Hesse By Lfss Hp 40 nakup rabljenega (35.772)

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roller: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 10 mm Max. sheet thickness with pre-bending at D=5x top rollers: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 8 mm Top roller diameter: 220 mm Lower roller diameter: 200 mm Side roller diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg Prjdeynmx Ispfx Al Dob 4-roll design Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll lifting Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,900 Leasing rate: €1,056.51 Bending length: 3,100 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roller: 8 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 7 mm Max. sheet thickness with pre-bending at D=5x top roller: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 5 mm Top roller diameter: 245 mm Bottom roller diameter: 245 mm Side roller diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,850 kg Predpjyb Sz Ijfx Al Dsb 4 rollers Top roller drive via hydromotor and planetary gearbox, bottom roller drive via gear and cardan shaft Hydraulic adjustment of bottom and side rollers Digital readout for bottom and side roller positions Hardened rollers Cone bending device Hydraulic relief for top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel CE-compliant equipment OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4800 mm Width: 1600 mm Height: 1470 mm Weight: 6170 kg 4 rollers Top roll drive via hydraulic motor and planetary gearbox; bottom roll driven via gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for position of bottom and side rolls Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment conforms to CE regulations Pedjyb Sykopfx Al Dorb OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the rated capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €34,400 Leasing rate: €657.04 Saw frame: Dual-column guide Saw blade dimensions: 4380 x 34 x 1.1 mm Variable blade speed: 20-100 m/min Psdpfx Aljwirhro Dorb Cutting capacity 0° round: 325 mm Cutting capacity 0° square: 325 mm Cutting capacity 0° flat: 400 x 325 mm Cutting capacity 30° round: 325 mm, square: 325 mm Cutting capacity 45° round: 300 mm, square: 265 mm Cutting capacity 60° round: 190 mm, square: 190 mm Working height: 655 mm Hydraulic motor: 1.1 kW Main motor: 2.2 kW Coolant pump motor: 0.12 kW Length: 2,130 mm Width: 2,150 mm Height: 1,650 mm Weight: 1,860 kg NC control Dual-column guide with linear rails 3° cutting angle Chip brush Control panel Hydraulic feed vice Hydraulic vice Hydromechanical blade tensioning Inverter Optical height adjustment Proximity switch for blade slip detection Pressure adjustment Coolant pump Saw blade Safety switch Operating manual in GERMAN or ENGLISH OPTIONS: Hydraulic bundle clamping device Micro spray unit Laser cutting line Roller conveyors and saw blades ALTERNATIVE: BMSO 325 CGS NC (with servo feed instead of hydraulic feed) €38,900

Stanje: novo, Condition: new Prsdpfx Aloyb Szhe Djb Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €28,450 Leasing rate: €543.40 Bending length: 1,550 mm Max. bending capacity – construction steel: 7 mm Max. sheet thickness without pre-bending at D=5x top roller: 7 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 3.5 mm Top roller diameter: 150 mm Bottom roller diameter: 150 mm Side roller diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3,750 mm Width: 960 mm Height: 1,100 mm Weight: 2,500 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, lower rollers driven by gear and cardan shaft Hydraulic adjustment of lower and side rollers Digital display for lower and side roller positions Hardened rollers Cone bending device Hydraulic release of top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE directive OPTIONS: (Delivery time with options approx. 10 weeks) Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Maximum sheet thickness is 50% of rated capacity Cone length must be max. 30% or more than 60% of roller length Hardened rollers are recommended

