Maurer With Integrated Smoke Generator nakup rabljenega (41.027)

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, pritisk: 16 letvica, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, temperatura: 400 °C, vhodna napetost: 6.000 V, vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 1.500 obr/min, vrsta hlajenja: zrak, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Due to a revision of long-term industrial strategy, an industrial Howden KK&K TWIN CA46 steam turbogenerator, complete according to original OEM supply, is available for sale. The unit is BRAND NEW, entirely manufactured and tested at OEM level, but has never been installed or put into service. It remains covered by the manufacturer’s warranty and is stored in a closed, controlled environment. Immediate availability eliminates the standard lead time, which for this class of equipment is typically 24–36 months. Nlsdpfoyidvdox Abijg Main scope of supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Double-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Key design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Rated speed: 1,500 rpm Electrical generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless design, ready for grid-parallel operation Included systems: - Integrated base-mounted oil system - Main mechanical oil pump and auxiliary electric pump - Local control panel on skid - Control and protection panel with Siemens SIPROTEC 5 - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Process steam energy recovery - Biomass and waste-to-energy facilities - Combined generation of electric power and process steam Condition and status: - Condition: NEW - Manufacturing year: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning possible with OEM support Possible application fields: - Biomass and waste-to-energy plants for the production of electric power and process steam, with immediate unit availability and no multi-year production lead times - Industrial cogeneration (CHP) in facilities with continuous process steam consumption (paper, food, chemical, manufacturing industries) - Revamping/repowering of existing plants as a rapid alternative to new OEM units with 24–36 month lead times Price: on request. Further technical details and documentation available upon request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Double Finisher 842 Multimatic with Control System, Year 09/2006, Original Price €20,110 Rotatable Garment Former and Trouser Topper Mounted on a Single Column Finishing Process in an Enclosed Cabin Integrated Cabin Exhaust Automatically Controlled Doors Close Automatically Flexible Processing of Various Garments and Sizes Computer Control with Nine Freely Programmable Memory Slots Airflow Regulation for Particularly Sensitive Garments Nljdsgtiddepfx Abijg Space-saving Design and Minimal Workplace Load from Finishing Process Externally Steam-Heated or Fully Electric with Built-in Electric Steam Generator Looking for an all-rounder for jackets & more? – Multimatic Double Finisher 842 With the Multimatic Double Finisher 842, jackets, blazers, coats, trousers, and similar items can be finished automatically. The machine consists of a form finisher and a trouser topper. Both units are mounted rotatably on a single column. For finishing, the loaded module (form finisher or topper) is swiveled into the cabin. The doors close automatically, and the finishing process takes place inside the closed cabin. Automatic finishing, high performance, energy-saving, quiet operation, minimal space requirements. Year 09/2006, original price €20,110 Machine runs flawlessly Financing through our bank is available. komplett-konzept.leasingo.de You’ll find more new and used machines in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Funkcionalnost: nepreverjeno, Leto izdelave: 2019, obratovalne ure: 28.160 h, številka stroja/vozila: Z3.03.04.02, vrsta upravljanja: CNC krmiljenje, proizvajalec krmilnikov: PRIMA Power, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: IPG-Faserlaser, laserska moč: 6 W, dolžina mize: 4.100 mm, moč: 6 kW (8,16 KM), Oprema: menjalnik šob, Description: The Laser Genius LGf 2040 from PRIMA Power is a high-dynamic fiber laser cutting system, ideal for demanding metal processing and series production. Main features: Nlodpfxswv U N Ss Abijg - 6 kW IPG fiber laser for lowest operating costs and maximum uptime - Working area 4,100 × 2,100 × 150 mm – precise cutting of steel, stainless steel, and aluminum up to 25 mm material thickness - Positioning accuracy of ±0.03 mm and traverse speeds up to 240 m/min - Automation: Compact Tower 10-pallet change system for uninterrupted material flow - ATC nozzle changer and integrated extraction/filter system - Control: Intuitive Prima Power CNC touch panel - Condition & Documentation: good used condition, regularly maintained, documentation available. Professional dismantling by PRIMA Power scheduled for June 2025 Current location: 41849 Wassenberg (ready for collection) Price & Financing: Asking price net €390,000,- ex works On request, we are happy to provide you with individual leasing or financing offers Images of the machine in dismantled condition can be found at the end of the listing. Note: Sale is carried out without warranty/liability; inspection possible by appointment.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Tekol / Trumpf Laser Welding System Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 Extraction Unit Description: For sale is a professional laser welding system Tekol LAP S4 with integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction unit. This system is a closed precision laser welding station for fine, pinpoint, and low-distortion welding of metal components. The pulsed laser enables highly controlled heat input, clean weld spots, and consistent, repeatable results. Ideally suited for precision engineering, tooling, mold repair, prototyping, and small-batch production. Closed safety enclosure with safety system, control unit, rotary indexing table, and extraction/filter system. Technical Specifications – Tekol LAP S4 Operating voltage: 400 V ~ N / PE Current type: 3~ 400 V, 50 Hz Rated current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel distances X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary indexing table: 2-position Technical Specifications – TRUMPF TruPulse 44 Laser Laser type: Nd:YAG pulsed laser Nodpezizpcofx Abislg Wavelength: 1064 nm Max. average power: 42 W Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical Specifications – TBH GL 230 Extraction Voltage: 230 V / 50–60 Hz Power: 0.36 kW Airflow (free blowing): approx. 390 m³/h Effective airflow: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound level: approx. 51 dB(A) Weight: approx. 40 kg Multi-stage filtration system: Pre-filter Particulate filter Activated carbon filter Total weight approx. 900 kg Condition: used Scope of delivery: (see image) Laser welding system Tekol LAP S4 TRUMPF TruPulse 44 laser unit TBH GL 230 extraction unit Documentation / binders / data carriers Keys and accessories as shown in photos (Specifications and technical details subject to change and error!) For further questions, please do not hesitate to call us.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 900 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 395.900.219.1159, potovalna razdalja osi X: 600 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, skupna višina: 2.700 mm, dolžina mize: 800 mm, skupna masa: 4.150 kg, GF AgieCharmilles FORM E 600 – EDM stroj za obdelavo z utapljanjem Leto izdelave: 2019 Delovni čas: približno 900 ur Stroj je v odličnem, popolnoma delovnem stanju. Uporabljan je bil le za zelo omejeno število testnih in poskusnih operacij in nikoli ni bil uporabljen za neprekinjeno serijsko proizvodnjo. Tehnične specifikacije: Gib osi X: 600 mm Gib osi Y: 400 mm Gib osi Z: 400 mm Velikost mize: 800 x 600 mm Maksimalna velikost obdelovanca: 1.000 x 700 x 400 mm Maksimalna teža obdelovanca: 1.000 kg Ločljivost pozicioniranja: 0,1 μm Najboljša površinska obdelava: Ra 0,2 μm Tok generatorja: 140 A Prostornina rezervoarja za dielektrik: 650 l Integrirana os C Maksimalna teža elektrode na osi C: 25 kg Maksimalna hitrost vrtenja osi C: 80 vrt/min AC FORM HMI z 19-palčnim na dotik občutljivim zaslonom Nledezyn E Eopfx Abijg ISPG (inteligentni generator hitrosti in moči) Steklene skale na osi X/Y Avtomatsko vpenjalno pripravo EROWA ITS-50 Menjalnik elektrod Sistem za požarno zaščito 6 integriranih filtrskih vložkov Napajanje: 3 x 400 V, 50/60 Hz Stisnjen zrak: 6–8 bar Povezava LAN: 10/100 Mbit/s Dimenzije/teža stroja: Višina stroja: 2.700 mm Teža stroja: približno 4.150 kg Stroj se trenutno nahaja v našem obratu v Kocaeliju, Turčija, in je na voljo za pregled. Dodatne fotografije, videoposnetki in druge informacije so na voljo na zahtevo.

