Pfeifer Technology & Innovation Plauen D Sistem Za Rezanje Plamena nakup rabljenega (120.911)

Stanje: zelo dobro (rabljeno), SISTEM ZA DOVAJANJE IN DOZIRANJE MATERIALA – COLORTRONIC S 3 KOMPONENTAMI, POPOLNOMA Z NADZORNO ENOTO Kodoyh Htcopfx Al Njlr

Leto izdelave: 2017, stanje: zelo dobro (rabljeno), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION (“BOOK ON DEMAND”) AND SHORT RUNS TECNAU LIBRA 800 Intended use: Suitable for imposition and processing of short print runs and single books (“books of one”) with varying sizes, page counts, and covers. Productivity: from print run of 1; up to 800 copies per hour Book format: min.: 100 x 125 mm / max.: A4 Thickness: min.: 2 mm / max.: 60 mm Ksdpfx Aoylyhdsl Nslr Equipment / additional information: Line configuration: 1. Roll feed: unwinder, merger, Dupla cutting machine, and book assembly station for the production of book blocks with 2-up printing 2. Sheet feeder: A variable number of loose sheets can be inserted into the book block as inserts. The sheets must be the same size and print run as the book block to be processed. 3. Feed to binding machine: Station for manual feed of pre-assembled book blocks, transfer with document scanning station, book turning module, and loading robot at the binding machine 4. Variable binding machine for production of softcover books. The binding machine is equipped with PUR glue on the spine and hot-melt adhesive on the sides of the book. 5. Softcover cover machine, configured with sheet cover feeder: already printed cover sheets are fed in, trimmed at the front, side-trimmed, and creased to the correct size to match the thickness of the associated book block. 6. Cooling tower/cooling spiral (product-specific) not included in scope of delivery; can be ordered depending on customer requirements (product type). The cooling conveyor can be configured according to space requirements and installation conditions. Price of conveyor depends on configuration. We will be happy to advise you on selecting the suitable conveyor. 7. Variable three-knife trimmer for trimming books with three-dimensionally variable formats and different cover types. 8. Line control software Finishing line The entire process is managed via 2D data matrix codes. Through the code, the system receives release for the following automatic setups and workflow controls: • Information on book dimensions and inserts (quantity and sequence) • Setup of the binding machine (spine position, thickness, and length) • Cover preparation: softcover → creasing, cutting, edge trimming • Correct cover-to-book matching • Three-knife trimmer (knife positioning is automatically set according to book size) Very good condition // Disassembly, machine packaging, and securing (insurance for transport of the machine) will be carried out by the manufacturer / Tecnau.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Professional CO2 laser with a 1600 mm x 1000 mm worktable and a tube rated at 150 W, peaking at 168 W! Standard equipment includes a CW5200 water chiller, a compressor for lens/material air assist, and a fume extraction unit. Work Area: The large 1600 x 1000 mm table enables processing of large and complex projects. Laser Power: Rated at 150 W, with peak output up to 168 W! This ensures fast and precise operation. Cooling and Performance: Equipped with a CW5200 water chiller to maintain optimal working conditions, and a compressor for lens and material air assist. Modern Technologies: Features Ruida RDC6445S controller, supports multiple graphic formats, WiFi and USB connectivity, and color separation. High Precision and Repeatability: Utilizes precision stepper motors and LEADSHINE linear guides, with resolution up to 2500 DPI. Versatile: Delivers excellent results when engraving and cutting materials such as acrylic, wood, textiles, leather, plastics, and more! Unique Standard Equipment: PURI 150-168W laser tube, fume extraction, robust steel honeycomb bed, and air compressor. Kodetvmnqopfx Al Njlr Advanced features, superior build quality, and a broad range of capabilities make our CO2 Laser 1610G not just a tool, but an investment in your business’s future! Model: 1610G Work Area: 1600x1000mm (Y-axis pass-through table) Rated Laser Power: 150 W Peak Laser Power: 168 W (!) Tube/Laser Type: Glass CO2 laser tube Cooling Type: Closed-loop water cooling – CW5200 chiller Max. Engraving Speed: 800 mm/s Recommended Max Cutting Speed: 400 mm/s Max. Cutting Thickness: Up to 25 mm (depending on material and parameters) Min. Character Engraving Size: 1 mm x 1 mm Engraving Accuracy: 2500 DPI Repeatability: ±0.01 mm NEW – Controller and Mainboard: Ruida RDC6445S – advanced module providing comprehensive parameter control and enhanced processing management Supported Graphics Formats: DST, PLT, BMP, DXF, DWG, AI, LAS, etc. Supported Interfaces: WiFi, USB Color Separation: Yes Drive System: Hybrid closed-loop stepper motors with high holding torque from LEADSHINE 15 mm linear guides from PMI Standard Equipment: - PURI laser tube 150-168 W - Fume extraction and ducting - CW5200 water chiller - Knife bed - Rigid steel honeycomb worktable - Air assist compressor

