Ram with cushioning cylinder - Parts such as ram, connecting rod, and slide block made of cast steel, GS52 - High-strength one-piece crankshaft – 4140 - Bronze bushing in connecting rod (Zr14) - Rear-mounted flywheel - With spare bolster table - Fitted with hydraulic safety devices - Motorized die height adjustment - Automatic central lubrication system - Pneumatic pedal with latch and dual-hand control with timer - With electronic counter - PLC control and touchscreen – DELTA - Electrical switchgear components by SIEMENS-SCHNEIDER - CE certification - OPTIONAL - Light curtain finger protection barriers – SICK, LEUZE - Safety PLC (monitors all electrical system, valves, dual-hand and pedal controls) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Locked position switch and control panel - Safety block - Protective safety guards per CE norms to be included TYPE: D TYPE MONOBLOCK FRAME Capacity: 300 Tons Shut Height (Table to Ram): 530 mm Distance Between Uprights: 1280 mm Ram Adjustment: 150 mm Approx. Press Width: 1700 mm Approx. Press Depth: 2200 mm Approx. Press Height: 3500 mm Table Hole Diameter: 260 mm Table Size: 900 x 1200 mm Die Clamping Slot Diameter: 60 mm Ram Size: 470 x 900 mm Table Height from Floor: 1000 mm Stroke Adjustment: 20–200 mm Strokes per Minute: 38 spm Motor Power: 30 + 2.2 kW Motor Speed: 1450 RPM Approximate Weight: 18,000 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 100 t, širina mize: 700 mm, dolžina mize: 880 mm, višina mize: 850 mm, prebojna odprtina v mizi: 200 mm, nastavitev hidravličnega cilindra: 85 mm, nastavitev hoda: 110 mm, Oprema: varnostna svetlobna zapora, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame, - Stress relief of the frame and welded components via vibration treatment. - Table parallelism and squareness tolerance in accordance with ISO and DIN standards. - Pneumatic clutch and brake combination – OMPI-Italy - Slide guided by 8-point gibs - Slide equipped with cushion cylinder - Components such as slide, connecting rod, and ram head made of GS52 steel casting - High-strength monoblock crankshaft – 4140 - Bronze bushings for connecting rod (Zr14) - Rear-mounted flywheel - Equipped with spare bolster plate - Hydraulic overload protection - Motorized adjustable table-slide - Automatic central lubrication system - Pneumatic pedal with latch and double hand control with timer - Electric counter - PLC application and touchscreen – DELTA - Electrical components: SIEMENS-SCHNEIDER - CE compliance – OPTIONAL - Finger protection light barriers – SICK, LEUZE - Safety PLC (controls all electrical system, valves, double hand control, and pedal) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Locked position switch and control panel Gbjdpsvxhprefx Ahmon - Safety wedge - Protective guards in compliance with CE regulations MODEL: D-TYPE MONOBLOCK FRAME Capacity: 100 Tons Distance Between Table and Slide: 450 mm Gap Between Side Frames: 960 mm Slide Adjustment: 85 mm Approx. Press Width: 1230 mm Approx. Press Depth: 1650 mm Approx. Press Height: 2500 mm Bolster Plate Hole Diameter: 200 mm Bolster Plate Size: 700 x 880 mm Die Clamping Slot Diameter: 50 mm Slide Size: 245 x 410 mm Height from Floor to Table: 850 mm Stroke Adjustment: 10 – 110 mm Strokes Per Minute: 50 spm Motor Power: 11 kW Motor Speed: 1450 rpm Approximate Weight: 7,500 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, širina mize: 800 mm, dolžina mize: 1.070 mm, prebojna odprtina v mizi: 240 mm, nastavitev hidravličnega cilindra: 130 mm, nastavitev hoda: 160 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES • Steel construction frame • Stress relief by vibration for body and welded parts • Parallelism and perpendicularity tolerance between tables according to ISO and DIN standards • Pneumatic clutch and brake combination – OMPI-Italy • Ram mounted on 8 sliding guides • Ram with cushioning cylinder • Ram, connecting rod, and ram nose made from cast steel GS52 • High strength one-piece crankshaft – 4140 • Bronz bushing inside the connecting rod (Zr14) • Rear flywheel configuration • Spare bolster • Hydraulic overload protection • Motorized die height (ram) adjustment • Automatic central lubrication system • Pneumatic pedal with latch and dual-hand control with timer • Electrical counter • PLC control and touch screen – DELTA • Electrical switchgears by SIEMENS-SCHNEIDER • CE application – OPTIONAL • Finger safety light curtains – SICK, LEUZE • Safety PLC (controls all electrical system, valves, dual-hand, and foot pedal) – PILZ • Dual-coil safety valve – GPA , TOPAIR • Locked position switch and control panel • Safety block • Protective guards within CE requirements TYPE: D-TYPE MONOBLOC FRAME Capacity: 200 Tons Distance Table to Ram: 500 mm Distance Between Uprights: 1150 mm Ram Adjustment: 130 mm Approx. Press Width: 1500 mm Approx. Press Depth: 2000 mm Approx. Press Height: 3200 mm Bolster Hole Diameter: 240 mm Bolster Size: 800 x 1070 mm Gsdevyr Diepfx Ahmsbn Die Clamping Slot Diameter: 60 mm Ram Size: 450 x 800 mm Table Height from Floor: 950 mm Stroke Adjustment: 20 / 160 mm Strokes Per Minute: 40 SPM Motor Power: 18.5 + 0.75 kW Motor Speed: 1450 RPM Approximate Weight: 14,000 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 250 t, širina mize: 850 mm, dolžina mize: 1.150 mm, prebojna odprtina v mizi: 240 mm, nastavitev hidravličnega cilindra: 150 mm, nastavitev hoda: 160 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief by vibration for frame and welded parts - Parallelism and perpendicularity tolerance between tables complies with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram guided on 8 slides - Ram cushioning cylinder - Parts such as ram, connecting rod, and slide are steel cast, GS52 - High strength one-piece crankshaft – 4140 - Connecting rod inner bronze (Zr14) - Rear flywheel - Spare bolster plate included - Hydraulic overload protection Gjdpfxjvyr D Aj Ahmjbn - Motorized table-to-ram adjustment - Automatic central lubrication - Pneumatic foot pedal with latch and time-controlled dual-hand operation - Electronic counter - PLC application and touchscreen – DELTA - Electrical switchgear components SIEMENS-SCHNEIDER - CE conformity – OPTIONAL - Finger guard light barriers – SICK, LEUZE - Safety PLC (monitors complete electrical system, valve, dual-hand, and pedal) – PILZ - Double coil safety valve – GPA, TOPAIR - Locked position switch and control panel - Safety block - Protective guards in compliance with CE standards TYPE D-TYPE MONOBLOCK FRAME Capacity 250 Ton Table-to-Ram Distance 520 mm Clearance Between Side Frames 1230 mm Ram Adjustment 150 mm Approx. Press Width 1600 mm Approx. Press Depth 2100 mm Approx. Press Height 3400 mm Table Bore Diameter 240 mm Table Dimensions 850 x 1150 mm Die Clamp Slot Diameter 60 mm Ram Dimensions 470 x 900 mm Floor-to-Table Height 950 mm Stroke Adjustment 20–160 mm Strokes per Minute 40 SPM Motor Power 22 + 2.2 kW Motor Speed 1450 RPM Approximate Weight 16,000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Model: Amada HFE MK2 5012, 4-osna CNC upogibna stiskalnica, 50 ton x 1250 mm Leto: 2015 Tiskalna sila: 50 ton Maks. dolžina upogiba: 1250 mm Hod hodnika: 150 mm Hitrost približevanja: 1 - 100 mm/s Hitrost upogibanja: 1 - 10 mm/s Hitrost vračanja: 1 - 100 mm/s Kapaciteta olja: 55 l Moč motorja: 6 kW Teža: 2550 kg Zaščita: Erwin Sick svetlobna zavesa, stranska in zadnja varnostna ograja z blokado Dimenzije: Dolžina stroja: 2000 mm Globina stroja: 2300 mm Višina stroja: 2300 mm Razdalja med stranskimi okvirji: 1035 mm Širina nosilca: 60 mm Višina mize: 960 mm Odprta višina: 370 mm Globina grla: 100 mm Gbsdpfxeyym Hko Ahmsn