Stanje: rabljeno, Stationary Extraction System with Filtration Unit TEKA Filtercube 4H HV 11kW Stationary extraction system with filtration unit TEKA Filtercube 4H HV 11kW - TEKA Precoat Dosing Unit: Protects filter cartridges against clogging - Year of manufacture: 2018 - Serial No. 9501442110402 - Filter control with automatic filter cleaning - Motor power: 11 kW - High-performance fan with integrated controls - SelfClean Version Equipment: - 4 standard filter cartridges; filter area varies depending on airflow capacity - Display-controlled filter cleaning - Fan control - Elbow silencer for upward air discharge - Smoke and dust are reliably separated with a filtration efficiency of over 99% Online video inspection possible via WhatsApp, MS Teams, or Telegram In stock in Emskirchen/Nuremberg - Immediately available - Test possible Nlodpfx Aezav Ebebiog

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Swift-Cut CNC plasma cutting machine Type 1250 with zoned downdraft table Technical Data: - Cutting area for sheet formats up to 1250 x 1250 mm - Maximum portal clearance height: approx. 100 mm - Lowered guide rails for easy loading - Portal park position allowing full sheet loading from above - Sturdy steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on the Y-axis. - Digital Torch Height Control (DTHC) – rapid response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC control interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power source). - Hypertherm plasma system error messages displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the machine in a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Downdraft table - Zoned downdraft table for efficient fume extraction - Easily removable cutting supports - Free-standing operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network interfaces Software: - Solid Edge CAD program - Swift-Cam 1 powered by Libellula; CAD/CAM program - Features include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cut tools and photos for recognizing consumables - Parts library with pre-made standard drawings - Swift-Cut CNC control software - Program cut path simulation - Operating system Windows 7 Included optional paid extras: - Swift-Trace camera for scanning hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Base dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm Nljdjy Snwnepfx Abiog

Stanje: rabljeno, Leto izdelave: 2024, Integriran SIAD-ov industrijski sistem za kompresijo vodika (249 kW) - Proizvajalec: SIAD Macchine Impianti (kompresor), SAEP & FLOVEX (izmenjevalniki), Capelli & Cie (posode). - Tip: Celovit sistem kompresorja vodika, zasnovan za obratovanje v nevarnih območjih ATEX Zone 2. - Uporaba: Povečanje tlaka plina vodika (H2) za kemično obdelavo, mobilnost in shranjevanje energije. Tehnične specifikacije - SIAD HMS4-2 kompresor (2024): 249 kW | 384 kg/h | 0,1 do 3,5 bar(g) | ATEX Zone 2 - IIC - T3. - SAEP izmenjevalnik plina R-36050 (2024): 248 L prostornine | 10 bar(g) | -20 do +200 °C. - FLOVEX hladilnik olja (2024): BEM/OTT 403.4-13-2 | ASME VIII Div.1 | 10 bar(g). - Capelli glavna odzračevalna posoda (2024): 10.250 L | ogljikovo jeklo P265GH | -1 do +0,5 bar(g) | 2.310 kg. - Capelli rezervoar za kondenzat (2024): 1.140 L | nerjavno jeklo 316L (X2CrNiMo17-12-2) | 730 kg. Načelo delovanja in ključne značilnosti: Vodik pri nizkem tlaku (0,1 bar) se s pomočjo 249 kW SIAD-ove enote poveča na 3,5 bar(g) pri pretoku 384 kg/h. FLOVEX in SAEP izmenjevalniki upravljajo s toplotno regulacijo, medtem ko 10.250-litrska Capellijeva posoda absorbira udarne tlakove v sistemu. - Skladnost z ATEX: Certificirano za nevarna okolja plinske skupine IIC v coni 2. Nlsdpfeztw Upsx Abieg - Robustna metalurgija: Izdelano iz jekla P265GH in nerjavnega jekla 316L za dolgo življenjsko dobo pri uporabi z vodikom. - Modularna enota: Sistem, ki se enostavno vključi in uporablja, združuje kompresijo, hlajenje in odzračevalno shranjevanje.

