Saki Bf-Comet-C nakup rabljenega (55.186)

Stanje: zelo dobro (rabljeno), Weiss Model: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Unit: Touchpanel All control and operating commands can be activated on the "Touchpanel" control unit by simply touching the function icons. Adjustable Feet To compensate for floor unevenness and to ensure sufficient ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is fitted with feedthroughs on the right and left sides. These allow measuring cables and test fixtures to be routed into the test chamber. Feedthroughs installed as standard: R1: Nominal Width 125 mm L1: Nominal Width 85 mm Volume: 335 liters Test Chamber Internal Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for Temperature Tests: Minimum Temperature: –72°C Maximum Temperature: +180°C Temperature Deviation, over time: ± 0.1 to ± 0.5 K Temperature Uniformity, spatial: ± 0.5 to ± 1.5 K Temperature Change Rate, Cooling: 3 K/min Temperature Change Rate, Heating: 3 K/min Data for Climate Tests: Temperature Range: +10°C to +95°C Dew Point Range: -3°C to +94°C Humidity Range: 10 to 98% r.h. Temperature Deviation, over time: ± 0.1 to ± 0.3 K Temperature Uniformity, spatial: ± 0.5 to ± 1 K Humidity Deviation, over time: ± 1 to ± 3% r.h. Operating Data: Test Chamber Lighting: Halogen bulbs 2 x 24V, 50W Rated Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Current: 16 A Rated Power: 4.9 kW Circuit Breaker (on-site): 16 A slow-blow Refrigerant: R-452A/R23 Weight: approx. 585 kg For your security as the buyer, please note the following information! Laedpsv Sr Hzefx Abxoc The following items are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and information reserved!) Feel free to contact us by phone for further questions.

Stanje: dober (rabljeno), Type: TS -70/1000-10 For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: • Multi-touch control system • USB and Ethernet interfaces • Cable feedthroughs for test cables – 4 × Ø 125 mm • Safety temperature limiter Fields of application: • Environmental and endurance testing • Temperature cycling tests (stress screening) • Quality assurance and R&D • Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: • Height: approx. 1000 mm • Width: approx. 860 mm • Depth: approx. 1100 mm External dimensions: • Height: approx. 1950 mm • Width: approx. 1270 mm • Depth: approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Ljdpjxdi Ezofx Abxjac Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 3.000 m³/h, skupna širina: 2.200 mm, skupna dolžina: 10.600 mm, skupna višina: 2.350 mm, Biofilter system for odour reduction – bioteg MCBF 3000 QSW For sale is a biofilter system for exhaust air cleaning and odour reduction, model bioteg MCBF 3000 QSW, designed for an exhaust air flow rate of up to 3,000 m³/h. The system was decommissioned due to regulatory requirements, is technically complete, and was specifically engineered for fully automatic continuous operation outdoors. Lsdpfxoyhwace Abxsac The unit consists of a double-walled biofilter container (outer shell steel, inner lining PE-HD), a pre-connected exhaust air humidifier (crossflow scrubber), a radial fan with frequency inverter, as well as a separate technical compartment with control cabinet. The filter bed is filled with approximately 30 m³ of durable, longitudinally split root wood, offering high dimensional stability and minimal compaction. The biofilter system complies with VDI Guideline 3477 and ATV Data Sheet 204, delivering high purification performance (including up to 97% odour reduction, 98% H₂S, 97% NH₃ under design conditions). Maintenance requirements are low (regular visual checks, annual inspection). Typical areas of application: Waste treatment plants, composting plants, wastewater treatment plants, industrial exhaust air purification, municipal disposal enterprises. Further technical documentation, dimensions, performance data, and inspections are available upon request.

Stanje: rabljeno, Leto izdelave: 2014, System with 2x ABB FlexPicker Robots IRB360 M2004 We have a total of 5 systems available! The price is per system! Overall dimensions: L: 7800 mm W: 2300 mm H: 2500 mm For more details and scope of delivery, see the photos. Technical data as per the nameplate. Laodpfx Abjtzxgpsxsc Item condition: used, untested Sample pictures Viewing in Rietberg is possible! For further questions, you can contact us by email. Sale is exclusively to commercial customers for business purposes and without any warranty for material or legal defects! By making a purchase, you confirm that you are acting in a commercial or freelance capacity. Otherwise, you are violating our terms and conditions!

