Hesse By Coiltech Cmc P3 1250 400 M D1300 nakup rabljenega (86.611)

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €28,450 Leasing rate: €543.40 Bending length: 1,550 mm Max. bending capacity – construction steel: 7 mm Max. sheet thickness without pre-bending at D=5x top roller: 7 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=5x top roller: 4.5 mm Ibjdjyb Szhspfx Amuob Max. sheet thickness with pre-bending at D=1.5x top roller: 3.5 mm Top roller diameter: 150 mm Bottom roller diameter: 150 mm Side roller diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3,750 mm Width: 960 mm Height: 1,100 mm Weight: 2,500 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, lower rollers driven by gear and cardan shaft Hydraulic adjustment of lower and side rollers Digital display for lower and side roller positions Hardened rollers Cone bending device Hydraulic release of top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE directive OPTIONS: (Delivery time with options approx. 10 weeks) Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Maximum sheet thickness is 50% of rated capacity Cone length must be max. 30% or more than 60% of roller length Hardened rollers are recommended

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: 75061713008, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 11.255 h, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 30 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, stiskalna sila: 200 t, hod: 210 mm, širina mize: 104 mm, dolžina mize: 3.050 mm, višina mize: 858 mm, globina grla: 250 mm, razmak između stupova: 2.550 mm, kapaciteta rezervoarja za olje: 150 l, skupna dolžina: 4.500 mm, skupna širina: 1.400 mm, skupna višina: 2.520 mm, skupna masa: 8.000 kg, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, Znamka: Hesse by Durma Ijdpfjzcxb Dex Amujbb Tlačna sila: 200 ton Leto izdelave: 2017 Dolžina upogibanja: 3050 mm Vključno z različnimi orodji Cena: 35.000,- neto

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Pressing force: 100 t Nominal pressing force at 4.5 mm Table length: 700 mm Table width: 1,000 mm Pass-through hole in table: 210 mm Stroke: 1 - 132 mm Strokes per minute: 58 1/min Ram guides: 6 Ram adjustment: 90 mm Ram bore diameter: 60 mm Throat depth: 300 mm Installation height: 445 mm Isdpfx Amewiqq Ssuebb Motor: 7.5 kW Length: 1,650 mm Width: 1,545 mm Height: 3,011 mm Weight: 7,000 kg Welded steel frame construction Crankshaft made of AISI4140 (42 CrMo4), ground Bronze bearings made of SnBz-12 6-way ram guiding Pneumatic clutch-brake combination 7" touchscreen Pneumatic ram balance Drive gears in oil bath PLC for safety functions Work area safeguarded by light curtain Power ram adjustment Mechanical overload protection Dual-hand and foot pedal operation Adjustable stroke rate (inverter) Automatic central lubrication Machine and equipment in accordance with CE regulations OPTIONS: Vibration pads €192.00 Clamping plate €2,580.00

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €292,500 Punching force: 30 tons Working area: 3000 x 1500 mm X-axis stroke (+ repositioning): 3000 mm Y-axis stroke: 1500 mm X-axis speed: 70 m/min Y-axis speed: 60 m/min Combined X+Y speed: 120 m/min Stroke: 40 mm Max. strokes (1 mm steps, 1 mm sheet thickness): 1200 strokes/min Max. strokes (25 mm steps, 1 mm sheet thickness): 325 strokes/min Max. marking rate: 2800 strokes/min Max. cutting capacity with fixed tool station (St): 6 mm Max. cutting capacity with fixed tool station (Stainless): 3 mm Max. cutting capacity with index station (Steel): 3 mm Max. cutting capacity with index station (Stainless): 1.5 mm Number of stations: 28 Positioning accuracy: 0.1 mm Repeatability: 0.05 mm Tool changer rotation speed: 22 rpm Auto-index rotation speed: 150 rpm Max. workpiece weight: 200 kg Table height: 940 mm Compressed air: 6 bar Max. punching diameter (D-station): 88.9 mm Motor power: 15 kW Oil tank: 180 l Length without light curtains: 6650 mm Length with light curtains: 7650 mm Width without light curtains: 6300 mm Width with light curtains: 8300 mm Height: 2310 mm Weight: 18250 kg CNC control: SIEMENS Sinumerik 840 D SL CAD-CAM software Programming directly on the controller Remote maintenance module 4 clamp claws Automatic positioning of clamps Network connection Automatic tool lubrication Movable scrap container Brush table Oil cooler USB port Foot pedal X-axis repositioning device Adapted tools for D index station Manual nesting Tool changer (28 stations, without tools and holders): 11 x A-station fixed: 0.8–12.7 mm 11 x B-station fixed: 12.8–31.7 mm 2 x C-station fixed: 31.8–50.8 mm 1 x D-station fixed: 50.9–88.9 mm Isdpfx Amjynna Housbb 3 x D-station index: 50.9–88.9 mm Light curtains Equipment according to CE regulations PRICE FCA TURKEY