Stanje: novo, Leto izdelave: 2026, Technical data: • Extraction capacity approx. 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters: 28 • Dimensions: 752 x 1,982 x 2,144 mm • Weight: 300 kg • Filter category: G • Filter material: polyester Klsdpfx Alsd H Rf To Ner • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns • 2 containers • Mobile undercarriage • Filter cleaning with a vibration system and control unit + €850 for models equipped with a fire extinguisher (Safe System)

Stanje: rabljeno, Leto izdelave: 2022, Plus freight €4,000.00 and installation and commissioning €5,000.00. Sanding System B Sand 5 with Partial Rotator Operating Method: The panel is placed on the infeed table. It enters the partial rotator and is centered. It is sanded in the sanding unit, processed both in forward and return pass. The panel is rotated in the partial rotator. The second side of the panel is then sanded in the sanding machine. There are then two options: either the panel moves to the outfeed table and is unloaded, or it returns to the infeed table and is unloaded there (the second option increases processing time). Sanding Unit Configuration: - 1 upper sanding lamella roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm. - Cross brushes suitable for sanding cross-grain fibers. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW each (2 units). - 3 upper sanding discs to perfectly cut longitudinal and cross-oriented wood fibers. Power: 1.5 kW each; Diameter: 400 mm. - Disc brush for chamfering edges. The unit operates as a deep brush. Upon detection of the panel edges, it tracks the door edges. Power: 0.75 kW; Diameter: 250 mm. Machine Features: - The unique sanding system of this unit ensures perfect wood sanding and/or intermediate sanding of panels. - All tools are controlled by frequency inverters. - All brushes equipped with quick-release sanding strips; replacement does not require changing the hub. - The discs feature air jets for optimized cleaning and operating time. - Sanding wheels equipped with hook-and-loop fastening system. - Feed and rotation are controlled via PLC to prevent edge breaking of workpieces. - High-quality sanding on 4 sides thanks to the unit’s consistent material removal. - Automatic and rapid switching of processing units. - Constant pass-through height; PLC and industrial software enable integration into a finishing line. - Infinitely variable speed control of discs, brushes, and feed via state-of-the-art frequency inverters. - Reversible rotation (right/left) of discs and brushes with different abrasive grades. - Individually driven feed adjustments for discs, rollers, and belts. - Additional adjustment options of brushes and discs to compensate for abrasive wear and to allow variation of sanding pressure on surfaces. - Robust machine base made of steel tubing ensures maximum rigidity, stability, and flatness. - Milled upper machine bed for optimal parallelism of the working surface for the sanding discs. - All unit carriages are mounted on linear ball bearing guides, providing high load capacity and precision. - Motor-driven feed belt, frequency inverter controlled, 0.55 kW. - Machine doors equipped with safety devices. Kedpfevvkipox Al Nslr - Machine doors feature viewing windows for monitoring workpieces during operation. - Pressure rollers below the units, diameter 80 mm, rubber-coated, for secure workpiece hold during processing. - Low ongoing costs thanks to individual replacement of lamellae. - Low operating noise due to enclosed machine housing. - All units fitted with extraction hoods and relevant extraction ports; cover plate with suction connector. - Fully encapsulated housing for a clean operating environment.