Leto izdelave: 2019, stanje: novo, Brand: C&U Group Shanghai Bearing Co Ltd Model: TM6307/41RS Year of manufacture: Unused Weight (kg) approx.: 6,790 net Ljdpoqa Anqjfx Abxsac Quantity in stock: 17,350 (approx.) Country of manufacture: China Notes: Contact us for minimum order quantity Terms of sale: Contact us for minimum order quantity

Stanje: dober (rabljeno), Transformator, Trafo, Pretvornik, Trofazni avtotransformator Ledpfx Absb S Htdjxjac - Vhod: 220 V - Izhod: 29,5 V 17 A - Tehnični podatki: glej fotografije - Količina: na voljo 2 kosa - Cena: na kos - Dimenzije: 140/120/V120 mm - Teža: 12 kg

Stanje: rabljeno, Face mill arbors, boring heads, spindle heads, drilling heads, parting-off drilling heads, parting-off heads, spindle drilling heads, out-boring heads, universal drilling heads, boring tools, facing heads, facing and boring heads - Manufacturer: ER MEX C-H, face mill arbors and boring head MK4 - Model: D-210 Lodeu S Tc Eopfx Abxjac - Dimensions: Ø 96 x 385 mm - Weight: 8.3 kg

Stanje: dober (rabljeno), Hydraulic pump, oil pump, gear pump Laedpfx Abob A Siysxsc - Shaft mounting: - Price: per unit - Quantity: 2 available - Dimensions: 170/120/110 mm - Weight: 4.3 kg

Stanje: dober (rabljeno), Hydraulic pump, oil pump, gear pump Lasdpfx Aeb A Sizebxsc -Shaft mounting: -Dimensions: 180/160/120 mm -Weight: 4.5 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, globina vrtanja: 700 mm, potovalna razdalja osi X: 1.600 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.600 mm, hitrost vretena (min.): 6.000 obr/min, premer vrtanja: 40 mm, dolžina mize: 1.500 mm, širina mize: 1.250 mm, obremenitev mize: 10.000 kg, Leto izdelave: 2001 Krmiljenje: Heidenhain TNC 430 X: 1600 mm Y: 1200 mm Laodpjxu Dkgefx Abxec Z: 1600 mm W: 500 mm Miza: 1500x1250 mm, 10T B-os, A-os z nihajno +/- 19 stopinj Stroj ima popolno ohišje Transporter odrezkov z hladilno napravo Vpenjanje orodja SK50 Menjalnik orodij za 20 kosov

Stanje: novo, lastna masa: 844 kg, največja dovoljena obremenitev: 2.656 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.350 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,8 m³, barva: srebrn, gradbena višina: 990 mm, delovna širina: 1.860 mm, Hydraulics, automatic reversing mechanism, hot-dip galvanisation, roof window, incl. composite floor (ultra-reinforced honeycomb core floor) – extremely durable and load-resistant! *IMMEDIATELY AVAILABLE* incl. composite floor (ultra-reinforced honeycomb core floor) – extremely durable and long-lasting! Technical data: - Type: New vehicle with 2 years TÜV (roadworthiness) from initial registration - Availability: Immediately available!! - TÜV: 2 years - Floor: Composite floor - Permissible total weight: 3,500 kg - Unladen weight: 844 kg - Payload: 2,656 kg - Internal dimensions: 335 x 180 x 30 cm (L x W x H) - External dimensions: 468 x 186 x 99 cm - Loading height: 69 cm - Tyres: 195/50R13C steel rims - Brake: Yes - Jockey wheel: Yes, automatic 500 kg - Incl. vehicle documents (registration) - 100 km/h: optional at extra cost Standard equipment: - New side hinge system incl. easy mounting options for, among others, a load securing net - Double-walled anodised aluminium side boards - All side boards fold-down on all sides - All side boards removable - Stable welded steel frame - Frame fully hot-dip galvanised by immersion - Multiple robust cross beams for high point load capacity - Additional continuously welded longitudinal beams - 6 recessed lashing rings (1000DaN/kg) – TÜV certified - Lashing hooks on frame - Automatic reversing mechanism - KNOTT overrun hitch and parking brake - Robust eccentric latches - Reinforced, bolted V-shaped drawbar - 13-pin plug - Reversing spotlight - Large-sized safety lighting - Integrated rear fog light - Rear frame lighting recessed - Central automatic jockey wheel Special equipment included: - Parabolic suspension incl. shock absorbers for 100km/h fitted instead of rubber-suspended axles - Parabolic axle with shock absorbers for maximum driving comfort! - Composite floor (honeycomb core plastic floor): Composite is built up in multiple layers, similar to a lasagna, from various fibres. The result is a sustainable, extremely stable, and lightweight panel. The core consists of a honeycomb structure, faced on both sides with a protective outer layer. The complete structure is fused to create a highly stable unit. The panel manufacturer is from the anti-ballistics industry, hence the outer shell is similar to that of a bulletproof vest. Lasdpfx Abeu Hr Nvjxoc At HAPERT trailers, all innovations are thoroughly tested, including the new composite floor. It has been rigorously tested under normal operating conditions for impact and tensile strength, shear force, abrasion, and resistance to weather. Watch the load test: ?v=_gpat0vbiTc Optional accessories available: - Manual emergency pump fitted in case of electric operation (optional at extra cost) - Loading ramp package: 2x reinforced integrated aluminium loading ramps - 2 rotatable reinforced crank supports - Car2Trailer charging system (permanent charging of tipping trailer’s battery via towing vehicle) - Tall front mesh, 70cm - Tarpaulin & frame in various heights - Supports, mesh sides, side extension boards, nets, etc. New vehicle with warranty and TÜV. We are happy to offer tailored financing! Descriptions and images are copyright protected!! More than 800 trailers immediately available! We have over 30 years’ experience as specialists & in servicing and repairs for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix.