Leto izdelave: 2015, stanje: generalkompletno obnovljen (rabljeno), Laboratory gas generator with a capacity of 12.5 liters/min and a residual oxygen content of 0.5%. The unit has been completely overhauled by us, Airtech Stickstoff GmbH, as an authorized partner of Parker. We can also handle the servicing for you. Nlodpfjn R Naujx Abisg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 67 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1591 / 1592, premer žaginega lista: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automated process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is managed via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. The horizontal punching unit can be deactivated if needed. Nedjyyzxhepfx Abijlg Sawing range & feed: 500–550 mm saw blades Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm Continuously variable speed control Up-cut sawing, motorized feed Material feed: 3–800 mm, reversing up to 4,000 mm Ball screw spindle with servo drive and round shaft guide Offcut: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching unit: Vertical and horizontal hydraulic punching (discharge side) with automatic oil cooler Punching force: 2 × 150 kN Stroke: ≤ 20 mm Vertical stroke infinitely adjustable (also suitable for embossing) Horizontal punching cylinder can be switched off separately Double-stroke cycle time: 2x 2–3 seconds Punch waste is discharged laterally from the machine frame Conveyor belt 250 × 800 mm for parts removal Equipment: 2 pneumatic clamping cylinders (vertical, pressure-reduced) 3 chip extraction nozzles Ø 100 mm, potential-free contact for extraction control Minimum quantity spray unit with 2x 3-litre tanks and level indicators Noise protection package: hood and saw blade guard with internal insulation Roller conveyor (740 mm) with reach-in protection on infeed side Sturdy stationary frame, working height: 960 mm Manually opening safety hood Saw blade housing below the tabletop Max. cutting range: Profile height: up to 65 mm Profile width: up to 135 mm Technical data: Dimensions (W × D × H): approx. 311 × 153 × 197 cm A total of 2 units available. ----- Attractive offer – flexible & worry-free We offer not only a high-quality product, but also tailored financing options that suit your needs. Whether it’s a down payment, installment plan or individual financing models – together, we’ll find the right solution. On request, we can also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don’t have to worry about a thing. 📞 Please contact us for further information or a non-binding offer. We provide personal and competent advice. Subject to prior sale, changes and errors excepted!

Stanje: dober (rabljeno), obratovalne ure: 5.579 h, Crown SC 5360 1.8 Electric Forklift Truck The SC Series forklifts provide the power, manoeuvrability, and reliability required to meet both application and operator demands. Their advantage stems from the optimal balance of attention to detail, advanced technology, a solid foundation, and application-oriented ergonomics. Whether in indoor or outdoor use, the SC Series forklifts offer a work environment designed to simplify the operator’s job. The position of the D4 armrest can effortlessly be adjusted both vertically and horizontally with one hand. The SC forklifts offer excellent all-round visibility in all directions. Robust masts with double-T profiles provide superior resistance to longitudinal, lateral, and torsional bending forces. Integrated sideshifter with fork carriage protects the cylinders and helps prevent hydraulic oil leaks. Crown-developed and manufactured electric motors with industry-leading thermal protection ratings. Symmetrical box frame design helps reduce frame distortion caused by collisions. Rugged steering axles with heavy-duty tapered roller bearings withstand impacts from uneven surfaces and loading ramps. Easy Maintenance Crown’s Access 1 2 3 technology delivers reliable onboard diagnostics and real-time control of all forklift systems, significantly simplifying maintenance and giving operators greater confidence. The e-GEN braking system replaces conventional friction brakes, delivering advantages in performance, servicing, and costs. It enables controlled use of the regenerative motor brake depending on operating conditions and reduces pedal forces as well as long-term maintenance needs. The battery is top-accessible for quick and easy maintenance. Technical Data Manufacturer: Crown Model: SC 5360 1.8 Electric 3-wheel forklift Nlsdpfeya Da Hsx Abisg Weight: 2.88 t Standard tyres: 2x/2 Model series: SC 5300 Overall width: 1123 mm Turning radius: 1.694 m Fork length: 1600 mm iForks weighing forks Drive system: D Rated load capacity at LSP: 1.8 t Load centre: 500 mm Lift height: 3.5 m Voltage: 48 V Drive motor(s): 9.6 kW Lift motor(s): 7.9 kW Travel speed, with/without load: 16 km/h Lifting with/without load: 0.56/0.37 m/s Lowering with load: 0.56 m/s Overall height: 2260 mm Battery weight: 0.962 t New steering pump motor (2025) Operating hours: 5579 iForks weighing forks for forklift – new price €4,300 Financing through our bank is also available: komplett-konzept.leasingo.de Find more items – both new and used – in our shop! International shipping available on request!

Stanje: rabljeno, Schuppenauslage mit integrierter Presswalze / Stream Delivery with Integrated Pressing MBO ASP 66-2 ME Year of manufacture: 1999 - Max. working width: 660 mm - Speed: min. 30 m/min - max. 160 m/min - Stream delivery with integrated pressing rollers - Mobile design - Built-in control unit - Spreading for multiple-up streams - Marking by 2 cm offset - Light barrier and counter - Equipment for two-up production Nledpfetzc Scjx Abieg - Integrated pressing station - Continuous stream delivery Online video inspection possible via Skype video. We would be pleased to welcome you for a visit—more machines in stock. Available immediately—can be inspected In stock in Emskirchen / Nuremberg—testing possible

