Stroj za lepljenje robov s spajanjem

SCM ME 40 TR

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Fsdpfx Ajc S Di Rjfloft Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: rabljeno, Holz Her UNO 1303 + PU Debelina roba 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev enot Popolnoma avtomatski podajalnik robnega traku za kolutno in trakasto blago Postaja za nanašanje lepila: kartuše + PU lepljenje Višina obdelovanca 6-55 mm Pnevmatska pritiskalna enota Odtirna enota za kolutno in trakasto blago do 3 mm (6 mm) debeline roba S preklopom od 0-10° naklona žage Rezkalna enota, ravnalno rezkanje, rezkanje radijev, posnemanje robov do 15° Strgala za posneme in radije Površinsko strgalo – za končno obdelavo Stroj je PREGLEDAN v ODLIČNEM STANJU iz izredno dobro vzdrževane obrtne delavnice Fedpfx Aoxlz Nzofleft Na voljo iz zaloge Lieboch

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Kanterica sa najviše dodatne opreme u svojoj tehnološkoj razini, sa izvrsnim omjerom kvalitete i cijene. Fsdpfx Asqw Ux Tsfljft Dimenzije radnog stola 3465 x 710 mm Min. ÷ maks. debljina rubne trake (u roli) 0,4 ÷ 3 mm Maks. debljina rubne trake (u trakama) 5 mm Min. ÷ maks. visina panela 8 ÷ 50 mm Min. duljina/širina panela 190/110 mm Brzina pomicanja 9 m/min Ova kanterica povećava produktivnost s brzinom pomicanja panela od 9 m/min i jamči visok standard kvalitete u obradi zahvaljujući mogućnosti rada s poliuretanskim ljepilom, izvođenja utora, a uz sve to je izuzetno jednostavna za korištenje. KOMPOZICIJA STROJA: ME 40TR AUTOMATSKI STROJ ZA LIJEPLJENJE RUBNIH TRAKA 109999 Sigurnosna izvedba R00341 me 40tr verzija CE 930731 Volt 400 EU 931201 Frekvencija 50 Hz 580653 JEDINICA ZA STRUGANJE RUBOVA 580444 JEDINICA ZA ČETKANJE 580654 JEDINICA ZA STRUGANJE LJEPILA 580656 Rezervna posuda za ljepilo za poliuretansko ljepilo s brzim sustavom za izmjenu kadice 580509 Uređaj za grijanje ruba ploče 580510 Jedinica protiv lijepljenja 580548 Uređaj za raspršivanje (magla) sredstva za završnu obradu rubova 580658 Komplet uređaja za kopiranje "Nesting" za jedinicu za obrezivanje 580659 Komplet uređaja za kopiranje "Nesting" za jedinicu za struganje rubova 580666 Unutarnje osvjetljenje stroja

Stanje: rabljeno, Leto izdelave: 2003, Used machine Year of manufacture: 2003 Equipment and Technical Data: - Control unit with LCD display - Swiveling control panel - Program memory - Manual pressure beam adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond joint cutters, both climb and counter-rotation Edge magazine 1903: - Support disc 820 mm, max. loading capacity 40 mm - Automatic feeding of roll and strip material Fedpfx Afowka Nyeljft Glue application system 1906: - Cartridge system with sensing nozzle - Automatic reloading - PUR adhesives can be used Pressure unit 1816: - With driven roller - Pneumatic control of pressing system End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Application-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness roll material: 3 mm Edge thickness strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance to workpiece support: 470 mm Support disc Ø for edge material: 800 mm End trimming knives for rolls up to: 3 mm Heating time: 3.5 min Joint cutter power: 2 x 2 kW End trim saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction connection jointing unit: 120 mm Extraction connection milling unit: 70 mm Extraction connection scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Stanje: rabljeno, ALREADY DISMANTLED ‼️ AVAILABLE FOR IMMEDIATE DELIVERY ‼️ 🔥 Multiple Fröling Turbomatic (TMC) woodchip boilers for sale – Available outputs: 35 / 48 / 55 / 110 kW! 🔥 High-quality, automated Fröling TMC series biomass boilers for sale in various output levels. Ideal choice from family homes up to small industrial facilities where reliable, economical heating is essential. Fjdewakktepfx Afloft — Available models: • Fröling TMC 35 kW – for smaller systems • Fröling TMC 48 kW – for medium heat demands • Fröling TMC 55 kW – for larger workshops, farms • Fröling TMC 110 kW – for industrial/agricultural applications — Features: 🌲 Fuel: wood chips, pellets, shavings 🔁 Fully automatic operation: feeding, cleaning, ash removal 🧠 Advanced combustion control, intelligent management ♻️ High efficiency, low emissions 🇦🇹 Fröling – premium Austrian biomass technology 💥💰 Prices vary by model – contact us by phone or email for details! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — 💼 Top Heating Systems – ProfiKazán Wide selection of used Fröling boilers with expert support.

