Harwi Vertikalna Ploščna Žaga Harwi Piranha 1250 2021 nakup rabljenega (7.330)

Stanje: rabljeno, Leto izdelave: 2007, 1 kos kotne žage KALTENBACH TL450 z dvema valjčnima progama, vsaka približno 200x47x120 cm. Barva: kot je prikazano na slikah in ob ogledu. Leto izdelave: 2007. Stanje: rabljeno. Skladišče blaga: skladiščna hala Kdsdpfxoy D Ncis Al Nok Način plačila: predplačilo z bančnim nakazilom Dostava: samo osebni prevzem na lokaciji Ditzingen-Heimerdingen

Stanje: rabljeno, 1 kos kotna žaga EISELE VMSA-LO Napetost 380 V, na paleti Barva: kot prikazano na slikah in ogledu Kdjdpfx Aley D Nbxs Njk Stanje: rabljeno Skladiščna lokacija blaga: skladišče Način plačila: predplačilo z bančnim nakazilom Dostava: samo osebni prevzem na lokaciji Ditzingen-Heimerdingen

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler model MG 50 T.V.E. 1200x1100x3500h for the compaction and formation of bales of soft waste materials, such as glass wool mats or similar. The MG 50 T.E. model features a fully enclosed compaction chamber; both the material loading door and bale extraction door can be opened. The electrical control panel is mounted on the side with integrated controls and comes with a 10 m extension cable, allowing it to be positioned away from the baler. The press plate is operated by a single cylinder with a 2700 mm stroke and is guided by 4 lateral sliding rails. Material is loaded from the front. The compaction cycle (downward and upward movement of the press) is automatic, operated by push button. - For transport, the machine is constructed in three sections: one of 2000 mm height, one around 2300 mm, and the cylinder, which will be assembled onsite. - Bale tying is preset-type, performed with the doors open, and is done manually; tying can be done with standard pre-cut wire or strapping through slots at the rear of the chamber. - Bale extraction is carried out using a forklift; dedicated channels at the base allow the forklift tines to be inserted. - The bale extraction door is closed via a handwheel, ensuring safe opening even with highly elastic materials; a microswitch ensures the door is securely closed before pressing. The upper door is equipped with a hydraulic lever closure with controls on the machine. - Can be installed against a wall; requires front access only for material loading and bale extraction. - The hydraulic circuit features a safety lock valve to prevent press plate descent. - The machine must be fixed to the ground and is positioned over a wash liquid collection tray. • Manufacturer / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Material pressing pressure: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: 1250 x 1150 mm, variable height (min 800, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Pressing chamber: 1200 x 1100 x 3500 mm • Loading opening: 1200 x 1800 mm • Ram stroke: 2700 mm, single extension • Operation: Automatic, push button • Cycle time (automatic): 130 seconds • Manual ties: 5 • Bale ejection: Removed with forklift • Hydraulic unit: Integrated in press Kdsdpjyzr Nmofx Al Njk • Motor power: 10 Hp (7.5 kW) • Supply voltage: 380V, 50 Hz • Overall dimensions: 2000 x 3500 x 7150 mm • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used vertical hydraulic baler, in excellent condition, sold as seen and approved.

Stanje: rabljeno, Leto izdelave: 1990, moč: 5,5 kW (7,48 KM), največja višina reza: 105 mm, največja širina rezanja: 1.250 mm, premer žaginega lista: 350 mm, vrsta nastavitve višine: hidravlični, največja hitrost vrtenja: 6.000 obr/min, vrtljajska hitrost (min.): 3.000 obr/min, skupna dolžina: 3.300 mm, skupna širina: 2.000 mm, skupna višina: 1.600 mm, skupna masa: 800 kg, Oprema: dozator, No. 04510 Altendorf F 45 Sliding Table Saw Used, Year of manufacture: 1990 Sliding table length: 3200 mm Max. cutting height: 105 mm Max. saw blade diameter: 350 mm Kodpey A Npgefx Al Nedk Cutting width: 1250 mm Main motor: 5.5 kW Speeds: 3000 / 4000 / 5000 / 6000 rpm Scoring unit Hydraulic saw blade tilt Hydraulic cutting height adjustment New hydraulic cylinder for cutting height adjustment (365,- € plus VAT) Main saw motor brake defective Transport dimensions approx. 3300 x 2000 x 1600 mm (L x W x H) Weight approx. 800 kg To avoid possible misunderstandings, inspection on site by prior arrangement is possible and recommended. Sale in as-is condition Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded. Sold as seen. Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex stock