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, HOLZ-HER CNC Dowel Drilling & Insertion Machine POWER-PIN 7605 Workpiece thickness: 12 – 60 mm Workpiece width: minimum 150 mm (horizontal & vertical processing) Workpiece length: min. 60 mm, max. unlimited (limited when aligning to positioning stops) Software: Campus V8 Power-Pin (1x license) Continuous LED strip for easy operation guidance and status indication Dowel insertion unit DA102 for pre-glued as well as natural dowels in combination with white glue Glue system LS2 with electronic monitoring of the nozzle needle Nlodpfx Aboyzg Dfoijg ECO MODE for energy-efficient operation Drilling unit BA102 (horizontal) 3-spindle MOT3 package – motorized adjustment of drilling depth 2D Barcode Scanner 21.5" Touchscreen The POWER-PIN dowel machine can be used both as a standard dowel inserting machine and as the perfect addition to, for example, nesting or console machines. From cabinet furniture to high-quality solid wood drawers starting at 12 mm material thickness, the 7605 is the ideal solution for precise drilling and insertion of wooden dowels. The continuous LED strip always shows the machine status and assists the operator by displaying the correct insertion position for the workpiece. The integrated barcode scanner can capture DataMatrix codes, for example, which contain all processing information for the workpiece. Drilling positions and drilling depths are automatically set and approached by the machine – for maximum precision and efficient processes. The machine was reconditioned in the Voitsberg factory and the software updated to the latest version as of the time of refurbishment! Delivery, installation, and operator training for the machine can be arranged directly through us for an additional charge. The machine is currently located in our delivery warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be legally binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table size / working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power Supply: 400 Volt / 50 Hz Additional modifications / optimizations compared to the original machine: - External stroke adjustment - New, cross-machine reproducible tool length adjustment system - Additional limit switches for end position monitoring - Machine safety door with monitoring (integrated into emergency stop circuit) - Machine enclosure below the safety door with chip guard and tool rest - Electrical sensing of the clamping jaws (tool removal control to prevent unintended retraction of the drawbridge) - Coolant swivel system with solenoid valve controlled over the swivel process (to activate coolant before broaching stroke – visual check of lubricant flow, no dry cutting!) - Electrical wiring routed in protective steel conduits - Heavy-duty control cabinet mounting for receiving machine components - Additional oil-tight drip tray on the control cabinet - 3-sided enclosed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel sheet with permanent labeling - 4 central lubrication points for trapezoidal spindle drive Remark: The machine is fully overhauled, and the machine body has been completely refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - The coolant system (pump, solenoid valve, and drain tap) including the coolant/lubricant swiveling system is new Nljdpfx Ajw Ighisbieg - The clamping jaws are new - The entire electrical system (control cabinet) is new - All metal sheets and covers are new - The following components have been overhauled and re-used: - Machine base - Machine stand - Machine table with table insert - Drawbridge (clamping jaws are new) - Gear wheels - Electric motor (new brake, new bearings) The machine is available in our warehouse and can be inspected under power. The attached pictures are original photos of the machine. The machine is marked with the “CE” label. This “CE” conforms to the state of 1998 (first overhaul).

Stanje: rabljeno, Leto izdelave: 2010, Območje delovanja X = 4.600 mm Y = 1.535 mm Z = 275 mm Zasnovan za obremenitve, kar ga naredi idealnega za obdelavo velikih kosov masivnega lesa in konstrukcijskega lesa. Obdelovalna glava z 5-osno krmiljenje omogoča izdelavo kompleksnih tridimenzionalnih izdelkov. • Osrednji sistem mazanja • Namizni računalnik (PC) o Procesor Intel Celeron D, 2,66 GHz ali višji o 512 MB RAM o Trdi disk 40 GB o 15-palčni LCD-monitor o Tipkovnica o Miška o Optična enota (CD-ROM) o Vzporedni priključek o Serijski priključek RS-232 o USB-priključek o Omrežna kartica Ethernet za povezavo z pisarniškim omrežjem • Oddaljeno servisiranje o Neposreden dostop do modema za oddaljeno diagnostiko in servisiranje • Električna nadzorna omara • Klimatska naprava za električno omaro Nlsdpfszlz Svsx Abieg • Varnostni sistem o Dve varnostni ploščici, občutljivi na pritisk, na sprednji strani stroja z integrirano krmilno enoto, ki zagotavljata varno izmenično delovanje. • Signalne luči za izmenično (nišno) delovanje stroja • Funkcija nadaljevanja obdelave o Omogoča nadaljevanje obdelave po izrednem ustavitvi. • Varnostni sistemi v skladu s standardom CE Delovna miza in dodatna oprema • Večcončna miza za 10 nosilcev in 40 vakuumskih nosilcev o Omogoča istočasno nalaganje večih delov, kar zmanjšuje število menjav orodij in povečuje produktivnost. o Vakuumski sistem vpenjanja o Pnevmatski sistem vpenjanja • 10 nosilcev ATS, vsak opremljen s 4 vakuumskimi nosilci, L = 1.525 mm • Elektronsko pozicionirana miza EPS za 10 nosilcev • Zadnja vrsta opornikov za 10 nosilcev z 115 mm giba • Dodatna vrsta opornikov na 375 mm z 140 mm giba • Dodatna vrsta opornikov na 770 mm z 140 mm giba • Sprednja vrsta opornikov na 1.175 mm z 140 mm giba • 4 stranski oporniki z 140 mm giba (2 levi + 2 desni) s pripadajočo montažno opremo • 2 dodatna stranska opornika z 140 mm giba (1 levi + 1 desni) s pripadajočo montažno opremo • Senzorji položaja za vse opornike • 4 dvižna orodja za lažje nalaganje in razkladanje delov za module H = 74 mm • Vakuumski modul 132 × 146 × V74 mm • Vakuumski modul 132 × 75 × V74 mm • Vakuumski modul 132 × 54 × V74 mm • Sistem vpenjanja UNICLAMP • Komplet za izdelavo oken H = 74 mm, 40–98 mm • 6 sponk UNICLAMP z dvojnim delovanjem in sistemom hitrega priklopa • 2 modula UNICLAMP za kratke dele • Transportni trak za žagovino in odpadke • Vakuumski generator za vakuumsko črpalko 250 m³/h o Vakuumksa črpalka 250 m³/h • Vreteno in oprema za obdelavo • Moč motorja: o 12 kW pri 12.000 vrt/min (obremenitev S1) o 15 kW pri 12.000 vrt/min (obremenitev S6) • Največja hitrost vretena: 22.000 vrt/min • Vmesnik za orodje: HSK F63 • Os C: neprekinjeno 360° • Os B: ±100° • Hladilna enota s 1.600 W hladilne moči • Magazin za 15 orodij za 5-osno glavo • Dodatna nosilna roka Z za zadnje enote • Elektrovreteno PEAK POWER z močjo 8,6 kW, vmesnikom HSK F63 in zračnim hlajenjem, posebej zasnovano za aplikacije, ki zahtevajo visok navor pri nizkih hitrostih vretena • Rotacijska enota osi C, ki jo poganja menjalnik (360°) • Vrtalna enota BH9 o 9 neodvisno krmiljenih vreten za vrtanje o Vključuje: o 5 vertikalnih vrtalnih vreten z razmikom 32 mm o 2 neodvisni horizontalni vrtalni vreteni z dvojnim izhodom o Ločen pogonski motor 3 kW • Magazin za 22 orodij z razmikom središč 180 mm • Avtomatski sistem mazanja Na voljo sta dva kompleta orodij Leitz za 22.000 EUR + DDV: • Komplet orodij LEITZ IV 68 • Komplet orodij LEITZ IV 90 Ta stroj se prodaja v imenu stranke. Ogled je možen po predhodnem dogovoru. Za dodatne i