Stanje: novo, Podajalnik blokov za stiskalnico je zanesljiv stroj, primeren za razkladanje kompozitnih paletnih blokov za proizvodnjo paletnih nog. Model PBF lahko hkrati razklada z dveh palet kompozitnih blokov na en ali dva transportna trakova. Tako kot ostali portali roboti je tudi PBF uporabniku prijazen in ima enak uporabniški vmesnik kot ostala oprema znamke Mychrome. List za prijemanje se odstrani samodejno in odloži v odpadni zabojnik. Ljdpfjwduuwsx Abxjac Tehnične specifikacije stroja: Standardna zmogljivost Število operaterjev: 0 Dolžina: 5 m Širina: 2,5 m Višina: 3 m Moč: 10 kW, 3x400 V+N Pnevmatski sistem: 7 bar suhega stisnjenega zraka: 100 L/min Potrebno je napolniti in preveriti: Posoda za mazalno olje Zmogljivost stroja: 36 blokov na minuto (en tip blokov) Standardna oprema: - 1 portalni robot z operatersko ploščo - 1 vakuumski prijemalec

Stanje: rabljeno, številka stroja/vozila: WSM00000005144861, konfiguracija osi: 3 osi, prva registracija: 07/2015, dolžina tovornega prostora: 13.410 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 2.650 mm, vzmetenje: zrak, velikost pnevmatike: 385/65, barva: drugo, Leto izdelave: 2015, = Dodatne opcije in oprema = - Hladilni motor - Dvižna os Lodpfx Abeydk N Asxsac - Zračno vzmetenje - Kolutne zavore = Dodatne informacije = Dimenzija pnevmatik: 385/65 Znamka osi: Schmitz Hladilni motor: diesel in električni (16.312 delovnih ur na diesel; 1.485 električnih)

Stanje: rabljeno, Leto izdelave: 2022, Lighting/warning signs, towed, / height adjustment / _____ / potato haulm topper with longitudinal chassis / 4 / rows / support wheels / potato haulm deflector plates / specially arranged flails / plus longitudinal travel device / Ledjqrrynspfx Abxoac

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 11.000 km, moč: 310 kW (421,48 KM), prva registracija: 12/2023, vrsta goriva: dizel, konfiguracija osi: 8x4, gorivo: dizel, zavore: zaviranje z motorjem, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: parabolično listje (vzmet), dolžina tovornega prostora: 6.300 mm, Leto izdelave: 2023, obratovalne ure: 750 h, Oprema: žerjav, = Dodatne možnosti in oprema = - Ojačevalnik zavor - Senčnik - Ksenonska osvetlitev - Kardanska gred (PTO) = Dodatne informacije = Konfiguracija osi Vzmetenje: parabolično vzmetenje Prednja os 1: krmiljena Prednja os 2: krmiljena Zadnja os 1: redukcija: zunanje planetne osi Zadnja os 2: redukcija: zunanje planetne osi Teže Lastna teža: 21.000 kg Nosilnost: 10.925 kg Dovoljena skupna masa: 32.000 kg Funkcionalno Ledpfsyll S Usx Abxjac Znamka nadgradnje: HMF 4020 K6 + JIB FJ 600-K4 CE oznaka: da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro

Stanje: dober (rabljeno), Leto izdelave: 2019, C and C Cresco Ovitovalni stroj za palete Serijska številka: C1900145M Laodpotu N Dxefx Abxoc Leto izdelave: 2019, ovijalni stroj za palete, premer vrtljive mize 1650 mm, nastavljiva hitrost vrtenja in napetost folije, nosilnost 2000 kg, priložena rampa, enofazni priklop (1Ph)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, delovna višina: 650 mm, številka stroja/vozila: SM20215245, Oprema: dokumentacija / priročnik, Urejeni Lantech C-1000, desni Lsdpfst Dn Hqex Abxsac

Leto izdelave: 2021, stanje: kot nova (razstavni stroj), Max. drilling diameter 50 mm Max. throat depth 1600 mm Min.–Max. distance spindle–base plate 350–1220 mm Spindle speeds (16) 25–2000 RPM Spindle taper MK5 Spindle travel 320 mm Spindle feed (16) 0.04–3.2 mm/rev Travelling distance of drill head 1250 mm Ledpfx Aboh H Edisxjac Table dimensions 500×630 mm Motor power 4 kW

Leto izdelave: 2013, stanje: dober (rabljeno), Cpack stroj za zapiranje sendvičev Model: SS3000 Laedpfefv Sprjx Abxec Serijska številka: 4068 Leto izdelave: 2013, iz nerjavečega jekla, idealen za zapiranje sendvičev različnih velikosti v plastične posodice (''sandwich wedges''), do 60 izdelkov na minuto, nastavljiva hitrost in temperaturni regulatorji, trenutno nastavljen za posodice dimenzij 165 mm x 66 mm, skupna dolžina 2200 mm, premičen, 1-fazni priklop

Stanje: rabljeno, Ta oglas je za C Technologies IN-VPE-Flows Flowpipe. Ljdpfsxhfqujx Abxjac Enota je v popolnoma delujočem stanju in pripravljena za takojšnjo uporabo. 1. Sistemi CTech™ FlowVPE ali FlowVPX To so UV–Vis spektrofotometri s spremenljivo dolžino optične poti, zasnovani za inline spremljanje procesov v bioprocesiranju. FlowVPE sistem omogoča prilagodljive meritvene konfiguracije in skalabilnost od laboratorija do proizvodnje, medtem ko je FlowVPX sistem prilagojen za GMP okolja z možnostmi skladnosti.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Dozator za vroče izdelke, priključi se na kuhalno posodo in črpa v vrečke z nastavljeno, nastavljivo težo. Zračno upravljan spenjač za zapiranje vrečke. Končane zaprte vrečke lahko damo v bobnasti hladilnik za ohlajanje. Stroj je v dobrem delovnem stanju in pripravljen za dostavo. Enofazni električni priključek 240 voltov 50 Hz. Potreben je dovod zraka. Laodpfexgutpjx Abxjc

