Ravnalni Valj Schubert - Wml17/80/1450 nakup rabljenega (20.942)

Stanje: rabljeno, Leto izdelave: 2021, nosilnost: 8.000 kg, dvižna višina: 4.215 mm, skupna dolžina: 6.150 mm, · Load centre distance: 900 mm · Seat height, EGO cab: 1440 mm · Load distance: 760 mm · Track width (c-c), front – rear: 1500 – 1360 mm · Turning radius, outside: 3700 mm · Turning radius, inside: 300 mm · Height with cab tilted, max. EGO cab: 3020 mm · Width with cab tilted, max. EGO cab: 3225 mm · Minimum aisle width for 90° stacking: 6450 mm · Lift height: 3500 mm · Mast tilt, forward – backward α – β: 6-9 degrees Bwsdpfx Acey Rawdemsn · Axle load front, unladen: 5500 kg · Axle load front, with rated load: 18400 kg · Axle load rear, unladen: 6200 kg · Axle load rear, with rated load: 1300 kg · Brake size, front – rear: 8.25-R15 – 8.25-R15 inches · Air pressure, front – rear: 1.0 – 1.0 MPa · Steering system type – control: Hydraulic servo, steering wheel · Service brake system type – braked wheels: Oil-cooled multi-disc brakes – driving wheels · Parking brake system type – braked wheels: Dry, spring-loaded disc brake – driving wheels · Hydraulic pressure: Max. 20 MPa · Hydraulic oil volume: 155 l · Drive axle – type: Differential and hub reduction · Drive motor, rated duty: 2 x 11 kW · Speed control, principle – levels: High-frequency MOSFET, AC – stepless · Hydraulic pump motor, duty cycle – load factor: 1 x 42 kW – S3 15% · Brake pump motor, duty cycle – load factor: 1 x 4.2 kW – S3 15% · Pump monitoring, principle – level: High-frequency MOSFET, AC – stepless · Lifting speed, no load: 0.32 m/s · with rated load: 0.31 m/s · Lowering speed, no load: 0.45 m/s · with rated load: 0.50 m/s · Travel speed, F/R, no load: 15 km/h · with rated load: 13 km/h · Max. gradeability, no load: 37% · with rated load: 21% · Gradeability at 2 km/h, no load: 29% · with rated load: 16% · Tractive force: 40 kN

Stanje: rabljeno, Leto izdelave: 2021, nosilnost: 8.000 kg, dvižna višina: 4.215 mm, skupna dolžina: 6.550 mm, · Load centre distance: 900 mm · Seat height, EGO cab: 1440 mm · Load distance: 760 mm · Track width (c-c), front – rear: 1500 – 1360 mm · Turning radius, outside: 3700 mm · Turning radius, inside: 300 mm Bwedpfxsy Ravte Acmen · Height with cab tilted, max. EGO cab: 3020 mm · Width with cab tilted, max. EGO cab: 3225 mm · Minimum aisle width for 90° stacking: 6450 mm · Lift height: 3500 mm · Mast tilt, forward – backward α – β: 6-9 degrees · Axle load front, unladen: 5500 kg · Axle load front, with rated load: 18400 kg · Axle load rear, unladen: 6200 kg · Axle load rear, with rated load: 1300 kg · Brake size, front – rear: 8.25-R15 – 8.25-R15 inches · Air pressure, front – rear: 1.0 – 1.0 MPa · Steering system type – control: Hydraulic servo, steering wheel · Service brake system type – braked wheels: Oil-cooled multi-disc brakes – driving wheels · Parking brake system type – braked wheels: Dry, spring-loaded disc brake – driving wheels · Hydraulic pressure: Max. 20 MPa · Hydraulic oil volume: 155 l · Drive axle – type: Differential and hub reduction · Drive motor, rated duty: 2 x 11 kW · Speed control, principle – levels: High-frequency MOSFET, AC – stepless · Hydraulic pump motor, duty cycle – load factor: 1 x 42 kW – S3 15% · Brake pump motor, duty cycle – load factor: 1 x 4.2 kW – S3 15% · Pump monitoring, principle – level: High-frequency MOSFET, AC – stepless · Lifting speed, no load: 0.32 m/s · with rated load: 0.31 m/s · Lowering speed, no load: 0.45 m/s · with rated load: 0.50 m/s · Travel speed, F/R, no load: 15 km/h · with rated load: 13 km/h · Max. gradeability, no load: 37% · with rated load: 21% · Gradeability at 2 km/h, no load: 29% · with rated load: 16% · Tractive force: 40 kN

