Karstens Premium Retrofit Cilindrični Brusilni Stroj nakup rabljenega (31.974)

Stanje: rabljeno, Leto izdelave: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Centre height: 320 mm Rcodpfx Aljvq R Uzstsd The machine has been overhauled according to the Kellenberger measurement protocol and newly painted. The prone-to-failure Güttinger control system was replaced with the modern BEMA X control system. This means that, in the process, the machine also received completely new electrical equipment. The machine features a reinforced workpiece headstock for through-feed grinding of heavy workpieces. At present, the machine does not comply with the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV) 2015. Raising the required minimum protection level must be determined by a risk assessment in accordance with the BetrSichV.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 250 mm Grinding length: 400 mm Centre height: 125 mm Control: Fanuc 21i-T Machine serviced and partially overhauled. - New grinding spindle bearings - New X-axis spindle - Upper table surface reground - New table geometry - New geometry: workpiece support (WSS) to grinding spindles B-axis with 1° Hirth serration Longitudinal positioning HF internal grinding spindle Rcodpfsvx Dvusx Altsd Gap control (GAP) Paper band filter

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Rsdsv I Eq Sopfx Altecd Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal travel of table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – floating: 130 kg incl. clamping Internal spindle fitting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Available immediately, supplied with 12-month warranty as standard! Geometrically overhauled and newly painted with new electrics. In KELLENBERGER quality! - Digital readout on 2 axes. X-axis resolution 0.5 µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request At present, the machine tool does not meet the basic safety and health requirements as stated in the German Industrial Safety Regulation (BetrSichV) 2015. A risk assessment according to BetrSichV must be carried out to determine the necessary minimum protection.

Stanje: rabljeno, Leto izdelave: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit Fanuc 310is Completely mechanically overhauled. Includes grinding process and setup for one part. Original photo of the machine from EMO 2010. CNC control GE Fanuc 310is Hand panel for GE Fanuc CNC control With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Left grinding wheel assembly 500 x 80 mm Right grinding wheel assembly 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through workpiece spindle Dressing device on the upper table Swivelling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units Rodpfx Asvdk N Ejltecd KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on workpiece spindle headstock for internal and external grinding Provisions for measuring controls Movomatic ESZ 400 or Marposs P7 ME Provisions for external filter Coolant shut-off for table devices Full enclosure for emulsion Emulsion mist extraction system Maintenance unit for pneumatic auxiliary functions Provisions for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for Arobo steady rest

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter Rcjdpouxfucofx Altjd -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: rabljeno, Leto izdelave: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Machine weight: approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Rcsdpfxjt Ii Nbj Altjd Mechanically and visually as new Photo shows a recently completed machine with some optional features. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/face grinding - B-axis automatic, 1° Hirth serration - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount, 400 mm diameter - Right grinding wheel mount, 300 mm diameter - Internal grinding device with belt drive - Tailstock with micro adjustment - Fine adjustment on swivel table - Paper band filter SBP4, 240l

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swivel range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight – cantilevered: 130 kg including clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a world-leading company in the field of Kellenberger – overhaul / retrofit, we are not only able to deliver machines in as-new quality with warranty, but can also offer service for your machines. Machine geometrically overhauled and repainted with original electrics. Photo shows a recently delivered 600U. -Digital readout in 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New heavy-duty internal grinding attachment, diameter 80mm or 100mm, with height adjustment Rcedpet Ii Nuefx Altod - Increase of centre height to max. 225mm - Variable speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently fulfil the basic safety and protection requirements as specified in BetrSichV 2015. The required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Stanje: rabljeno, Grinding diameter: 350 mm Rodpfx Ajt Ii Rfsltscd Grinding length: 1500 mm Centre height: 175 mm Left grinding wheel: 600 mm Grinding spindle headstock fixed, not swivelling. Equipped with new FAGOR CNC control with BEMA cylindrical grinding interface. Featuring a new, service-friendly enclosure. Fully overhauled according to Kellenberger measurement protocol.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Rjdpfx Alsuxfupotecd Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Cross travel max.: 270 mm Workpiece weight max. (fly): 130 kg including clamping Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Picture of a previously delivered machine. - Operation via touch panel is extremely simple. - The symbols on the control panel are nearly identical to the original system, so no extensive retraining required. - Diagnostic function with display of PLC messages and digital I/Os. - Dressing function can be expanded or modified per customer request. - Oriented spindle stop for workpiece spindle available on request. - New maximum infeed amount: 40 mm (can be optionally increased). - Digital readout on 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding spindle headstock (no height adjustment with spindle possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Collet tube for chuck Further accessories available on request. The machine is equipped with an electronically controlled infeed system (X-axis) with stepper motor drive. Hydraulic table traverse and rapid feed. Versatile application in production for external and internal cylindrical grinding, or for combined external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control system The machine tool does not currently meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety targets must be determined by a risk assessment according to BetrSichV.

Stanje: rabljeno, Leto izdelave: 1990, Premer brušenja 360 mm Dolžina brušenja 1000 mm Višina med konicama 180 mm Teža obdelovanca med konicama maks. 250 kg Stroj z zelo malo delovnimi urami po obnovi pri strokovnjaku Karstens. Redpfoxbh Ebex Altocd Krmiljenje podajanja Jetter Digitalni prikazovalnik Naprava za notranje brušenje Konjiček z natančno nastavitvijo cilindričnosti Hidravlična pinola konjička itd. Hitro nastavljanje brusnega vretenjaka z zračnim ležiščem

Stanje: rabljeno, Leto izdelave: 1995, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Generalno obnovljeno leta 2013 Ojačano glavno vreteno obdelovanca B-os brezstopenjsko nastavljiva Kontra-vreteno Rcedexyadajpfx Altsd Brez vpenjalne glave in brez lunete na fotografiji Krmiljenje Kelco 90 Stroj je možno pri stranki v obratovanju ogledati do vključno januarja 2026.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, širina brusilnega kolesa: 150 mm, premer brusilnega koluta: 305 mm, leto zadnje generalne obnove: 2025, Grinding wheel diameter 305 x 150 mm, workpiece diameter 1–40 mm. Machine for plunge and through-feed grinding, PLC control, coolant system, hardened and ground guideways, grinding and regulating spindle hydraulically mounted via 3-point support, hydraulically adjustable dressers for grinding and regulating wheel, regulating wheel drive adjustable via DS motor, new German-specification electrics with Siemens components, Siemens S7 control. Rcedpfx Alewi H Uaotsd

Stanje: rabljeno, Leto izdelave: 1990, Premer brušenja 200 mm Dolžina brušenja 340 mm Višina konic 100 mm Krmiljenje CNC Priključna moč 25 kVA Rcsdpfxeywnt He Altjd Obratovalna napetost 110 / 220 / 3x165 / 3x380 VAC Krmilna napetost 24 VDC

Stanje: rabljeno, Leto izdelave: 2004, Premer brušenja 250 mm Dolžina brušenja 650 mm Višina konic 125 mm Stroj se prodaja s servisom in novo geometrijo Delovnih ur do sedaj 12.260 Rcsdpfxoywntyj Altjd Konjiček z fino nastavitvijo Brušilni vretenjak z možnostjo nagiba, 5° Hirt zobniški prenos Filter s papirnatim trakom Merilna naprava Marposs Naprava za notranje brušenje

Stanje: rabljeno, Leto izdelave: 2008, Tukaj je nekaj ključnih podatkov: - CNC univerzalni cilindrični brusilni stroj WUG 21 osnovni stroj podjetja CNC-Technik Weiss. (WUG 21 je Karstensovo ležišče stroja, na katerega je zgrajen CNC.) - Leto izdelave 2008 / obratovanje največ v eni izmeni - Medkončna razdalja 1000 mm - Vpenjalno vreteno in konjiček MK4 Rcodpfsxmurxsx Altsd - Premer diska do 500 mm - Položaj brusnega diska pod kotom 26,5° poševno - Pogon brusnega diska s programirljivim SUG - Brusilni vretenik ročno vrtljiv na zračnem ležišču - Brusni disk na desni strani - Vgrajena notranja brusilna enota zadaj, vključno z naprav za oblačenje - Krmilje Eckelmann - DIN programiranje - Ciklni programi - Ročno brušenje, da - Avtomatsko oblačenje - Marposs zaznavanje vibracij za zunanji brusni disk vključno s programsko opremo - Brusilno vreteno in vreteno za obdelovanec z jermenskim pogonom