Stanje: novo, Stanje: novo Dobavni rok: približno 14–16 tednov od naročila Država izvora: Turčija Cena: 97.600 € Mesečni obrok lizinga: 1.844,64 € Prjdjwiqu Rspfx Al Dsb Sila stiskanja: 160 to Nominalna sila stiskanja pri 6 mm Dolžina mize: 750 mm Širina mize: 1100 mm Premer luknje v mizi: 230 mm Hod: 1–172 mm Število hodov: 45 1/min Število vodil za bat: 6 Nastavitev bata: 100 mm Premer luknje v batu: 80 mm Izvis: 375 mm Višina vgradnje: 540 mm Motor: 11 kW Dolžina: 1890 mm Širina: 1950 mm Višina: 3650 mm Teža: 15.500 kg Varjena jeklena okvirna konstrukcija 8-kanalno vodilo za bat Pnevmatska kombinacija sklopke in zavore Zaščitno ohišje z optičnimi senzorji in stranskimi vrati Hidravlična zaščita pred preobremenitvijo Dvojna upravljanje z ročnimi in nožnimi pedali Ročna nastavitev hoda Motorizirana nastavitev bata Nastavljivo število hodov preko frekvenčnega spreminjalnika Načini delovanja: Način nastavitve Sprožitev z obema rokama Sprožitev z nogo Delovanje v dveh taktnih načinih preko optičnih senzorjev Neprekinjeno delovanje Na dotik občutljiv zaslon za: Števec hodov z možnostjo prednastavitve za neprekinjeno delovanje Nastavitev števila hodov Intervali in trajanje mazanja Alarmna sporočila Smer vrtenja motorja Nadzor vhodov in izhodov 2 prosti gredi za priključitev periferije Avtomatsko centralno mazanje Oprema v skladu s standardi CE Simbolične fotografije, prikaz vključuje dodatno opremo, ki je na voljo MOŽNOSTI: Vibracijske blazinice 192,00 € Napetna plošča Po dogovoru Hidravlična zaščita pred preobremenitvijo Po dogovoru itd.

Stanje: novo, Stanje: novo Dobavni rok: približno 14–16 tednov od naročila Država izvora: Turčija Cena: 61.200 € Mesečni leasing: 1.156,68 € Sila stiskanja: 80 to Nominalna sila stiskanja pri 4 mm Dolžina mize: 600 mm Širina mize: 900 mm Prehodna luknja v mizi: 200 mm Hod: 1–110 mm Število hodov: 60 1/min Število vodil za bat: 6 Nastavitev bata: 80 mm Luknja za čep v batu: 50 mm Izmet: 300 mm Višina vgradnje: 400 mm Motor: 7,5 kW Dolžina: 1600 mm Širina: 1500 mm Višina: 2750 mm Teža: 5700 kg Varjena konstrukcija jeklenega okvirja 8-kratna vodila za bat Pnevmatična kombinacija sklopke in zavore Zaščitno ohišje z optičnimi senzorji in stranskimi vrati Hidravlična zaščita pred preobremenitvijo Dvojna upravljalna enota za ročno in nožno pedalo Ročna nastavitev hoda Motorizirana nastavitev bata Spremenljivo število hodov prek frekvenčnega pretvornika Načini delovanja: * Način nastavitve * Sprostitev z obema rokama * Sprostitev z nogo * 2-taktni način delovanja prek optičnih senzorjev * Neprekinjeno delovanje Na dotik občutljiv zaslon za: * Števec hodov z možnostjo prednastavitve za neprekinjeno delovanje * Nastavitev števila hodov * Intervali in trajanje mazanja * Alarmi * Smer vrtenja motorja * Nadzor vhodov in izhodov 2 prosta greda za priključitev periferije Avtomatsko centralno mazanje Oprema v skladu s predpisi CE (Simbolične fotografije) MOŽNOSTI: Vibracijski blažilniki 192,00 € Namizna plošča Po dogovoru Prsdpfxswiq I Dj Al Deb Hidravlična zaščita pred preobremenitvijo Po dogovoru itd.

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity – mild steel: 10 mm Max. plate thickness without pre-bending (at D = 5x top roll): 10 mm Max. plate thickness without pre-bending (at D = 1.5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 1.5x top roll): 6 mm Top roll diameter: 200 – 220 mm Lower roll diameter: 200 – 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gears and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Prsdsynmyfjpfx Al Djb Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be a maximum of 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: rabljeno, Leto izdelave: 2022, Odličen ByStar 4020 vlakenski laser z lasersko močjo 15 kW in avtomatizacijo ByTrans Extended. Vključuje menjalec šob, mešanje plinov in zunanjo verzijo za odsesavanje prahu. Psdsy Erfvspfx Al Derb Ogled možen po dogovoru. Delovne dimenzije: 4000 x 2000 mm Izhodna moč laserja: 15000W Avtomatizacija: ByTrans Extended Obratovalne ure: 5734h Ure rezanja: 1570h