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, Convoyeur à rouleaux Transnorm aligné à droite 3470-1830-1450 RA1855 Fabricant : Transnorm Dimensions de base : Construction conique, 3470x1160-1830 mm Longueur : 3470 mm Largeur nominale/extérieure (NB): 1160-1830 mm Largeur des rouleaux (RB): 160-450 mm & 640-1000 mm Hauteur du châssis : 290 mm Hauteur actuellement réglée : 640 mm Hauteur du guidage latéral : 410 mm Largeur (hauteur) de la bande latérale : 300 mm Diamètre des rouleaux : 50 mm Entraxe des rouleaux : 65 mm Inclut 8 pieds de soutien Moteur MOVI-Mot 3x300-500V 1,5 kW Vitesse de convoyage : Contenu de la livraison : avec supports (merci de nous consulter si besoin) Pour un conseil personnalisé et professionnel, contactez-nous simplement. Contactez-nous par téléphone ou par e-mail. Nous vous aidons volontiers dans la planification et la réalisation de vos projets. Bwedpfx Acjk Abhlemon Nous attendons votre appel avec impatience. Cordialement, Votre équipe Dr. Sonntag GmbH & Co. KG Votre spécialiste et interlocuteur pour l’intralogistique.

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Roller Curve Conveyor Roller Curve 180°-900-800 IR800 RA2233 Technical Data: Manufacturer: Transnorm Type: TS 2712 Roller Curve 180° Year of manufacture: 2001 Condition: Good (used) Motor: Fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 900 mm Length between frames: 800 mm Motor type: SEW Geared Motor, R17DT71D4/TH Motor power: V 380–500, kW 0.37 Drive: Center drive with chain transmission Conveying speed: Please contact us Weight: 260 kg Scope of delivery: Without supports Optionally available: - Supports - Side guides (one-sided or double-sided) - Frequency converter for stepless speed adjustment - Custom length (longer/shorter) - Additional roller conveyors/roller curves with chain transmission Bwedsrixkbopfx Acmsn Prices net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For personalised, expert advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2008, Transnorm Roller Curve Combination, Right and Left 45° - 1200-900-800 IR800 1551 mm RA2232 Manufacturer: Transnorm Conveying direction: Curve combination, right-running / left-running Roller width (RB): 800 mm conical, plastic-coated Nominal/Outside width (NB): 900 mm Inner radius (IR): 800 mm Length of centre section: 1200 mm Offset: 1551 mm Frame height: 80 mm Total height incl. motor: 450 mm Drive/Transmission: Chain Electrical data: 300-500 V, 0.37 kW Bwjdjrixi Topfx Acmjn Geared motor: SEW, R17DT71D4/TH Conveying speed: please contact us Scope of delivery: without supports Optional accessories: - Supports - Side guides (single-sided and double-sided) - Frequency inverter for stepless speed adjustment - Length adjustment (longer/shorter) - Additional roller tracks/roller curves with chain drive Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, The Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Avtomatski izravnalni stroj za tračne žage. Za avtomatsko merjenje, preverjanje in popravljanje neravnin. Širine rezil od 50 do 300 mm. Zelo dobro ohranjen stroj. Malo uporabljen. Kot nov. Možnost demonstracije stroja. Tehnični podatki v PDF datoteki. Bedey A Igwopfx Acmjwn