Stanje: novo, Condition: new Delivery time: approx. 12-14 weeks from order Country of origin: Turkey Price: €249,800 Punching force: 30 t Working area: 2500 x 1250 mm X-axis travel (+ repositioning): 2500 mm Y-axis travel: 1250 mm X-axis speed: 116 m/min Y-axis speed: 80 m/min Combined X+Y speed: 140 m/min Stroke: 40 mm Max. stroke rate (in 1 mm increments, 1 mm sheet thickness): 1200 strokes/min Max. stroke rate (in 25 mm increments, 1 mm sheet thickness): 425 strokes/min Max. stroke rate for marking: 3200 strokes/min Max. cutting capacity with fixed tool station (steel): 6 mm Max. cutting capacity with fixed tool station (stainless steel): 3 mm Max. cutting capacity with index station (steel): 3 mm Max. cutting capacity with index station (stainless steel): 1.5 mm Number of stations: 27 Positioning accuracy: 0.1 mm Repeat accuracy: 0.05 mm Tool changer rotation speed: 22 rpm Auto-index rotation speed: 150 rpm Max. workpiece weight: 120 kg Table height: 940 mm Air pressure: 6 bar Max. punching diameter (D station): 88.9 mm Motor power: 15 kW Length without light barriers: 5750 mm Length with light barriers: 6800 mm Width without light barriers: 5360 mm Width with light barriers: 7360 mm Height: 2310 mm Weight: 12,960 kg CNC control: SIEMENS Sinumerik 840 D SL Iedpjynnayofx Amuebb CAD-CAM software Programming directly on the control unit Remote maintenance module Automatic positioning of the clamps Network connection Automatic tool lubrication UPS for control system Mobile scrap container Brush table Oil cooler USB port Foot pedal Webcam for service Repositioning device for X-axis Custom tools for D index station Manual nesting Tool changer (27 stations without tools and holders): 11 x A-station fixed: 0.8–12.7 mm 11 x B-station fixed: 12.8–31.7 mm 2 x C-station fixed: 31.8–50.8 mm 1 x D-station fixed: 50.9–88.9 mm 3 x D-station index: 50.9–88.9 mm Light barriers Machine and equipment comply with CE regulations PRICE FCA TURKEY

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Ibodeynnatspfx Amujb Country of origin: Turkey Price: €209,800 Leasing rate: €3,371.76 Punching force: 20 tons Working area: 2000 x 1250 mm X-axis travel (+repositioning): 2000 mm Y-axis travel: 1250 mm X-axis speed: 90 m/min Y-axis speed: 70 m/min Combined X+Y speed: 114 m/min Max. stroke rate (1 mm increments, 1 mm sheet thickness): 1100 1/min Max. stroke rate (25 mm increments, 1 mm sheet thickness): 375 1/min Max. stroke rate for marking: 1200 1/min Max. cutting capacity with fixed tool station (steel): 6 mm Max. cutting capacity with fixed tool station (stainless steel): 3 mm Max. cutting capacity with index station (steel): 3 mm Max. cutting capacity with index station (stainless steel): 1.5 mm Number of stations: 27 Positioning accuracy: 0.1 mm Repeatability: 0.05 mm Tool changer rotation speed: 30 rpm Auto-index rotation speed: 150 rpm Max. workpiece weight: 100 kg Table height: 940 mm Air pressure: 6 bar Max. punching diameter (D station): 88.9 mm Motor power: 7.5 kW Length without light barriers: 5600 mm Length with light barriers: 6600 mm Width without light barriers: 4200 mm Width with light barriers: 6200 mm Height: 2310 mm Weight: 11,000 kg CNC control: SIEMENS Sinumerik 840 D SL CAD-CAM software Programming directly at the CNC Remote maintenance module Automatic clamping claw positioning Network interface Automatic tool lubrication UPS for control system Movable scrap container Brush table Oil cooler USB interface Foot pedal Webcam for service X-axis repositioning device Customised tools for C+B index stations Manual "nesting" Tool changer (27 stations, delivered without tools and holders): 11 x A-station fixed: 0.8 – 12.7 mm 10 x B-station fixed: 12.8 – 31.7 mm 2 x B-station index: 12.8 – 31.7 mm 1 x C-station fixed: 31.8 – 50.8 mm 1 x C-station index: 31.8 – 50.8 mm 2 x D-station fixed: 50.9 – 88.9 mm Light barriers Equipment compliant with CE regulations