Stanje: rabljeno, Double-column Hydraulic Press SCHÖN Model SH 25 Machine No. 4453 Year of manufacture: 1999 Pressing force: 25 tons Column gap: 500 mm Lateral column opening: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Electrical connection: 380 Volt, 50 Hz - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid traverse and working stroke - Stroke limiter, pressure- or path-dependent - Mechanically adjustable fixed stop - Press force regulation - Pressing time extension 1-10 s (pressure holding time) - Adjustable return stroke speed - Prepared for electric blow-off device (without air valve) - Hydraulic tool safety, manually adjustable via handwheel Required space (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition Gbjdew A Amrjpfx Ahmen

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, MiR 200 Dezember 2018 – gebraucht, aber in einwandfreiem Zustand Länge: 890 mm Breite: 580 mm Höhe: 352 mm Gewicht (ohne Zuladung): 62,5 kg Ladefläche: 600 x 800 mm Nutzlast des Roboters: 200 kg (maximal 5 % Steigung) Zugkraft: 500 kg (siehe separates technisches Datenblatt MiRHook 200) Betriebsdauer: 10 Stunden oder 15 km Maximale Geschwindigkeit vorwärts: 1,1 m/s (4 km/h) / rückwärts: 0,3 m/s (1 km/h) Akku: Li-NMC, 24 V, 40 Ah; Ladezeit: bis zu 3 Stunden (0-80 %: 2 Stunden) WiFi: Dualband Wireless AC/G/N/B Gbodsun Sq Ujpfx Ahmen SICK S300 Laserscanner (2 Stück): 360° Rundumschutz um den Roboter Intel RealSenseTM 3D-Kamera: Objekterkennung vorne, 50-500 mm über dem Boden Ultraschall-Scanner (4 Stück): Erfassung von transparenten Objekten vorne, z. B. Glastüren Sicherheitskonformität und Zulassungen: EN 1525, PLd Kat. 3, ESD-geprüft und CE-zertifiziert Preis: €13.000,00 (+MwSt.)

Stanje: rabljeno, Leto izdelave: 2018, Pressure 315 t Stroke 750 mm Upright width 1700 mm Distance table/ram, max. stroke up, adjustment up 1250 mm Table surface 1600 x 1300 mm Blank holder pressure in table 125 t Blank holder stroke in table 350 mm Blank holder pressure in ram 1000 x 900 t Ram surface 1600 x 1300 mm Lateral upright clearance 1100 mm Speeds down 400 mm/s Speeds up 400 mm/s Working speed 12 - 44 mm/s Oil capacity 2500 l Drive power 35.0 kW Weight 43.50 t Space requirement approx. 3.6 x 3.1 x 6.0 m Gjdpfx Ahevuuf Eemebn Overall height above floor 4.9 m Year of construction 1987 - 2018: new Siemens S7 control New front light barrier (Sick C 4000) Approved for manual loading/unloading according to German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic cushion in table, cutting stroke damping, ram locking, pressure/time/distance-controlled, two-hand operation Press can be inspected in running condition at our warehouse.

Stanje: rabljeno, Double colonne - Presse hydraulique SCHÖN Type UTE/B 50 No. de machine 5509 Année de fabrication : 1971 Force de pressage : 50 tonnes Largeur entre colonnes : 550 mm Passage latéral entre colonnes : 150 mm Surface de la table : 480 x 380 mm Largeur de la rainure en T sur la table : 18 mm Ouverture de la table : Ø 70 mm Surface du coulisseau : 490 x 280 mm Alésage du tenon de serrage : Ø 40 mm Course maximale du coulisseau : 150 mm Hauteur d'installation maximale : 390 mm Hauteur de table au-dessus du sol : 890 mm Godpfev Srfwox Ahmebn Vitesse d'approche rapide : env. 130 mm/sec. Vitesse de travail : env. 20 mm/sec. Vitesse de retour : env. 130 mm/sec. Puissance moteur : 4 kW Raccordement électrique : 380 V, 50 Hz - Réglage continu de la force de pressage - Course rapide et course de travail - Limitation de la course dépendant de la pression ou de la course - Temps de maintien de la pression réglable, prolongation du temps de pressage 0,5-6 s - Butée fixe réglable mécaniquement via volant sur le coulisseau - Barrière immatérielle SICK, type LVU - Compteur de coups - Guidage à double colonne du coulisseau Encombrement (L x l x H) : 1100 mm x 1050 mm x 2320 mm Poids : env. 1,5 tonne En bon état

Stanje: rabljeno, Leto izdelave: 1987, Pressure: 125 t Frame gap: 1050 mm Stroke: 250 mm Total power requirement: 40 kW Machine weight: approx. 8.5 t Space requirement: approx. m DUNKES CNC control type CNC 1000, controlled draw cushion, 4-fold prism guide, SICK light curtain, contact pressure gauge, Shearing shock absorption Gedpfx Ahst Hwuiemobn

Stanje: rabljeno, Leto izdelave: 1990, Pressure 25 t Godpfet Hw Ezox Ahmobn Throat Depth 250 mm Stroke 100 mm Total Power Requirement 7.5 kW Machine Weight approx. 3,200 kg Space Requirement approx. 1,000 x 1,700 x 2,600 mm DUNKES CNC Controlled Hydraulic C-Frame Press Model HZS 25 Year of Manufacture 1990 Serial no. H 90-2018 _____ Pressing Force (Ram) 25 t Table Size 620 x 460 mm Table Height above Floor 820 mm Through Hole in Table 100 mm Maximum Installation Height 350 mm Throat Depth 250 mm Ram Stroke approx. 100 mm Ram Surface Area 500 x 350 mm Ram Bore 32 mm Working Speeds: Rapid Advance/Retract 400/400 mm/s At Partial Load / At Full Load 50 / 18 mm/s Total Drive Power approx. 7.5 kW - 380 V – 50 Hz Weight approx. 3,200 kg Machine Dimensions (L x W x H) 1,000 x 1,700 x 2,600 mm Accessories / Special Equipment: • DUNKES program control type CNC 100 with data entry panel for pressure setting, pressure/time switching, stroke upper/lower limit, rapid traverse and working speeds, as well as with digital display for press force, ram travel, pressing time, program number. Storage of up to x tool programs, SIEMENS S5 PLC, teach-in button • Hydraulic shock absorption installed in press cylinder • SICK – light curtain and two-hand safety control, • Intermediate tables mounted, control cabinet fitted • Overrun time 85 ms / overrun distance 30 mm, safety distance 170 mm Condition: good to very good – can be demonstrated under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. We always have a selection of hydraulic presses in stock, please contact us for further options.