Stanje: rabljeno, Leto izdelave: 2018, Nazivni volumenski pretok: 5087 m³/h Podtlak (Pa): 2300 Motor: 7,5 kW Dimenzije: 1080 x 820 x 860 mm Teža: 154 kg Skladiščna lokacija: Nattheim Kjdpfevxk Ansx Al Nolr

Stanje: rabljeno, natančni koti in poševni rezi od 0° do 46°, z digitalnim prikazom kota Lokacija: Nattheim Klsdpfx Aswhzg Uel Nor

Stanje: pripravljen za uporabo (rabljen), Na voljo je slojni paletizer Happel. Izdelki: vreče/škatle/enote/posode/sodi, obračanje paketa: 90°/180°/270°, format palete: 800mm/1200mm, največja višina palete: 1500mm, najmanjše dimenzije izdelka X/Y/Z: 150mm/150mm/40mm, največja teža sloja: 150kg, največja zmogljivost paletizacije: cca. 2500 kosov/h. Dimenzije stroja X/Y/Z: cca. 4000mm/2600mm/2500mm, teža: cca. 2500kg. Možen je ogled na lokaciji. Kjdpfx Asy Dup Isl Njlr

Stanje: dober (rabljeno), Leto izdelave: 2011, WALTER FWR 500/2 Format Circular Saw for Timber - Made in Poland - Documentation (DTR), CE certified - Year of manufacture: 2011 TECHNICAL SPECIFICATIONS: - Minimum processed material length: 800 mm Kjdpfxeh Dwmle Al Njlr - Maximum processed material length: 1600 mm - Maximum material width: 480 mm - Maximum material thickness: 145 mm - Saw blade diameter: 500 mm - Feed speed, stepless adjustment: 0-20 m/min - Main motor power: 2 x 5.2 kW - Feed motor power: 1.5 kW Machine dimensions: 340 x 230 x 180 cm Weight: 2500 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.860 mm, skupna dolžina: 2.800 mm, skupna višina: 910 mm, skupna masa: 300 kg, trajanje garancije: 12 meseci, Miza za obdelavo / montažo stekla. Mere 280 cm x 186 cm. Miza, dvignjena s plinskimi vzmetmi. Pokrit s steklenim filcem. Miza na kolesih - mobilna. Ostale izdelke priporočamo za steklarsko industrijo. Klodpfjgk Ay Hjx Al Ner

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.400 mm, skupna dolžina: 3.400 mm, skupna višina: 910 mm, skupna masa: 450 kg, trajanje garancije: 12 meseci, Miza za obdelavo / montažo stekla. Mere 340 cm x 240 cm. Miza, dvignjena s plinskimi vzmetmi. Pokrit s steklenim filcem. Miza na kolesih - mobilna. Ostale izdelke priporočamo za steklarsko industrijo. Kljdpfx Aljgk A Ekj Ner

Stanje: zelo dobro (rabljeno), Für Platten mit den Maßen 5600 x 2600 (2700 mm), Dicke von 2 mm bis 60 mm - Nr. 2 Doppel-Deck-Zuführrollenbahnen, 1 x 6.000 mm lang und 1 x ca. 3.800 mm lang - Hydraulischer Hubtisch (ca. 5600 x 2700 mm) - System mit Gummirädern (11 oben + 11 unten) zum Andrücken und Zuführen der Platten - Fahrbare Traverse mit 45 Saugern und 5 Auflagearmen (zur Ausrichtung des Plattenstapels) - 1. Rückseitiger Schieber mit 11 Spannzangen Kljdpfoxvc Rzsx Al Nor - Drehtisch (für 90°-Drehung der Platte) mit Kunststoffrädern - 1. Plattensäge AH8 580 - max. Schnittbreite 5600 mm (max. Sägeblattüberstand 165 mm) - Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) - Hauptsägesystem (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) - Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 - 150 - Fahrbare Quertraverse mit 7 Schiebergeräten für geschnittene Platten - Mit 4 Auflagearmen (zur Ausrichtung des Plattenstapels) und 3 motorisierten Ketten - 2. Rückseitiger Schieber mit 25 (27) Spannzangen/Greifern - 2. Plattensäge - max. Schnittbreite 2700 mm (max. Sägeblattüberstand 165 mm) - Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) - Hauptsägesystem (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) - Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 - 150 - Restholzentsorgungssystem mit VECOPLAN-Zerkleinerer (55 kW) - Tisch mit Kunststoffbeschichtung für den Zuschnittauslauf - Stapelsystem für geschnittene Platten mit 2 vorderen Auflagetischen mit Luftausblassystem 400 x 6300 mm + 8 Hubtischen (4 x 1300 x 1600 mm und 4 x 1300 x 1410 mm) - Gesamtanschlusswert: 130 kVA