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Na prodaj je industrijska verižna žaga PRINZ ECOSTAR v zelo dobrem stanju. Stroj je bil zelo malo uporabljen in je tehnično ter vizualno odlično ohranjen. 📋 Tehnični podatki: Proizvajalec: PRINZ Kettensägetechnik Tip: ECOSTAR Letnik: 2016 Moč: 7,5 kW Napetost: 3x 400 Volt Hitrost: 2910 obr/min Teža: ca. 172 kg ✅ Opis: Idealno za obdelavo lesa, mizarje ali industrijsko uporabo Odlično za razrez lesnih paketov, desk ali skladov plošč Zelo malo uporabljena – skoraj brez obrabe Robustna in dolgotrajna industrijska kakovost PRINZ Takoj pripravljena za uporabo Kdjdpfx Aljy Atpwj Njk

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Rabljena avtomatska tračna žaga MEP Shark 332 nc 5.0 Dimenzije lista: 3320x27x0,9mm Kot reza od: -45° do +60° Kdodpjxz Ulbofx Al Nsk Rezalna hitrost lista: od 15 - 100m/min Kapciteta reza pri 0°: - okroglo 300mm - kvadrat 260mm - pravokotnik 330x260mm Štirje načini delovanja: ročno , polavtomatsko dinamično, polavtomatsko in avtomatsko Leto izdelave: 2017 Teža stroja: 1150kg Dodatna oprema: - poseben primež za zmanjšanje ostankov - KIT IoT Industry 4,0 Ready Stroj je kot nov. Ima samo 515 delovnih ur.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Rabljena avtomatska tračna žaga za kovino MEP SHARK 282 nc evo Leto izdelave: 2011 Kdedpfx Alsykvg Hj Nok Dimenzije lista: 2950x27x0,9mm Kot reza: od -45° do +60° Štirje načini delovanja: ročno, polavtomatsko dinamično, polavtomatsko in avtomatsko Rezalna hitrost rezila: od 15 do 100m/min Kapciteta reza pri 0°: - okroglo 250mm - kvadrat 220mm - pravokotnik 280x220mm Teža stroja: 980kg Stroj je v celoti obnovljen.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 520 mm, CNC-controlled double-head mitre circular saw machine with electronic saw unit swiveling A high-performance circular saw designed for precise and efficient cutting of aluminium profiles, non-ferrous metals, and various plastics. The machine can be used for single cuts—utilizing both saw heads simultaneously to cut the profile—or in automatic mode, where the double-head saw functions as a single-head saw automaton. Electronic mitre adjustment of the saw heads. Mitre angles infinitely programmable between 20° and 135°. Kodpfx Aljy Afvij Njdk Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Max. cutting length with both saw heads simultaneously: 4,000 mm or 5,000 mm Max./min. cutting length in automatic mode: unlimited (the profile is pushed and pulled) Length of infeed roller conveyor: 2,300 mm Maximum required floor space: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with touch-screen and color graphics on a movable operator panel - Import and export of CSV / LTE files (for loading cutting lists from an external CAD software) - Graphical profile display Optionally equipped with a label printer.

Stanje: rabljeno, prevoženi kilometri: 432.377 km, moč: 207 kW (281,44 KM), prva registracija: 11/2018, vrsta goriva: dizel, lastna masa: 9.280 kg, največja dovoljena obremenitev: 8.645 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, medosna razdalja: 5.670 mm, zavore: zaviranje z motorjem, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, Oprema: ABS, centralno zaklepanje, klimatska naprava, računalnik na krovu, registracija tovornjaka, tempomat, zapora diferenciala, zavorni sistem na stisnjen zrak, Iveco Eurocargo 4x2 hladilni zabojnik Carrier Supra 1250, Euro6 | Dvižna ploščad BÄR 1500 kg | Listno-zračno vzmetenje | Vlečna kljuka | Večfunkcijski volan, klima, parkirno gretje | Tempomat, radio/CD | Dimenzije nakladalnega prostora D: 7,50 m, Š: 2,45 m, V: 2,30 m | Pridržujemo si pravico do napak, sprememb in predhodne prodaje. Kjdpeyyb Ayjfx Al Njdk

Stanje: dober (rabljeno), Leto izdelave: 2001, Plage de coupe (matériau rond max.): env. 350 mm Longueur de lame : ~3 380 mm Largeur de lame : bandes typiques 27–34 mm Vitesse de lame : réglable, plage typique 20–120 m/min (plusieurs paliers ou en continu, selon la variante) Avance : avance contrôlée hydrauliquement avec réglage de la force et de la vitesse d’avance Groupe hydraulique : intégré, avec régulation de pression pour le mouvement de la tête et l’étau Mors de serrage (étau) : fermeture hydraulique, fonction immobilisation/verrouillage Lubrifiant réfrigérant : pompe avec buse(s), raccords pour circuit de refroidissement Kdodpfx Aloy Afnxe Nsk Commande : semi-automatique / automatique (AFI-E = unité d’avance automatique, non CN), panneau opérateur simple avec boutons-poussoirs Équipement de sécurité : capots de protection sur la lame, arrêt d’urgence, carters métalliques, fins de course de sécurité pour les capots

Stanje: rabljeno, Leto izdelave: 1971, Roller diameter: 300 mm Throat depth: 450 mm Table height: 480 mm Saw band length: 3350 mm Saw band width: 10 mm Total power requirement: 2.2 kW Machine weight: approx. 520 kg Space requirement: approx. 1.00 x 0.70 x 1.85 m Kedpfx Aswhqtdjl Nodk Saw for bodywork parts made of sheet metal, plastic, etc. Good accessibility to the saw band, suitable for freehand operation. Cutting speed steplessly adjustable up to 1000 m/min Bandsaw welding unit: IDEAL BS00

Stanje: rabljeno, Leto izdelave: 1994, Altendorf F45 elmo Drsna miza 3200 mm Kjdpfx Aljy Agque Nedk Predrezalna enota Električno nagibanje in dvigovanje z joystickom Duplex kotni prislon Nagib in nastavitev višine žaginega lista nastavljiva električno Paralelni prislon ročno nastavljiv, širina reza 1350 mm Motor 5,5 kW 4 hitrosti rezanja nastavljive preko jermena Letnik 1994 Stroj je še v pripravi in se preverja za delovanje Cena 6200,- z garancijo na delovanje

Stanje: dober (rabljeno), Leto izdelave: 1996, Območje reza min. 250 - 2200 mm Premer žaginega lista 250 x 20 mm Območje reza 50 x 70 mm Kotna reza – obojestransko 90 in 45 ° Skupna potrebna moč 2 x 1,1 kW Teža stroja cca. 0,42 t Prostorske zahteve cca. 2,94 x 1,15 x 1,22 m Vključno s pozicionirnim krmiljenjem Vključno z elektronskim merilnim trakom Stroj smo priključili, a ga žal nismo mogli upravljati, ker nismo seznanjeni s to vrsto stroja. Cevke je treba zamenjati, saj iz nekaterih izteka zrak. Kdodpfx Aley Aa R Ie Nek Vabljeni, da si stroj ogledate na lokaciji.