Stanje: novo, Stanje novo Dobavni rok cca 12 tednov od naročila Država porekla Turčija Cena 43.000 € Leasing obrok 821,3 € Dolžina upogibanja 2050 mm Maks. zmogljivost upogibanja – konstrukcijsko jeklo 10 mm Maks. debelina pločevine brez predupogiba – konstrukcijsko jeklo 10 mm Maks. debelina pločevine s predupogibom – konstrukcijsko jeklo 8 mm Maks. debelina pločevine brez predupogiba pri D=5x zgornji valj 10 mm Maks. debelina pločevine brez predupogiba pri D=1,5x zgornji valj 8 mm Maks. debelina pločevine s predupogibom pri D=5x zgornji valj 8 mm Maks. debelina pločevine s predupogibom pri D=1,5x zgornji valj 6 mm Premer zgornjega valja 200 mm Premer spodnjega valja 200 mm Premer stranskega valja 180 mm Hitrost valjanja 6 m/min Dolžina 3850 mm Širina 1350 mm Višina 1290 mm Teža 3750 kg Motoriziran pogon valjev Zgornji in spodnji valj poganjana Hidravlično pozicioniranje stranskih valjev 3 digitalni prikazovalniki Hidravlične odklopne ležaje Kaljeni valji Stožčasta upogibna naprava Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI OPCIJE (CENE NA ZAHTEVO): Pedpfeyb S Arex Al Derb Zgornja podpora Stranska podpora Spremenljiva hitrost NC krmiljenje

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €144,300 Leasing rate: €2,727.27 Press force: 320 t Bending length: 3,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 2,600 mm Throat depth: 410 mm (side frame) Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Motor power: 2 x 11 kW Length: 4,300 mm Width: 1,820 mm Height: 3,330 mm Weight: 16,500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X, and R) CNC CONTROL SKY 22: - Full HD graphic display 21.5” with 2D and 3D visualization of programmed part - Intuitive touchscreen operation (easy drawing of bending contour with finger) - Operator-friendly dialog-based programming in either 2D or 3D mode - 2D and 3D simulation of the bending process Pedpfxewiqpho Al Djrb - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet blank - Automatic bend sequence calculation - Graphical product and tool storage - Correction function - USB ports and Ethernet connection for import, backup, and program transfer - Windows operating system - Import support for IGES, STEP, DXF files Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning system Top tool 1010/A/75°, segmented and gooseneck 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Fiessler AKASam laser safety device mounted on upper beam Sheet support arms on linear guides Equipment according to CE standards Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during upper beam movement - Low energy consumption - Low noise emission - High speed Options: Z1/Z2 axes CNC control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability Quick-release clamping levers for the upper tool

Stanje: novo, Condition: new Delivery time: approx. 4 months from order Country of origin: Turkey Price: €82,900 Leasing rate: €1,566.81 Predsynm N Tjpfx Al Deb Saw frame: double column guide Saw blade dimensions: 8400 x 54 x 1.6 mm Infinitely variable blade speed: 20–100 m/min Cutting capacity 0° round: 650 mm Cutting capacity 0° flat: 1000 x 600 mm Cutting capacity 45° rectangular: 660 x 600 mm Cutting capacity 60° rectangular: 440 x 600 mm Cutting capacity -45° rectangular: 660 x 600 mm Working height: 880 mm Hydraulic motor: 4 kW Main motor: 7.5 kW Coolant pump motor: 0.12 kW Length: 4400 mm Width: 2270 mm Height: 2660 mm Weight: 6520 kg Hydraulic vice Digital display for angle indication Hydraulic clamping of the saw arm Manual saw arm rotation Infinitely adjustable lowering speed of saw arm Automatic saw frame lift after cut completion Sensitive cutting pressure regulation depending on material properties Hydromechanical blade tension, readable via manometer Mobile control panel Helical bevel heavy-duty gearbox Powered chip brush Blade guide with carbide plates and rollers Automatic blade breakage detection Coolant system HYDRAULIC SAW FRAME LIFTING Operating manual in GERMAN or ENGLISH

Stanje: novo, Condition: new Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €48,500 Leasing rate: €926.35 Press force: 60 tons Nominal press force at 3.5 mm Table length: 500 mm Table width: 700 mm Through-hole in table: 190 mm Stroke: 1 - 100 mm Strokes per minute: 65 Ram guides: 4 Ram adjustment: 70 mm Ram bore: 45 mm Throat depth: 260 mm Prjdpfxowwwtie Al Dsb Installation height: 340 mm Motor: 5.5 kW Length: 1250 mm Width: 1350 mm Height: 2400 mm Weight: 3500 kg Welded steel frame construction 4-fold ram guidance Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Operating modes: * Setup mode * Two-hand release * Foot release * 2-cycle operation via light barriers * Continuous operation automatic central lubrication Equipment according to CE regulations OPTIONS: Vibration pads Clamping plate

