Obdelovalni center - univerzalni

Deckel Maho DMU 80 T

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, CNC rezkalni stroj Deckel Maho DMU 80 T Krmilnik Heidenhain TNC426 Število obratov: 20-6300 rpm Pomik x, y, z: 20-10000 mm/min Hitri pomik x, y, z: 15000 mm/min Delovno območje x 800mm, y 650mm, z 550mm Nosilec orodja: SK40 DIN 2079 Vpenjalni vijak DIN 69 872 Menjalnik orodij: 25 pozicij Največji premer orodja 160mm Največja izstopna dolžina od konice vretena 315mm Isdpfxsx Tapfo Af Tsal Delovna miza: Dimenzije 1100x600mm T-utorji 9 x M14 Dovoljena teža 500kg Transportni podatki: Teža 5800kg Dimenzije (dolžina x širina x višina) 3,05 x 2,40 x 2,45m

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Iedpfx Afexp Hmao Tsal Known defects: - Error message during startup - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, 5-Axis CNC Machining Center Year: 2006 Control: Heidenhain iTNC 530 Technical specifications: X-axis travel: 880 mm y-axis travel: 630 mm z-axis travel: 630 mm Max. torque: 130 Nm Tool holder: SK 40 (ISO 7388IIB) Tiltable axis B: 103° Working table: Clamping surface: 1,250 x 700 mm Rotary table diameter: 700 mm Rotatable axis C: 360° Max. table load: approx. 500 kg T-slots: 11x 14 mm x 63 mm Tool magazine: Number of tool stations: 32 (2x 16) positions Tool holder: SK 40 (ISO 7388IIB) Iaodewn A Slepfx Af Tsl Max. tool diameter: 80 / 130 mm Max. tool diameter with adjacent stations free: 160 mm Max. tool length: 315 mm Max. tool weight: 8.0 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 40.000 h, Krmilna enota Znamka: HEIDENHAIN Model: Mill Plus Glavni pogon Hitrostno območje vretena: 18.000 Število osi: 3 Pomiki Pomik X-osi: 880 mm Pomik Y-osi: 630 mm Pomik Z-osi: 630 mm Orodja Tip držala orodja: SK40 Ta 3-osni stroj DMG DECKEL MAHO DMU 80T je bil izdelan leta 2004. Opremljen je z visokohitrostnim vretenom pri 18.000 vrt/min, notranjim dovodom hladilne tekočine s tlakom 40 barov ter menjalnikom orodij s 32 postajami. Stroj vsebuje držala orodij SK 40 in opazovalno okno Rotoclear. Idealen za zahtevne obdelovalne naloge – izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra DMG DECKEL MAHO DMU 80T. Kontaktirajte nas za več informacij o tem stroju. Iodpfxjx D Iuno Af Teal Vrsta uporabe Rezkanje

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 124, Cena na upit Polovna CNC vertikalna strug mašina Proizvođač: MORI SEIKI Model: VL 55 Iedpfswl An Iex Af Toal Godina proizvodnje: 2001 Sa CNC upravljanjem MSC 518, revolverskom glavom za 12 alata i transportnim sistemom za strugotinu Maks. dužina obrade = 653 mm Maks. prečnik obrade = 550 mm X osa = 350 mm Z osa = 660 mm Broj obrtaja do = 2000 o/min Snaga vretena = 30 kW Težina cca = 12,5 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Na voljo je univerzalni obdelovalni center z upravljanjem: Heidenhain TNC 426. Obratovalne ure: cca 45.380h, ure vretena: cca 14.384h. Ogled možen po predhodnem dogovoru. Ijdpox Ivi Djfx Af Tjal

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Tip: DMU 80T2 Letnik: 10/2005 Krmiljenje: Heidenhain 3D iTNC-530 Iasdpfx Aexz Rhlef Tjl Vpenjalna površina: 1250 x 700 mm (fiksna miza) Delovno območje: X: 980 mm Y: 630 mm Z: 630 mm Obmoćje vrtenja: 20 – 12.000 1/min Pomik: 0–10 m/min Izmenjevalec orodij: 32 mest SK 40 Strojni časi: Krmilje vklopljeno: 33.814 ur Stroj vklopljen: 29.764 ur Programski čas: 8.237 ur