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Neugart WPLE 80 Right-Angle Planetary Gearbox – i=15 – Industrial Gearbox Description For sale is a compact and high-performance right-angle planetary gearbox from Neugart GmbH. The WPLE series is part of the proven "Economy Line" and is specifically designed for space-saving applications with right-angle (90°) power transmission. This gearbox impresses with high efficiency, low noise emission, and low-maintenance operation. Ideally suited for: - Automation technology - Mechanical engineering/special-purpose machinery - CNC and handling systems - Conveyor technology and positioning applications Technical Data Manufacturer: Neugart Model: WPLE 80 Gear ratio: i = 15 Size: 80 Design: Right-angle planetary gearbox (90°) Lubrication: Lifetime lubrication Mounting: Any installation position possible Condition Used Visual condition as shown in the pictures Functional condition unknown (not tested) Bwodpfx Asy Tw E Docmjn ⚠️ Important Notice Sale is expressly without functional testing Sold without any warranty or guarantee Ideal for tinkerers, for spare parts recovery or overhaul Special Features Compact design with high power density Good price/performance ratio Maintenance-free thanks to lifetime lubrication Suitable for servo drives Scope of Delivery Gearbox as shown Without motor and accessories

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 1.609 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61008195, vpenjalna sila: 800 kN, premer vijaka: 40 mm, razmak između stupova: 420 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 183 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 750 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The fully hydraulic CX series impresses with exceptionally compact, efficient, and flexible two-platen machines. The highly compact two-platen concept with a cantilevered clamping unit provides generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with the BluePower servo drive further establishes a powerful foundation to meet the highest demands and to provide the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM - MC 6 with TFT color display and multitouch functionality CLAMPING UNIT - Clamping force: kN 800 - Max mold opening force: kN 55 - Tie bar clearance (h x v): mm 470 x 420 - Mounting plate size (h x v): mm 670 x 670 - Mold installation height min.-max.: mm - Maximum daylight opening: mm 750 - Max. mold opening stroke: mm 500 - Ejector drive: hydraulic - Ejector stroke: mm 150 - Ejector force forward/return: kN 23 / 10 - Ejector speed forward/return: mm/s 760 / 800 - Max. mold weight: kg 1000 INJECTION UNIT Bwedpfx Acey Rlmwomjn - Screw diameter / Type: mm 40 / Standard (other diameters available) - Effective L/D ratio: 20 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 100 - Injection flow: cm³/s 126 - Screw drive/speed: rpm 295 - Plasticizing rate (standard): g/s 12.3 - Nozzle contact force: kN 50 ELECTRICAL PARAMETERS - Connected load: kW 15.0 - Installed heating capacity: kW 10.9 - Power supply: V/Hz 400 / 50, 3 phase with neutral WEIGHT AND DIMENSIONS - Net weight with control cabinet: t 3.55 - Length x width x height: m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - 1 additional temperature control zone for nozzle heating - Air valve, single (BWAP) - Pneumatic control for hot runner closure, single - Hydraulic core pull, single (BWAP) - Euromap interface for handling: E18, E63 - Euromap interface (central computer): E67, E77 - Adaptive Process Control (APC) - Injection-compression mode - Graphics analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered upon request. We look forward to your inquiry.

Stanje: rabljeno, Pneumo-hydraulic cylinder TOX Pressotechnik Bwedpfxou D Tz Ue Acmjn Hydro-pneumatic press unit, power package Type: S 04.00.050.12 D Serial no.: 208696.460 Year of manufacture: approx. 2000 Press force: 4.0 tons at 10 bar Press force: 3.0 tons at 8 bar Press force: 2.6 tons at 7 bar Press force: 2.4 tons at 6 bar Press force: 2.0 tons at 5 bar Press force: 1.6 tons at 4 bar Press force: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Piston rod thread: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height (power package with piston rod): 610 mm - Height (power package, hydro-pneumatic cylinder only): 560 mm - Additional base plate 160 x 160 x 20 mm - Ram plate: Ø 68 mm Space requirements (L x W x H): 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 units available, price per unit