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €112,813 Leasing rate: €2,132.17 Pressing force: 320 t Bending length: 3050 mm Axes: Y1 / Y2 / X axis Stroke: 365 mm Distance between frames: 2600 mm Throat depth: 450 mm Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y axis: 160 mm/s Working speed Y axis: 10 mm/s Return speed Y axis: 140 mm/s Backgauge speed X axis: 500 mm/s Backgauge speed R axis: 350 mm/s Backgauge travel R axis: 250 mm Table height: 900 mm Table width: 154 mm Oil tank: 250 l Motor power: 37 kW Length: 4300 mm Width: 1820 mm Height: 3330 mm Weight: 17,100 kg Standard equipment: - 3 axes (Y1, Y2, X) - CNC CONTROL DT-15 - 2D graphic display, 15” - Intuitive touch-screen operation (simple drawing of bending contour with finger) - User-friendly dialogue-based programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet cutting - Graphic product and tool storage - Correction options - USB ports for backup and program transfer - PC software for writing programs on PC, then transferring to the machine via USB - Servo motor-driven backgauge on linear guides and ball screws - Backgauge finger blocks on double linear guides - CNC-controlled crowning - Top tool 1010/A/75°, segmented and gooseneck - 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) - Fiessler AKAS laser safety device mounted on upper beam - Sheet support arms on linear guide - Equipment in accordance with CE regulations - Oil filling - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S: - Increased stroke, installation height and throat depth - Higher approach and return speeds of upper beam - Higher backgauge speed - Backgauge fingers on double rather than single linear guides - More options available, e.g.: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem configuration, other CNC controls, etc. Options: - R axis - R/Z1/Z2 axes - DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) Ibodewirbfepfx Amueb - CNC control SKY22 - CNC control Delem DA66 S - CNC control DELEM DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Stanje novo Rok isporuke cca. 12-14 nedelja od porudžbine Zemlja porekla Slovačka Isdpfx Ameynm A Tjujbb Cena 28.300 € Leasing rata 540,53 € Pritisna snaga 40 t Dužina savijanja 2000 mm Ose X i Y osa Hod 100 mm Ugradbena visina 310 mm Pogonski koncept hidraulični Rezervoar za ulje 38 l Motor 6 kW Dužina 2500 mm Širina 1200 mm Visina 1900 mm Težina 2100 kg Zadnji graničnik 420 mm Matrica 1 Brzina 10 mm/s Brzina povlačenja 12 mm/s Brzina zadnjeg graničnika 40 mm/s Preciznost pritisne grede +/-0,02 mm Preciznost zadnjeg graničnika +/-0,05 mm 2 ose (Y i X) Motorni zadnji graničnik sa tasterom i ručnim finim podešavanjem sa brojačem Dubina presovanja Y i gornja mrtva tačka preko kontrolera za predizbor Međuprsten sa polugom za brzo stezanje za stezanje gornjeg alata Gornji alat 1010/75/R0,8/105 1x835 mm + 1x835 mm podeljeno Matrica 2009/85° (V16/22/35/50 mm) 1x835 mm + 1x835 mm podeljeno 2 ruke za podupiranje lima Oprema u skladu sa CE normama Ulje uključeno Uputstvo za upotrebu na nemačkom

