Luft-Und Trockentechnik Gmbh Sistem Za Dodelavo Barve nakup rabljenega (117.371)

Stanje: dober (rabljeno), Leto izdelave: 2006, moč: 3 kW (4,08 KM), Zentner Soltec stroj za pranje sit ST 100 Proizvajalec: Zentner Systems GmbH Model: Soltec ST 100 Leto izdelave: 2006 Bjdpfx Asyrndgogtjwl Serijska številka: 0505 / 06 Obratovalna napetost: 3 × 400 V Omrežna frekvenca: 50 Hz Nazivna moč: 3 kW Obratovalni tlak (zrak): 6,0 bar Izvedba: Zaprta pralna kabina za sita iz nerjavečega jekla Področje uporabe: Avtomatsko čiščenje okvirjev za sitotisk Posebnosti: – Prisotne opozorilne table EX – Integriran sistem za izpuh – Kompaktna zasnova z lastno elektro omaro Lokacija: Schierling Ogled je mogoč po predhodnem dogovoru.

Stanje: rabljeno, Dolžina 3.500 mm Globina 1.000 mm Bwodpow I Sykefx Agtjl Višina 2.000 mm Nosilnost cca 700 kg Stabilen Lübbersov sušilni voziček za barve z nastavljivim srednjim rešetkom. Na voljo: 15 kosov Cena na kos: 490,00 € + DDV.

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Special Opportunity! From government inventories, we can offer you this perfectly maintained blood analysis system, model "AutoVue Innova" from the world-renowned brand Ortho Clinical Diagnostics, complete with every conceivable extra! The AutoVue Innova is a fully automatic blood analysis system that is used worldwide—especially for the establishment and operation of blood banks. It efficiently provides blood typing as well as a wide range of additional data and has become indispensable in any large laboratory. The system was acquired by the government in 2008/2009 and has been regularly inspected and serviced. All components are in excellent optical and technical condition, with no significant damage—see pictures. It was decommissioned from routine operation in 2023 due to a new purchase and was fully operational until then. Scope of delivery: - Blood analysis system AutoVue Innova - 2 centrifuges BioVue System - 2 thermal blocks BioVue System Heath Block-32 - 3 multi-dispenser pipettes BioVue System digital - 1 digital incubator thermometer - 9 Tip Low Volume 96 Well Lock Nut Evo - 5 Sample Quadrant Blue, 5 Sample Quadrant Green, 4 Sample Quadrant Red - 3 ten-place specimen racks - 5 reagent rotors - 2 spare Philips lamps - 14 Mat Filters - 1 OrthoScan 3.50.C software, 1 TecnoSoft Resolvigen 3 software - 1 ELO touch screen, 1 METO OS-204 thermal transfer label printer with spare rolls - 1 Zebra TLP 2844 thermal transfer label printer with spare rolls - 1 Epson Perfection 4900 Photo scanner - 2 Adaptus 3800g handheld barcode readers + 1 Honeywell Eclipse MS5145 handheld barcode reader - Spare parts and accessories, manuals Dimensions: 1600 x 900 x 755 mm Bodpfjwh Tn Dox Agtjwl Weight: approx. 230 kg (AutoVue Innova only) Weight: approx. 320 kg (total weight of all components) Shipping is available at extra cost via insured freight forwarding within three business days after receipt of payment. You may also pick up the equipment yourself during regular business hours. The total system weight, including accessories and pallets, is approx. 350 kg, shipped on three pallets. Sale is strictly to businesses—you will, of course, receive an invoice with VAT shown separately. Private buyers may acquire the system "on behalf of the customer"; a direct commercial sale to individuals is explicitly not offered! The goods are sold with the exclusion of any warranty or liability for material defects. This exclusion does not apply to compensation claims due to grossly negligent or intentional breaches of duty by the seller or for any injury to life, body, or health. For questions regarding prices or technical details, please feel free to contact us at the provided address.