Stanje: rabljeno, Drive motor, DC servomotor LENZE Type GFQBT 80-24 Spindle motor, electric motor, main spindle motor Serial No. 184592 Year of construction: 1993 Rated power: 4.2 kW Operating voltage: 260 V DC Rated current: 20 Amps Maximum speed: 3000 rpm Field excitation voltage: 200 V DC Field current: 1.15 Amps - electric brake Shaft diameter: 24 mm (shaft with 8 mm keyway) Shaft length: approx. 47 mm (shaft projection from centering collar) Bwodpstpkx Nefx Acmsn Centering flange diameter: 110 mm Pitch circle diameter: 130 mm, 8 x M8 threaded holes - Encoder, tacho, GBR 190V Longlife tacho HÜBNER Type TDP 0.2 LT-4 Tacho voltage: 60V / 1000 rpm Output current: 67 mA (max. 200 mA) Max. speed: 9000 rpm External fan LENZE (EBM) Type G2E 120 Supply voltage: 230 V, 50 Hz, 0.32 A, 0.075 kW Overall length: 630 mm (without shaft and centering flange) Overall dimensions L x W x H: 690 x 340 x 430 mm Net weight: 45 kg Good condition

Stanje: rabljeno, Single-column Eccentric Press RICHTER Type PEKRS 80 Year of manufacture: 1970 – Refurbished in 2024 Press force: 80 tons Throat depth: 350 mm Table size: 900 x 650 mm Pass-through hole in clamping table: Ø 200 mm Ram surface: 700 x 500 mm Strokes per minute: 70 spm Stroke adjustment: 6 – 100 mm Ram adjustment: 85 mm Max. installation height: 400 mm Clamping shank bore: Ø 50 mm Table height above floor: 810 mm Motor power: 8 kW Bwedpfx Aoi Db Ibocmsn Power supply: 400 V, 50 Hz - Pneumatic clutch/brake combination ORTLINGHAUS - Press safety valve HERION XSz 32 - Pneumatic counterbalance cylinders - Overload protection with rupture disk in the ram - Central lubrication system with hand pump Space requirements (L x W x H): 1800 x 1250 x 2830 mm Weight: 5.7 t Very good condition Technically overhauled and retrofitted with new electrics to the latest UVV standards Control system retrofit in 05/2024 – suitable for manual loading operations – according to DGUV Information 209-030 (Press Inspection) as well as Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools – Presses – Part 1: General safety requirements EN ISO 16092-2: Machine tools – Safety of presses – Part 2: Mechanical presses - Operator panel with plain-text fault diagnostics and diagnostic screen for fast error localization - New electrical cabinet, side-mounted on the machine - Control system fully based on SIEMENS, featuring S7-1200 PROFIsafe PLC and 7” TFT touch display - Two-hand control panel with emergency stop and anti-tie-down circuit - Electric foot switch - Cam controller with monitoring function - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure scale - Complete machine rewiring - Updated operating manual The machine is equipped with 6 operating modes: 1 = Setup 2 = Single stroke, two-hand operation 3 = Single stroke, foot operation 4 = Continuous run, foot operation 5 = Automatic continuous run 6 = Reverse run