Stanje: rabljeno, Leto izdelave: 1996, Charge weight: 260 liters External tank diameter: 1,300 mm Tank diameter / tank height: 1,150 / 500 mm Working basin width: 300 mm Motor power: 1.5 / 3.0 kW Motor speeds: 985 / 1,480 rpm Operating voltage: 400 V Kljdpfowa Uhpsx Al Nor Machine weight: approx. 740 kg Space requirement: approx. 1.50 x 1.30 x 1.25 m Vibratory finishing machine - Serial no.: 15770 / 96-08 - Machine ON time: 37,851 h - Timer

Stanje: rabljeno, Obtežni volumen 125 litrov Zunanji premer posode 1.000 mm Premer/višina posode 920 / 480 mm Širina delovne kadi 210 mm Obratovalna napetost 380 V Teža stroja pribl. 630 kg Kledpfxev R Hwxs Al Nsr Prostorske zahteve pribl. 1,10 x 1,50 x 1,30 m - Obratovalne ure: 4.402 h - Gumirana obloga še v zelo dobrem stanju - Zvočno zaščitni pokrov - Brez ločilne lopute

Stanje: rabljeno, Leto izdelave: 2005, Charge weight 620 liters External tank diameter 1,700 mm Tank diameter / tank height 1,550 / 600 mm Working basin width 450 mm Motor power 4.5 / 7.5 kW Motor speeds: 900 / 1,485 rpm Operating voltage 400 V Total power requirement 8.5 kW Machine weight approx. 1.6 t Space requirements approx. 2.00 x 1.70 x 1.50 m Acoustic hood mounting 3.30 x 0.60 x 0.40 m Vibratory finishing machine - Factory No.: 36225 / 05 - Machine ON: 6,469 h - Pneumatic separation flap Ksdpfjwcg D Uex Al Nelr - Timer - Pneumatic acoustic hood

Stanje: rabljeno, Leto izdelave: 1996, Charge weight 135 liters Outer tank diameter 1220 mm Tank diameter / Tank height 1,220 / 1,035 mm Working basin width 304 mm Motor power 0.75 kW Motor speed: 1500 rpm Operating voltage 400 V Machine weight approx. 600 kg Kodpfx Ajwcg Erjl Njlr Space requirement approx. 1.38 x 1.28 x 1.04 m Vibratory finishing machine - Factory No.: 15772 / 96-08 - Machine ON time: 44,854 h - with drum heating

Stanje: rabljeno, Leto izdelave: 1998, Polnilna prostornina 620 litrov Zunanji premer posode 1695 mm Dolžina posode (raztegnjena) 3800 mm Kledpew Hnr Ijfx Al Nor Širina delovne kadi 430 mm Število vrtljajev 900 - 1485 obr/min Obratovalna napetost 400 V Skupna priključna moč 7,5 kW Teža stroja pribl. 1600 kg Potreben prostor pribl. 1,80 x 1,70 x 1,30 m - Tovarniška št.: 18585/98-03 - z brezstopenjsko nastavitvijo vrtljajev (frekvenčni pretvornik) - s pnevmatsko ločevalno loputo

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, število ravnalnih valjev: 6, širina transportnega traku: 1.300 mm, najv. debelina jeklene pločevine: 1 mm, širina tuljave: 1.250 mm, dolžina rezanja (maks.): 6.400 mm, premer ravnalnega valja: 70 mm, potrebna širina: 3.500 mm, zahteva za prostor dolžina: 18.275 mm, potrebna višina: 4.000 mm, Enoosebno upravljanje, hiter dostop do številnih različnih pločevin, avtomatska menjava pločevine, standardne pločevine ostajajo nameščene na napravi; zgornje pločevine so manj pogoste vrste; varna rešitev pomične vzpenjalne pomoči za nakladanje zgornjih odvijalnih enot; programabilna razrezovalna naprava z 8 pari nožev v stacionarni izvedbi; rezalni noži so izmenično razporejeni za rezanje z majhnim zvijanjem; krožni noži AL p s premerom 100 mm za čim manjši rez; 7,2 m dolg trak za izvoz trakov Ksdpfxjxwc E Ij Al Njlr Tehniška risba naprave v pdf je predstavljena zrcalno!

Leto izdelave: 2017, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MAXI 91-2, The machine has been thoroughly inspected by IBS and the pump has been newly sealed. Current photos will follow Kodpfx Aloudz D Uo Nslr Easy handling thanks to a fully automatic cleaning process, allowing skilled workers to focus on other important tasks. The wash tank is filled with a mixture of water and IBS special water-soluble cleaner (cleaning solution). The soiled parts are placed in the rotating wash basket and the lid is closed. Once the desired washing temperature and time are set, the device is switched on and the cleaning solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed on its own axis. The pump units draw the cleaning solution from the wash tank and deliver it through six stainless-steel spray pipes with overlapping flat jet nozzles. With uniform rotation of the motor-driven basket, the workpieces are intensively blasted with hot cleaning solution from all sides. After completion of the cleaning process, the device switches off automatically. Benefits: - Two horizontally arranged pumps - Six stainless-steel spray arms arranged in a three-dimensional pattern - Robust stainless-steel construction - Additional small-part cleaning basket made of stainless-steel (diameter 170 mm) - Rotating wash basket made of stainless-steel, V-belt drive via separate motor - Steam extraction - Stainless-steel perforated screen with filter basket above the wash tank - Low water level protection - Individually height-adjustable stand feet Technical Data: - Tank/basket capacity: 190 l - Tank/basket diameter: 910 mm - Load capacity: 200 kg (optionally 300 kg) - Temperature range: 0–60 °C - Working height: 500 mm - Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm - Weight: 150 kg - Heating power: 6 kW - Spray volume: 2 x 6600 l/h - Material: stainless steel - Electrical connection: 8 kW / 400 V / 50 Hz - Pump pressure: 2.5 bar

Leto izdelave: 2016, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Immediately available! Pumps have been overhauled and newly sealed! Pictures will follow as soon as the machine is in stock! Description Function Easy operation thanks to a fully automatic cleaning process, allowing specialists to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing solution). The soiled parts are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and duration, the device is started and the solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed on its axis. The pump units draw the solution from the wash tank and distribute it via 6 stainless steel spray pipes equipped with overlapping flat spray nozzles. The parts are intensively sprayed from all sides with the hot solution as the motor-driven basket rotates evenly. After the cleaning cycle finishes, the device switches off automatically. Features • 1 pump, vertically mounted • 3 three-dimensional stainless steel spray pipes • Durable stainless steel construction • Additional stainless steel small parts cleaning basket (diameter 170 mm) • Rotating stainless steel wash basket, gear ring drive via separate motor • Suction filter before the pump shaft • High spray pressure • Steam extractor • Stainless steel sieve plate with filter basket above the wash tank • Water shortage protection Technical Data Tank/Basket capacity: 85 l Tank/Basket diameter: 780 mm Kjdpfx Aehvzy Asl Nelr Load capacity: 150 kg Temperature range: 0–60 °C Working height: 500 mm Dimensions (W x D x H): 1130 x 1010/1220 x 1150/1730 mm Weight: 90 kg Heating power: 4 kW Spray output: 4800 l/h Material: Stainless steel Electrical connection: 4.8 kW / 400 V / 50 Hz Pump pressure: 3.1 bar

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 04/2027, vrsta vhodnega toka: trifazni, Doja Tec model: BK2-VA z regulatorjem hitrosti izvedba iz nerjavečega jekla za prekrivanje izdelkov Kjdeyy Sk Ijpfx Al Nolr priključek 400 V, 16 A CEE vtičnica + stisnjen zrak Mere: 3000 x 970 x 1380 mm (ŠxGxV) rabljen stroj Možnost: Dostava do pekarne