Stanje: rabljeno, vhodna napetost: 400 V, skupna širina: 1.400 mm, skupna dolžina: 650 mm, skupna višina: 1.650 mm, Certificirano po DGUV do: 04/2026, vrsta vhodnega toka: trifazni, Pietroberto model: GRA/SP Bwedpfevktgyjx Agtjl Stroj na kolesih Priklop 400V, vtič 16A-CEE Mere: 1400 x 650 x 1650 mm (ŠxGxV) Rabljeni stroj Na zalogi še veliko drugih pekarskih strojev!

Leto izdelave: 2006, stanje: dober (rabljeno), Welding fume extractor, dust extraction unit, self-cleaning filter, pneumatic, vacuum system by RITTER. Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter elements in good condition. The filter is pneumatically cleaned using compressed air impulses during operation, ensuring high efficiency. Designed for continuous operation. The unit features a built-in sound-insulated fan with a power rating of 2.2 kW. Airflow capacity: 1200 m³/h. Bodpfehyg Ivox Agtowl Filtration area: 10 m². Additionally equipped with an automatic spark detection and extinguishing system. Spark propagation is typically caused by production machinery operations or material contamination. Such incidents result in production downtime and company losses, and often pose serious threats to human safety. Therefore, to eliminate such hazards, pneumatic and mechanical conveying devices should be monitored for the presence of sparks and appropriately secured by using spark detection and extinguishing systems.

Leto izdelave: 1999, stanje: dober (rabljeno), Funkcionalnost: omejena funkcionalnost, !!! Important!!! The systems have now been dismantled. The system components can be inspected on site. Bwjdpfx Agoyzdm Retol For sale here are 2 fully functional SLC (Surface Like Chrome) vacuum coating systems / metallization units manufactured by PVT GmbH. A 3rd non-functional system is no longer available for sale. Complete documentation for the systems is available in paper form and will be handed over upon purchase. In order to operate the systems, a compressed air supply, power supply, and water cooling system are required and must be provided by the buyer. All other PVT processes are, of course, possible as well. The system was primarily used for processing wheel rims. Treatment of other workpieces made of aluminum, steel, or plastic is also possible, such as bathroom/kitchen fittings, motorcycle and automotive add-on parts, door and window handles, etc. What are the advantages of the SLC process compared to conventional chrome plating: - SLC coating is a high-gloss finish optically comparable to electroplated chrome - Significantly more resistant to scratches and chipping - The process is more environmentally friendly and provides outstanding corrosion resistance - Costs are considerably lower Technical data: Chamber internal dimensions approx. 1600 mm diameter, approx. 900 mm height Type: PVT 1600 SLC Manufacturer: PVT GmbH Year of manufacture: 1998/1999 Documentation: available Control: Allen Bradley PLC (automatic coating process including hardware)

Stanje: novo, Leto izdelave: 2024, Fiber Laser Cutting System FLV-3015-OE 1.5kW / VF1530-1500W Technical Parameters - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable X and Y axis positioning accuracy: ±0.03 mm - Maximum speed: 40,000 mm/min - Maximum acceleration: 0.5 G - Maximum load capacity: 1200 kg - Power output: 1.5 kW - Energy requirement: 12.0 kW - Source brand: MAX Photonics - Power supply: ~3x400 V 50 Hz - Protection class: IP54 - Length: 4500 mm - Width: 2300 mm - Height: 1920 mm Cutting Thickness - Carbon steel: recommended thickness 12.0 mm, max. thickness 16.0 mm - Stainless steel: recommended thickness 5.0 mm, max. thickness 6.0 mm - Aluminum: recommended thickness 3.0 mm, max. thickness 4.0 mm - Brass: recommended thickness 2.0 mm, max. thickness 3.0 mm Construction - Type: welded frame - Number of support legs: 8 - Servo drives: Schneider - Gearboxes and racks: helical gears Bwsdsphm Slepfx Agtol - Linear guides: HIWIN - Gearbox: Motovario - Rack: YYC - Ball bearings: NSK - Pressure regulators: SMC - Cooling: Water chiller Automatic lubrication system for axis guides. User-Friendly Operation Loading heavy sheets is facilitated by built-in transporter balls to ensure smooth sliding during loading. The collection of small finished parts is also simplified by trays under the machine, which can be pulled out using a convenient handle. RayTools cutting head with autofocus Option - Otinus Protect This product provides customized protection for your laser source. With this service, you ensure your business continuity is safeguarded. We secure your business so you can complete your orders on time. Control Panel The computer is equipped with Windows and the CypCut software, offering functions such as design, file import/export, and work optimization. Installed programs include lifetime licenses. The machine comes with a wireless controller. Expert Support We maintain constant communication with our customers. Therefore, with every machine purchased, we include a support hours package from Otinus Specialist Assist. Otinus Academy Learning Software With the purchase of this equipment, you receive one-year access to online courses for training new staff or refreshing your knowledge from previous training sessions. Free Drawing Package Every Otinus laser cutting machine comes with a package of ready-to-use CAD drawings. Included in the Price of the Machine 2-day commissioning and operator training - Day 1, up to 8 hours – commissioning and control explanation. - Day 2, up to 8 hours – independent work on the machine under supervision of our technician, including the option of programming customer-specific parts. Expert Consultation - By phone: 7:30 am to 9:00 pm (Mon-Sat) – 8-hour support package valid for 12 months. - Online: 7:30 am to 2:30 pm (Mon-Fri) – 8-hour support package valid for 12 months. Access to online training courses - LibreCad – 12 months access Additionally, you receive - CAD drawing package

Leto izdelave: 2025, obratovalne ure: 20 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H19-S, Kompletna PUR naprava za brizganje pene z vključeno vozilo. Oprema je nameščena v vozilu Citroen Jumper (letnik 2021). Vozilo je del prodaje in vključeno v ceno. Vključena oprema: • Naprava za brizganje pene H19-S. • Ogrevana cev dolžine 51 m. • Brizgalna pištola EVOPUR. • Električni mešalnik. Bwsdpeyub I Dsfx Agtol • Dve črpalki za prenos materiala. • Sistem za recirkulacijo materiala. • Kompresor Walter VGK 530-3.0/90. • Hladilni sušilnik stisnjenega zraka. • 24 kW generator, vgrajen v vozilo. Stroj ni bil uporabljen na gradbiščih, bil je redno zagonjen izključno za servis in testiranje. Sistem je v zelo dobrem stanju in je pripravljen za takojšnjo uporabo. Vozilo: Citroen Jumper. Letnik: 2021. Možen je ogled in demonstracija opreme. Prodaja avstrijsko podjetje. Cena je neto. Na voljo je račun. Možna znotrajskupnostna prodaja z veljavno EU ID za DDV.

Stanje: rabljeno, Sistem za osvetljevanje plošč / CTP Plate Maker ECRM DPX2 Bsdpfx Asytpmlegtjwl Letnik 2008 Spletni video-pregled prek WhatsApp - MS Zoom - Telegram Na zalogi v Emskirchen/Nürnberg – na voljo takoj – mogoče testirati