Stanje: rabljeno, Razdalja med konicami: 2.500 mm Višina konice: 250 mm Premer brusnega koluta: 600 mm Skupni pomik brusne podpore: 320 mm Število obratov vretena obdelovanca: 50 - 450 obr/min Vpenjanje: MK5 Konica konjička: MK Cilindrični brusilni stroj | NAXOS-UNION - W-500 Cilindrični brusilni stroj je bil leta 2017 popolnoma obnovljen (RETROFIT) pri KPS-Schleiftechnik (glej potrdilo naročila). Stroj je dobro vzdrževan. Rcedjx Avtcepfx Altod Za dodatne tehnične informacije glejte ponudbo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 630 mm, premer brušenja: 320 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Rcsdpfx Aleyvf S Nstsd TEHNIČNI PODATKI Maks. dolžina brušenja: 630 mm Maks. premer brušenja: 320 mm PODROBNOSTI O STROJU Proizvajalec: TOS HOSTIVAR Model: BHU 32 Leto izdelave: 1987

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, External Cylindrical Grinding Machine Manufacturer: TOS Model: BUB 40-1000 Year of manufacture: 1993 Control system: Cetos K 51 Rodpewp D Auefx Altscd WORKING RANGE – CYLINDRICAL GRINDING Maximum swing diameter: 400 mm Maximum workpiece weight between centers: 500 kg Maximum workpiece weight (single-sided clamping): 100 kg WORKING RANGE – EXTERNAL GRINDING Maximum grinding diameter: 400 mm Minimum grinding diameter: 10 mm Grinding length: 1000 mm TABLE – CYLINDRICAL GRINDING Swivel range (B axis): from 8.5° Rotation range B axis: up to -4.5° Longitudinal travel: 1200 mm WORKPIECE SPINDLE STOCK Swivel range (B axis): from 0° Rotation range B axis: up to 90° Spindle bore: 40 mm Number of gear steps: 2 Drive power: 9.5 kW Tool holder: MK 5 TAILSTOCK Quill stroke: 40 mm Quill taper: MK 5 Max. clamping force: 4 kN GRINDING SPINDLE STOCK Swivel range (B axis): from -15° Rotation range B axis: up to 45° GRINDING WHEEL Design: wheel Diameter (max): 500 mm Bore: 203 mm Width: 80 mm ELECTRICAL DATA Connected load: 16 kVA Connection voltage: 400 V Mains frequency: 50 Hz DIMENSIONS / WEIGHT Space requirement – left/right: 4700 mm Space requirement – front/back: 2050 mm Overall height: 1900 mm Total weight approx. 5400 kg ADDITIONAL EQUIPMENT (GRINDING) Balancing device: Yes Machine in well-maintained condition Workpiece spindle stock swivels 90° Grinding spindle stock swivels -15°, +45° Table swivels +8°30' - 4°30' Accessories: - Hydrostatic spindle - Various corundum grinding wheels - 2 diamond grinding wheels - Balancing head MPM, renewed in 2021 - Filtration unit - Extraction system

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Offered is a conventional universal cylindrical grinding machine EMAG Weiss Eco 200. This ultra-compact machine is especially designed for users who do not require CNC control but still demand the highest processing quality. The machine is easy to operate and offers excellent accessibility, allowing for quick setup and changeover. TECHNICAL DATA Workpiece diameter: max. 200 mm Workpiece length: max. 400 mm Centre height: 100 mm Rodpfx Alotmqcwjtjcd Workpiece weight: 30 kg Workpiece headstock – Mount: MT4 Tailstock – Mount: MT3 Grinding wheel diameter: max. 350 mm Price, delivery time, and machine configuration upon request.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Offered is a CNC-controlled universal cylindrical grinding machine EMAG Weiss W 11 CNC. The machine is suitable for external, internal, face, and cylindrical grinding operations. The W 11 CNC cylindrical grinding machine is ideal for single-part, prototype, and series production. It is also used in training and maintenance departments. CONTROL SYSTEM Eckelmann TECHNICAL DATA Workpiece length: max. 1,500 mm Centre height: 200 mm | Option: 320 mm Workpiece weight: 250 kg Workhead: Morse taper 4 | Option: Morse taper 5 / Morse taper 6 Tailstock: Morse taper 4 TOOL CARRIER Single wheel machine, angular/straight, but also possible with 2 wheels with B-axis and internal grinding spindle. Rodpsr Ey Husfx Altecd Price, delivery time, and machine configuration upon request.