Stanje: rabljeno, Coil Processing Line – Decoiler and Straightening Machine Year of Manufacture: 1991 Strip Width: 50 to 450 mm Sheet Thickness with Straightener Disengaged: 6 mm Sheet Thickness with Straightener Engaged: 2 mm - Excellent equipment and feeding aids Required floor space (L x W): approx. 7,000 x 3,000 mm Total weight: approx. 11 tons Bodpfx Ajif Sg Secmewn Condition: Good Straightening Machine, HMS Type RS 47-04/1, Serial No. Strip Width, Nominal: 400 mm Strip Width, Max. Passage Width: max. 455 mm Strip Thickness at 400 mm width (steel): max. 1.5 mm Strip Thickness at 400 mm width (copper): max. 2 mm Speed: max. 40 m/min Number of Straightening Rolls: 7 pcs Straightening Roll Diameter: Ø 40 mm Number of Feed Rolls: 2 pcs Feed Roll Diameter: Ø 80 mm Infeed/Throughput Height: 1,500 mm - Straightening rolls hardened, ground, and hard-chromed, supported centrally - Feed rolls hardened, ground, and hard-chromed, with hydraulic lift - Manual straightening roll adjustment - Infeed aid with hydraulically extendable tongue and hydraulically adjustable guide roller - Adjustable side strip guides - All straightening rolls driven via distributor gearbox and cardan shafts - Both feed rolls driven via gearbox and cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or processing thicker material, stroke movement by trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3,600 x 2,200 x 2,200 mm Net weight: approx. 4 tons Decoiler, HMS Type BA 1.5-06/80, Serial No. Coil Weight: max. 8,000 kg Outside Coil Diameter: max. 1,600 mm (with loading saddle) Outside Coil Diameter: max. 2,000 mm (without loading saddle) Coil Flange Diameter: Ø 1,700 mm Inside Coil Diameter, Expansion Range: 460–520 mm Coil Width, Nominal: max. 630 mm Expansion Jaw Width: 750 mm Height of decoiler head above base plate: 1,500 mm - Decoiler head driven by hydraulic motor and gear - Pneumatic overrun brake on decoiler head TWINFLEX - Hydraulic expansion of decoiler head via central wedge slider system - Hydraulic hold-down arm with double pendulum roller, hydraulically driven - Coil loading saddle with 12 t lifting capacity and 300 mm stroke - Decoiler on overfloor travel frame with motorized cross travel Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Net weight: approx. 5 tons Central hydraulic unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1,600 x 850 x 1,450 mm Net weight: approx. 800 kg Electrical control cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2,800 x 500 x 2,250 mm Net weight: approx. 800 kg

Stanje: dober (rabljeno), Kratkohodni visokotlačni valj za velike obremenitve, visokotlačna hidravlika, kompaktni valj, lahkokovinski valj, visokotlačni valj, univerzalni valj, hidravlični valj, izravnalni valj, hidravlični bat, hidravlični tlačni valj, dvižni valj s tlačnim batom, hidravlični kratkohodni valj, hidravlični ploski valj -Proizvajalec: Lukas, enostranski lahkokovinski valj s povratno vzmetjo, hod 50 mm -Tip: HP 20/50 -Premer bata: 65 mm -Dvižna sila: 20 t -Količina: 2x valja na voljo -Cena: na kos Bwedpfxowtm H Ds Acmon -Dimenzije: 140/100/V205 mm -Teža: 6,1 kg/kos.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Spiralni mešalnik Pietroberto Easy 80 - rabljen - letnik 2011 - kapaciteta 80 kg testa (pribl. 120 litrov) - elektronsko upravljanje - 2 hitrosti - povratni vrč - stroj na premičnih kolesih - zaščitni pokrov vrča Bsdpfoy T R N Nox Acmjwn - spirala in kotliček iz nerjavečega jekla - tehnično stanje zelo dobro - prevzem iz skladišča/možnost dostave - cena na povpraševanje

Stanje: rabljeno, Leto izdelave: 1981, Delovna širina: 510 mm Skobeljni valj: segmentno rezilo Število nožev: 2 Dolžina poravnalne mize: 2600 mm Nastavitev poravnalne mize: hidravlično / nožni pedal Nastavitev konkavno-konveksnega spoja: da Prikaz odstranitve ostružkov: skala Prikaz konkavno-konveksnega spoja: skala Kot paralelnega prislona nastavljiv: da Moč motorja: 5,5 kW Zavoro motorja: da, avtomatska Dolžina stroja: 2600 mm Bsdjy Hqdgjpfx Acmjwn Širina stroja: 1000 mm Teža: 1050 kg

Stanje: rabljeno, Leto izdelave: 2002, X-axis travel: 880 mm Y-axis travel: 630 mm Z-axis travel: 630 mm Table clamping surface: 1250 x 700 mm NC rotary table integrated, 700 mm diameter Spindle taper: SK 40 Spindle taper per DIN 69871 Spindle speeds – infinitely variable: 20 – 12,000 rpm Bodpfx Ajtqqmbecmown Control: HEIDENHAIN Model: TNC 430 Feed rates x/y/z – infinitely variable: 20 – 15,000 mm/min Rapid traverse: 30 m/min Tool changer: 32 (2 x 16) positions Tool diameter: 80 / 130 mm Max. tool length: 315 mm Max. tool weight: 8 kg NC rotary table – max. speed: 15 rpm Table load capacity: 600 / 500 kg Swivelling milling head: + / - 12 / 90° Total power requirement: 60 kW Machine weight: approx. 9.6 t Machine dimensions (L x W x H): 4.53 x 2.60 x 2.50 m = 5-axis machining center, table clamping surface 1250 x 700 mm with integrated NC rotary table (= 4th axis), programmable milling head (= 5th axis) Accessories: electronic handwheel, chip conveyor (screw conveyor), coolant system