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2100218, HGH-SAT SR 1000 2-Tank Spray Cleaning System (Year of manufacture 2011) Industrial cleaning system in robust stainless steel design for efficient aqueous cleaning of components. Equipped with a 2-tank system (washing + rinsing), rotating basket, and fully automatic cleaning cycle. High load capacity up to 900 kg and powerful spray pressures ensure reliable cleaning results. Ideal for use in mechanical engineering and series production. Technical Data – HGH-SAT SR 1000 Bwedpfx Agoyvhtdjtsl Manufacturer: HGH-SAT Ultraschall Anlagentechnik Model: SR 1000 Version: 2-tank System type: Spray cleaning system Year of manufacture: 10/2011 Serial no.: 2100218 Electrical Data Supply voltage: 230 / 400 V Frequency: 50 Hz Rated current: 45 A Total power: 30 kW Performance Heating capacity: 24 kW Total connected load: 30 kW Tank Data Cleaning tank capacity: 350 litres Rinse tank capacity: 250 litres Process Spray pressure tank 1: 5 bar Spray pressure tank 2: 3 bar Cleaning medium: aqueous Loading Max. load weight: 900 kg Dimensions Depth: approx. 2600 mm (open) Depth: approx. 1800 mm (closed) Width: approx. 3500 mm Height: 2810 mm Mechanics Basket rotation: 4 rpm Drive: chain drive

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Cooling capacity at water supply/return temperature of 15/10°C: 2.3/2.1 kW Flow rate: 0.5 m³/h Electrical connection: 380 V, 1 kW Space requirement: 900 x 600 x 1020 mm Weight: 160 kg Water connections reduced to 1/2". Bjdpfxer Ezdre Agtewl

Stanje: rabljeno, Prašni ciklon z rotacijskim ventilom, prašni ciklon 14.400 m³/h, ciklonski sistem, rabljeni stroj Leto: 2013 Prašni ciklon: HLZ-J 1600 Bodpfsx U Amijx Agtewl Pretok zraka: 14.000 Bm³/h Vhod (sesalna stran): 400 mm Višina: 5.853 mm Premer: 1.695 mm Centrifugalni ventilator: Ventilatorenfabrik Oelde GmbH Tip: HRV 56N-400/M GL360 Pretok zraka: 14.400 m³/h Nazivna moč: 22 kW Rotacijski ventil: Ventilatorenfabrik Oelde GmbH Tip: MS 050-390 A Kapaciteta na obrat: 58 litrov Rotor z 10 fiksnimi lopaticami (celicami)

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 16 A, skupna širina: 1.400 mm, skupna dolžina: 1.500 mm, višina osnovne plošče stroja: 1.400 mm, skupna masa: 350 kg, Pozdravljeni, ponujam rabljeno Corona/Plazma napravo. Material, ki ga želite obdelati, se položi na kontinuirni trak/transportni trak. Preko senzorjev se plazma ali corona samodejno vklopi, ko je substrat pod glavo. Hitrost prenosa je nastavljiva. Transportni trak ima širino 650 mm. Naprava je na kolesih in je zato mobilno uporabna. Nameščen je tudi odsesovalni ventilator – potrebno je samo še odvajanje izpušnega zraka. Naprava je zelo primerna za obdelavo površin plastičnih materialov ali stekla za boljše tiskanje. Prav tako je primerna za predobdelavo materialov za boljše lepljenje. Za dodatne informacije me prosim kontaktirajte. Bwodpjy A Trlsfx Agtjl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 4.000 mm, skupna širina: 1.500 mm, skupna višina: 3.600 mm, delovna višina: 2.500 mm, vhodna napetost: 400 V, skupna masa: 2.700 kg, vrsta vhodnega toka: Klimatska naprava, Fully automatic Lisec desiccant filling machine A2RL-25/25RN, year of manufacture 2001 Bsdportm Sajfx Agtewl Technical data: Minimum spacer width: 6 mm Maximum spacer width: 24 mm Maximum spacer size: 2500 x 2500 mm Minimum spacer size: 400 x 400 mm Power supply: 3x400VAC/50Hz Control voltage: 24VDC The machine is in very good condition and can be inspected at our warehouse by arrangement. A frame trolley for fully automatic frame feeding is included with the machine (an additional trolley is available as an option upon request).