Stanje: rabljeno, Leto izdelave: 1985, Pressure 63 t Clear width 1350 mm Stroke 300 mm Total power requirement 16 kW Machine weight approx. 10 t Space requirement approx. 2.0 x 1.8 x 3.4 m H Y D R A P Hydraulic double-column press (embossing press with sliding table) Model HPDb 63 Year of manufacture: 1985 Serial No. H 40/5273 Press force (top ram): 63 t Return force: 7 t Stroke approx.: 300 mm Table size: 1200 x 500 mm Ram plate: 1200 x 500 mm Max. installation height (without exchange device): approx. 400 mm Stroke speed up / down (at full load): 400/400 or 16 mm/sec Clearance between columns (front): 1350 mm Clearance between columns (side): 350 mm Ejector in ram, force/stroke: 1.2 t / 19 mm Pump drive: 11 kW Total drive approx.: 16 kW – 380 V – 50 Hz Weight approx.: 10,000 kg Machine dimensions (W x D x H): 2.0 x 1.8 x 3.4 m (+ swing table) Accessories / Special Features Sturdy double-column frame press with adjustable four-point prism guides, equipped with: Gedpfx Aet Hwxushmebn • Hydro-pneumatic sliding table (approx. 625 mm transverse stroke) with two clamping surfaces for holding the pressed parts and lower tool. These are positioned under the ram for the pressing process and then moved to a stacking device at the rear after pressing. The table then returns to the starting station. This feature can also be easily removed or modified. • CNC press control (Siemens S5) with monitor for input of all relevant process data and storage of tool data for easier and quicker machine changeovers, as well as monitoring of part transport. Swing table holder included. • SICK light barriers fitted at the front of the press and loading station. • Ram equipped with electro-motorised depth stop (300 mm stroke) and hydraulic tool clamping system, also with hydraulic ejector integrated. • Pressure and oil temperature display, piece counter, foot switch, two-hand operation, central lubrication, hydraulic oil circulation cooling, stand-alone electrical cabinet, etc. The machine was used for pressing in edge trims on cylinder head gaskets. Condition: Good to very good – ready for demonstration, under power Delivery: ex stock, as inspected Payment: strictly net, upon receipt of invoice

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Sortieranlage von ITO Pallpack. Wir bieten derzeit die seltene Gelegenheit, eine nahezu neuwertige Sortieranlage von ITO Pallpack zu erwerben. Die Anlage wurde im Juni 2022 installiert und war im E-Commerce für das Sortieren von kleinen bis mittelgroßen Paketen im Einsatz. Diese Lösung ist ideal für wachsende Unternehmen, die ihre Sortierprozesse automatisieren und gleichzeitig genügend Kapazität für zukünftiges Wachstum sicherstellen möchten. Die Anlage ist vollständig ausgestattet und umfasst: - 12 Meter Förderband zum Aufgeben von Paketen aus Packstationen/-bereichen - Schrägförderer mit Paketvereinzelungsfunktion - SICK-Optik zur Barcodeerkennung - 10 Sortierkanäle mit automatischen Schieberarmen - Kompressoranlage zur Versorgung der Schieberarme mit Druckluft - Komplett ausgestatteter Schaltschrank mit SPS-/Steuerungssystem - Trotz ihrer kompakten Bauweise erreicht die Anlage eine Durchsatzleistung von mehr als 1.000 Stück pro Stunde mit hoher Präzision. Derzeit ist sie für Artikel bis ca. 6 kg ausgelegt, das Antriebssystem kann jedoch auf höhere Gewichte aufgerüstet werden. Wesentliche technische Daten: - Gesamtlänge der Anlage: 36,5 m - Bandbreite: 350 mm - Antrieb durch hochwertige SEW Eurodrive-Motoren - Die Sortieranlage ist mit einem vollständigen Schaltschrank ausgestattet und kann in Ihr WMS- und/oder ERP-System integriert werden. Die aktuelle Konfiguration ist U-förmig aufgebaut. Alternative Layouts sind möglich – weitere Vorschläge finden Sie im Dokument unter „Downloadbare Dokumente“. Übersicht Gbedpjvca Easfx Ahmon Baujahr: 2022 Abmessungen: 36 m (Gesamtlänge) Technische Informationen Hersteller: ITO Pallpack Baujahr: 2022 Leistung: 1.400 Stück/Stunde Max. Gewicht pro Artikel: 6 kg Gesamtlänge: 36.484 mm Bandbreite: 350 mm Antrieb: SEW Eurodrive Anzahl Sortierkanäle: 10 Innenbreite der Sortierkanäle: 700 mm Optik: SICK CLV650 Kompressor: Kaeser Aircenter SX6 Baujahr Kompressor: 2022 Letzte Wartung (Kompressor und Anlage): Q1 – 2023 Sofort verfügbar. Versand und Installation erfolgen gegen Aufpreis. Die Installation wird in Zusammenarbeit mit ITO Pallpack durchgeführt, sodass eine Anpassung an Ihre Räumlichkeiten und Warenstruktur möglich ist.

