Ima Stroj Za Oblaganje Robov nakup rabljenega (91.908)

Leto izdelave: 1999, stanje: dober (rabljeno), Edgebanding Machine IMA Compact MFA / F / 5212 Year of manufacture: 1999 Serial No.: 06601 Maximum edge thickness: 12 mm Minimum workpiece thickness: 10 mm Maximum thickness of roll material: 3 mm Feed speed: 12 m/min Adjustment of jointing fence: manual Heating time: 10 min Jointing unit: Yes, with 2 milling units Automatic roll magazine: Yes Shear cut up to: 0.2 - 3.0 mm Solid edge magazine: Yes Panel preheating by radiant heater automatic gluing with granulate glue pot Cut-off saw angle adjustment via program Multifunctional unit Round-off unit/corner copying with 2 motors Profile scraper Flat scraper Hodpfxoia Naqe Afasp Buffing unit Aggregate display via mechanical number display Control via operator panel Operation via selector switch/buttons Protective hood Weight approx. 2500 kg Dimensions (L x W x H): 6500 x 1000 x 1600 mm CE marked Technical data subject to change

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA Hodpsr A Eq Rsfx Afaep The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: zelo dobro (rabljeno), Edge cutting device Hsdpfowiwnqjx Afaop Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l Hsdpfx Afjlc Ewieajp CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Leto izdelave: 2021, stanje: skoraj kot novo (rabljeno),

Stanje: rabljeno, Leto izdelave: 1996, Debelina roba: 0,4 - 12 mm Rob valja: 3 x 45 mm oz. 0,8 - 60 mm Minimalna širina obdelovanca: 65 mm Minimalna dolžina obdelovanca: 160 mm Debelina obdelovanca: 10 - 55 mm Podajanje: 13 m/min Predrezkanje (spajanje) Lepilna kad Quickmelt Lepilni del Obarjanje Poravnalno rezkanje Poševno rezkanje Polmerno rezkanje Kopiranje robov Ravno strgalo Polirni agregat Dimenzije stroja: 7450 x 1220 x 2400 mm Teža: 3000 kg Lokacija skladišča: Nattheim Hodpevvkd Tofx Afajp

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Hedpfsvvkfdex Afajp Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Spray unit 1856 for entry and exit section: For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.

Stanje: rabljeno, Leto izdelave: 2002, Dolžina stroja: 6240 mm Teža: 2400 kg Priključna moč: 14 kW Premer odsesovanja: 120 / 140 mm Lokacija skladišča: Nattheim Hedpfx Afovvkfwjaep

Stanje: rabljeno, Leto izdelave: 2011, pnevmatska nastavitev rezkarja (ravno/radij) Kombinirana rezkarska postaja R=2 Rezkar zaokroževanja robov R= 2 do 40 mm Spojni rezkar do 40 mm Ravno strgalo Profilno strgalo R = 2 Kratki obdelovanci SPS krmiljenje z zaslonom na dotik Pro Face Gnezdenje Hlajenje/antistatično pršenje - airtronic Zaščitno pršenje roba Riepe z vključenim zamenljivim rezervoarjem Debelina obdelovanca 8 - 60 mm Mehanska pritrditev roba Odvzemna odprtina: 140 mm Dimenzije: Dolžina z izpostavo: 4984 mm Globina z valjčno mizo: 1425 mm Največja višina: 1618 mm Višina delovne mize: 888 mm Teža: 1400 kg Lokacija skladišča: Nattheim Hsdpjxyiiljfx Afasp

Stanje: rabljeno, Leto izdelave: 1999, Višina roba: 10 - 60 mm Debelina roba: 0,4 - 3 mm Minimalni radij krivulje: 20 mm Hitrost podajanja: 2 - 18 / 4 - 14 m/min. Motor: 5,2 kW Zračni tlak: 6 bar Dimenzije: 900 x 1300 x 1200 mm Teža: pribl. 350 kg Hjdoymcrbjpfx Afaop Lokacija skladišča: Nattheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, PROFILATRICE COMAL PRD 12 Avtomatski robilnik za obrezovanje trakov. Uporablja se za pripravo robov trakov pred nadaljnjim valjanjem. Hedexdr Swspfx Afajp Stroj je opremljen z nizom valjev, ki omogočajo kontinuirano hladno profiliranje trakov in pločevine do željenega profila ali cevi. Stroj je bil zelo malo uporabljen, popolnoma delujoč in v dobrem splošnem stanju. Na voljo sta originalni priročnik in dokumentacija.

Stanje: rabljeno, Leto izdelave: 2022, vklj. 2. lepilni bazen Debelina lepljenja za valjasto robno: 0,4 - 3 mm Debelina lepljenja za trakasto robno: 5 mm Min - maks. višina obdelovanca: 8 - 50 mm Podajalna hitrost: 9 m/min. Predrezalna enota Lepilna enota Odkrajševalna enota Zaoblitvena enota Poravnalna rezkalna enota Radijska strgala Ploska strgala Polirna enota Razpršilna naprava Lokacija skladišča: stranka Hedpfx Aow Aig Ssfasp

Stanje: zelo dobro (rabljeno), SCM Contura in excellent condition. Hodpfjt E T I Njx Afasp

Stanje: zelo dobro (rabljeno), SCM Praktika in excellent condition Hsdpfjt Hkq Rjx Afaop

Stanje: novo, - Continuously angle-adjustable sanding unit (0 – 90°) for vertical and horizontal sanding - Oscillating sanding belt for improved sanding results and increased belt service life - Quick and easy belt change thanks to rapid tensioning system - Graphite-coated standard sanding shoe for increased belt longevity - Handwheel-adjustable work table made of cast iron with T-slot - Includes lateral sanding drum device for sanding curves and radii - Two extraction ports, Ø 100 mm - 1x abrasive belt 2750 x 150 mm, grit 80 - 1x sanding drum Ø38 mm, grit 80 - 1x sanding drum Ø50 mm, grit 80 - 1x sanding drum Ø75 mm, grit 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction port diameter: 100 mm Work table: - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Mains voltage: 400 V - Mains frequency: 50 Hz Sanding unit: - Belt length: 2750 mm - Belt width: 150 mm - Belt running speed: 16 m/s - Oscillation stroke: 15 mm - Sanding area length: 1010 mm - Sanding area width: 190 mm - Max. sanding height: 170 mm - Sanding unit swivel: 0 – 90° Workpiece: - Max. workpiece width: 1010 mm - Max. workpiece height: 150 mm Hjdpfovxkv Ujx Afajp - new display machine -

Stanje: novo, Edge sanding machine HOLZKRAFT KSO 200 F - Demonstration machine - Relief rollers on the fence guides, with tiltable sanding unit, and oscillating sanding belt, veneer sanding device, oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubber-coated sanding roller Hjdpfx Aou R S Erefasp ----- Technical Data ----- Sanding belt dimensions: 3,000 x 200 mm, Worktable dimensions: 960 x 350 mm, Worktable height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Extraction port diameter: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new demonstration machine -

Stanje: zelo dobro (rabljeno), Edgebander FORMAT 4 Tempora 60.06 glueBox - used Touchscreen Swiveling control panel Program memory Automatic pressure bridge adjustment Feed via transport chain Extendable workpiece support Diamond jointers for both climb and counter-rotation Glue pot located at the bottom Quick-change glue pot system Suitable for PUR adhesives GLUEBOX system Pressure unit with powered roller Cut-off saw with 2 high-frequency motors Cut-off saw, pneumatically tiltable Flush / radius milling unit Motorized positioning control for milling unit Hsdpfx Aou R S Nwsfaep x-motion PLUS Corner rounding unit with diamond-coated cutters Radius scraper blade Radius scraper blade with motorized positioning Flat scraper blade Workpiece-activated flat scraper blade Infeed lock Spraying unit for release agent Spraying unit for lubricant Spraying unit for cleaning agent Year of manufacture: 2022 ----- Technical Specifications ----- Edging thickness, coil material: 0.4 - 3 mm Edging thickness, strip material: 3 - 6 mm Workpiece thickness: 8 - 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen diagonal: 15 inches Jointers dimensions: D 80 x 64 mm Jointers power: 1.1 kW Cut-off saw power: 0.35 kW Milling station power: 0.75 kW Extraction port diameter: 80 + 160 mm Compressed air connection: 7 - 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality Info: - All settings checked - Adjusted to manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Immediately ready for operation

Stanje: rabljeno, Leto izdelave: 2003, Rabljeni stroj Leto izdelave: 2003 Oprema in tehnični podatki: - Krmiljenje MAGELIS - Za vroče lepilo na osnovi EVA - Lepljenje: 2x1,5 kW, u=12000, 200 Hz - Prirezovanje: 2x0,2 kW, avtomatski zasuk 0°/3°, 2 HM žagini listi 140 mm - Poravnalno rezkanje: 2,07 kW, z WPL glavami HF 70, premer 70 mm - Rezkanje radija: R2 - Radijska strgala - Površinska strgala - Zgornji lepilni bazen - Mere obdelovanca: - Minimalna širina: 70 mm - Debelina: 8-42 mm - Minimalna dolžina: 150 mm - Debelina roba: 0,2-6 mm - Podajalna hitrost: 12 m/min - Priključek za odsesavanje: 160 mm Hedpfx Afjxymfwjaep Dimenzije: 4.500 x 1.250 x 1.300 mm Teža: 1.650 kg Razpoložljivost: takoj Skladiščna lokacija: Baden-Württemberg

Stanje: rabljeno, Leto izdelave: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial feed chain 1"1/4 Jointing milling unit FI-502 Gluing unit VC-710 Cut-off unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction/form milling units CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC with 2 positions Hodpfxov R Nk Us Afasp Flat scraper RCC-701 Workpiece thickness: 10–65 mm Max. workpiece height with form milling unit (depending on profile): 35–65 mm Edge thickness (coil): 0.4–3 mm Edge thickness (strip material): 0.4–22 mm (depending on unit) Min. workpiece length: 140 mm Min. workpiece width (at length 140 mm): 85 mm Min. workpiece width (at length 250 mm): 50 mm Feed speeds: 10–14–18–20 m/min Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, jointing: 120 mm Glue tank capacity: approx. 3 kg Heating time at half fill level: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return conveyor shown in the images Availability: short-term Location: Flörsheim

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter – max. 400 mm Number of teeth – max. 150 Module – max. 5 Total power requirement: 16 kW Machine weight approx. 10 t PRÄWEMA CNC Gear Edge Milling Machine using Continuous Hobbing Process For chamfering external and internal gears on sliding sleeves, synchronizer rings, clutch hubs, starter pinions, spur gears, etc. Type SynchroForm W 2 - 1 Year of manufacture: 1991 Machine no. 05610 Workpiece diameter min./max.: 30 – 400 mm Number of teeth: 6 – 150 Maximum module: 5 Tool holder / shank Ø: SK 30 / 20 mm Tool speed / spindle power max. continuous: 4,000 rpm or 1.8 kW Feed rates transverse & longitudinal: 0.001–12 m/min Max. workpiece rotation speed (1.5 kW) - C axis: 2,000 rpm Total drive: approx. 16 kW – 380 V – 50 Hz Weight: approx. 10,000 kg Accessories / Special Equipment: • BWO (HECKLER & KOCH) CNC control Type 785 H for up to 7 axes with screen input and all necessary monitoring and fault diagnosis systems for fully automatic operation • Two milling spindle units (left and right), adjustable in all necessary angular positions, CNC-controlled: Z and W axes = tool cross slide / X and U axes = tool longitudinal slide, L and O axis = milling spindle, C axis = workpiece spindle rotation. Manually controlled: Tool slide rotary table (B and E axis), tool slide vertical adjustment (V and Y axis), tool head tilt (A and D axis), each with ROD for digital position indication in the control. • Hydraulically actuated workpiece clamping device in conjunction with loading automation via workpiece feeder/conveyor belt and swing loader, as well as air system monitoring for the workpiece. • Coolant unit with chip conveyor, soundproof enclosure, central lubrication, built-in hydraulic system, pneumatically operated safety doors, deburring device, etc. The machine operates on the hobbing principle with electronically synchronized tool and workpiece axes for machining both symmetrical and asymmetrical straight chamfer shapes. Characterized by high productivity and precision. Condition: good to very good – soon ready for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further machines for processing transmission components are always in stock. Please inquire about your requirements with us. Hedjt Hwylspfx Afajp

Leto izdelave: 1975, stanje: rabljeno, Wheel Diameter – max. 280 mm Number of Teeth – max. 100 Module – max. 6 Module – min. 1 Total Power Requirement: 6 kW Machine Weight: approx. 2,500 kg Space Requirement: approx. __ m H U R T H Automatic Gear Edge Milling Machine for universal use in deburring and chamfering gears Model: ZK 7 - Year of Manufacture: 1975 Serial No.: 26 000 _____ Hjdpfx Ast Hw Dkjfajp Max. Workpiece Diameter: approx. 280 mm Workpiece Length: approx. 200 mm Module Range for Deburring: 1-6 module for Simplified Shifting: 1-4 module Workpiece Tooth Count: 6 - 100 Workpiece Spindle Bore: 102 mm Horizontal Adjustment of Workpiece Head: approx. 340 mm Vertical Adjustment of Milling Slide: 180 mm Swiveling Range of Milling Slide: 105° Traverse Adjustment of Milling Slide: approx. 300 mm Cutter Speeds: 250-2,800 rpm Cutter Stroke Rates: 30–210/min Adjustable Cutter Stroke: 6–12 mm Milling Spindle Taper: 40 SK Total Drive: approx. 6 kW – 380 V – 50 Hz * Weight: approx. 2,500 kg Accessories / Special Equipment: • Electric workpiece clamping device with collet chuck setup, facility for expanding mandrels, and standard workpiece holder, extensive clamping devices included. Foot switch for clamp release. • Mechanical indexing device for tooth numbers, with approx. 20 different indexing plates • Adjustable tooth gap-centering device mounted on the workpiece head • Mechanical collet adapter installed on the tool head for various cutter diameters and types (profile/face/bell cutters, etc.), approx. 50 various used and new cutters included. • Hydraulic working stroke of tool spindle towards the workpiece, with integrated hydraulic unit. • Workpiece counter Condition: Good – demonstration-ready, very interesting due to extensive accessories. Delivery: ex stock – as inspected * Payment: strictly net – upon receipt of invoice We look forward to your order. Approximately 100 different gear cutting machines are still available in stock for selection. Please inquire with us.

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter - max. 0 mm Number of teeth - max. 0 Module - max. Module - min. Total power requirement kW Machine weight approx. t Space requirement approx. m CNC-controlled synchronizer ring milling machine Hsdjt Hwv Hjpfx Afaep ideal for synchronizer rings, BWO control 785 H

Stanje: rabljeno, Leto izdelave: 2008, Priključna moč: 15 kW Hitrost podajanja: 14 (11) m/min Debelina obdelovanca: 8 - 60 mm Debelina robu: 0,4 - 8 mm Razmak valjev: maks. 3,0 x 45 / 0,8 x 65 mm Premer odsesavanja: 120 / 160 / 100 mm Delovna višina: 950 mm Dimenzije: 6260 x 1560 x 2300 mm Teža: ca. 3000 kg Lokacija skladišča: pri dobavitelju Hjdpfjy Ruzqsx Afasp

Stanje: zelo dobro (rabljeno), Profesionalni italijanski lakirni stroj BIBO TC84 je namenjen dvosmernemu lakiranju in obdelavi robov usnja. Stroj se uporablja pri proizvodnji pasov, trakov, torbic, denarnic in drugih usnjenih izdelkov, ki zahtevajo estetsko obdelavo robov. Naprava omogoča enakomeren nanos barve na robove materiala, bistveno pospeši proizvodni proces in zagotavlja visoko ponovljivost izdelave. Tehnični podatki: Proizvajalec: BIBO Model: TC84 Država izdelave: Italija Napajanje: 380 V, 50 Hz Dvosmerno lakiranje robov Nastavljivi delovni parametri Nastavljivo vodilo materiala Stabilna jeklena konstrukcija Omarica / podnožje v kompletu Uporaba: usnjeni pasovi trakovi Hjdpfjzgvfyjx Afajp torbe denarnice usnjena galanterija izdelki za galanterijo Stanje: Rabljeni stroj. Vizualno stanje je razvidno s fotografij.

Leto izdelave: 1994, stanje: pripravljen za uporabo (rabljen), Na voljo je modularni profilni in robni tračni brusilni avtomat za brušenje masivnih in furnirnih robov v pretočnem načinu delovanja. Podajalna hitrost: 5-25 m/min, število agregatov: 5, območje debeline obdelovanca: 12 mm-60 mm, transportna veriga: 80 mm, dolžina brusilnega traku: 2000 mm, širina brusilnega traku: 20 mm/35 mm, hitrost traku: pribl. 7 m/s, maks. delovni radij: 12 mm. Dimenzije stroja: pribl. 2670 mm/1200 mm/1800 mm. Teža: pribl. 1200 kg. Dokumentacija na voljo. Ogled možen po dogovoru. Hjdpfx Aezh Nihjfaop