Stanje: rabljeno, Leto izdelave: 2012, x-travel 800 mm y-travel 800 mm z-travel 600 mm Control: Heidenhain iTNC 530 Spindle speed: 30 - 8,000 rpm Spindle motor: 25 kW Torque: 244 Nm Tool holder: SK 40 Number of tool positions: 30+190 A-axis: ° C-axis: 360° Clamping surface of table: 800 x 630 mm Table load: 600 kg Rapid traverse (x / y / z): 40 m/min Power-on hours: approx. 79,968 h Spindle hours: approx. 800 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. The spindle has been overhauled. Technical features & accessories: - Additional magazine - Chip conveyor - Continuously variable speed - 5-axis simultaneous machining - Internal coolant supply 70 bar - Rinsing gun - Workpiece measuring probe - Blum laser tool control - Heidenhain 410 electronic handwheel Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Bwsdpfx Acsyzt Dljmjn Technical data and information are subject to change and error. Prior sale reserved!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Baterija HAWKER 80 Volt tip 8 PZM 1240 Mere: 1495 x 995 x 780 mm Bwedpfx Aeyvulmocmjn Leto izdelave: 2021 Druge velikosti (24V, 48V, 80V) na zahtevo!

Stanje: novo, Tlak: 80 Moč motorja: 3 Vgradna višina: 900 Hod: 300 Dimenzije (D x Š x V): 1.650 x 850 x 2.400 Približna teža: 850 Cilinder: 180 Hitrost: 7,54 Hitrost: 10,90 Standardna oprema: Kakovostna hidravlična preša, ki se lahko upravlja ročno ali motorizirano. Cilindri so lahko premaknjeni bočno. CE-certificirano Regulacija tlaka 1 leto garancije Manometer Uporabniški priročnik (tiskan) Bjdpfxsicidnj Acmewn Širina stojala: 900 x 300 mm Slika je simbolična.

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 466 h, 2022 | Bomag BMP 8500 rovokopačka za rovokopačku | Druga valjka | 466 ur 📍Lokacija: Nemčija 🚛 Dostava na vašo destinacijo je na voljo – uporabite naš kalkulator za izračun stroškov prevoza! 💰 Takojšnji nakup za 15.900 EUR ali ponudite svojo ceno. Plačilo ob dostavi je na voljo za ugodno provizijo (odvisno od odobritve)* 👷‍♂️ Pregledal neodvisni strokovnjak 27 kontrolnih točk, vse odobrene ✅ 0 pomanjkljivosti ℹ️ 0 napak ⚠️ 📌 Opomba inšpektorja: Ni ugotovljenih napak 📄 Želite si ogledati popolno poročilo o pregledu, dodatne fotografije ali video? Namig: referenca "40835 Equippo" se pogosto uporablja za iskanje več podrobnosti na spletu. 💡 Zakaj izbrati to napravo in našo storitev: ✔ Temeljit strokovni pregled ✔ Dostava neposredno na lokacijo ✔ Garancija vračila denarja ✔ Varne in prilagodljive možnosti plačila 🔄 Zanima vas še druga oprema? Ponujamo uporabna orodja in vire za vse lastnike in upravljavce opreme – enostavno dostopno na naši platformi. Bjdpfjy Sa Hnex Acmewn