Stanje: rabljeno, Working width: 1350 mm Number of sanding units: 2 pcs. Maximum workpiece thickness: 160 mm Sanding belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Fedpfx Ajrmucxefljft Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT: ROLLER 2ND BELT: COMBINATION UNIT (ROLLER/PAD) SUITABLE FOR SOLID WOOD, VENEER, AND INTERMEDIATE COATING SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 x 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Continuously adjustable feed conveyor with variable speed: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION: ECO GEAR PATENT SYSTEM - 1 PC. DRUM BRAKE for belt stop - Swiveling ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP STRIP at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER CONVEYORS, each with 2 rollers at infeed and outfeed - AUTOMATIC CENTRING OF FEED CONVEYOR - 1 EXTRACTION CONNECTION, 160 mm diameter - AUTOMATIC TABLE POSITIONING IMPORTANT: New patented belt oscillation system 1. No valves 2. No photo sensors 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt tracking issues! - Unitek steel calibrating roller (same for all models) - Unitek flexible pressure shoe before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set, 6 positions (per pc., same for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width: 1350 mm) - Unitek belt motor upgrade to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor: 14.7 kW (for Excel 2-belt only) - Unitek automatic table lowering in case of emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed or outfeed conveyor with 4 rollers (same for all models) - Price per roller conveyor - Unitek electronic control of machine functions with 12'' touchscreen (same for all models) Automatic workpiece sensing with feed motor control ----- Machine price for the above configuration on request! ----- Optional items at extra cost: Surcharge for 3-belt machine (roller-roller-pad, Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and user training: EUR 1,300.00 ----- All prices are net plus 19% statutory VAT. ----- (Technical data according to manufacturer's information – no liability assumed!)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Spindle tiltable: No Height adjustment: Handwheel Tilting adjustment: - Milling jaw adjustment: manual Height display: mechanical counter Tilt angle display: - Milling fence display: mechanical counter Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Extraction connection: 2 x 120mm Machine length: 2599mm Fodpfx Ajgzlpkeflsft Machine depth: 900mm Weight: 655kg

Stanje: rabljeno, Leto izdelave: 2016, TECHNICAL DATA AXES Max. Workpiece Dimensions X-Y-Z mm: 3050 x 800 x 50 Min. Workpiece Dimensions X-Y-Z mm: 300 x 90 x 10 Ffedpsvvi I Rjfx Aflot Working Area Drilling/Grooving mm: 0 x 800 / 0 x 800 X-Axis Stroke mm: 750 Max. Traverse Speed X-Y Axes m/min: 25 DRILLING UNIT Vertical Spindles: - Number: 7 (4X-4Y, one shared) Horizontal Spindles (along Y-axis): - Number: 2 (1+1) Horizontal Spindle (along X-axis): - Number: 1 Fixed Grooving Saw (Direction): X Saw Blade Diameter mm: 100 Max. Saw Blade Thickness mm: 5 Motor Power kW (HP): 1.5 (2) Spindle Speed rpm: 3350 Saw Blade Speed rpm: 4300 INSTALLATION Power Supply V (Hz): 380 / 400 (50/60) Installed Power kVA: 4.5 Compressed Air Requirement bar: 6 Compressed Air Consumption Nl/cycle: 90 Extraction Requirement m³/h: 1200 Extraction Air Speed m/sec: 20 Extraction Port Diameter mm: 80+80 F10L Drilling Unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles: 32 mm - 2 horizontal drilling heads: 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill holder D10 mm) - Speed: 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed: 4300 rpm - Motor power: 1.5 kW - Vertical pneumatic stroke per spindle: 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece Positioning and Drive of the Working Unit A CNC-controlled vacuum suction cup clamps and positions the workpiece sequentially under the working unit during machining. Movement along the X and Y axes is via THK rails with transmission on reinforced toothed belts. Movement in the Z axis is pneumatic on ball bushing guides, with stops adjustable via the end position. Positioning of the working units is via DC motor technology and drives. CNC CONTROL The control system is specifically designed for use in drilling and milling machines. - CN - 7" color display with touchscreen - Alphanumeric keypad - Self-diagnosis and any faults or errors displayed in the operator's language Programming - Programmed via CN - Automatic optimization of drilling operations - Option for plate zero-point shift - Option to save and import drilling programs via USB dongle - Option to import drilling programs from external CAD-CAM software Configuration - User interface in the same language as the operating manual - Graphic display of aggregate configuration Vacuum Suction Cup "B-Power" vacuum suction cup with dual vacuum connection, recommended for highly porous panels (e.g., MDF light). Machine Operating Interface Software: Xilog Maestro USB Hardware and Software Requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min.; multicore processor recommended - Memory: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The package includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphical programming - Supported programming with graphical and syntax aids for drilling operations - Ability to create and save machining macros Integrated Additional Functions - Self-diagnosis and error reporting in the operator's language - User interface in

Leto izdelave: 2020, Stanje: generalkompletno obnovljen (rabljeno), Dear customers! Our experience has shown that communication by email often unnecessarily prolongs the process. We would like to assist you quickly, and for this, a three-minute phone call is more effective than exchanging emails for three days. Fodpfx Aofn Nddjfloft TSWc 30.20 Dry Spray Booth Dimensions: 3000 x 2000 mm (W x H) + Fan mounted at the top Air capacity: 10,800 m³/h Motor: 2.20 kW ex-protected Exhaust duct: 500 mm diameter Depth: 900 mm Double filtration: Paper filter + Paintstop filter mat with clamping rail (+180 EUR net) Options/additional price for: Paintstop filter mat with clamping rail: 180 EUR net Side deflector plates with hinge: 590 EUR net Images may differ. We are also happy to offer you complete spray booths with supply air systems, heat exchangers, supply air ceilings, ductwork, etc. Just contact us.

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: The machine was operated in Germany and regularly maintained (last maintenance by Homag in 11/2024) Equipment and technical data: Workpiece thickness min.: 12 mm Workpiece thickness max.: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) Edge thickness min.: 0.3 mm (coil material) / 0.4 mm (strip material) Edge thickness max.: 3 mm (coil material) / 20 mm (strip material) Feed speed: steplessly adjustable 18–25 m/min (frequency controlled) Type of glue: EVA hot-melt adhesive Glue application (tank / cartridge / nozzle): melting unit with granulate hopper Glue volume / cartridge size: granulate hopper, melting capacity 18–35 kg/h, level-regulated Heating-up time: approx. 8–10 min Edge magazine (slots): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, manually switchable) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: trimming unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) Flush trimming: via pre-milling unit, pneumatically adjustable Radius trimming: profile trimming unit FK13, automatic 8-position tool changer (R = 2 mm) Bevel / profile trimming: yes, via FK13 pneumatically adjustable Scraper: integrated in multi-finish unit MN21 Polishing: buffing unit in the finish unit FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Separating agent spraying device: top / bottom, type 2929 (F.01) Extraction ports: several Ø 100 mm (individual extraction per aggregate) Control: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / Standards: CE-compliant according to EU directive 98/37/EC Dimensions / space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor shown in the pictures is not included in the scope of delivery! Availability: short-term Location: Lithuania Ffjdpfx Aowx Aaqeflet