Stanje: novo, Condition: New Delivery time: Approx. 10 weeks from order Country of origin: Turkey Price: €63,320 Leasing rate: €1,196.75 Press force: 100 tons Bending length: 2,550 mm Axes: Y1 / Y2 / X axis Stroke: 265 mm Distance between uprights: 2,200 mm Side frame throat depth: 450 mm Installation height: 530 mm Drive concept: Hydraulic Rapid traverse (Y-axis): 180 mm/s Working speed (Y-axis): 10 mm/s Return speed (Y-axis): 120 mm/s Backgauge speed (X-axis): 500 mm/s Backgauge speed (R-axis): 350 mm/s Backgauge travel (R-axis): 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 100 l Motor power: 11 kW Length: 3,800 mm Width: 1,670 mm Height: 2,850 mm Weight: 7,800 kg 3 axes (Y1, Y2, X) CNC CONTROL DT-15 - 15” 2D graphic display - Intuitive touch-screen operation (easy contour drawing with finger) - User-friendly dialog programming - Automatic calculation of bending sequences - Automatic calculation of the flat length for sheet blank - Graphic product and tool memory - Correction capability - USB ports for backup and program export Ijdpfxewiqmge Amujbb - PC software for program creation on PC and transfer to the machine via USB Servo-driven backgauge on linear guides and ball screw spindles Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and gooseneck 4-V die block 60x60 2009 (V= 16, 22, 35 and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guide Equipment complies with CE regulations Oil fill included Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S SERIES: - Greater stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Higher backgauge speed - Backgauge fingers on double rather than single linear guides - Increased options available, e.g., additional backgauge axes (Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem operation, alternative CNC controls, etc. Options: - R-axis - R/Z1/Z2 axes - DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) - CNC control SKY22 - CNC control Delem DA66S - CNC control DELEM DA-69S 3D incl. Profile-S PC software with 3D file import capability - Quick-release lever for upper tool

Stanje: novo, Condition: new Delivery time: approx. 14–16 weeks from order Country of origin: Turkey Price: €28,800 Leasing rate: €550.08 Press force: 20 t Nominal press force at 1.7 mm Table length: 360 mm Table width: 550 mm Pass-through hole in table: 140 mm Stroke length: 1–50 mm Strokes per minute: 160 1/min Ram guides: 4 Ram adjustment: 40 mm Ram bore: 35 mm Throat depth: 200 mm Installation height: 240 mm Motor: 2.2 kW Length: 1,360 mm Width: 1,100 mm Height: 1,860 mm Weight: 1,250 kg Welded steel frame construction 4-way ram guide Pneumatic clutch/brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Setup mode * Two-hand actuation * Foot actuation Ibsdpfjwiry Usx Amujb * 2-cycle operation via light barriers * Continuous operation Touchscreen for: * Stroke counter with preset for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor rotation direction * Monitoring of inputs and outputs 2 free cams for peripheral connection Automatic central lubrication Equipment according to CE regulations OPTION: Vibration pads €132,--

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €58,200 Leasing rate: €1,099.98 Pressing force: 80 t Nominal pressing force at 4 mm Table length: 600 mm Table width: 900 mm Through-hole in table: 200 mm Stroke: 1 - 110 mm Strokes per minute: 60 Ram guides: 6 Ram adjustment: 80 mm Ram bore: 50 mm Throat depth: 300 mm Installation height: 400 mm Motor: 7.5 kW Length: 1600 mm Width: 1500 mm Height: 2750 mm Weight: 5,700 kg Welded steel frame construction 6-way ram guide Pneumatic clutch-brake combination Safety enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency inverter Operating modes: * Setup mode * Two-hand activation * Foot pedal activation * 2-cycle operation via light barriers * Continuous operation Touchscreen for: * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor rotation direction * Monitoring of inputs and outputs 2 free cams for connecting peripheral devices Automatic central lubrication Equipment in accordance with CE regulations (Sample images) Ibedpswiq I Dofx Amusb OPTIONS: Vibration pads: €192.00 T-slot plate: on request Hydraulic overload protection: on request etc.