Stanje: novo, Leto izdelave: 2026, Oy Foudila Ab je podjetje iz Kaskinena na Finskem z več kot 45-letnimi izkušnjami na področju opreme za ravnanje z lesom. V zadnjih 15 letih smo dejavni tudi v paletni industriji in smo skozi leta razvili številne stroje za zabijanje žebljev, avtomatsko podajanje lesa in zlaganje. Proizvajamo tako standardne stroje kot tudi rešitve po meri za potrebe strank. CBF Block Feeder je prilagodljiv, kompakten in učinkovit podajalnik blokov za proizvodnjo palet. Ima uporabniku prijazen program. Stroj dvigne eno vrsto blokov naenkrat iz sklada blokov. Poleg tega stroj samodejno odstrani papir ali karton, če se ta pojavi v skladu. Upravljanje stroja poteka preko 10" zaslona na dotik. Krmilni sistem Beckhoff. Dolžina hoda stroja je nastavljiva glede na zahteve kupca, kar omogoča pobiranje blokov iz več paketov/skladov. Kapaciteta: - Približno 5 delovnih ciklov na minuto Dimenzije stroja: - Dolžina 2000–6000 mm, širina 2500 mm, višina 2900 mm Laodpsh Dpxdjfx Abxsc Stroj je CE-označen. Stroj je lahko opremljen s trakovnim transporterjem in številnimi drugimi dodatki. Za več informacij, slike ali video materiale nas kontaktirajte.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, moč: 286 kW (388,85 KM), vrsta goriva: dizel, vrtljajska hitrost (min.): 1.900 obr/min, Tehnični podatki za motor Deutz tip BF6M1015C Splošne specifikacije Število valjev: 6 Premer/tek: 132 mm / 145 mm Delovna prostornina: 11,91 litra Kompresijsko razmerje: 16,5 Največje nazivno število vrtljajev: 2100 vrt/min Povprečna hitrost bata: 10,15 m/s Nazivne moči za motorje gradbene mehanizacije Skupina I: Moč: 300 kW Vrtljaji: 1900 vrt/min Povprečni efektivni tlak: 14,4 bar Skupina III: Moč: 273 kW Vrtljaji: 1900 vrt/min Povprečni efektivni tlak: 13,1 bar Dodatni parametri Laodpfx Aoyzaaysbxjc Največji navor: 1980 Nm Pri vrtljajih: 1200 vrt/min Minimalno število vrtljajev v prostem teku: 550 vrt/min Teža (po DIN 70020, del 7A): 850 kg Ti povzetki tehničnih podatkov zagotavljajo celovit pregled specifikacij in zmogljivostnih vrednosti motorja BF6M1015C.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.660 mm, pomik osi Y: 760 mm, pomik po osi Z: 660 mm, obremenitev mize: 1.200 kg, največja hitrost vrtenja: 8.000 obr/min, Nižja meja cene ni določena - zagotovljena prodaja najboljšemu ponudniku! TEHNIČNI PODATKI Pomik X-os: 1.660 mm Laedpfx Abezb D N Roxec Pomik Y-os: 760 mm Pomik Z-os: 660 mm Velikost mize: 760 x 2.000 mm Največja obremenitev mize: 1.200 kg Vpenjalo orodja: SK 40 Menjalec orodja: 2 x 24 Največji premer orodja: 80 mm Največji premer orodja pri prosti sosednji omarici: 110 mm Največja dolžina orodja: 350 mm Hitri pomik (X/Y/Z): 24 / 24 / 30 m/min PODROBNOSTI O STROJU Krmilnik: MAZATROL M-PLUS Dimenzije & teža Poraba prostora: pribl. 6,0 x 4,0 x 3,5 m Teža stroja: pribl. 8,1 t Skupna potrebna moč: 32,8 kVA Stroj je bil redno servisiran.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, številka stroja/vozila: 351.10.001.16, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 3.000 mm, širina obdelovanca (maks.): 920 mm, višina obdelovanca (maks.): 50 mm, globina vrtanja: 55 mm, TECHNICAL DETAILS Ljdpszcdkwefx Abxoac Maximum drilling depth, horizontal: 30 mm Maximum drilling depth, vertical: 55 mm Horizontal spindles: 6 Vertical spindles: 9 Distance between horizontal spindles: 32 mm Distance between vertical spindles: 32 mm Maximum diameter of horizontal spindles: 15 mm Maximum diameter of vertical spindle: 8 x 15 mm, 1 x 35 mm Workpiece dimensions X-axis: 280 – 3,000 mm Workpiece dimensions Y-axis: 180 – 920 mm Workpiece dimensions Z-axis: 10 – 50 mm Travel speed X-axis: 25 m/min Travel speed Y-axis: 25 m/min Travel speed Z-axis: 15 m/min Drill head motor power: 1.5 kW Drill head speed: 3,600 rpm Circular saw unit speed: 9,000 rpm Milling spindle speed: 24,000 rpm Maximum circular saw blade diameter: 100 mm MACHINE DETAILS Operating / ambient temperature: 15 – 40 °C Relative humidity: max. 90% at 20 °C Operating pressure: 6 – 8 bar Nominal compressed air consumption: 60 Nl/min Air consumption: 1,650 m³/h Compressed air supply diameter: 5/8" Internal diameter: 16 mm Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,605 x 1,950 mm Weight: 850 kg Operating hours (estimated): approx. 800 h EQUIPMENT Additional support roller tables