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Machining Centre - Vertical / Manufacturer: DECKEL MAHO / Model: DMC 63V / Year of Manufacture: 1999 The machine can be inspected under power and cutting, by appointment. Well-maintained, very good condition, fully functional. Spindle replacement: 18.03.2022 Spindle hours (as of 13.03.2025): 51,206 h The machine is equipped with a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed drives: - Feed force X, Y, Z (100% duty cycle): 6,000 N - Feed rate: 0 - 30,000 mm/min - Rapid traverse X, Y, Z: 30 m/min - Ball screw diameter/pitch (X, Y, Z): 40/20 mm Iedsv Nxbyspfx Af Tsal Positioning accuracy: - Pmax in X, Y, Z axis according to VDI/DGQ 3441: 0.015/0.010 mm (indirect/direct measuring system) Measuring system: - Input increment: 0.001 mm Work spindle: - Drive power (40/100% duty cycle): 13/9 kW - Torque (40/100% duty cycle): 83/57 Nm - Speed range: 1 - 10,000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12,000 N Tool magazine / changer: - Tool change system: Pick-up - Number of magazine positions: 24 positions - Max. tool diameter with free adjacent positions: 80/140 mm - Max. tool length: 300 mm - Max. tool weight: 7 kg - Chip-to-chip time: 6.5 sec - Magazine rotation speed: 47 rpm - Max. load capacity of tool magazine (24 x 3 kg): 72 kg Machine table: - Clamping area with T-slots DIN 650-14: 800 x 500 mm - Table load (setup weight): 500 kg - Loading height: 850 mm - Max. workpiece height (with max. tool length): 240 mm EQUIPMENT: - CNC control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - ICS, 15 bar - Coolant system (emulsion) - Electronic handwheel - Chip conveyor - Documentation - CE marking No guarantee for completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, obratovalne ure: 1.600 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 650 mm, pomik po osi Z: 550 mm, največja hitrost vrtenja: 6.300 obr/min, skupna masa: 5.500 kg, največja hitrost vretena: 6.300 obr/min, Univerzalni obdelovalni center Deckel Maho DMU 80T Leto: 2000 Krmilje: Heidenhain Delovnih ur: ~1.600h Tehnični podatki: Hitrost vretena: 0 - 6.300 min-1 Navor vretena: Vpenjalni stožec: SK 40 Število orodnih mest: 24 X-os: 800 mm Y-os: 650 mm Z-os: 550 mm Dodatna oprema: - Naprava za hladilno sredstvo KSS Iasdewq Dmcspfx Af Tjl - 30 držal SK 40 - 1x strojni primež Stroj je v zelo dobrem stanju. Malo rabljen.

Stanje: dober (rabljeno), Leto izdelave: 1997, Oprema: dokumentacija / priročnik, Deckel DMU 80T Mill Plus Isdpju Hy E Sefx Af Toal

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61373, It is in working condition. Iaedevwlf Iepfx Af Tjl

Stanje: rabljeno, Leto izdelave: 2002, x-axis travel: 880 mm y-axis travel: 630 mm z-axis travel: 630 mm Control: iTNC 530 Heidenhain Main spindle: Speed range - main spindle: 20 - 10,000 rpm Drive power - main spindle: 13 kW Torque: 130 Nm Tool holder: BT 40 DIN 69872 Worktable: Table clamping surface: 1,250 x 700 mm Max. table load: approx. 500 kg Table diameter: 700 mm T-slots: 11 x 14 x 63 mm Max. table rotation speed: 15 rpm Iedevn Ur Sspfx Af Tsal Tool magazine: Number of tool stations: 32 (2 x 16) positions Tool holder: BT 40 Max. tool diameter: 80 / 130 mm Max. tool diameter with adjacent stations empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8.0 kg Feed rates: Feed speed: 20 - 15,000 mm/min Rapid traverse: 12 m/min Total power requirement: 30 kVA Machine weight: approx. 9.0 t Space requirements: approx. 4.0 x 3.0 x 2.5 m CNC Universal Machining Centre DECKEL MAHO - DMU 80 T - 5-axis - Rotary table on fixed table - Retrofit to SK 40 optionally possible!

Stanje: potreben popravila (rabljeno), Leto izdelave: 1995, obratovalne ure: 18.000 h, Funkcionalnost: omejena funkcionalnost, potovalna razdalja osi X: 880 mm, pomik osi Y: 630 mm, pomik po osi Z: 630 mm, Oprema: transportni trak za ostružke, For sale: DECKEL MAHO DMU 80 T – a robust and precise 3-axis machining center with a large clamping table. The machine is still connected to power and fully functional – a test run can be arranged upon request. However, axis overhauls are required. On-site loading can be organized. Iajdoxphdgjpfx Af Tsl Technical data: Travel (X/Y/Z): 880 / 630 / 630 mm Table clamping surface: 1250 x 700 mm Table load capacity: 600 / 500 kg Spindle taper: SK 40 (DIN 69871) Spindle speed range: Infinitely variable, 20 – 12,000 rpm Control: HEIDENHAIN TNC 426/430 Feed rate X/Y/Z: Infinitely variable, 20 – 15,000 mm/min Rapid traverse: 30 m/min Tool changer: 25 positions Tool data: Ø 80 / 130 mm | Max. length 315 mm | Max. weight 8 kg Total power requirement: 60 kW Machine weight: approx. 9.6 t Dimensions (L x W x H): 4.53 x 2.60 x 2.50 m Accessories: - Electronic handwheel - Chip conveyor (screw conveyor) - Coolant system ✅ Your benefits at a glance: - Ready for immediate use – machine is connected and can be tested - Solid 3-axis machining center - High spindle speeds & feed rates for efficient machining - On-site loading available - Attractive price-performance ratio Location: 69181 Leimen Fixed price: €10,000 If interested or to arrange a viewing/test run, please get in touch!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Ijdpfx Aevgxfyef Tjal Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel The machine is supplied with many tools.

Leto izdelave: 1996, Stanje: dober (rabljeno), A used machining center from DECKEL MAHO equipped with: - MillPlus CNC control - Fixed angle table - Coolant system - Lighting - 25-position tool changer - Documentation Ijdjhzt Thspfx Af Tjal Travel paths X/ Y/ Z: 800/ 650/ 550mm Spindle speed: 20–6300 rpm Tool holder: SK 40 For further technical data, please refer to the PDF document. Technical specifications and dimensions are subject to change/errors excepted.