Stanje: novo, x-axis travel: 3000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Klodpfjhqnl Tjx Al Ner Pump power for flushing: 37 kW Control system: Siemens PLC touch screen, directly usable DXF files Output pressure: max. 5500 bar Abrasive feed system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor to monitor abrasive supply to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is compressed to pressures of up to 5500 bar. Depending on the requirement and the workpiece, this is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. As the waterjet technology processes materials without heat input, no deformations occur. By adding an abrasive, waterjet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible manufacturing allows for both vertical and angled cuts. We are happy to accept your individual CAD data. Waterjet technology offers great advantages for industry, trades, and custom prototype production. It also scores points in terms of environmental impact, as the waterjet process operates dust- and steam-free and is material-efficient. Waterjet Cutting: Sample Gallery What already sounds impressive in theory is even more remarkable on the finished object. We have compiled a selection of images to demonstrate our capabilities with waterjet cutting. Browse through our sample gallery to get an impression of the possibilities offered by this modern machining process. Waterjet will also find the right solution for your project! Advantages - No deformations in the cut area - Cutting without thermal influence - Material-saving - High precision: +/- 0.1 mm - Cutting area: x = 3010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and angled cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, steam- and dust-free We cut everything All materials formed to shape: - Aluminum - Steel - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble - Tiles - Composites - Promat cutouts - Rubber - Plastics - Plexiglass Optional: Oil cooler ..... €10,725.00 Water filter system..... €1,430.00 Sludge extraction system ..... €10,725.00 Professional water treatment system..... €10,725.00 An oil cooler must be present during commissioning!!! Necessary for operation longer than 1 hour. Further videos:

Stanje: novo, x-axis travel: 4000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump output for flushing: 37 kW Control: Siemens PLC touch screen, direct import of usable DXF files Max. output pressure: 5500 bar Abrasive delivery system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor for monitoring abrasive feed to the nozzle Sensor for monitoring pump pressure Ksdjd Ab Uuopfx Al Njlr In waterjet cutting, water is pressurized up to 5500 bar. Depending on the requirements and workpiece, it is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. Since the waterjet process works without heat input, material deformation is avoided. By adding abrasive, waterjet cutting achieves maximum precision with tolerances of +/- 0.01 mm. Our flexible production enables both vertical and bevel cuts. We are happy to receive your custom CAD files. Waterjet technology provides significant advantages for industry, trade, and custom prototyping. It is also environmentally friendly as waterjet cutting operates dust-free and steam-free, while also conserving material. Waterjet cutting: example gallery What already sounds impressive in theory is even more striking in the finished product. We have compiled a selection of images to demonstrate our capabilities in waterjet cutting. Click through our sample gallery to see what is possible with this modern processing technology. Waterjet will find the ideal solution for your application! Advantages - No deformation in the cutting area - Cutting without thermal input - Material saving - High precision: +/- 0.1 mm - Cutting area: x = 4010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and bevel cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, dust- and steam-free We cut everything! All materials shaped, including: - Aluminium - Steel - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble - Tiles - composites - Foam material cuts - Rubber - Plastics - Plexiglas Optional: Oil cooler                                                                € 10,725.00 Water filtration system                                              € 1,430.00 Sludge extraction system                                            € 10,725.00 Professional water treatment system                        € 10,725.00 An oil cooler must be present during commissioning!!! Operation for longer than 1 hour is only possible with an oil cooler.

Leto izdelave: 2020, stanje: dober (rabljeno), Stroj je v odličnem stanju. Deli, ki so prikazani ročno, niso priloženi. Kledpoukficjfx Al Nsr

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), SANDMASTER FG2-20-2-9 Shot Peening Machine Drive for Nozzle Traverse: 0.10 kW, Lighting: 24 W, Blasting Pressure Range: 0.5 - 8 bar, Abrasive Grain Size: 0.1 - 0.30 mm, Fan Motor: 250 W, Filter Surface Area: 1 m², Pressure Drop in Filter Housing (Inlet - Outlet Total): 170-250 Pa, Noise Level with Built-In Silencer: 62 dBa, Electrical Connection Voltage: Socket 3 x 400 V 50 Hz, 16A (3P+N+E), Compressed Air Connection: min. 1/4" air line with hose nipple for compressed air hose with 13 mm inner diameter, Required Compressed Air Quality: ISO 8573-1, Class 1.7.2, Maximum Traverse Length: 350 mm. Kedpsfcpxujfx Al Njlr