Igm Oblikovalec Debeline nakup rabljenega (1.077)

Stanje: zelo dobro (rabljeno), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x CS Sigma profile, used Material finish: Sendzimir galvanized Profile length: approx. 1,650 mm CS Sigma: approx. 200 x 65 x 18 mm Material thickness: approx. 1.50 mm Weight per unit: approx. 7.5 kg Note: The angles shown in the pictures are not included in the offer. General information about the item: This item is only available for collection. Should transport or shipping be required, this will incur additional costs, which can be individually queried with us depending on the delivery location and scope. Ijdjhwduxjpfx Abxjic Overview of our services: (Prices upon request) Assembly and installation Please observe our general assembly conditions. Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234 visual inspection for all racking systems. Delivery with our own fleet (unloading not included)

Stanje: dober (rabljeno), Technical data for the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Scope of delivery includes: 01x CS Sigma profile, used Material color: sendzimir galvanized Ijdpeidchgefx Abxeic Total length: approx. 5,600 mm CS Sigma profile dimensions: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Stanje: novo, Included in delivery: 01x Platform beam, new Manufacturer: SSI Schäfer Design: Corner connection / 90° Suitable for CS Sigma profiles With a profile height of 300 mm Type of fastening: Internal bolting Material finish: Sendzimir galvanized Iodpfsmv Dyzox Abxeic Technical data for the platform beam: Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Hole spacing (outer): approx. 250 mm Hole spacing (inner): approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm

Stanje: skoraj kot novo (rabljeno), Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank Scope of delivery includes: 01x CS Sigma profile, used Material colour: sendzimir galvanized Profile length: approx. 1,400 mm CS-Sigma: approx. 200 x 65 x 18 mm Material thickness: approx. 1.50 mm Weight / piece: approx. 6.500 kg Note: The angles shown in the pictures are not included in the offer. General information about the item: Ijdpjhwdu Hsfx Abxoic This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be requested individually depending on the delivery location and scope. Overview of our services: (Prices on request) Assembly and installation Our general assembly conditions apply Racking inspection Racking inspections in accordance with DIN EN 15635, carried out according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Stanje: dober (rabljeno), Technical data for the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Scope of delivery includes: 01x CS Sigma Profile, used Material color: sendzimir galvanized Total length: approx. 4,450 mm CS Sigma Profile dimensions: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm Isdpeidcg Ajfx Abxjic

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, skupna masa: 100.000 kg, teža obdelovanca (maks.): 18 kg, Ковашки чук HUTA ZIGMUNT модел MPM 3000 Енергия на удара: 10 000 кгм Тегло на плъзгача: 3 570 кг Максимален ход на плъзгача: 1 000 мм Брой удари в минута: 90 Общо тегло: 100 тона Тегло на наковалнята: 70 тона Iijdpolnllbsfx Abxoc

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 850 mm, pomik osi Y: 480 mm, pomik po osi Z: 580 mm, skupna višina: 2.990 mm, skupna dolžina: 4.226 mm, skupna širina: 2.345 mm, širina mize: 570 mm, dolžina mize: 1.000 mm, skupna masa: 6.000 kg, Oprema: dokumentacija / priročnik, transportni trak za ostružke, - CE marking available: Yes - CE certificate available: No - Control: CNC - Control system brand: Heidenhain Iiodpfx Asy D Ng Isbxec - Control system type: 426-M - Number of axes [pcs.]: 3 - X-axis travel [mm]: 850 - Y-axis travel [mm]: 480 - Z-axis travel [mm]: 580 - Table length [mm]: 1000 - Table width [mm]: 570 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 12,000 - Transport dimensions: 4226 x 2345 x 2990mm (L x W x H) - Transport weight [kg]: 6000kg - Cooling system: external cooling + external air blast + through-spindle coolant (IKZ) - Tool holder: SK40 - Magazine positions: 21 VAT: The quoted price is subject to VAT. You are welcome to arrange an inspection. The machines are powered on. Sale is exclusively to commercial customers, with all warranties excluded (sold as seen). Dismantling, collection, and transport are the responsibility of the buyer. A 10-ton overhead crane is available. Stated company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Technical data may differ and errors in the item description are reserved.

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: omejena funkcionalnost, potovalna razdalja osi X: 1.250 mm, pomik osi Y: 600 mm, pomik po osi Z: 685 mm, skupna višina: 3.030 mm, skupna dolžina: 4.280 mm, skupna širina: 2.860 mm, širina mize: 680 mm, dolžina mize: 1.400 mm, skupna masa: 8.000 kg, Oprema: dokumentacija / priročnik, transportni trak za ostružke, - CE marking available: Yes - CE certificate available: No - Control: CNC - Control system brand: Heidenhain - Control system type: 426-M - Number of axes [pcs]: 3 - X-axis travel [mm]: 1250 - Y-axis travel [mm]: 600 - Z-axis travel [mm]: 685 - Table length [mm]: 1400 - Table width [mm]: 680 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 12000 - Transport dimensions: 2860mm x 4280mm x 3030mm (w x l x h) - Transport weight [kg]: 8000kg - Cooling system: external coolant + external air blast + ICS (internal coolant supply) - Tool holder: SK40 Iisdpfx Asy D Ndaobxjc - Magazine positions: 21 Special feature: unresolved fault in the tool magazine VAT: The quoted price is exclusive of VAT You are welcome to inspect the machine on site; machines are under power. Sale is to commercial customers only, excluding any warranty (sold as seen) Dismantling, collection and transportation are the responsibility of the buyer. A 10-ton overhead crane is available. Specified company names and trademarks are the property of their respective owners and are used for identification and product description purposes only. Technical data deviations and errors in the article description are possible and subject to change.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Nova stroj Vertikalni stružilni stroj VADARI GmbH TYP SRM 2027 – 60 kN – možne tudi izvedbe z 90 kN ali 120 kN! STRUŽILNI STROJI IZDELANI V NEMČIJI. Iodpsuqbnhsfx Abxeic Opomba: Stroj je lahko ponujen tudi v različici z vlečno silo 90 kN (9 t) ali 120 kN (12 t). - Rabljen stroj (6 ton vlečne sile) trenutno na voljo – Stroj je po obnovi skoraj v novem stanju in ga lahko ugodno ponudimo. => Informacija za proizvodna podjetja oz. trgovce s proizvodnjo: Po potrebi lahko kupite naše načrte, pravice, nadomestne dele, podatke o strankah in interesentih ter načrte in proizvodno dokumentacijo (tudi za izvedbo z 9 ton vlečne sile) za stružilni stroj. Za več informacij nas kontaktirajte. => Novi stroji se izdelujejo po naročilu. Kratek dobavni rok je možen. => Nadomestni deli kot so vretena in vretenaste matice za Wolff SRM in VADARI SRM stružilne stroje so trenutno na voljo za takojšnjo dostavo. Gospodaren in izjemno robusten vertikalni stružilni stroj za dolgoletno uporabo. Stružilna orodja (tudi posebne igle za notranje zobljenje itd.) in dodatna oprema so na voljo po naročilu. Povprašajte posebej. Na našem stroju lahko uporabljate vsa stružilna orodja in nosilce drugih proizvajalcev! Popolna proizvodnja in montaža v naši tovarni v Nemčiji. Poleg tega nudimo nadomestne dele (vretena, vretenaste matice, motorji, zobniki in vse ostale potrebne dele – vključno z elektriko) tudi za Wolff in VADARI – SRM stružilne stroje. Vertikalni stružilni stroj tip SRM 2027 – NOV STROJ: 60 kN različica: Območje uporabe zajema predvsem izdelavo utorov za pero dimenzij od 3 do 28 mm (možno tudi večje) ter profilov podobnih dimenzij. Kompaktna in prostorsko varčna zasnova omogoča uporabo v malih, srednjih in velikih podjetjih. Zaradi ugodne cene je primeren tudi za manjše serije ali kosovno proizvodnjo. Pogon je izveden z menjalnim zavoro-motorjem s preklapljanjem polov. Brezvzdrževalni dvojni vretenasti pogon omogoča miren tek, centralno vlečno točko in konstantno rezalno moč. Prosta orodna miza omogoča tudi namestitev večjih obdelovancev brez težav. Obdelovance večinoma ni treba dodatno vpenjati. Nastavitev hoda je možna prek nastavljivih končnih stikal s končno omejitvijo. Pri krajših pestih/obdelovancih je mogoče narisati več kosov hkrati. Stružilne igle, dorne in rezervne dele na zahtevo. Tehnični podatki: Vlečna sila: 60 kN pri 3 m/min, 40 kN pri 6 m/min Hitrost struženja: 3 m/min + 6 m/min (opcija: brezstopenjska nastavitev hitrosti od 0 do 6 m/min z razširjeno elektroniko) Povratna hitrost: 6 m/min Hod: 1050 mm Dolžina orodja: 1200 mm Premer obdelovanca: poljubno Delovna miza: 450 x 350 mm Preboj mize: 140 mm Teža: cca 510 kg Tloris stroja: 750 x 570 mm Skupna višina stroja: 1510 mm Pogonska moč: 3,7 / 4,4 kW Električna oprema: 400 / 230 V, 50 Hz Krmilna napetost: 230 V Obratovalna napetost: 400 V, 50 Hz Barva: zunanjost RAL 7035/7036/7016, notranjost RAL 3000 Varnostna vrata: standardno Naprava za hlajenje: standardno Stroj ustreza veljavni direktivi o strojih in ima CE oznako.