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 7 kW (9,52 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: zrak, skupna masa: 124 kg, okoljska temperatura (maks.): 40 °C, temperatura okolja (min.): 5 °C, vhodna napetost: 400 V, pritisk: 3,2 letvica, volumenski pretok: 2,22 m³/h, ogrevalna zmogljivost: 4,5 kW (6,12 KM), vhodna frekvenca: 50 Hz, Oprema: Na voljo je tipska ploščica, Device was used in a test facility and operated only for a short period. Like new! High-performance process thermostat LAUDA Variocool VC 7000 for precise temperature control in industrial applications. Ideal for use with water or water/glycol mixtures, reliable within a range of –20 °C to +80 °C. Featuring air-cooled condenser, SmartCool system, and integrated programmable control, the unit offers high efficiency, user-friendly operation, and versatile application possibilities. LAUDA Variocool VC 7000 – Process Thermostat Technical Data: Operating temperature range: –20 °C to +80 °C Cooling capacity: • 7.0 kW at +20 °C • 5.3 kW at +10 °C • 3.7 kW at 0 °C • 2.4 kW at –10 °C Nodjxfiiispfx Abijlg • 1.3 kW at –20 °C Heating capacity: max. 4.5 kW Pump specifications: up to 3.2 bar / max. 2.22 m³/h (37 L/min) Filling volume: max. 64 liters Ambient temperature: +5 °C to +40 °C Type of cooling: Air-cooled Input voltage: 400 V; 3/N/PE; 50 Hz Current consumption: 15 A Power consumption: max. 8.8 kW Connection: IEC 60309, 5-pin, CEE, red, 16 A Dimensions (W×D×H): 650 × 670 × 1250 mm Weight: 124 kg Features: Color display with set/actual value indication and temperature profile Electronic PID controller with high stability (±0.1 K) SmartCool system for energy-efficient cooling control Standard USB interface, optionally expandable (e.g. Ethernet, Profibus) Programmable controller with up to 150 segments Simple operation via plain text menu in 6 languages

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 37.297 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.400 mm, pomik osi Y: 2.300 mm, pomik po osi Z: 1.000 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 40 m/min, proizvajalec krmilnikov: Siemens, model krmilnika: 840D sl, širina mize: 1.500 mm, višina mize: 30 mm, dolžina mize: 2.000 mm, obremenitev mize: 2.000 kg, največja hitrost vretena: 18.000 obr/min, delovne ure vretena: 12.486 h, moč vretenovega motorja: 24 W, število mest v zalogovniku orodij: 21, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale is an EiMa CNC-controlled 5-axis machining center, Type Sigma M, featuring a fixed gantry and a traversing table, designed for precision machining of aluminum and finishing operations in steel. The machine was developed for high accuracy, rigidity, and large travel ranges, making it ideally suited for demanding milling, drilling, and sawing tasks in the metal and aluminum profile sector. Year of manufacture: 2013 Power-on hours: approx. 37,297 h (as of November 2025) Spindle runtime: approx. 12,486 h total (as of November 2025) AXIS TRAVELS & DYNAMICS: - X 3,400 mm · Y 2,300 mm · Z 1,000 mm - Feedrates: X/Y 60 m/min, Z 40 m/min STRUCTURE & TABLE: - Heavy-duty steel frame, precision linear guides, servo drives, automatic central lubrication Nledpfxjx H Ib Nj Abieg - Traversing table 2,000 × 1,500 mm, 30 mm thick, threaded grid 100×100 mm - Max. table load 2,000 kg SPINDLE & TOOL CHANGER: - 24 kW HSK 63 A spindle, up to 18,000 rpm, water-cooled - Disc-type tool changer with 20 positions + 1 pick-up station (for tools up to Ø 500 mm) 5-AXIS HEAD: - C3 fork-type head, swivel ranges approx. C ±200°, A ±120°, high positioning accuracy MEASUREMENT TECHNOLOGY: - m&h wireless probe (workpiece measurement) - BLUM laser (tool measurement) EQUIPMENT: - MMS unit (internal & external lubrication) - Full enclosure, separate tool change chamber - Mist extraction with electrostatic separator (approx. 1,900 m³/h) already integrated CONTROL: - Siemens 840D sl, 5-axis package, Advanced Surface, TCP - 15" operator panel, remote maintenance ready ACCURACY: - Repeat accuracy approx. ±0.012 mm SPECIAL FEATURES: - Machine under power – demonstration possible at any time - Direct from production – not a dealer sale - Complete technical documentation available - Support with dismantling, loading and transport possible (at extra charge) HIGHLIGHT: - New replacement spindle from Omlat included (value approx. €25,000) NOTE: - Collection possible only in January/February All details provided to the best of our knowledge. Subject to change, error, and prior sale.