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Predjynmzpjpfx Al Dsb Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity - structural steel: 9 mm Max. plate thickness without pre-bending at D=5x upper roll: 9 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 7 mm Max. plate thickness with pre-bending at D=5x upper roll: 7 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Stanje: novo Dobavni rok: približno 3-6 tednov po naročilu Država izvora: Turčija Cena: 130.600 € Leasing obrok: 2.468,34 € Pritisna sila: 200 t Dolžina mize: 1.200 mm Širina mize: 740 mm Prehodna odprtina v mizi: 220 mm Hod: 24 - 140 mm Število hodov: 50 1/min Tlačilo: 950 x 600 mm Nastavitev tlačila: 100 mm Globina: 390 mm Motor: 15 kW Dolžina: 2.350 mm Širina: 1.700 mm Višina: 3.435 mm Teža: 14.900 kg 8-točkovno vodilo tlačila Sprednje varovalo z varnostno svetlobno zaveso Motorizirana nastavitev tlačila Hidravlična zaščita pred preobremenitvijo Avtomatsko mazanje Pjdpfx Asynnb Del Dorb Oprema v skladu s CE direktivami Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Podsypbquopfx Al Derb Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Turkey Price: €32,000 Psdpfxowiq Hgo Al Djrb Leasing rate: €611.20 Saw frame: Double column guide Saw blade dimensions: 5000 x 34 x 1.1 mm Variable band speed: 20 - 120 m/min Cutting capacity 0° (round): 330 mm Cutting capacity 0° (square): 330 mm Cutting capacity 0° (flat): 350 x 330 mm Working height: 845 mm Hydraulic motor: 1.1 kW Main motor: 3 kW Coolant pump motor: 0.12 kW Length: 2815 mm Width: 1935 mm Height: 1855 mm Weight: 2560 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple feed) Omron touchscreen, up to 50 different cutting lengths and 30 programs can be saved Linear guide 41 mm saw blade Control panel Hydraulic vise Hydro-mechanical band tensioning Heavy-duty gearbox Coolant system Sensitive pressure adjustment Inverter for infinitely variable band speed Chip brush Optical height adjustment Chip conveyor Operating manual in GERMAN or ENGLISH OPTIONS: Roller conveyors and saw bands available upon request

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €160,788 Leasing rate: €3,038.89 Laser power: 3 kW Max. sheet thickness - mild steel: 12 mm Max. sheet thickness - stainless steel: 6 mm Prjdpfx Alewiqr Aj Djb Max. sheet thickness - aluminum: 6 mm Max. sheet thickness - copper: 3 mm Max. sheet thickness - brass: 6 mm Total connected load: 26.5 kW Max. tube diameter: 250 mm Min. tube diameter: 16 mm Max. dimensions for square profiles: 160 x 160 mm Max. dimensions for rectangular profiles: 200 x 150 mm Max. profile length: 6,000 mm Max. profile weight: 58 kg/m Positioning accuracy: +/- 0.2 mm Repeatability: +/- 0.05 mm Profile types: round, square, rectangular Max. X-axis speed: 40 m/min Max. Y-axis speed: 94 m/min Max. Z-axis speed: 30 m/min Max. A-axis speed: 510 °/s The system includes the following components: - Enclosed cutting area with safety glass - CNC graphic control with touchscreen - Brilase 3 kW premium laser source incl. chiller - Cutting head with automatic focus adjustment - Manual loading - Manual unloading table, 3 m - Positioning laser - Central lubrication - Scrap container - CAD/CAM software with autonesting - Work area lighting PRICE FCA TURKEY OPTIONS: - Extraction unit with filters - Semi-automatic front loading system - 6 m unloading table with conveyor unit - Durma Cloud license - Laser source with 4 or 6 kW (on request)

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po naročilu Država porekla: Turčija Cena: 31.620 € Leasing rata: 603,94 € Debelina pločevine – konstrukcijsko jeklo: 0,4 – 2 mm Maks. širina pločevine: 600 mm Maks. presek: 1200 mm² Pedjynnf Njpfx Al Derb Premer podajalnih valjev: 80 mm Hitrost podajanja: 75 m/min Pospešek podajanja: 10 m/s² Motorni navor: 10 Nm Stožčasti čelni zobniški prenos WATTDRIVE (Izdelano v Avstriji) Pnevmatski sistem FESTO Servo pogon in krmiljenje SIEMENS 7'' barvni zaslon na dotik SIEMENS 2 gnana valja Zunanji enkoder OPCIJA: Rokov koles in Simlinx daljinski servisni modul 4.290 €

Stanje: novo, Condition: New Delivery time: approx. 4 months from order placement Country of origin: Turkey Price: €27,700 Lease rate: €529.07 Saw frame: double-column guide Saw blade dimensions: 6000x41x1.3 mm Infinitely variable blade speed: 20-100 m/min Cutting capacity at 0° round: 560 mm Cutting capacity at 0° square: 560 mm Prsdpfxjwiqt Hj Al Deb Cutting capacity at 0° flat: 750x560 mm Cutting capacity at 45° round: 410 mm, square: 410 mm Working height: 590 mm Hydraulic motor: 1.1 kW Main motor: 4 kW Coolant pump motor: 0.12 kW Length: 3400 mm Width: 1000 mm Height: 2050 mm Weight: 2045 kg Saw blade inclined by 2° Linear guides Operator control panel Material sensor pin Coolant system Roller conveyor 1200 mm Hydraulic vice Hydromechanical blade tensioning Frequency inverter for stepless blade speed adjustment Adjustable cutting pressure Saw blade brush Optical height control Safety switch Operating manual in GERMAN or ENGLISH OPTIONS: Swivel base for miter cuts Hydraulic material clamping from above Minimum quantity lubrication Laser cutting line Roller conveyors and saw blades

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €88,113 Leasing rate: €1,665.34 Pressing force: 220 t Bending length: 3,050 mm Axes: Y1 / Y2 / X axis Stroke: 265 mm Distance between uprights: 2,600 mm Throat depth: 450 mm (side frame) Installation height: 530 mm Drive system: hydraulic Rapid traverse Y-axis: 140 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 250 l Motor power: 22 kW Length: 4,250 mm Width: 1,770 mm Height: 3,000 mm Weight: 12,600 kg Standard equipment: – 3 axes (Y1, Y2, X) – CNC control DT-15 - 2D graphic display 15” - Intuitive touch-screen operation (easy drawing of bending contour with finger) - User-friendly dialog-based programming - Automatic bending sequence calculation - Automatic calculation of developed length for sheet cutting - Graphic product and tool memory - Correction options - USB ports for backup and program transfer - PC software allowing programs to be written on PC and then transferred to the machine via USB – Servo-driven backgauge on linear guides and ballscrews – Backgauge finger blocks on double linear guides – CNC-controlled crowning – Upper tool 1010/A/75°, segmented and offset – 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) – Laser safety device Fiessler AKAS mounted on upper beam – Sheet support arms on linear guides – Equipment according to CE directives – Oil filling – Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S SERIES: – Greater stroke, installation height, and throat depth – Higher approach and return speeds of the upper beam – Increased backgauge speed – Backgauge fingers mounted on double, not single, linear guides – More available options, e.g., additional backgauge axes (such as Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem configuration, alternative CNC controls, etc. Podpfewiqudox Al Djrb OPTIONS: – R-axis – R/Z1/Z2 axes – CNC control Delem DA66 S – CNC control DELEM DA-69S 3D incl. PC software Profile-S with import function for 3D files – Hydraulic or pneumatic tool clamping for Euro or Wila tooling