Stanje: pripravljen za uporabo (rabljen), Na voljo je CNC vertikalni obdelovalni center Sigma. Hodi X/Y/Z: 850mm/480mm/580mm, dimenzije mize X/Y: 1000mm/540mm, največja obremenitev mize: 7000kg, število mest za orodja: 40, držalo orodja: SK40, hitrost vrtenja: 12000obr/min, moč: 15kW, navor: 15kW. Dimenzije stroja X/Y/Z: pribl. 3900mm/2200mm/2850mm, teža: pribl. 6500kg, krmilje: Heidenhain TNC 426M, delovni čas: pribl. 15855h. Vključen transporter za odrezke in notranje hlajenje (IKZ). Dokumentacija je na voljo. Ogled na lokaciji je možen. Iodsy S A N Espfx Abxoic

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) Iijdpoh R Taqofx Abxsc - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing Iedpfx Asmhhy Nebxsic (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Leto izdelave: 2009, stanje: zelo dobro (rabljeno), Centrifuga tipa 1-15 PK znamke Sigma je odlična za ločevanje raztopin in suspenzij z različno gostoto v epruvetah. Tehnične specifikacije Napetost: 230 V, 50-60 Hz Moč: 630 W Iiodpopa N R Tjfx Abxjc Hitrost: 14000 obr./min Zunanje mere (Š) x (G) x (V): 35 x 55 x 35 cm Rotor: 24 x 1,5/2 ml

Stanje: dober (rabljeno), Leto izdelave: 2015, LIFT SIGMA - C-HAK MACH-ID 7820 Manufacturer: LIFT SIGMA Model: C-HAK Iiedpfx Aswrzn Hebxec Year of manufacture: 2015 Length: 4200 mm Width: 1900 mm Height: 600 mm Weight: 8200 kg