Stanje: dober (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, TEXA Konfort 760 Touch RID incl. integrated refrigerant analysis for refrigerant R1234yf KONFORT 760 TOUCH, complete with 10" touchscreen display, 20 kg refrigerant tank, 100 l/min flow rate, dual-stage vacuum pump, Bluetooth and Wi-Fi interface. Equipped with vehicle database, protective cover, and manual. TECHNICAL SPECIFICATIONS - Suitable for R134a or R1234yf - Suitable for buses (760 Touch BUS) - Fully automatic service control - Automatic leak detection - Refrigerant measurement with electronic scale - Oil contamination protection system – ATB (Air Tight Bottle – patented) - Automatic oil management with electronic scales - Measurement of recovered oil volume with electronic scale - Compatible with hybrid vehicles - Automatic service management (DATABASE) - Manual service control - Safety system FPS (Fan Protection System) - Internal flushing when changing oil type - Service report printout via Wi-Fi 10" touchscreen display - Compatible with KONFORT App - 20 kg refrigerant tank (760 TOUCH) - 30 kg refrigerant tank (for 760 BUS TOUCH) - Filling accuracy: +/- 15 g - High refrigerant recovery rate (over 95%) - Dual-stage vacuum pump - Automatic oil container recognition (patented) - Scale lock feature Operating modes: DATABASE / MANUAL SERVICE / MY DATABASE - Multilingual software - Automatic compensation for service hoses - Automatic maintenance management - Simplified maintenance - Automatic control of non-condensable gases Njdpfx Abewzhnrsislg - Remote customer support - Highly accurate automatic oil injection - Automatic updates Includes POE oil container for hybrid vehicles Includes thermal printer

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 37.000 h, model krmilnika: Siemens Sinumerik 840 D, laserska moč: 3.200 W, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 115 mm, TEHNIČNE PODROBNOSTI Laserska moč: 3.200 vatov Gib X: 2.500 mm Gib Y: 1.250 mm Gib Z: 115 mm Debelina pločevine iz konstrukcijskega jekla, maks.: približno 20 mm Debelina pločevine iz nerjavečega jekla, maks.: približno 15 mm Debelina pločevine iz aluminija, maks.: približno 8 mm Nljdpfxsz A D Ire Abisg PODROBNOSTI O STROJU Nadzorni sistem: Siemens Sinumerik 840 D Skupna priključna moč, približno: 88 kVA Delovne ure stroja: 74.000 ur Delovne ure laserskega žarka: 37.000 ur Dimenzije in teža Potreben prostor: 8.660 x 6.110 x 2.700 mm Teža stroja: približno 7.300 kg OPREMA Zaprt okvir stroja z integriranim laserskim modulom Avtomatski menjalnik palet Barvni zaslon TFT Laserska dioda za pozicioniranje Naprava za brizganje Pogonska enota za natančno obdelavo Dodatna, visoko dinamična os Yp Pogoni z vzdrževalno prostimi trifaznimi servomotorji Zaprt sistem usmerjanja žarka Transportni sistem za majhne dele in odpadke TRUMPF laser CO2 laser TruFlow 3200 Visokofrekvenčna spodbuda Vzdrževalno prijazno turboradialno puhalo Mešalnik plinov (integriran) Nadzor laserske moči Funkcija dnevnika laserskega delovanja Laserska glava za rezanje s 5-palčno lečo Laserska glava za rezanje s 7,5-palčno lečo Univerzalni sistem za hitro menjavo orodij ControlLine Nadzorni sistem SINUMERIK 840D Avtomatski izklop ContourLine SprintLine Oddaljena podpora (teleservis) Microweld Omrežna povezava RJ45 Omrežna povezava preko telediagnostike Označba CE Svetlobne pregrade Večkomorni sistem za odsesavanje Kompaktni sistem za odpraševanje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: U1060515116, Oprema: Na voljo je tipska ploščica, Lincoln Electric Precision TIG 375 – TIG Welding System with Water Cooling (TEC ARC TC2000) For sale is a high-performance TIG welding system, model Lincoln Electric Precision TIG 375, ideal for demanding industrial welding applications. Technical Highlights: - AC/DC TIG welding (ideal for steel, stainless steel, and aluminum) - Maximum welding current: up to 375 A - Mains voltage: 230 / 400 V - Frequency: 50/60 Hz - High-frequency (HF) ignition - Pulse function and extensive adjustment options - Foot pedal connection available Features: - Integrated water cooling unit TEC ARC TC2000 - Hose package / torch included - Robust chassis with castors - Clearly arranged control panel with precise controls Condition: Nsdpjy A Sgnefx Abielg - Used, fully functional - Normal signs of use (see pictures) - Ready for immediate operation Special Features: - Very reliable industrial-grade equipment from Lincoln Electric - Ideally suited for workshops, metal construction, and manufacturing - High duty cycle for continuous operation Scope of delivery: - Welding machine - Cooling unit (water cooling) - Torch / hose package - Connection cables If interested or if you have any questions, please feel free to contact us. Viewing and test run possible by arrangement.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2015, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 50 kg, skupna širina: 508 mm, skupna dolžina: 686 mm, skupna višina: 991 mm, vhodna napetost: 240 V, kapaciteta rezervoarja: 38 l, raven hrupa: 68 dB, vhodni tok: 5 A, Oprema: Na voljo je tipska ploščica, šasija, Dynabrade 61431 Raptor Vac Electric Portable Vacuum System, 230V (ATEX Cat. 3 for Zone 22) SYSTEM INCLUDES: • Two 6 m (20') conductive coaxial hoses with integrated air lines • “Y” connector • Two coupling joints • Two swivel adapters for vacuum hoses • Disposable collection bag • Conductive polyethylene bag • ATEX Category 3 for Zone 22, suitable for areas where hazardous dust is not normally present in ignitable concentrations in the air but may occur accidentally. • Designed for general spot extraction and cleaning. • High suction power, ideal for industrial applications with dry materials. • The bypass motor system utilizes clean air for motor cooling, thereby extending the vacuum’s service life. • Includes HEPA H14 filter with 99.995% efficiency at 0.3 microns. • Two additional HEPA filters in the motor head, providing IP6X protection. • High-grade stainless steel housing and 38-liter collection container. • The unit is static dissipative (kit included) and conductive. • Aerosol leakage test performed for quality assurance. • Equipped with a smooth-rolling transport trolley. • Dust explosion protection. DYNABRADE Description: Nodpov Uxxcsfx Abiolg Safety and fine dust separation are the specialties of the Raptor Vac Clean Air Solutions, Category 3. From the motor head to the collection container, every component contributes to fire prevention and fine dust collection. Category 3 Raptor Vacs are used to extract non-metallic dusts such as wood, composites, and plastics that occur during sanding operations. The powerful extraction supports two operators simultaneously in dry industrial applications. Two additional HEPA filters in the motor unit render the vacuum IP6X rated, providing additional dust protection for electrical components. IP6X — defined as tested complete dust-tightness.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Bacci MasterCut CNC Band Saw with Rotating Saw for Straight and Curvilinear Cuts; additionally, the machine is equipped with a spindle, enabling its use as a nesting CNC machining center and for cutting elements from panels. The machine is in excellent condition, barely used, and highly equipped. Full specification of the machine in the attachment. Maximum working cutting length along X axis = 3,000 mm Maximum working cutting length along Y axis = 2,100 mm Maximum cutting height = 150 mm Maximum cutting depth = 770 mm Work table with [6 pcs.] pneumatic clamps for securing parts 6 support rails for component backing Reference base for panel alignment along the X axis Automatic positioning of clamps and supports managed by NC Manual machine loading Front pneumatic OmniWheel rollers for panel handling Integrated gantry with 9 kW/HSK electrospindle with push-button, 18,000 rpm (maximum drilling depth 100 mm), working with a tool magazine Automatic 6-position tool changer Second drilling electrospindle 7.5 kW/ER32 with push-button, 18,000 rpm (maximum drilling depth 100 mm), mounted on the integrated gantry Two detachable side feeders for solid wood boards Parts unloading Belt conveyor for collecting parts and waste Saw power control system via inverter ("Power control system") Band saw blade dimensions 5450 x 13/16 mm Minimum radius 65 mm/95 mm with 13 mm/16 mm blade Pneumatic band saw tensioning Protective band cover Automatic lubrication system for moving machine parts Timed lubrication for band saw blade OSAI numerical control with Windows business system (operator interface) Air conditioner for numerical control cabinet Nledpfxoyzmtye Abiog CE safety standards with metal mesh guards + safety light barriers in loading and unloading zones

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2560460122, Tornos Swiss GT13/6 – Sliding Headstock Automatic Lathe CNC Control FANUC 31i-B, 6 axes, 13 mm capacity Base Machine Equipment: - 6 linear axes - Independent main and sub-spindle - Synchronously rotating guide bush - Configuration for operation without guide bush - C-axis for main and sub-spindle - Adjustable pneumatic ejector, including sub-spindle cleaning with coolant - 3-color signal tower (yellow, red, green) - Centralized lubrication - Electrical interface for Tornos bar feeder - Interface for oil mist extraction - Interface for fire protection system - Interface for customer M-function (6 inputs and 6 outputs) - Compliance with CE and EMC standards Main Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076) - Max. bar diameter without preparation: 10 mm - Max. bar diameter with preparation: 13 mm - C1 axis function Guide Bush: - Max. speed: 15,000 rpm - Max. diameter of synchronously rotating guide bush: 13 mm (with integrated motor) Guide bush type: B (853) - Max. part length in one clamping: 180 mm - Conversion kit for work without guide bush (max. travel: 30 mm) Tool System for Main Operations: - Tool holder for 5 turning tools 12x12 mm on the front carrier - Tool holder for 4 turning tools 12x12 mm on the rear side of the carrier - S11 live tool drive (10,000 rpm) for rotating tools mounted on the front of the X1/Y1 carrier - 1 drive module for cross machining with 3 spindles for ESX 16 collet (2x 10,000 rpm and 1x 6,250 rpm) - S21 live tool drive (6,000 rpm) for up to 2 driven units mounted on the rear side of the X1/Y1 carrier (driven units not included) - Tool holder with 4 bores Ø 22 mm for stationary secondary operation tools Sub-Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076), Max. Ø capacity: 13 mm - C4 axis function Tool System for Back Operations: Njdpfoyzigcjx Abiolg - Base holder for 8 rear tools; the 4 upper positions can accommodate rotating and/or stationary tools (rotating tools not included) - 4 lower positions with 4 fixed holders for ESX 16 collets - 2 stationary holders with Ø 22 mm bore (for upper positions) - S51 live tool drive (6,000 rpm) for rear working tools (max. 4 rotating tools) ----- Attractive Offer – Flexible & Worry-Free We offer you not only a high-quality product, but also tailored financing solutions to meet your individual needs. Whether a down payment, installment plan or custom financing model – together we’ll find the right solution. Upon request, we also handle the complete transport organization, from planning to reliable delivery, ensuring a smooth and punctual process so you don’t have to worry about a thing.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VT0479, VC850 Travel ranges: X 850 mm, Y 510 mm, Z 510 mm High-performance milling spindle up to 12,000 rpm as an integrated hybrid spindle with direct drive (no belt) Spindle tool interface: SK40 DIN69871 with pull stud DIN69872-A / ISO 7388-3-AD TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS on X/Y/Z axes SIEMENS 840DE control system with the following standard features: - SPINNER - SPIOS 24" touch control panel for Industry 4.0 applications - Height-adjustable, rotatable, and tiltable operating panel for optimal ergonomics - Includes engraving cycles - 24" liquid crystal color flat panel display with multi-touch functionality - User memory 2 GByte - 15 zero point offsets - 1 free USB port - Standard Ethernet port Latest SIEMENS control generation "SINUMERIK ONE": - SPINNER - SPIOS 24" touch control panel for Industry 4.0 applications - Height-adjustable, rotatable, and tiltable operating panel for optimal ergonomics - Includes engraving cycles - 24" liquid crystal color flat panel display with multi-touch functionality - User memory 2 GByte - 15 zero point offsets - 1 free USB port - Standard Ethernet port SPINNER MULTI-CONTROL WHEEL integrated in the control panel, offering the following functions in a single control element: - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed adjustment in single-block setup mode, self-resetting to 0% at end of block -> All essential setup functions combined in one control element Features: - SHOPMILL - 3D SIMULATION - REMNANT MATERIAL DETECTION - DXF READER Fully integrated 1-axis TILTING TABLE (SP), centrally mounted on work table with: - Swivel carriage approx. 580 mm long for 3-sided machining - Endless swivel range of the A-tilt axis - Counter bearing for support of the rotary table bridge UNIVERSAL CHIP CONVEYOR for VC850 Spindle PREPARATION FOR HIGH PRESSURE for use of auxiliary tank up to 22 bar HIGH PRESSURE TANK 22 bar Additional air blast at the spindle head Njdpfxjy S Tpio Abielg Central compressed air feed through milling spindle as an alternative to flushing pistol inside the working area SPINNER STANDARD PROBE PREPARATION Wireless SPINDLE PROBE Universal robot interface (UNIROB) WORKPIECE CLAMPING HYDRAULICS, incl. 2 pcs. 4/4-way valves for hydraulic clamping up to 200 bar STANDARD DOCUMENTATION IN GERMAN consisting of machine manual and CNC manuals, provided in digital form on the control system. Printed manuals available for an additional charge. LIFTING EYE BOLTS for crane unloading, set of 4 pcs. (required for crane transport) STANDARD PAINT, two-tone in light grey RAL7035 and blue-grey RAL5008 Electrical configuration according to EUROPEAN STANDARD: Mains voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN network (5-wire system) Notes: The price includes warranty services only within Germany. For new and demo machines, the images are not necessarily of the specific machine but of comparable units. Accessories shown, such as workholding or tool holders, are only included as stated in the technical specifications. Please request a detailed ex-works quotation. Visit our production facility near Munich or one of our showrooms. We may have additional offers for comparable machines. Subject to prior sale.

Stanje: rabljeno, prva registracija: 02/1990, Leto izdelave: 1990, SPIERINGS Lattice Tower Slewing Crane / Mobile Crane Chassis: • Engine output: 222 kW / 305 hp / Displacement: 8,250 cm³ • Dimensions: 12,395 x 2,600 x 4,000 mm • Operating weight: 35,000 kg • Gross weight: 36,000 kg incl. 7,080 kg counterweight • Tyres: 445/65 R22.5 • 3 axles • 1st and 3rd axles steerable Nlodpfx Abjwmpczsiog • Rotating beacons Crane: • Max. jib reach: 30.4 m • Max. lifting capacity: 5,000 kg at 9.3 m radius • Drive type: hydraulic, hydraulic pumps electrically powered by external power supply or generator • Control type: electrically operated proportional and control valves • Max. corner load: 204 kN • Max speed: 85 km/h • Travelling possible only from the carrier vehicle! Hoist Gear: • Motor: hydraulic variable displacement motor • Gear group: 1Am • Displacement volume: 20...55 cm³ • Max. supply pressure: 260 bar • Gearbox: planetary gearbox, i=27 • Drum diameter: 375 mm • Max. rope pull: 25 kN • Corresponding rope speed: 30 m/min • Holding brake: spring-loaded multi-disc brake Trolley: • Motor: hydraulic constant motor • Gear group: 1Am • Displacement volume: 16 cm³ • Max. supply pressure: 265 bar • Gearbox: planetary gearbox, i=10.4 • Drum diameter: 200 mm • Max. rope pull: 6 kN • Max. speed: 50 m/min • With limit switch • Holding brake: spring-loaded multi-disc brake Slew Gear: • Motor: hydraulic constant motor • Displacement volume: 16 cm³ • Max. supply pressure: 300 bar • Gearbox: planetary gearbox, i=160 • Max. superstructure slewing speed: 1.3 rpm • Slew brake: hydraulic brake valve • Holding brake: spring-loaded multi-disc brake Luffing Jib Winch: • Gear group: 1Em • Motor: hydraulic constant motor • Displacement volume: 16 cm³ • Max. supply pressure: 220 bar • Gearbox: planetary gearbox, i=92 • Drum diameter: 200 mm • Max. rope pull: 38 kN • Max. speed: 18 m/min • Holding brake: spring-loaded multi-disc brake • With limit switch Load / Load Moment Limiter: • Pressure switch on the hoist motor • Mechanical switch activated by deflection of the slewing tower frame Tower: • Working height: 20.8 m • Outer tower: length 9.9 m Inner tower: 11 m Jib: • Trolley jib in lattice construction; optionally horizontal or inclined at 30° • 1st jib section: length 11 m / 2nd jib section: 11.1 m / 3rd jib section: 7.8 m - German machine! - Ready for operation! Errors and prior sale excepted! = Further information = Main jib length: 30.4 m