Obdelovalni center - univerzalni

HEDELIUS RS 80 S

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm Control Fanuc MSX-701III Maximum turning diameter: 660 mm Maximum turning length: 1498 mm Swing diameter over cross slide: max. 400 mm Spindle speed: 3000 rpm Tool magazine with 40 stations Turret with 10 positions Total connected load: 90 kVA Machine weight approx. 26.6 t Space required approx. 5301 x 2997 x 2788 mm Capacity: Swing diameter over cross slide (Tool spindle 1): 750 mm Swing diameter over cross slide (Turret 2): 400 mm Max. turning diameter (Tool spindle 1): 660 mm Max. turning diameter (Turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Axes travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120°, full B-axis 1° indexed and 0.0001° clamped Ledpfey Spuuex Af Seag X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (sub spindle): 1610 mm Rapid traverses: (X1, Z1) 50 m/min., (Y, X2, Z2, SZ) 30 m/min. Main and sub spindle: Infinitely variable spindle speeds (Spindle 1 + 2): 30-3000 rpm C-axis (Spindle 1 + 2): 0.001° Main spindle motor: 22/18.5 kW Sub spindle motor: 22/18.5 kW Torque (Spindle 1 + 2): 1000 Nm Disc turret: Number of tool stations: 10 Speed of driven tools: 6000 rpm Drive power: 5.5/3.7 kW Milling spindle: Tool holder: HSK A63 Max. speed: 12000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40 positions Tool diameter: 70/140 mm Tool length: 400 mm Tool weight: 8/10 kg Total connected load: 90 kVA Overall dimensions (L x W x H): 5301 x 2997 x 2788 mm Machine weight: 26.6 t Equipment/Accessories: - Upper milling spindle (B-axis), full 4th axis, positioning 0.0001° - 40-position tool magazine - Lower 10-position turret, all positions driven - 2 x 3-jaw quick change chuck KNCS-N 315/91 - KNOLL high-pressure coolant system, pressure selectable 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter unit - Chip conveyor - Blow-off system for main spindle chuck (M-function control) - Blow-off system for tool cutting edge (M-function control) - Coolant gun incl. accessories - Oil mist extraction - Direct measuring system for X1, X2, Y axis - Bar feeder interface - Dual foot switch for both spindles - Islands and pockets programming for MAPPS - High speed fixed cycle for MAPPS - Program memory extension to 8 MB - Program restart - 3-stage signal lamp - Memory card 512MB (CF Card) - Measuring arm (image) for tool measurement in machine - Tool holder + case, reduction sleeves, driven tools - Jaw set - Collet set

Stanje: zelo dobro (rabljeno), Drilling depth: 500 mm Spindle speed: 1 O F F E R We can offer you, subject to prior sale and errors excepted, the following from our stock, without obligation: DEGEN Universal Deep Hole Drilling Machine Model: UTB 500-2 Year of manufacture: - _____ Drilling depth: 650 mm Drilling diameter with twist drill: 16 mm Drilling diameter with single-lip drill: 25 mm Spindle taper: SK40 Infinitely variable feed: 0–120 mm Rapid traverse: rpm Laedpfxjxx A D To Af Sog Drilling unit vertically adjustable: 250 mm Table dimensions: 570 x 1000 mm 4 T-slots, 14 mm T-slot spacing: 90 mm Table load capacity: 1000 kg Transverse table travel: 460 mm Table swivels: 360° Weight approx.: 1,600 kg Accessories / Special Equipment: • Compact design on a robust base • Deep hole drilling up to 500 mm length possible—ideal for extended drilling in metal • The machine is equipped with a coolant system • Optionally with cross-slide feed unit • Features an RSF Elektronik digital display, type Z 502, for X and Y axes, with 0.01 mm resolution • A solid solution for workshops requiring deep, straight bore holes—not intended for very large diameters or complex machining tasks • The Degen UTB 500 has been extensively modernised—with Lenze feed drive, overhauled Y-axis, new glass scale encoder, newly mounted spindle, and new gas pressure spring—offering reliable precision and high performance Condition: good to very good – ready for demonstration under power A video of the machine is available here (please click on the link): UTB 500/4 Delivery: ex stock—as inspected Payment: strictly net—on receipt of invoice We look forward to your order. We also have further tool grinding machines in stock—please enquire!

Stanje: dober (rabljeno), Leto izdelave: 2017, Pomiki X Y Z: 1067 mm x 610 mm x 610 mm, Velikost mize: 1270 mm x 610 mm, 600 mm C-osna miza (360 stopinj) Glava +/- 90 stopinj (B-os), 37 kW motor vretena, Avtomatski izmenjevalec orodij s 40 mesti (stranska roka), Stožec vretena DIN 40, Vreteno 12.000 vrt/min, Laedpjzh Nczefx Af Sog Krmilnik Hurco Winmax 5, Hladilna tekočina skozi vreteno, transporter odrezkov, sonda za vreteno.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 68.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.200 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 1.200 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 15.000 obr/min, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 167 Nm, skupna masa: 35.000 kg, Premiere mise en service : décembre 2014 Lajdpoyrc Akjfx Af Sjg Commande : Fidia Axe X : env. 2 200 mm Axe Y : env. 3 500 mm Axe Z : env. 1 200 mm Axe A : ± 100° Axe C : ± 275° Machine sous tension : env. 68 000 h Heures total broche : env. 26 500 h Table de bridage : 2 000 x 3 500 mm avec rainures en T Tête à fourche 2 axes Puissance broche : 70 kW Vitesse de broche : max. 15 000 tr/min Couple : max. 167 Nm Porte-outils : HSK 100A Déblocage outil : hydraulique Entraînements axes linéaires Vitesse avance X, Y et Z : jusqu’à 50 m/min / 30 m/min Données de raccordement Tension : 400 V Fréquence : 50 Hz Dimensions, poids Encombrement machine hors périphériques : env. 8 000 x 6 000 x 5 000 mm Poids total : env. 35 000 kg Équipements supplémentaires - Installation de refroidissement - Changeur d’outils 26 positions - Carénage espace de travail - Convoyeur à copeaux En option, en supplément : - Palpeur de mesure radio - Laser BLUM État de la machine Entièrement fonctionnelle, en très bon état. Visible sous tension.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, CNC serija Fanuc Laedpfx Aoyiu Dnef Sog Maksimalni rotacijski premer na strojni mizi: 780 mm Maksimalni rotacijski premer na suportu: 630 mm Maksimalni premer obdelave: 406 mm Maksimalna dolžina obdelave: 520 mm Premer obdelovanca: 65 mm Nos vretena: ASA A2-6 Premer vretena: 52 mm Hitrost vrtenja vretena: 5000 vrt/min Moč motorja vretena: 18,5 kW Premer proti-vretena: 45 mm Nos proti-vretena: ASA A2-5 Nosilci za vpenjalne glave Bellegrandi na vretenu in proti-vretenu + 2 samocentrirne Gib osi X: 260 mm Gib osi Z: 590 mm Gib osi Y: +102 -51 mm Gib osi B: 590 mm Hitro gibanje osi X/Z/B: 30 m/min Hitro gibanje osi Y: 10 m/min Tip rezerve: BMT Število pozicij na rezervi: 12 Hitrost vrtenja motoriziranih orodij: 5000 vrt/min Dimenzije: 3530x1863 H=2163 mm Teža: 5900 kg Št. 10 nosilcev za motorizirana orodja

Stanje: rabljeno, Leto izdelave: 2011, x-way 835 mm y-way 510 mm z-way 510 mm Distance spindle nose to table 120 - 630 mm Control iTNC 530 ERGOLine Heidenhain Speed range - main spindle 20 - 10,000 rpm Ledjx R Em Djpfx Af Seag Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 130 / 87 Nm Clamping surface of table 1,000 x 560 mm Max. table load 800 kg Number of T-slots 5 T-slots - width 14 mm T-slots - distance 100 mm Number of tool stations 20 pos. Max. tool diameter 80 mm Max. tool diam. with empty adjacent box 130 mm Max. tool length 250 mm Max. tool weight 6.0 kg Rapid traverse ( X / Y / Z ) 30 m/min Feed rate 1 - 20,000 mm/min Total power requirement 23 kVA Machine weight approx. 4.0 t Required space approx. 4.5 x 3.5 x 2.7 m CNC vertical machining centre DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Deli, prikazani ročno, niso priloženi. Ob stroju so priloženi nosilci orodij SK 40. X 600 mm; Y 430 mm; Z 460 mm; A 150° x 0,001; C 360° x 0,001. 12.000 vrt/min, Heidenhain iTNC 530, 40 mest za orodje v menjalcu SK 40. Lasdpfx Aolpcdwef Sog

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Laedpfx Afsh Nypfe Ssg

Leto izdelave: 2022, obratovalne ure: 108 h, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: SN2120, EDM312MF30-SLM (second-life machine) Technical Data: Travel distances: 450x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance table/electrode holder: 150/450mm Max. workpiece weight: 800kg Max. dielectric fluid: 700l Dimensions (W x D x H): 2700x1800x2350mm Machine weight: 2500kg Power supply: 3/N/PE 400/230V 50Hz Connected load: 6.7 KVA Lsdpfx Aohtrdyof Seag Equipment: Color: newly painted in light grey + tele grey New control cabinet New APC910/2 controller (Win10) MF30 V2.8 operating interface New B&R drives with Endat interface Touch screen display Exopuls+ 60A generator Rev.4 5-position tool changer (WZW) Contact protection operable via push button Linear scales on all axes X, Y, Z (Fagor) 2 cartridge filters Termogamma cooling unit Completely new machine wiring New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve terminal CO² extinguishing system C-axis Hirschmann 50 rpm, holding brake overhauled Handheld control panel with enabling switch Automatic lowering tank Clamping chucks: Erowa IST, Hirschmann, 3R 12 months warranty Transport On-site commissioning Training

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06007153/001, skupna višina: 6.050 mm, skupna širina: 3.380 mm, skupna dolžina: 3.074 mm, nosilnost na odsek shranjevanja: 210 kg, gradbena višina: 6.050 mm, vhodna napetost: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of manufacture: 2006 Ljdpfxjxq Tbts Af Soag Total Load: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available on request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (The height of the Kardex can be adjusted to the available height) Power supply: 3/N/PE 400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed. More or heavier trays available on request. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - One access opening with sliding doors for safety of personnel and stored goods - Control C2000, with B/W OP2000 display - LED anti-glare lighting above the access point - Use of toothed belt for minimal noise - Use of toothed belt for the fastest order picking - Distances can be set in 25 mm increments by arranging the support profile, a prerequisite for high-density storage - Weight management controls the tray load - Including light pointer Price: On request via email only Price: excl. VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands