Mil-Tek 205 Ts nakup rabljenega (14.453)

Stanje: dober (rabljeno), Starter Tekno Gbedpfxofivi Io Am Est -Type: CA80 -Voltage: 24 V -Weight: 9 kg

Stanje: novo, Leto izdelave: 2026, Production time for the machine approx. 3.5 months Very robust machine with high pressing force - Also suitable for already producing a saleable briquette quality, depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development and expertise + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted) * cools the pressing tongs (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a stretch. Large pre-compactor chamber + €1,975 net Recommended for lightweight input materials such as planing shavings Customs tariff number: 84793010 Briquette diameter: 65 mm Godpfxjffh Atj Am Eebt Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (depending on material): up to 110 kg/h* Last test: approx. 87 kg/h *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,925 mm Width: 1,100 mm Height: 1,500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Press tong cooling option: yes, with special accessory of coolable press tongs Cooling of the press tongs via a water tank (must be supplied by the customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette option: yes (material-dependent) CE compliant . Requirements for the raw material: - The moisture content (oven dry basis) must be at least 6% and no more than 18% - Maximum chip length: 15 mm - Installation temperature: heated room of at least +5°C - The feed material must be free of metal and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: rabljeno, Regulator za vroče kanale PSG NR 4 06 6 x kanal, 220 V Cena: 1.450 evrov Gbedpfsg Htcvex Am Ejt Kontaktna oseba: gospod Rainer Eckerle

Stanje: rabljeno, Leto izdelave: 2012, skupna masa: 1.310 kg, nosilnost: 205 kg, doseg roke: 2.750 mm, model krmilnika: IRC5, natančnost ponavljanja: 0,05 mm, Year 2012. The IRB 6640 is ABB’s latest robot for heavy-duty lifting applications. Designed to replace its predecessor, the IRB 6600, it offers six axes of movement and a maximum payload of 205 kg, making it well-suited for demanding tasks. Its robust design is ideal for material handling, machine tending, or spot welding applications. The standard IRB 6640 version features a horizontal reach of 2.75 m. This floor-mounted model can bend backward to provide additional accessibility. The ABB 6640 can be operated with either the S4C+ controller or the IRC5 controller, with the latter as its default configuration. Gsdpoh D Sz Tofx Am Eobt

Stanje: rabljeno, Wegoma table saw offered. Model: TS 250 For more information, please call us or send an email. Gbedjgmb Agepfx Am Est

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40 mm, reversible multiple times, Rotor diameter: 260 mm, Control unit: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 cbm, Hydraulically operated pusher, Screen perforation as required (15–40 mm), Extraction port Ø 160 mm, Weight: approx. 1,300 kg, Gjdpfogmfa Asx Am Esbt Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options available at extra cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for sectional floor, 4-sided + €2,170 net (Prevents pusher blockage. Recommended when shredding plastics, paper, veneer with thickness < 3 mm). - Raise shredder by 30 cm (ready for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Conveyor belt and overband magnet controls + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Raw material requirements: - Mineral contamination such as sand, stones, etc., leads to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us via freight forwarder, and we will document the test with photos and videos.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, trajanje garancije: 12 meseci, vhodna napetost: 230 V, Certificirano po DGUV do: 07/2027, vhodni tok: 2 A, vhodna frekvenca: 50 Hz, lastna masa: 35 kg, vrsta vhodnega toka: Klimatska naprava, moč: 0,4 kW (0,54 KM), električna varovalka: 10 A, NOVO NOVO Stroje za gnetenje testa Model: SP 10 NOVO NOVO Zaščitni pokrov z izklopom Vrhunski spiralni gnetilec za do 10 kg testa Brezstopenjsko nastavljiva hitrost Preverjeno po DGUV V3 – samo pri nas Priključek 230V Teža 35 kg Mere: 300 x 510 x 450 mm, ŠxGxV Godpfogu Nfwox Am Esbt Stroj za testo NOV 12 mesečna garancija + storitev rezervnih delov Obiščite naš velik park pekarskih strojev!

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, trajanje garancije: 12 meseci, vhodna napetost: 230 V, Certificirano po DGUV do: 06/2027, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, električna varovalka: 10 A, NOVO +++ NOVO Stroj za gnetenje testa Model: SP 15 NOVO +++ NOVO Gjdpfx Amegu Nf Ej Ejbt ... za vaše najboljše teste! Zaščitni pokrov z izklopom Namizni stroj za največ 8 kg moke Spiralni gnetilec za največ 15 kg testa Hitrost brezstopenjsko nastavljiva Le pri nas preizkušeno po DGUV V3 Priklop: 230V Mere: 340 x 550 x 450 mm, ŠxGxV Stroj za testo NOVO Z garancijo in servisom rezervnih delov Obiščite naš velik park pekarskih strojev!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, skupna višina: 1.060 mm, lastna masa: 4.300 kg, nosilnost: 4.000 kg, skupna masa: 4.300 kg, skupna dolžina: 6.000 mm, skupna širina: 3.000 mm, širina mize: 3.000 mm, višina mize: 1.063 mm, brez hidravlične agregatne enote Gbedpfx Ameqagvzj Eot

Stanje: rabljeno, Sigmatek IPC Pentium 300CF – removed from Krauss Maffei KM 18 C3 - Taken from a running machine - Fully functional Manufacturer: Sigmatek Type: 300CF Gbsdpsltrptsfx Am Ejt Spare part number: 5 Condition: used

Leto izdelave: 2016, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Miltenyi Biotec CliniMACS Plus Magnetni celični separator, letnik 2016. Gjdpfx Amet E Hl Ie Esbt Naprava Miltenyi Biotec CliniMACS Plus, kataloška številka 44085, je sistem za ločevanje celic, zasnovan za klinično ločevanje ciljanih celic oziroma odstranjevanje nezaželenih celic iz krvnih pripravkov. Avtomatizira postopek ločevanja celic v sterilnem okolju, kar omogoča ločevanje in zbiranje različnih frakcij v ločenih vrečkah. Sistem je široko uporaben v regenerativni medicini, adoptivni imunoterapiji in manipulaciji presadkov. Celice se v pripravljalni vrečki magnetno označijo in nato ločijo, kar zagotavlja visoko čistost in odličen izkoristek. Z optimiziranimi protokoli sistem združuje ponovljivost ter enostavnost uporabe. Tehnične specifikacije: Dimenzije: 70 cm x 60 cm x 90 cm (š × g × v) Teža: cca 35 kg Vhodna napetost: 100–240 V~ Poraba energije: 350 W Zaslon: 10,1'' TFT zaslon na dotik Vrste vhodnega materiala: levkafereza, kostni mozeg Procesni koraki: Deplecija in obogatitev celic s pomočjo magnetnega ločevanja Naprava je v dobrem delovnem stanju. Oglejte si tudi naše ostale ponudbe.

Leto izdelave: 2016, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Miltenyi Biotec GentleMACS Octo Dissociator z grijačima. GentleMACS Octo Dissociator s grijačima je stolni instrument za potpuno automatiziranu i standardiziranu disocijaciju ili homogenizaciju tkiva do osam uzoraka istovremeno. Opremljen sa osam individualnih grijaćih jedinica i brojnim optimiziranim, unaprijed definiranim gentleMACS programima, ovaj uređaj nudi potpuno automatizirani radni proces za disocijaciju tkiva. Uz to, uređaj korisnicima omogućuje kreiranje vlastitih programa za gotovo bilo koji biološki materijal. Svaka od osam pozicija može raditi neovisno. Jednostavno i reproducibilno dobivanje jednokomornih suspenzija ili homogenata omogućeno je korištenjem jedinstvenih C Tubes ili M Tubes epruveta. Ove jednokratne gentleMACS epruvete omogućuju pripremu uzoraka u zatvorenom i sterilnom sustavu, čime se osigurava visok stupanj sigurnosti korisnika i minimalizira mogućnost unakrsne kontaminacije. Primjene: GentleMACS Octo Dissociator s grijačima opremljen je raznim programima za potpuno automatiziranu disocijaciju tkiva u jednokomorne suspenzije, uključujući: Gsdpst E Hncefx Am Esbt - mišji ili ljudski tumor - srce novorođenih miševa ili štakora - neuronsko tkivo - mišja slezena, pluća, lamina propria, epidermis ili jetra - mišji ili štakorski skeletni mišić - i druge vrste tkiva Također, korisnički definirani programi omogućuju stvaranje potpuno automatiziranih radnih procesa i za druge vrste tkiva. Uređaj je u dobrom radnom stanju. Pogledajte i ostale naše oglase.

Leto izdelave: 2022, stanje: skoraj kot novo (rabljeno), SencorpWhite CeraTek TA12-P/2 Heat Sealing Machine Manufacturer: SencorpWhite Model: CeraTek TA12-P/2 Function: Heat Sealing Device / For sealing medical pouches / Pouch sealing machine Year of manufacture: 2022 Condition: As new (hardly used) Product Description The precision continuous band sealer of the CeraTek P/2 series is a versatile tabletop precision sealing unit, designed for sealing medical pouches and other precision sealing applications. The TA12-P/2 is a 12″ model – Maximum seal width 11.5” (approx. 30 cm). Standard Features - Top heat PLC with touchscreen HMI - Closed-loop temperature control - Short cycle alarm - Electronic pressure regulation - High/low temperature alarm - High/low pressure alarm - Resettable cycle counter - External output connections - CE and ISO 11607 compliant - Category 3 safety reset - 115 Volt +/- 10% Scope of delivery as per photo series No guarantee is given for the correctness, completeness, and up-to-dateness of the information. Gedpsvdp N Dsfx Am Eebt

Stanje: rabljeno, Leto izdelave: 1996, Technical details: X-axis travel: 762 mm Y-axis travel: 510 mm Z-axis travel: 560 mm Control: Heidenhain TNC 415 OR 360 Tool magazine with: 21 positions Table clamping area: 865 x 510 mm Table load capacity: 455 kg Tool holder: SK40 Spindle speeds: 60 - 8,000 rpm Feed rate: X/Y/Z; 15,000 mm/min Rapid traverse speed: X/Y/Z: 24 m/min Compressed air requirement: 5.5 bar Total power requirement: 30 kVA Motor power, spindle motor: 11.0 kW Spindle torque: constant from 60 - 750 Nm Machine weight approx.: 4.3 t Machine dimensions approx. (LxWxH): 2.6 x 2.8 x 2.6 m Dimensions of cooling unit (LxWxH): 2.7 x 0.8 x 0.8 m Machining center with automatic tool changer Through-tool coolant supply (IKZ) and coolant system via nozzles Chip and coolant tray Gbsdpfsu Idmvsx Am Eet Lubrication system via ball screws Handheld control unit Heidenhain TNC 415 – conversational or ISO operation (machining cycles: deep hole drilling; tapping; slot milling; rectangular and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be inspected under power. i.D. *

Leto izdelave: 2026, stanje: novo, *Only the neodymium overband magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have extremely high holding force and cannot be compared to ferrite magnets. Extremely high separation efficiency, depending on the material height and input material. Probably the most compact overband magnet on the market. Competitors often use the less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and discharged sideways once outside the magnetic zone. Gedpsdubpuefx Am Eebt This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer *depending on the maximum length of the metal pieces. Ideal for separating nails from wood chips. Optionally used in a single-shaft shredder with extraction. Requirements: * Your belt width or effective inner width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material flows less than 12 mm high, as well as chip lengths less than 25 mm. ----- Optional at extra cost: Cross and incline conveyor demo units from €8,770 net

Stanje: rabljeno, Flow monitor Gjdpsdnn Hwjfx Am Eebt - Voltage: 24 V - Dimensions: 105/105/H265 mm - Weight: 1 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, obratovalne ure: 6 h, Še ena strojna enota takoj na voljo! Zelo robusten stroj z visoko stiskalno silo - primeren tudi za proizvodnjo prodajne kakovosti briketov* (odvisno od materiala). Velik premer stiskalnega cilindra in 80 mm briket to omogočata. Naša najbolje prodajana serija briketirnih preš + Preizkušena, enostavna tehnika za izjemno nizko dovzetnost za napake + 25 let izkušenj, nenehen razvoj in strokovno znanje + Več tisoč strojev v uporabi pri zadovoljnih strankah + Odlično razmerje med ceno in zmogljivostjo Doplačilo za hladilno napravo: + 4.995 € neto (možno tudi naknadno) *hladi stiskalno čeljust in hidravlično olje (priporočljivo, če stroj deluje neprekinjeno več kot cca. 3,5 ure) Premer briketa: 80 mm Sprednja puša: 125 mm Maks. hoda briketa: 100 mm Optimalen hod briketa: 80 mm Zmogljivost (odvisno od materiala): do max. 200 kg/h* *odvisno od nasutne gostote *na podlagi nasutne gostote 200 kg/m³ Moč motorja: 9,2 kW 400 V / 50 Hz / 3 faze Dolžina: 2095 mm Širina: 1600 mm Višina: 1700 mm Teža: 1250 kg Količina olja: 220 litrov Premer silosa: 1200 mm Volumen silosa: cca 1 m³ Gbjdpfxoxfwde Am Ejt Črpalka: 75 litrov Hidravlični predstiskalnik Možnost hlajenja stiskalne čeljusti: da, s posebno opremo Možnost hlajenja hidravličnega olja: da Hlajenje stiskalne čeljusti in olja s hladilno napravo (dodatna oprema) Možnost nadzora nivoja polnjenja: da Možnost izdelave briketov v traku: da (odvisno od materiala) Možnost povečanega polnilnega drsnika: da, s posebno opremo CE skladnost Zahteve za vhodni material: - Vsebnost vlage mora biti med 6 % in največ 15 % - Največja dolžina ostružkov: 20 mm - Temperatura postavitve: ogrevan prostor pri najmanj +5°C - Dovod mora biti prost kovin in mineralnih nečistoč kot so pesek, kamenje ipd. Poškodbe stiskalnih orodij in/ali povečana obraba so lahko posledica.

Leto izdelave: 2001, stanje: dober (rabljeno), Multifunction punch, punch, hole punch, pneumatic hole punch - Pneumatically operated - Year of manufacture: 2001 Gbodjb A H U Ispfx Am Est

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 2000X Year of manufacture: 2018 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-Axis travel: +/- 70 mm Gsdpfx Amot I Dtno Esbt Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V Generator Achievable surface finish: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm, incl. KIT 50 option Incl. automatic wire changer (AWC) Submerged wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from two sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D Incl. glass scales for X and Y axes VISION 5 control system 15" LCD colour screen, short-stroke keyboard, and mouse Incl. Conic-Plus option for improved taper cutting Incl. Threading Expert Dimensions (L x W x H): 2095 x 1950 x 2232 mm Net weight: 3,600 kg The machine is completely overhauled and tested by us. A customised test cut is available on request. We also offer on-site commissioning and training for this machine.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna masa: 9.000 kg, največja višina reza: 1.200 mm, največja širina rezanja: 1.100 mm, premer valja: 1.400 mm, skupna širina: 2.100 mm, skupna dolžina: 2.400 mm, vhodna napetost: 220 V, dolžina tračnega lista: 10.450 mm, širina tračne žage: 206 mm, moč: 90 kW (122,37 KM), lastna masa: 19.000 kg, hitrost rezanja: 40.000 mm/min, Oprema: kabina, Prodamo celotno žagalno linijo z vertikalno tračno žago VTZ 1400 PLUS proizvajalca Mebor. Ponudba vsebuje: - Vertikalna tračna žaga VTZ 1400 PLUS proizvajalca Mebor - Robusten transporter za hlodovino z nakladalnimi rokami - Freza za hlode - kanter BM900 proizvajalca Mebor Gbodpjxq Rgyefx Am Est - Kabino za operaterja vertikalne tračne žage - Valjčne in verižne transporterje - Linijo za robljenje VR800 S proizvajalca Mebor s servo vodenim, visokohitrostnim pozcioniranjem krožnih žag - Dvoosno večlistno krožno žago VC 900 D proizvajalca Mebor - Linijo za odpadke - Sekirasti drobilec odpadkov TH200/500/3 proizvajalca Rudnick & Enners - Linija za sortiranje 47-14 proizvajalca Holzmatic

Stanje: rabljeno, skupna masa: 5.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/1990, naslednji pregled (TÜV): 06/2025, * Cisterna za asfalt * Tandem os * Zavori na stisnjen zrak * Osi Rinner Attersee * Hidravlična črpalka Gedex I Uufjpfx Am Esbt ----Interna številka vozila: 11642-----Pridržujemo si pravico do napak in vmesne prodaje Na voljo je podpora prek WhatsAppa! Za vprašanja glede vozila ali dodatne informacije nam pišite prek WhatsAppa Whatsapp Whatsapp

Stanje: zelo dobro (rabljeno), Del primeren za: osebna vozila Tehnično stanje: zelo dobro Optično stanje: zelo dobro Gedpfex N R Rfsx Am Ejbt

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, Two used TEKA scrapers are being offered for sale. 1. THS 4020, year of manufacture 2009, scraper arm: 16.00 m, Godpfx Amev Tb A Io Eebt 2. THS 6022, year of manufacture 1993, scraper arm: 16.00 m. Fully operational. For further details, please refer to the nameplate.

Stanje: dober (rabljeno), Leto izdelave: 2009, Conveyor belt, belt conveyor, transport belt, conveyor belt system, corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller line, roller track with stripper conveyor, transfer station - Manufacturer: Grenzebach, conveyor belt transport belt type ZFT with lifting unit - Speed: frequency-controlled - Conveyor belt length: 2440 mm Godev Tl Ubspfx Am Esbt - Belt width: 400 mm - Drive: SEW-Eurodrive 0.075/0.37 kW 280-1400/14-72 rpm - Lifting unit: see photos - Quantity: 1x conveyor belt available - Dimensions: 2450/1370/H970 mm - Weight: 390 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 17.050 h, potovalna razdalja osi X: 670 mm, pomik osi Y: 830 mm, pomik po osi Z: 600 mm, skupna masa: 20.000 kg, največja hitrost vretena: 18.000 obr/min, število osi: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It is equipped with a Heidenhain iTNC 530 control system, a new spindle with 5,700 operating hours since 2021, and a robust spindle speed of 18,000 rpm. The machine offers a large travel range with dimensions of 670/830/600 mm and supports 96 tool stations. Additional features include internal coolant supply with 60 bar pressure, a comprehensive coolant system, and a chip conveyor. Take advantage of the opportunity to purchase this versatile POSmill H 800 U machining center. Contact us for further information. Additional equipment: • New spindle since 2021: only 5,700 spindle hours (spindle replacement due to wear) • Machine inspection under power possible Machine advantages Technical benefits: Gbjdpjx D Dx Ajfx Am Eet • Air-through-spindle feature • Internal coolant supply: 60 bar • Coolant unit with 1,000 l paper band filter • Rotating viewing window • Chip rinse gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement system • Heidenhain 3D touch probe • Mobile electronic handwheel • Kinematic package Additional information: Spindle replaced due to wear (new spindle: 5,600 hours since 2021). Production hours: Control powered on: approx. 33,300 hours, Spindle powered on: 17,050 hours (new spindle 5,600 hours, replaced in 2021 due to wear). Tool stations: 96; includes tool holders (shrink-fit chucks, collet chucks, etc.).