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 117004, skupna dolžina: 7.500 mm, skupna širina: 1.200 mm, skupna višina: 2.000 mm, skupna masa: 2.500 kg, KALTENBACH SKL 400 H Cold Circular Saw (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade bore: 50/4 x 14/80 mm - Working range round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles horizontal 45°: 220 x 60 mm - Profiles vertical 45°: 80 x 120 mm Kdsdpoy Dcu Ejfx Al Nsk - Saw motor: 3.7/4.5 kW - Cutting speed: 1750/3500 m/min - Saw blade feed rate: 0 - 3700 mm/min - Rapid return of saw blade: 4500 mm/min Additional equipment: - Workpiece clamping with short-stroke clamping vice: 8 mm stroke - With handwheel for preadjustment - Machine fully overhauled and repainted - Horizontal clamping cylinder front, per piece - Minimal lubrication instead of coolant mist spraying unit - Infeed roller conveyor T3 with 60 x 289 mm rollers - One starter section: 2000 mm, with 5 rollers, one support leg, one connection bracket - One extension section: 2000 mm, with 4 rollers, one support leg, one stop roller, adjustable as guide for material bars - Measuring device including outfeed roller conveyor T3 Note: The item must be collected bindingly between 07 and 09 July 2026 at a time still to be agreed. FCA D-71263 Weil der Stadt – loaded onto truck

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 313026, premer žaginega lista: 450 mm, skupna dolžina: 10.000 mm, skupna višina: 2.000 mm, skupna širina: 1.200 mm, skupna masa: 2.000 kg, KALTENBACH SKL 450 H polavtomatska hladno krožna žaga Kdedpey Dcr Dsfx Al Njk - Obratovalna napetost: 3 x 400 V - Frekvenca: 50 Hz - vklj. z valjčnimi progami Pozor: Izdelek mora biti obvezno prevzet med 07. in 09.07.2026 ob dogovorjenem terminu. FCA D-71263 Weil der Stadt – naloženo na tovornjak

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 119349, premer žaginega lista: 450 mm, skupna dolžina: 12.000 mm, skupna višina: 2.000 mm, skupna širina: 1.200 mm, skupna masa: 1.500 kg, KALTENBACH SKL 450 H hladna krožna žaga (splošno obnovljena) - Premer žaginega lista: 400/450 mm - Nosilec žaginega lista: 50/4 x 14/80 - Obseg obdelave okroglega materiala 90°: 135/160 mm - Kvadrat 90°: 125/145 mm - Profili 90°: 300 x 40 mm / 320 x 50 mm - Profili ležeči 45°: 220 x 60 mm / 250 x 40 mm - Profili stoječi 45°: 60 x 130 mm / 100 x 150 mm Kdedpfey Dcrwsx Al Nok - Motor žage: 3,7/4,7 kW - Hitrost rezanja: 1950/3900 m/min - Dovodna valjčna proga T3, odvodna valjčna proga T3 z merilcem dolžine L45E, en začetni kos: 2000 mm, horizontalni vpenjalni sistem SKL 450 Pozor: Stroj je bil splošno obnovljen! Pozor: Artikel je treba med 07. in 09.07.2026 na dogovorjen datum obvezno prevzeti. FCA D-71263 Weil der Stadt – naloženo na tovornjak.

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MV-117894/D, premer žaginega lista: 400 mm, skupna dolžina: 8.000 mm, skupna višina: 1.900 mm, skupna širina: 1.000 mm, skupna masa: 1.000 kg, KALTENBACH SKL 400 EC-H Automate de sciage circulaire à froid (entièrement révisée) - Largeur de coupe max. : 4 mm - Alésage de la lame de scie : 50 mm - Nombre de vis de fixation : 4 pcs - Cercle primitif des vis de fixation : 80 mm - Vitesse d’avance de la lame : 0 - 3 000 mm/min - Retour rapide : 4 500 mm/min - Course de réglage de la butée de pièce : 70 mm derrière et 40 mm devant le point zéro biométrique = 110 mm - Plateau rotatif, réglage manuel en continu : 90° Kodpfey Dcqyjx Al Nodk Il s'agit d'une machine entièrement révisée. Exécution : Système de dosage MS-2 C, convoyeur à rouleaux d’alimentation T3 : 4 m, convoyeur à rouleaux d’alimentation T3, convoyeur à rouleaux de sortie T3 avec dispositif de mesure de longueur L45D Attention : L'article doit être enlevé obligatoirement entre le 07 et le 09/07/2026 à une date à convenir. FCA D-71263 Weil der Stadt – chargée sur camion

Stanje: delavnici obnovljeno (rabljeno), reinforced cast iron table, tiltable balanced cast iron flywheels precise upper & lower blade guides Kdjdjv Dg A Uepfx Al Njk Table dimensions approx. 680 x 580 mm Cast iron flywheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Stanje: novo, Tilting Spindle Moulder Ksdpfx Aocuwptel Njdk Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 1994, Dolžina reza 5300 mm, višina reza 2200 mm, višina reza 80 mm, ročni podajalnik, merilni sistem: skala, samostoječa podpora, nazivni tok 21 A. Lokacija skladiščenja: dobavitelj. Kdsdpsytrhrjfx Al Nek

Stanje: novo, Altendorf F 35 Typ 1 - 1000 Formátovací pila Robustní, výkonná, vysoká výška řezu – ideální pro masivní dřevo! - Nový stroj – ihned k dodání - Výkon motoru 7,5 kW, 400 V, 50 Hz, 3 rychlosti Kjdpfxextbtpe Al Nodk Motorické nastavení výšky a úhlu Velký ochranný kryt Dvojitý válečkový vozík 3 200 mm Příprava pro předřez Podélný doraz, šířka řezu 1 000 mm Úhlový a pokosový doraz 3 450 mm, bez délkové kompenzace Prodlužovací/rozšiřující díly stolu: práškově lakovaný povrch Rozsah naklápění pilového kotouče: 0 - 46° Délka vozíku: 3 200 mm Délka řezu: 3 100 mm Šířka řezu: 1 000 mm Výška řezu: 154 mm Max. průměr pilového kotouče: 450 mm Velikost obrazovky: 15 palců Pracovní výška stolu: 910 mm Průměr odsávacího hrdla: 80 + 120 mm Včetně příslušenství: M45102 podélný doraz 1 000 mm Digit_X M64300 přední opěrný váleček M99008 držák vzorků

Stanje: novo, Technical Data: Deflection pulley diameter: 800 mm Max. cutting height: 400 mm Max. cutting width: 780 mm Table dimensions: 580 x 810 mm Tilting table up to 15 degrees Max. blade width: 80 x 0.8 mm Saw blade length: 5380 - 5530 mm Motor: 11.0 kW, 400 V, 50 Hz Extraction diameter: 2 x 100 mm Wheel speed: 680 rpm Extraction connection: 1 x Ø 100 mm & 2 x Ø 120 mm Compressed air connection: 6 - 8 bar Machine weight: approx. 850 kg Machine dimensions (L x W x H): 1550 x 950 x 2500 mm Features: - Welded steel frame, fully enclosed - Pneumatic brake - Support table made of ground and grooved cast iron - Upper and lower blade guide with interchangeable inserts - Star-delta switch - Emergency stop button on the main control panel - Cutting height 600 mm - Telescopic blade guard - Cast table tiltable by 20° - Saw blade cleaning unit with diesel tank - Fence with millimeter scale and magnifier - Blade tension indicator - Doors with key lock - Cleaning brush on the deflection pulleys - Width stop can be used on both sides, cast iron Kdedpfjby U Dpjx Al Nek - Cast iron deflection pulleys, rubber-coated, balanced - Motor protection switch - CE compliant version CENTAURO Model RVP200 Feed roller height: 160 mm Counterpressure roller stop height: 160 mm Variable feed speed: 1 - 21 m/min Pneumatic opening/closing of the feed Max. distance saw blade – feed approx. 220 mm Max. distance saw blade – counterpressure roller stop approx. 200 mm CE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, 3-axis controlled panel saw with parallelogram support table Kdedpfx Alsyftzke Njk Swiveling control panel above the table Data input via membrane keypad Electronic adjustment of the scorer unit Automatic rip fence with adjustment via lead screw and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis, with fine adjustment. Angle detection system via magnetic strip and LCD display. Crosscut fence with 3 LCD displays Extendable support table with roller support Technical data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scorer blade diameter mm: 120 Panel cuts with extendable stop mm: 3200x3200 Saw blade tilt range degrees: 0° / +46° Max. saw blade cutting height at 90° mm: 150 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scorer speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scorer unit power Hz 50 kW: 0.75 Cutting width with rip fence mm: 1270 Weight approx. 1180 kg Used machinery notice: • Technical data subject to errors and prior sale. • Prices quoted are ex-location, free loading! • The machine has been cleaned and function-tested. • All machines are purchased as inspected, with no warranty claims whatsoever. Buyers are invited to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address & telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Pritisk: 25 t Dolžina krivljenja: 1250 mm Razmak med stojali: 1200 mm Krmljenje: Cybelec CybTouch 12 Hod: 150 mm Vgradna višina: 340 mm Hitrost hitrega spusta: 220 mm/s Hitrost krivljenja: 0-12 mm/s Skupna potrebna moč: 5,5 kW Teža stroja cca: 2.500 kg Mere: 1980 x 1170 x 2185 mm Standardna oprema: Osnovna oprema: Ksdpfxeyz Sw Rs Al Nodk - CNC krmilnik Cybelec CybTouch 12 - 4 osi: Y1-Y2-X-R - Zadnji prislonski sistem mod. GHP-2 - Glavni motor s servopogonom - Varnostni sistem: DSP AP+MCS - Hidravlični sistem HAWE - CE standard

Stanje: novo, ALTENDORF Model F45 Pro Drive Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at special price with full manufacturer's warranty. Pro Drive Control: 3.5" colour display with separate keyboard Automatic adjustment of parallel and mitre fences when tilting the saw unit Easy axis calibration Machine diagnostics, operating hours counter, USB interface Recall of last measurement entry (back function) 99 storable cutting programs Grooving: with automatic stepwise positioning of the parallel fence Kdsdpoiz Aufefx Al Nsk 400V / 50Hz - Europe, scale: mm scale Electromotive height and tilt adjustment 0 – 46° for the main saw blade with automatic cut height correction when tilting the saw unit Machine height 910 mm (standard equipment) The F 45 control panel is mounted at eye level, allowing convenient operation of all axes and easy overview of all settings. Single-handed operation of the swing-away device is easily accessible from the operator's position in front of the machine. Another advantage: nothing obstructs your way at the smooth machine front. INCLUDES OPTIONS: M62003 Template holder M64080 Increased cutting height with saw blade projection up to 204 mm max. M51101 Single-side tilting saw unit with 7.5 kW (10 HP) motor M24030 2-axis scoring unit with electromotive height and lateral adjustment M24037 LED lighting for the scoring unit hazard zone M41010 Table extension, 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Mitre-angle fence, crosscutting up to 3500 m M44443 CNC-controlled parallel fence, cutting width 1300 mm M44450 Front support roller M37003 On/off switch on the double roller carriage Note on used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex location - free loading! • Machines have been cleaned and function-tested. • All machines are purchased as inspected, without any warranty claim. Buyers are free to inspect the machines at the site. • Special agreements only possible in written form. (We only answer inquiries with your address + telephone number!)