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), stiskalna sila: 80 t, hod: 350 mm, širina mize: 1.400 mm, dolžina mize: 840 mm, kapaciteta rezervoarja za olje: 230 l, skupna širina: 1.600 mm, skupna višina: 3.600 mm, skupna masa: 8.000 kg, Oprema: CE označba, varnostna svetlobna zapora, NEW EXNER hydraulic try-out press Type PG 80 Number of press cylinders: 2 units Nominal force (adjustable): 2 x 400 kN Return force: 2 x 150 kN Ram stroke: 350 mm Ram width: 1400 mm Ram depth: 840 mm Guide length: 750 mm Ram speed under load up to 100%: approx. 0-10 mm/s Ram return speed: approx. 0-20 mm/s T-slots in table/ram according to DIN 650: 22 mm Installation height - stroke at top: 600 mm Table width: 1400 mm Table depth: 840 mm Clearance between columns (front): 1000 mm Clearance between columns (side): 600 mm Table height above floor: 1100 mm Bwedpfx Acjza Em Usmsn Nitrodyne control / Return force for spring tools: max. compensable spring force 150 kN Accuracy Maximum deviation of parallelism between ram surface and table surface (from right to left): - Free movement (absolute): < 0.05 mm - Off-center load at maximum force (absolute): < 0.10 mm Table/ram deflection at nominal force and 2/3 surface loading: 0.10 mm Approach accuracy at BDC without mechanical depth stop: ± 0.05 mm Optionally, a servo roller feeder can be offered and installed.

Leto izdelave: 1981, stanje: delavnici obnovljeno (rabljeno), - Proizvajalec - MORONI Bwjdpfx Aohbr T Tscmsn - Model - SPND 80 - Razpon premera žice - 1,8 - 3,5 mm - Dolžina žebljev - 10 - 80 mm - Moč - 4 kW - Hitrost - 440 žebljev/min. Stroj je obnovljen.

Stanje: rabljeno, prevoženi kilometri: 95.000 km, moč: 152 kW (206,66 KM), prva registracija: 10/2019, vrsta goriva: dizel, skupna masa: 7.490 kg, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, dolžina tovornega prostora: 4.200 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.970 mm, Oprema: ABS, dvižna zadnja plošča, klimatska naprava, We are very pleased that our offer has attracted your interest and can already assure you that in our company you will be able to purchase a quality, affordable vehicle with a fully traceable service history! Certified KIKO sliding curtain body with rear load securing EURO 6 D Tail lift 1,500 kg Trailer coupling (drawing jaw) Bedpfozahi Ssx Acmswn Trailer coupling (ball) Rear axle air suspension Air conditioning 3 seats Reversing camera GERMAN VEHICLE REGISTRATION / EXPORT SERVICE We will organize your registration and export documents / EUR 1 and manufacturer’s declaration for export. FINANCING On request, we are happy to offer you a leasing, hire purchase or financing package. SERVICE General inspection (TÜV) / Safety inspection for tail lift (UVV LBW) / Load securing check (LGS) / Tachograph inspection / Installation of OBU device and service by our authorized workshop. TOLL / ROAD CHARGES Toll booking available on site. TRAVEL / DISTANCES Wittlich station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale subject to our general terms and conditions. The information provided online is non-binding and for description purposes only. They do not constitute guaranteed specifications. The seller is not liable for data entry or transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Stanje: rabljeno, Leto izdelave: 2026, sestavljen iz: osnovnega ohišja stroja, 2 vrtljivi vreteni, krmiljenje SIEMENS Sinumerik S7-1500 (glej slike), 1 hladilna naprava za stikalno omaro RITTAL SK3185830, 1 osnovna plošča stroja (shranjena na prostem) Bjdpfx Acsy T N Abjmewn

Leto izdelave: 2022, stanje: rabljeno, številka stroja/vozila: S100/80.1, Teža stroja pribl. 2.300 kg, sestavljena iz: osnovnega telesa stroja, industrijskega robotskega roka KUKA Cybertech-2 KR 16 R1610-2, letnik 2022, serijska št.: 1305737, krmiljenje KUKA KR C4, serijska št.: 3085496, upravljalna plošča, 3D skener PHOTONEO PhoXi L, serijska št.: 2018-02-010-LC3, upravljalna plošča na dotik SIEMENS Simatic. Bodpfxoy T Nz Rs Acmswn