Stanje: rabljeno, Leto izdelave: 1984,

Stanje: rabljeno, Leto izdelave: 1978, Pressure: 63 t Throat depth: 280 mm Godpfxehbalnj Ahmsbn Stroke: 160 mm Table area: 560 x 500 mm Ram area: 280 x 280 mm Installation height: 400 mm Oil capacity: approx. 360 l Total power requirement: 22 kW Machine weight: approx. 4 t Space requirements: approx. 1.45 x 1.75 x 2.67 m - Work area enclosure with SICK light curtain - Large ram with ejector and pin clamping piece - Foot switch - Motorized depth stop in the cylinder

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Unisign Uniport 6000 Year of manufacture: 2010 / Commissioned: 2011 Control system: Siemens 840 D Travel distances: X = 10,000 mm, Y = 1,500 mm Extended spindle slide stroke: Z = 1,000 mm Increased clearance height: 1,000 mm Clearance width: 1,500 mm Main drive: 36 kW, n = 6,000 rpm, 720 Nm 2-stage gearbox 1:4 Taper: SK 50 Machining capacity in C45: Core drilling D=120mm, Thread tapping M55, Milling 100cm³/min Gantry construction with movable portal bridge and stationary clamping table. Clamping table equipped with crosswise clamping beams at 750 mm intervals. Standard platen fields omitted. Hydraulic clamping system with clamping bridges for axle machining incl. hydraulic unit Angular drilling & milling head, n = 4,000 rpm, SK50 High accuracy and stability due to Hirth coupling Automatic tool change into the angular head Measuring probe RWP20.50-M Pendulum operation Safety fence with light curtains, Sick brand Clamping table with crosswise clamping beams every 750 mm Tool chain magazine on portal column with 30 pockets Machine cooling system Water/air heat exchanger integrated in control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Gbsdpfx Ahjymb Easmjn Makrolon curtains on both sides of the portal bridge, motorized height adjustment Partition wall with inspection window Chip conveyor with hinged belt design Mounting and alignment elements

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1302981, skupna masa: 280 kg, model krmilnika: KR C4 NA UL, TEHNIČNI PODATKI Krmiljenje Model krmiljenja: KR C4 NA UL Serijska številka krmiljenja: N 3.056.661 Griper Izvedba: vakuumski griper Pogon: posamezna cona PODROBNOSTI STROJA Skupna teža: 280 kg Obratovalne ure: ca. 500 h Gbsdpfxey Hizdo Ahmen OPREMA Teach Pendant (ročna kontrola) prisoten in delujoč Varnostna ograja upravljana preko Siemens PLC Sick laserski skener, 2 kosa Svetlobne zavese, 4 kosi

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R201204B9, skupna masa: 252 kg, Oprema: varnostna svetlobna zapora, TEHNIČNI PODATKI Krmiljenje Model krmiljenja: A05B-2611-B382 Serijska številka krmiljenja: E20110087 Griper Izvedba: vakuumski griper Pogon: enoconski PODROBNOSTI O STROJU Gsdpfey Hiy Tjx Ahmjbn Skupna teža: 252 kg Delovne ure: pribl. 1.000 h OPREMA Varnostna ograja prek Allen Bradley PLC Sick laserski skener, 2 kosa Svetlobne zavese, 4 kosi