Stanje: kot nova (razstavni stroj), ⭐ FRONIUS TPS 4000 ⭐ Fully Equipped Device Description / Scope of Delivery: Fronius TPS 4000 unit with full equipment – top specification! - Power source Pulse 400 Amps - FK 4000 FC cooling unit with optional filter, including flow control (==> if no water is circulating, the unit automatically shuts off to protect the torch hose assembly). - VR 4000 wire feeder with optional rollers underneath + extended interconnecting hose package + metal feed rollers – only premium components used. - Fronius AW5000 torch package with Job Master function on the torch (==> Display on the torch / adjustable amps, job selection, wire feed, and arc control directly on the torch) Photo = scope of delivery. All prices stated are starting prices. Pricing is tailored individually according to configuration requirements. Original price approx. €15,000 (net), offered at 1/3 of the new price. Not comparable to Transsteel scrap. Why buy from us and not somebody else? - We are professionals when it comes to this series of Fronius welding equipment. We always have around 60-80 units in stock. Only these Fronius models – no other brands! - We don’t just pass devices through – all units are dismantled, checked, wear parts replaced, and only once everything works flawlessly do we sell the equipment. - All our devices come with the popular Fronius torches. NO €100 "E*b*a*y" torch, but REAL QUALITY! Fronius torches cost between €650 and €900 net, depending on the configuration! - All our units are clean and have no burn marks on the displays or numerous burn holes / dents on the casing! You get from us an item that is presentable and not completely worn out! - As our customer, you benefit from affordable spare parts and support if needed. - You receive a proper invoice with VAT disclosed. All units can be viewed, paid for, and collected by appointment at our main warehouse in Vienna! Insured palletized shipping is, of course, possible! All prices are starting prices – you can customize your equipment with us. Iiodpfx Abevlwh Djxsc Robot device or manual unit. Long or short interconnecting hose package. Various hose packages available. Synchropulse. 270, 400, or 500 Amp units in stock. CMT version available as manual or robot model. It’s best to call us so we can discuss your application and provide you with an initial price estimate.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Krmiljenje: Heidenhain TNC 426 Letnik: 2000 Pomik X-os: 800 mm Pomik Y-os: 480 mm Pomik Z-os: 580 mm Izmenjevalec orodij: 50 mest Orodni nosilec: SK 40 Hitrost vretena: 12.000 min-1 Hladilna tekočina skozi vreteno (IKZ) Isdpfxoy R Ak Hj Abxjic Transporter za odrezke * cca 15.855 obratovalnih ur

Stanje: dober (rabljeno), Leto izdelave: 2000, MOTOR: Iiodpfeumadtsx Abxjc Proizvajalec: KAESER Model: SIGMA 33 Tip stroja: motor z močjo 90 kW Leto izdelave: 2000 Serijska št.: 1340 Tlak: 15 bar VIJAČNI STUPEŇ: Proizvajalec: SCHORCH Model: KA7317S-8X3Z-350 Tip stroja: vijačni stupen Leto izdelave: 2000 - 960 kg - 1785 vrt/min

Stanje: rabljeno, Leto izdelave: 1996, skupna višina: 2.570 mm, skupna dolžina: 3.520 mm, skupna širina: 2.350 mm, Poids à vide : 6 000 kg Prix : Sur demande - Année de fabrication : 1996 - Documentation disponible : Oui - Marquage CE présent : Oui - Certificat CE disponible : Non - Numéro de série : M2058 Iedpfx Absw Slaxexeic - Commande : CNC - Nombre d’axes [pièces] : 3 - Course axe X [mm] : 750 - Course axe Y [mm] : 420 - Course axe Z [mm] : 450 - Longueur de la table [mm] : 900 - Largeur de la table [mm] : 420 - Vitesse de broche min. [tr/min] : 40 - Vitesse de broche max. [tr/min] : 8 000 - Dimensions de transport : 3 520 mm x 2 350 mm x 2 575 mm (L x l x h) - Poids de transport [kg] : 6 000 kg Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/régime de la marge : TVA déductible pour les entreprises Livraison et reprise possibles à tout moment pour tout équipement industriel Lukas van Rossum

Stanje: novo, Leto izdelave: 2021, številka stroja/vozila: 218, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 5.500 mm, pomik osi Y: 2.800 mm, pomik po osi Z: 1.000 mm, proizvajalec krmilnikov: OSAI, skupna višina: 8.100 mm, skupna dolžina: 5.100 mm, skupna širina: 3.400 mm, model krmilnika: OPENkey, moč vretenovega motorja: 7.400 W, število vreten: 4, hitri pomik na osi Z: 38 m/min, hitro pomikanje X-os: 90 m/min, hitri pomik os Y: 54 m/min, največja hitrost vretena: 24.000 obr/min, hitrost vretena (min.): 3.000 obr/min, Oprema: CE označba, dokumentacija / priročnik, Obniżyliśmy cenę!!! NOWA CENA TYLKO 130 000 EURO!!! Cena obowiązuje tylko do 28 maja 2026 r.! Skorzystaj z okazji! Zapraszamy do zakupu NOWEGO i wysoce zaawansowanego 5-OSIÓWEGO CENTRUM OBRÓBCZEGO renomowanej firmy FANUM. Prezentowane centrum obróbcze przeznaczone jest do obróbki: - drewna, - materiałów drewnopochodnych, - aluminium, - tworzyw sztucznych, - kompozytów, - materiałów o podobnej twardości (m.in. CORIAN, DIBOND, MDF, HPL, HIMAX itd.). Oferujemy nowe urządzenie SIGMA, wyposażone wyjątkowo bogato. Maszyna jest całkowicie nowa – poniższa specyfikacja przedstawia jej funkcje, parametry oraz możliwości produkcyjne. FANUM od lat słynie z niezawodności, precyzji, wysokiej mocy i szybkiej pracy. CENTRUM OBRÓBCZE, które oferujemy, JEST FABRYCZNIE NOWE. Zakupione zostało w 2021 roku od FANUM Sp. z o.o. i dostarczone przez producenta na nasz teren. Serwis FANUM Sp. z o.o. ograniczył się jedynie do rozruchu maszyny – urządzenie nie było używane. Jego stan można określić jako CAŁKOWICIE NOWY. Oferowany przez nas model jest wyjątkowo bogato wyposażony i posiada praktycznie wszystko, czego można potrzebować. Obecnie nowe urządzenie kosztuje około 282 350 EUR netto, czyli 1 200 000 PLN netto. Mamy bezpośredni kontakt oraz wsparcie producenta FANUM Sp. z o.o. Istnieje możliwość ponownego uruchomienia maszyny oraz jej demonstracji w naszej siedzibie. Oczywiście, urządzenie można przetransportować do nowego właściciela i uruchomić bezpośrednio w jego zakładzie przez serwis FANUM. Oferowana przez nas cena obejmuje samo urządzenie, ale na życzenie sporządzimy również ofertę z montażem i uruchomieniem w nowym miejscu. Naszym zdaniem, oferowany przez nas rabat przekraczający 40% wartości nowej maszyny (ponad 117 640 EUR netto, tj. ok. 500 000 PLN netto) czyni tę propozycję niezwykle atrakcyjną dla wszystkich, którzy poszukują podobnego urządzenia do parku maszynowego, bądź nie zakładali w swoim budżecie na CENTRUM OBRÓBCZE zakupu nowoczesnej, fabrycznie nowej i tak wydajnej maszyny. Uwagi ogólne dotyczące oferty sprzedaży: • Pomimo że maszyna jest NOWA, została wyprodukowana w 2021 r. i nie udzielamy na nią żadnej gwarancji; • Maszyna nie podlega zwrotowi; • Cena podana w ogłoszeniu nie obejmuje VAT (23% dla kupujących z Polski), który zostanie doliczony do faktury — prosimy o weryfikację sposobu podania ceny; • Jeden właściciel. * Cena w EUR obliczona na podstawie kursu NBP – 1 EUR = 4,25 PLN. Witamy wszystkich użytkowników platformy MACHINESEEKER. Jesteśmy nowymi użytkownikami tego portalu. Nie jesteśmy firmą meblarską, produkcyjną ani handlującą maszynami – posiadamy liczne nieruchomości w Polsce i jesteśmy deweloperem budującym domy oraz apartamenty w Warszawie. Oferowane maszyny są naszą własnością – pozyskaliśmy je w rozliczeniach z najemcami z branży meblarskiej. Znamy ich historię i stan, co opisujemy zgodnie z rzeczywistością. Utrzymujemy kontakt z producentami maszyn, którzy w razie potrzeby mogą służyć wsparciem – m.in. Homag, Otto Martin, OMC Machinery, FANUM. Ponieważ te maszyny nie są nam potrzebne, ich ceny są wyjątkowo atrakcyjne, zwłaszcza że są praktycznie nowe. Oferujemy pomoc w transporcie na terenie Polski i całej UE. Zapraszamy do obejrzenia maszyn przed zakupem. Pozdrawiamy serdecznie. Iodpfxsyn Ri Ro Abxoic

Stanje: dober (rabljeno), Transportni nosilci, nosilec za žerjav - Rezervni del: iz obdelovalnega centra proizvajalca Sigma tip Mission 5 Iiodpfx Abscnf E Usxoc - Nosilec: Ø 140 mm - Rezes nosilec: Ø 80 mm - Razmak lukenj: Ø 110 mm - Količina: na voljo 4 kosi - Cena: za komplet - Teža: 23 kg

Leto izdelave: 1987, stanje: novo, Нови оригинални резервни части Huta Zigmunt 3 500 … 17 500 kgm. Iisdjlnlmvepfx Abxjc

Stanje: zelo dobro (rabljeno), ENOSTRANSKA ROBNA LEPILKA (Leva) Debelina roba na kolutu (min/max) mm 0,3 / 3 Debelina roba v letvicah / trakcih (min/max) mm 0,4 / 20 Debelina plošče (min/max) mm 8 / 60 NOV (v 2024) krmilni sistem Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Podajalna hitrost do 25 m/min Uvajalni sistem EZ 14 Iiodpjyyvp Uefx Abxjc Razpršilna enota (za tekoči premaz proti sprijemanju) Nastavljivo vodilno letev upravljano s CNC Enota za obrezovanje 2 x Kw 3 Lepilna enota (P.U.R. lepilo + predtalilnik) Cona za pritisk roba (CNC upravljanje) Magazin za robove v kolutih (predal št. 2) Kapa agregat HL 84 (2 x Kw 0,5 približno) Pnevmatsko nihanje in nastavitev Predrezalna enota BF 20 (2 x Kw 1,5 približno) Multifunkcijska enota (radiusno in oblikovno rezkanje) FK 11 (2 x Kw 0,4 približno) Profilni potezni noži Finish enota (ravni potezni noži + polirna enota) FA 11 203019) Št. 1 sistem za vračanje "LIGMATECH" Mod. ZHR 541/L/095 (s portalskim mostom in 360° vrtljivo sesalno glavo)

Stanje: zelo dobro (rabljeno), RETURN SYSTEM for Edgebanding Machine (LEFT) When combined with a single-sided edgebanding machine, this system allows a single operator to continuously feed the machine (the processed workpiece is automatically returned to the operator). Roller conveyor with 180° conveyor belts: 2600 mm x 1800 mm 1st Conveyor line: 7000 mm x 900 mm 2nd Conveyor line: 2500 mm x 850 mm Iodogz Atbopfx Abxeic Model: BOOMERANG BONSAI

Stanje: zelo dobro (rabljeno), A) Case clamp with CNC (electronic) Type MDE 110/28/08 Motorized transport and assembly conveyor Feed speed: 12 - 40 m/min CNC control Power Control PC C 22 T Iiodelkbn Iopfx Abxsc Total power 14 kW Overall machine length 6,220 mm Processing capacity for workpieces (mobile): Length Min / Max: 250 / 2,800 mm Depth Min / Max: 120 / 800 mm Height Min / Max: 280 / 1,320 mm B) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm) C) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, The subject of this offer is a used G2000 bun production line with a Mini Rex Futura divider-rounder from 2009. Designed for the production of buns: • round, stamped • elongated, unstamped Iisdpfx Abjy And Njxoc • cut • rolled • Kaisersemmel • hot dog • Poznań style Product description: • Fully automatic and compact bun production line • Based on the rotary Mini Rex Futura divider-rounder from 2009 • 2-row operation • Manual product removal from the discharge conveyor • Stamping station with easily interchangeable tools; set includes heads for: Kaiser roll, Corinthian • Integrated elongating and flattening unit • Weight range: - for stamped buns: 25g to 75g dough piece weight – capacity: 1,800 pcs/h to 2,640 pcs/h - for unstamped buns: 80g to 125g dough piece weight – capacity: 1,800 pcs/h to 3,960 pcs/h • Proofing time: approx. 6 min at 2,000 pcs/h output • Dough types: wheat, graham, yeast, donuts • One-person operation The machine is currently undergoing a complete overhaul, which should be completed by mid-June 2026. Photos show a similar bun production line after a complete overhaul at Cream Serwis. If you are interested in the price or would like to receive more photos, please contact us.