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Iedpfxoynmyfo Amusbb Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity – mild steel: 10 mm Max. plate thickness without pre-bending (at D = 5x top roll): 10 mm Max. plate thickness without pre-bending (at D = 1.5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 1.5x top roll): 6 mm Top roll diameter: 200 – 220 mm Lower roll diameter: 200 – 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gears and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be a maximum of 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €127,400 Leasing rate: €2,407.86 Pressing force: 220 tons Bending length: 4050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 3600 mm Throat depth: 410 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 12 mm/s Return speed Y-axis: 180 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Length: 5250 mm Width: 1770 mm Height: 2900 mm Weight: 15,000 kg ONE SERVO MOTOR AND PUMP PER CYLINDER Standard equipment: - 4 axes (Y1, Y2, X, and R) - CNC control unit SKY 22 - Full HD graphic display 21.5” with 2D and 3D representation of the programed workpiece - Intuitive touchscreen operation (easy drawing of the bending contour with finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet cutting - Automatic calculation of bending sequences - Graphic product and tool memory - Correction option - USB ports and Ethernet connection for import, backup, and program export - Windows operating system - Import support for IGES, STEP, and DXF files - Servo-driven backgauge on linear guides and recirculating ball screws - Backgauge finger blocks on double linear guides - CNC-controlled crowning - Top tool 1010/A/75°, segmented and offset - 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS mounted on the upper beam - Sheet support arms on linear guides - Equipment complies with CE regulations - Oil filling Ijdeynm Amopfx Amujbb - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics run only during upper beam movement - Low energy consumption - Low noise emissions - High speed Options: - Z1/Z2 axes - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick-clamping lever for the upper tool

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €103,100 Leasing rate: €1,948.59 Bending length: 2550 mm Max. bending capacity – structural steel: 25 mm Max. sheet thickness without prebending at D=5x top roll: 25 mm Max. sheet thickness without prebending at D=1.5x top roll: 20 mm Max. sheet thickness with prebending at D=5x top roll: 20 mm Max. sheet thickness with prebending at D=1.5x top roll: 16 mm Top roll diameter: 350 mm Bottom roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5500 mm Width: 2000 mm Height: 1900 mm Weight: 13,000 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Movable control panel Ibjdpeynm Eusfx Amujb Equipment according to CE regulations OPTIONS: Infinitely adjustable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The maximum sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Stanje: novo Dobavni rok: približno 3-6 tednov po naročilu Iedpfx Aeynnb Domujbb Država izvora: Turčija Cena: 130.600 € Leasing obrok: 2.468,34 € Pritisna sila: 200 t Dolžina mize: 1.200 mm Širina mize: 740 mm Prehodna odprtina v mizi: 220 mm Hod: 24 - 140 mm Število hodov: 50 1/min Tlačilo: 950 x 600 mm Nastavitev tlačila: 100 mm Globina: 390 mm Motor: 15 kW Dolžina: 2.350 mm Širina: 1.700 mm Višina: 3.435 mm Teža: 14.900 kg 8-točkovno vodilo tlačila Sprednje varovalo z varnostno svetlobno zaveso Motorizirana nastavitev tlačila Hidravlična zaščita pred preobremenitvijo Avtomatsko mazanje Oprema v skladu s CE direktivami Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €15,900 Lease rate: €305.28 Shaft diameter: 50 - 60 mm Top roller diameter: 180 mm Roller diameter: 180 mm Lower roller diameter: 180 mm Driven rollers: 3 Motor power: 3.75 kW Speed: 6 m/min Flat bar upright (cross-section / min. diameter): 60x10 mm / 500 mm; 20x5 mm Flat bar flat (cross-section / min. diameter): 80x20 mm / 500 mm; 50x5 mm Square bar (cross-section / min. diameter): 32x32 mm / 400 mm; 12x12 mm Iodpjyn R E Ssfx Amujbb Round bar (cross-section / min. diameter): Ø 35 mm / 350 mm; Ø 10 mm Tube (cross-section / min. diameter): Ø 60x2 mm / 600 mm; Ø 15 mm Rectangular tube upright (cross-section / min. diameter): 50x25x3 mm / 450 mm; 20x1 mm Square tube (cross-section / min. diameter): 45x3 mm / 600 mm; 20x2 mm Angle iron legs out (cross-section / min. diameter): 60x60x6 mm / 650 mm; 30x3 mm Angle iron legs in (cross-section / min. diameter): 50x50x5 mm / 550 mm; 30x3 mm UPN legs out (cross-section / min. diameter): UPN 80 / 600 mm; UPN 30 / ... UPN legs in (cross-section / min. diameter): UPN 65 / 600 mm; UPN 30 / ... IPN flat (cross-section / min. diameter): IPN 80 / 600 mm Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of the two lower rollers Hardened universal rollers Lateral straightening rollers, manually adjustable in 3 axes Usable in horizontal and vertical position Digital display for lower roller positions Machine and equipment compliant with CE regulations Operating manual in GERMAN and ENGLISH

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Ibodpfx Aoypbqbjmujb Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Ibedjypbqnopfx Amueb Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Stanje novo Dobavni rok približno 12 tednov po naročilu Država izvora Turčija Cena 13.200 € Leasing obrok 253,44 € Tlačna sila 100 t Valj fiksni ali vodoravno premičen Hod 300 mm Svetla širina stojala 1570 mm Premer bata 220x160 mm Ijdpfx Aoypbtiomuobb Delovna hitrost 5 mm/s Hitrost povratka 10 mm/s Dolžina 2560 mm Širina 1000 mm Višina 2480 mm Teža 1755 kg Z ročnim kolesom vodoravno premičen valj Jeklena varjena konstrukcija Poljubna ustavitvena pozicija Merilnik tlaka Varnostni ventil proti preobremenitvi 2 V prizmi Miza nastavljiva po višini Naprava za dvig/spust mize Upravljanje z ročico Oprema v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Condition: new Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €48,500 Leasing rate: €926.35 Press force: 60 tons Nominal press force at 3.5 mm Table length: 500 mm Table width: 700 mm Through-hole in table: 190 mm Stroke: 1 - 100 mm Strokes per minute: 65 Ram guides: 4 Ram adjustment: 70 mm Ram bore: 45 mm Throat depth: 260 mm Installation height: 340 mm Motor: 5.5 kW Length: 1250 mm Width: 1350 mm Height: 2400 mm Weight: 3500 kg Welded steel frame construction 4-fold ram guidance Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Operating modes: * Setup mode * Two-hand release * Foot release * 2-cycle operation via light barriers * Continuous operation automatic central lubrication Equipment according to CE regulations OPTIONS: Vibration pads Clamping plate Iedpfowwwtisx Amuobb

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Ibsdpfeyb Sz Iex Amusb Price: €55,900 Leasing rate: €1,056.51 Bending length: 3,100 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roller: 8 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 7 mm Max. sheet thickness with pre-bending at D=5x top roller: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 5 mm Top roller diameter: 245 mm Bottom roller diameter: 245 mm Side roller diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,850 kg 4 rollers Top roller drive via hydromotor and planetary gearbox, bottom roller drive via gear and cardan shaft Hydraulic adjustment of bottom and side rollers Digital readout for bottom and side roller positions Hardened rollers Cone bending device Hydraulic relief for top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel CE-compliant equipment OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €21,900 Leasing rate: €420.48 Press force: 80 t Iodpfewiqrcjx Amuebb Stroke: 285 mm Max. bending capacity – structural steel: 300x25 mm Table: 750x1425 mm Pin height: 300 mm Pin diameter: 105 mm Working speed: 10 mm/s Return speed: 10 mm/s Motor: 10 kW Working height: 930 mm Length: 1430 mm Width: 750 mm Height: 1450 mm Weight: 1,700 kg Stroke adjustment with digital readout Manual and automatic operating modes Bolts and tools hardened and ground Press brake tool Foot pedal OPTIONS: Shearing, punching, or tube bending tools available on request