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €102,300 Leasing rate: €1,933.47 Pressing force: 80 tons Bending length: 2,550 mm Axes: 4 Stroke: 320 mm Distance between uprights: 2,840 mm Installation height: 500 mm Drive concept: servo-motorized belt drive Rapid traverse Y-axis: 105 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 105 mm/s Back gauge travel X-axis: 650 mm Back gauge travel R-axis: 250 mm Length: 3,700 mm Width: 2,200 mm Height: 2,550 mm Weight: 6,400 kg Servo-motorized drive Power transmission via multi-guided flat belt 4 axes (Y1, Y2, X, R) CNC control DELEM DA-66S - 17" 2D graphics display - 3D visualization in simulation and production - Intuitive touch screen operation (easy drawing of bending contours with finger) - Simple and convenient data transfer - Multi-simulation capability - User-friendly dialog programming - Graphical simulation of bending process Servo-driven back gauge with linear guides and ball screws Back gauge finger blocks with double linear guides Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8/105, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm), segmented, entry radii hardened and ground BLVT light barrier safety system Sheet support arms with linear guides Side and rear safety barriers Equipment in accordance with CE regulations Operating instructions in GERMAN or ENGLISH Advantages of this design: - No reduction of working width due to side frames, distance between uprights is larger than the bending length - Up to 30% higher productivity versus conventional hydraulic press brakes Pedpfx Asynndfsl Dorb due to almost instantaneous pedal signal response - Minimal frame deflection - No crowning system required as bending force is applied over many points along bending length - High repeatability and bending accuracy throughout entire bending length - Low energy consumption - No hydraulic components Options: CNC control DELEM DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Stanje novo Dobavni rok cca 12 tednov od naročila Država izvora Turčija Cena 38.000 € Leasing obrok 725,8 € Dolžina upogibanja 2050 mm Maks. zmogljivost upogibanja – konstrukcijsko jeklo 8 mm Maks. debelina pločevine brez predupogiba – konstrukcijsko jeklo 8 mm Maks. debelina pločevine s predupogibom – konstrukcijsko jeklo 6 mm Maks. debelina pločevine brez predupogiba pri D=5x zgornji valj 8 mm Maks. debelina pločevine brez predupogiba pri D=1,5x zgornji valj 6 mm Maks. debelina pločevine s predupogibom pri D=5x zgornji valj 6 mm Maks. debelina pločevine s predupogibom pri D=1,5x zgornji valj 4 mm Premer zgornjega valja 180 mm Premer spodnjega valja 180 mm Premer stranskega valja 150 mm Hitrost valjanja 5 m/min Dolžina 3850 mm Širina 1350 mm Višina 1290 mm Teža 3300 kg Motoriziran pogon valjev Pedpfx Aeyb S Afsl Djrb Poganjana zgornji in spodnji valj Hidravlično nastavljanje stranskih valjev 3 digitalni prikazovalniki Hidravlična preklopna ležišča Kaljeni valji Naprava za konusno upogibanje Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI

Stanje: novo, Stanje: novo Rok isporuke: oko 14 - 16 nedelja od porudžbine Zemlja porekla: Turska Cena: 29.800 € Leasing rata: 569,18 € Okvir testere: zakretni okvir Dimenzije tračne testere: 3660x27x0,9 mm Brzina trake: kontinuirano podesiva 15-120 m/min Kapacitet sečenja 0° okruglo: 320 mm Kapacitet sečenja 0° kvadrat: 320 mm Kapacitet sečenja 0° ravno: 350x320 mm Kapacitet sečenja 30° okruglo: 170 mm, kvadrat: 150 mm Kapacitet sečenja 45° okruglo: 260 mm, kvadrat: 220 mm Kapacitet sečenja 60° okruglo: 320 mm, kvadrat: 280 mm Radna visina: 740 mm Hidraulički motor: 1,1 kW Motor: 2,2 kW Servomotor: 1 kW Motor pumpe za rashladno sredstvo: 0,12 kW Dužina: 2120 mm Širina: 2100 mm Visina: 1810 mm Težina: 1810 kg NC kontrolni panel Servo pomeranje sa kugličnim navojnim vretenima Hidraulička stezna glava Hidromehaničko zatezanje trake Inverter Pedpfowirhljx Al Djrb Pumpa za hlađenje Tračna testera Četka za strugotinu Sigurnosni prekidač Podešavanje visine Uputstvo za upotrebu na NEMAČKOM ili ENGLESKOM OPCIJE (CENE NA UPIT): Hidraulički uređaj za stezanje paketa Transportni valjci i tračne testere

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2,050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness without pre-bending at D=5x top roll: 6 mm Max. plate thickness without pre-bending at D=1.5x top roll: 4 mm Max. plate thickness with pre-bending at D=5x top roll: 4 mm Max. plate thickness with pre-bending at D=1.5x top roll: 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4,250 mm Width: 960 mm Height: 1,100 mm Weight: 2,800 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment in accordance with CE regulations OPTIONS: Psdpfeyb Szbsx Al Dsrb Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended