Multifunktionsstanze sobe

Tekna TK280 HG9

Stanje: novo, – Manually operated Ksdpfx Aslwpr Redkelp – Shaft size 30 mm – Weight 30 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006,

Stanje: kot nova (razstavni stroj), ►►► FRONIUS TPS 3200 SET – OFFER ✅ Scope of Delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULSE SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard-equipped with Flow Control, Thermocontrol, and coolant filter. The chiller will automatically shut down if the water cooling fails or overheats to protect the hosepack. These features alone cost approx. €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our opinion, the most sensible feed case; wire is safely stored in a closed case. ➤ Fronius Long Intermediate Hosepack – Each unit is supplied with a 5-meter connection hosepack between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach spots! The hosepack is neatly placed on a hook attached to the side of the machine. (Hooks are custom-made by us) ➤ Fronius Large Trolley – Probably the best trolley with cylinder holder on the market. ➤ Binzel Hosepack – With up/down amperage control on the torch. ➤ Earth Cable 3-4m ➤ New Messer Pressure Regulator ➤ New Drum Adapter for large wire reels This unit can weld almost all materials, including aluminium, steel, and stainless (V2A). It has pulse wire programs and is suitable for MIG brazing (CuSi), commonly used in bodywork and sheet metal workshops. Additional options available at extra cost E.g. Fronius Aw4000/Aw5000 Job Master hosepack (torch display) + EUR 550.00 ----- Kljdpowbil Sofx Adkop IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the units? For your information, we purchase nearly-new used units, fully strip and inspect them, replace wear parts as needed, and only release them for sale after successful test welding. All machines are clean and have no burn or melt holes in the displays, nor are they covered in burn marks or dents! You buy from us an item that is ⭐worth seeing and not worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community EU supply, we can issue a net (tax-free) invoice. ►►►Which payment methods do you offer? Advance bank transfer or cash upon personal collection. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always keep 60-80 units in stock – exclusively Fronius, no other brands! We are experts with these machines and never sell anything we do not know inside and out.

Stanje: novo, - Shaft diameter 30 mm - Rotates clockwise and counterclockwise - Emergency stop - Documentation Kljdpfxslzgwhj Adkep - 230V

Leto izdelave: 2004, stanje: dober (rabljeno), številka stroja/vozila: 2004-3-11A, - Manual feed of the milling unit - Working table height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 250 mm - Max. milling height: 150 mm - Max. milling depth: 80 mm - Max. milling length: 305 mm - Angle-adjustable fence left & right: 20° – 90° - Spindle speed: 4,500 rpm - Drive: 400 V, 3.2 kW - Compressed air connection: 6 – 8 bar - Air consumption per work cycle: 10 l Klsdof E Higspfx Adksp - Pneumatic profile clamping - Table base frame - Space requirement: approx. W 1,100 x H 1,300 x D 700 mm - Weight: approx. 200 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Power: 1.5 kW, materials: plastic/aluminium, intended use: welding and processing operations, operating pressure: 7 bar, machine dimensions (X/Y/Z): approx. 1500 mm / 1500 mm / 1800 mm, weight: approx. 150 kg. Accessories included. On-site inspection possible. Kjdpfjukhz Iex Adkjlp

Leto izdelave: 2007, obratovalne ure: 4.100 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj ni več potreben za našo proizvodnjo, zato je naprodaj. Stroj je v naši lasti od leta 2007 in je redno vzdrževan. Vse deluje normalno. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: 5-osni stroj za obdelavo profilov Namenjen za fleksibilno in učinkovito obdelavo aluminija Avtonomno pozicioniranje sponk Maksimalna delovna dolžina: 9.300 mm 12 pnevmatskih sponk Magazin za orodje s kapaciteto 20 orodij in žagin list 500 mm Kodpfswwtw Djx Adkelp Delovne ure vretena: 4100 h Dodatne tehnične specifikacije na zahtevo

Leto izdelave: 1987, stanje: dober (rabljeno), for cutter diameter up to max.: 300 mm Saw stroke manually adjustable: 550 mm Manual feed via spindle: 150 mm Ksdpfxoghl Emj Adkelp Height adjustment via spindle by hand approx.: 130 mm Table semicircle diameter: 500 mm Saw blade drive: 380 V, 2.2 kW Saw blade speed: 2700 rpm Space requirement approx.: 1000 x 900 x 1300 mm Weight approx.: 100 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2007, I-beam - flat 50 x 10 mm I-beam - upright 80 x 15 mm Angle steel 50 mm Kjdpfx Ast U R H Usdkelp Round bar material 30.0 mm Raw diameter max. 1 1/2" mm Solid material diameter 30.0 mm Weight 0.185 t Dimensions L-W-H 670 x 530 x 1350 mm Square material 40 x 40 x 3 mm Tubes 60 x 2.0 mm Total power requirement 0.75 kW Demonstration unit Equipment: - Machine stand - Foot switch - Standard rollers (split) - Horizontal and vertical bending possible

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 521 PVC ÜÇLÜ SU TAHLİYE MAKİNESİ, • Possibility to mill drainage channels on PVC profiles Kodpsra Nqtjfx Adkolp • Independent operation of the three groups • Capability of the drainage system to operate in an angled position • Pneumatic profile clamping system • Fully automatic operation