Leto izdelave: 2023, obratovalne ure: 10 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Here we offer a machine specifically developed for the securing of loose or cracked knots. Knots are automatically detected during continuous feed operation and fixed with hot-melt adhesive. This significantly reduces the reject rate caused by defective knots. On opaque lacquered surfaces, the knots become virtually invisible. Net Automation sets new technological standards in the diagnosis and correction of wood defects with the AELA XKI: • Greatly reduced processing times Bwedepiufwepfx Agtsl • Immediate further processing possible • Enhanced visual appearance • Extremely user-friendly operation DIAGNOSIS AND CORRECTION: • Rotten knots • Cracked knots • Resin pockets • Encased (wing) knots, etc. ..... BENEFITS: • No tear-outs during planing • Detection of dirt and batten imprints • Diagnosis with artificial intelligence (AI) • Automated fixing process The unit can be viewed and tested at our premises in 77866 Rheinau by prior arrangement.

Stanje: skoraj kot novo (rabljeno), Zero Point Clamping System For Rotary Table: Manufacturer: Vischer & Bolli GmbH Bwjdpfx Aehlu Nzsgtol Type: 07/447749/Z This zero point clamping system was used on a FIBRO rotary indexing table with a clamping surface of 2500 x 2500 mm. For Clamping Plate: Zero Point Clamping System Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z Dimensions: 2290 x 1000 x 120 mm

Leto izdelave: 2024, stanje: novo, Everything can be configured according to your wishes, with very short production and delivery times. We are happy to provide you with further information upon request. Technical data available on request. Bwsdpfjfirx Nex Agtel Standard Equipment: - Welded steel construction - DURMA CNC control unit (AURORA) - Remote diagnostic (Ethernet) - Lantek software with automatic nesting - Positioning of the sheet metal to be cut using laser - DURMA torch height control - Double-sided drive system (rack and pinion) - AC servomotors for X and Y axis movement - CNC input/output for filter unit - Starter kit for consumables - Plasma torch * - Ignition console * - Torch height control with ball screw drives on double linear guides * Optional Equipment: - Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch - Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch - CE-compliant safety wire - Automatic gas console for Hypertherm - Manual gas console for Hypertherm - Oxy-fuel cutting torch - Plasma torch protection system - Manual plasma bevel cutting head - CNC bevel cutting head (+/- 45°) - Single drilling head - Multi drilling head - Filter for 130A, 260A or 400A - Tube cutting unit Ø50 mm - Ø400 mm - Additional support for tube cutting unit - Warning lamp for errors and program end With more than 60 years of experience in the research and production of sheet metal processing machines, producing 8,000 machines annually in three technologically advanced manufacturing facilities covering a total of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally recognized manufacturers in their sector, with products distributed in 120 countries worldwide. With our branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact from Durmazlar, providing you with expert advice and support on all sheet metal processing machinery. Our demonstration center gives you the opportunity to gain an overview of our machines on site, experience first-hand the quality and precise technology of our products, and receive the best possible consultation tailored to your corporate objectives. Our mission is to be your on-site point of contact and to offer you comprehensive services including training and after-sales support. We are happy to assist you from Germany—beginning with consultation, through the purchasing process, and throughout the entire lifespan of your machine. With our German branch, we are always locally available to respond quickly and efficiently whenever you need us. We are your reliable partner for technologically advanced solutions in sheet metal processing.

Stanje: pripravljen za uporabo (rabljen), Wittmann MTC Basic-C90 F27 régulateur de température, unité de régulation thermique monocircuit Le prix s'entend pour un appareil. Plusieurs appareils disponibles! Année de fabrication : 2017 Année de fabrication : 2017 Année de fabrication : 2018 Température max : 90°C Débit pompe : 40 l/min Dimensions : env. 235mm x 590mm x 660mm (L x P x H) Poids : env. 31 kg Puissance : 10 kW Vous pouvez volontiers convenir d'une visite. Nous pouvons organiser un transport économique pour vous! Vous recevrez une facture en bonne et due forme. Pour les clients étrangers, une facture hors taxes peut également être établie, à condition de fournir un numéro de TVA valide. Sous réserve de vente préalable. Bwsdpfx Aeyw Rh Hjgtjl Visitez notre boutique et consultez également nos autres offres. Les noms de sociétés et marques mentionnés appartiennent à leurs propriétaires respectifs et ne sont cités qu'à des fins d'identification et de description des produits. Des écarts des données techniques ainsi que des erreurs dans la description de l'article sont possibles et restent réservés.

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), Wittmann MTC Primus-C90 F27 temperirna naprava, enokrožna temperirna naprava Cena velja za eno napravo. Leto izdelave: 2017 Maks. temperatura: 90°C Črpalna zmogljivost: 40 l/min Bsdpfx Ageyw Rfxetjwl Dimenzije: pribl. 235 mm x 590 mm x 660 mm (Š x D x V) Teža: pribl. 31 kg Moč: 10 kW Vabljeni na ogled naprave. Po želji vam lahko organiziramo ugoden transport. Prejmete ustrezen račun. Za tuje kupce lahko izdamo tudi neto račun, pogoj je veljavna ID za DDV. Vmesna prodaja pridržana. Obiščite našo trgovino in si oglejte tudi druge naše ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih imetnikov in služijo samo za identifikacijo in opis izdelkov. Možna so odstopanja v tehničnih podatkih kot tudi napake v opisu artikla; pridržujemo si pravico do sprememb.

Leto izdelave: 2003, stanje: rabljeno, Machine (additional): Stainless steel brewing vat Bodjvcqz Eopfx Agtswl Total capacity up to top edge of shell: 26,000 liters Diameter approx.: 3 m Shell height approx.: 2 m Material thickness: 3 mm unheated shell Width: 3.4 m Material: Stainless steel 1.4301 Base construction: on stainless steel tube supports, anchored to floor Features: External boiler, conical vapor hood (stainless steel, D = 3,200 mm), conical insulation hood (stainless steel outer diameter = 3,400 mm), 2 outlets DN200 and DN100, manhole DN600, vapor pipe (12,000 mm), internal lighting

Leto izdelave: 1983, stanje: rabljeno, Yeast propagation system featuring a steamable wort sterilisation tank rated for 2 bar operating pressure with a capacity of 2.47 hl, a second heatable and coolable wort sterilisation tank rated for 2 bar operating pressure with a 12.7 hl capacity, as well as a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar, and jacket cooling in the lower third (without cone). All tanks are equipped with agitators. The package also includes a CIP tank. The system is controlled via a Steinecker control cabinet (time-controlled). Tanks are also available individually. Additional machine details: with control cabinet and CIP tank Bwedpfevcqt Uox Agtsl Equipment: 2 wort sterilisation tanks each with agitator (approx. 2.4 hl and approx. 12.7 hl), control cabinet, CIP system, conical pressure tank with agitator.

Leto izdelave: 1991, stanje: rabljeno, The Filtrox Cross Flow Microfilter operates with a maximum transmembrane pressure of 6 bar (0 °C - 95 °C) and a filtrate volume of 4.5 - 7 hl/h, with a filtration area of 26.4 m². Two circulation pumps (20 kW each) move the unfiltered medium through the loop. Includes a 16 hl agitated tank for cleaning purposes. Machine (special feature): Yeast beer recovery 1987-1991 Capacity: 7 hl/h Permissible operating pressure: 10 bar Permissible operating temperature: 85 °C Filtration area: 26 m² Current: 4.85/2.8 A Bwsdpfjvcq Dajx Agtol Voltage: 220/380 V Frequency: 50 Hz Operation / Control: Simatic S5 Equipment: 8 ceramic membrane modules (total filtration area 26.4 m²); high-pressure pump; 16 hl cleaning tank with agitator; various pipelines, valves, measuring and control technology

Stanje: rabljeno, Leto izdelave: 2006, Fully automatic blending and carbonation system for continuous adjustment of original gravity, alcohol, and CO2 content. Beer inlet capacity: 200 hl/h Degassed water capacity: 100 hl/h Blended beer capacity: 300 hl/h CO2 supply minimum: 8 g/l >/= 99.98% purity Power consumption: 23 kW Current: 50 A Voltage: 400 V Frequency: 50 Hz Compressed air: 6 bar Length: 2790 mm Width: 1250 mm Height: 2440 mm Operation / Control: Fully automatic, control cabinet with operator panel Material: Stainless steel Equipment: Flange connections: Beer: DN80, degassed water: DN40, CO2: DN25, blended beer: DN65 Bwodpfx Agjvcqlqstel Beer pump; carbonization section; flow metering; Anton Paar measurement of original gravity, alcohol, and CO2; pressure gauges; sampling valves; various additional valves Weight: 500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, 1 Panel dividing saw with area storage Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – Right-handed machine Year: 2008 Including integrated area storage PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore storage management software, scrap management, etc. Storage area approx. 37 x 11.5 m Maximum stacking height in storage: 2,500 mm Speed Concept: Setting a completely new benchmark, revolutionizing panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage + Substantial acceleration of the pusher + Central angle alignment device + Electronic height control of the pressure beam + Optimized movement sequences with integrated gripper measurement system Cutting length: 5,600 mm Cutting width (pusher carriage travel): 5,600 mm Panel rotation device for head cuts Laser alignment light for marking the cutting line on the workpiece for visual or scribed cutting Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle feeding of sensitive single panels by vacuum, as well as efficient infeed of panel stacks Saw blade projection: 130 mm Saw carriage feed: Forward: 1–150 m/min Reverse: constant 150 m/min Pusher speed: Forward/reverse: 90 m/min (In EU countries, forward = 25 m/min) Automatic pressure beam height adjustment: yes Automatic cutting height control: yes Adjustable pressure beam clamping force: yes Adjustable gripper clamping force: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device Minimum clamping width: 0 mm Maximum clamping width: entire cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT WITH LIFTING ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTION FENCE Program-controlled ejection of part stacks into the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVING PROGRAM (AUTOMATIC) Grooving program with graphical input and process graphics. Positioning accuracy: Bwsdpsyw Ivhsfx Agtjl Groove depth continuously adjustable via control system (hydraulic stop) CUT-OUT / STRESS-RELIEF CUT PROGRAM PART LABELING WITH GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermal transfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' – JUST-IN-TIME – Additional function 'Just-in-time' (possible operating modes): 1. Optimization at the saw ----- - Import function for parts lists from industry packages, Excel, etc. - Inclusion of available remnants in the optimization - In case of production interruption, unproduced parts can be re-optimized - Free selection of which parts with which material to optimize and produce at what time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available remnants - Change panel sizes - Combine runs, etc. A new optimization then takes place directly at the saw. DATA TRANSFER ONLINE + USB PORT CAMERA MONITORING OF THE FEED AREA Material specification for lift table feeding: Maximum waviness: 40 mm/m Minimum panel thickness: 6 mm Maximum thickness tolerance per panel: +/- 0.2 mm Stacking accuracy: +/- 50 mm

Stanje: rabljeno, Ta oglas je za Millipore Elix Essential 10 UV sistem za čiščenje vode. Enota je v popolnoma delujočem stanju in pripravljena za takojšnjo uporabo. Tukaj je jasen pregled Milli-Q Elix Essential 10 UV sistema za čiščenje vode, laboratorijske naprave za pridobivanje visoko kakovostne čiste vode. Bwodpfoy Iwzzex Agtsl Priprava reagentov, pufrov in raztopin. Napajanje naprav, kot so avtoklavi, pralniki in sistemi za ultračisto vodo. Splošno kemično ali biološko laboratorijsko delo, ki zahteva zanesljivo vodo tipa 2.