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 090132 Delivery time: immediate, subject to prior sale Country of origin: Turkey Ibjdewiqyyepfx Amueb Price: €47,500 Leasing rate: €798.38 In stock: 1 Special price: €41,800 Cutting length: 3100 mm Max. sheet thickness – mild steel: 6 mm Max. sheet thickness – stainless steel: 4 mm Side frame throat: 50 mm Strokes per minute: 15 Cutting angle: 1.5° Number of hold-downs: 16 Hold-down pressure: 14 t Backgauge: 1000 mm Backgauge speed: 200 mm/s Motor power: 15 kW Hydraulic tank: 200 l Support arms: 2 pcs Table height: 865 mm Table width: 500 mm Table length: 3515 mm Overall length: 4110 mm Width: 2200 mm Total width with support arm and rear guard: 3700 mm Height: 2100 mm Weight: 7300 kg Swing beam shear design NC pre-selection control D-Touch 7 with touch screen for backgauge, cutting length, piece count, and USB interface Motorized backgauge, adjustable up to 1,000 mm with ball screws, can be lifted up Clearly arranged operator panel mounted on swiveling arm Hydraulic hold-downs positioned close to the cutting line Foot pedal Central manual blade gap adjustment Cutting line illumination Wide support table with ball transfers Piece counter Single and continuous stroke Folding finger guard 1,000 mm 1 side fence 1,500 mm with scale, T-slot, and cam stop 2 sheet support arms 1,000 mm with T-slot Easy blade change and re-sharpening Adjustable cutting length for economical processing Lower blade with four cutting edges, reversible Upper blade with two cutting edges, reversible Filled with oil Light barriers at the rear of the machine Qualified customer service Operating manual in GERMAN and ENGLISH Equipment in accordance with CE standards WE HAVE MORE THAN 850 REFERENCES!

Stanje: novo, Stanje: novo Rok dobave: cca. 10 tednov po naročilu Ibedpfx Aswiqy Temujb Država izvora: Turčija Cena: 74.100 € Leasing obrok: 1.400,49 € Tlačna sila: 100 t Hod: 300 mm Tlačnik: 600 x 900 mm Miza: 700 x 1.100 mm Vgradna višina: 550 mm Hitri pomik: 100 mm/s Delovna hitrost: 8,5 mm/s Hitrost povratka: 165 mm/s Motor: 11 kW Dolžina: 2.100 mm Širina: 2.050 mm Višina: 3.050 mm Teža: 6.500 kg 4-točkovno vodilo tlačnika Miza in tlačnik z utori v obliki črke T Ročna nastavitev hoda s pomočjo rotacijskega stikala Ročni in avtomatski način delovanja Svetlobne zavese Oprema v skladu s predpisi CE

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 090131 Ibsdpfx Aewiq S Ajmuob Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €4,700 Leasing rate: €109.71 In stock: 1 unit Shaft diameter: 50 mm Roller diameter: 155 mm Driven rollers: 2 Motor power: 1.5 kW Speed: 4.5 m/min Flat bar upright (cross-section / min. diameter): 60x10 mm / 500 mm; 40x10 mm Flat bar flat (cross-section / min. diameter): 100x15 mm / 450 mm; 60x15 mm Square bar (cross-section / min. diameter): 35x35 mm / 900 mm; 20x20 mm Round bar (cross-section / min. diameter): Ø 35 mm / 600 mm; Ø 30 mm Tube (cross-section / min. diameter): Ø 70x2 mm / 1,000 mm; Ø 30x2 mm Rectangular tube upright (cross-section / min. diameter): 70x30x2 mm / 1,200 mm; 50x30x2 mm Square tube (cross-section / min. diameter): 50x50x3 mm / 1,700 mm; 40x40x3 mm Angle iron legs outside (cross-section / min. diameter): 50x50x5 mm / 800 mm; 40x40x4 mm Angle iron legs inside (cross-section / min. diameter): 50x50x6 mm / 1,000 mm; 30x30x4 mm Length: 1,050 mm Width: 750 mm Height: 1,450 mm Weight: 390 kg 2 mechanically driven rollers Robust cast steel construction Shafts made from hardened and ground special steel Manual adjustment of top roller Hardened universal rollers Side straightening rollers manually adjustable on one axis Can be used horizontally and vertically Foot pedal for forward and reverse drive Machine and equipment in compliance with CE regulations Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!