Stanje: dober (rabljeno), Leto izdelave: 1981, obratovalne ure: 16.769 h, Centre height 175 mm, centre distance 700 mm, swivelling angle of rotary table 10°, workpiece spindle head swivelling range 90°, speed range 30–675 rpm, Morse taper 5, grinding spindle head – grinding wheel diameter 400 mm, maximum width 50 mm, drive power 6.25 kW. Rcjdpfjtz T H Djx Alted

Stanje: dober (rabljeno), Hydraulic Cylindrical Grinding Machine Centre height: 100 mm Centre distance: 500 mm Grinding wheel diameter min./max.: 200 - 300 mm 3 grinding wheel speeds: 2,250 – 2,420 – 2,680 rpm Workpiece spindle head: 8 adjustable workpiece speeds: 30 – 750 rpm Spindle taper or internal taper of the workpiece spindle: MT 4 Tailstock: Internal taper of quill: MT 3 Quill stroke: 30 mm Table: Maximum table swivel: +/- 6° Table speed, adjustable: 0.1 – 6.0 m/min Motor power: 3 kW Rcjdpfxor E Azij Altsd Dimensions L x W x H: 1650 x 1350 x 1400 mm Weight: 1,900 kg Accessories / Special Features: • Manual or automatic operation • Automatic infeed • Grinding wheel flange with grinding wheel • Wet grinding equipment Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 130 kg, širina na sredini: 600 mm, premer brusilnega koluta: 450 mm, skupna širina: 2.110 mm, skupna dolžina: 3.120 mm, skupna višina: 1.435 mm, premer brušenja: 350 mm, hod vretena: 30 mm, širina brusilnega kolesa: 50 mm, hitrost vretena za brušenje: 2.000 obr/min, skupna masa: 3.100 kg, Vitesse de broche de rectification : 1500 ou 2000 tr/min (changement de courroie manuel) Course axe Z : 750 mm Course axe X : 265 mm Puissance de broche de rectification : 3,7 kW Comprend les accessoires standards suivants : - Réservoir de liquide de refroidissement 120 litres avec pompe de 0,4 kW (200 l/min) et séparateur magnétique - Contre-pointe hydraulique - Tôle pare-éclaboussures amovible - Centrale hydraulique - Meule standard Ø 450 x Ø127 x 50 mm - 1 flasque de meule - 1 extracteur de flasque de meule - Support de dressage avec diamant sur la contre-pointe - 2 pointes de centrage - Comparateur pour l’alignement de la table à 0° - Éclairage machine - 3 crochets amovibles pour levage par grue Rcodpfxsc Tnq Io Alted - Vis de mise à niveau avec plaques de pose - Documentation machine Comprend également les accessoires spécifiques suivants : - Dispositif de rectification intérieure - Variateur (Mitsubishi) pour la régulation de la vitesse de la broche de travail - Variateur pour la régulation de la vitesse de la broche de rectification avec moteur 5,5 kW, incl. affichage - Affichage digital 2 axes Heidenhain ND 780

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 119/020.0895, Izvor proizvodnje CH Napetost 400V Dimenzije 2700x2350x2100 mm Neto teža 4500 kg TEHNIČNI PODATKI Krmiljenje Fanuc 16i-T Višina konice 175 mm Razdalja med konicami 1000 mm LINEARNE OSI Dolžina brušenja 500 mm Rcjdpfx Alolbgfcoted Pomiki X: 267 mm Z: 650 mm BRUSILNI VRETENJAK Brezstopenjsko vrtljiv +/- 8,5° Dimenzije brusnega kamna 500x80x203 mm Moč 7,5 kW Hitrost 44 m/sek. VRETENJAK ZA OBDELOVANEC Vrsta konusa MK5 C-os +/- 5° Moč 1 kW Hitrost vrtenja 30-1000 min-1 PROTIDEL Vrsta konusa MK3 Hod pinole 35 mm Premer pinole Ø 50 mm Maks. masa obdelovanca 130 kg NAPAJANJE Napetost 400V 50 Hz Tehnični podatki so informativni in podvrženi spremembam ali napakam.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, (Please state your offer price) Sales only within Europe, including Turkey Rodpoxrtarefx Altscd Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.