Gbt Gmbh Sudge Posode S Hlajenjem Pivine nakup rabljenega (113.061)

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WT 1104, skupna višina: 3.421 mm, skupna širina: 4.704 mm, skupna dolžina: 9.550 mm, nosilnost: 200 kg, gradbena višina: 3.421 mm, Vacuum Turning Gantry for Panels The turning unit offers two different "automatic" operating modes: I. Transfer without rotation The panel is shifted sideways, aligned to the reference edge (zero line) of the machining center, and indexed further to the machining center (BAZ). II. Transfer with rotation The panel is shifted sideways and rotated along its longitudinal axis before being indexed to the machining center (BAZ). Each function can also be operated manually in "hand" mode. Kdodpfx Afeyta R Ujvel SPECIFICATIONS: Maximum panel size: L x W x H: 8000mm x 2500mm x 100mm Maximum weight: 200kg Minimum panel size: L x W x H: 1500mm x 1500mm x 12mm The turning gantry is equipped with a total of 24 vacuum suction cups, ensuring gentle handling of the elements. The elements are always picked up using vacuum and then either transferred horizontally to the zero line of the machining center or additionally rotated by 180° while in transit before being placed at the reference edge. Rotation is monitored via absolute encoders; cross-travel positioning is controlled by adjustable photoelectric sensors. Vacuum is generated by a blower. The roller table, measuring 8500 mm x 4300 mm (width), with roller diameter Ø 108 mm, is fitted with material-friendly rubber rings; it is powered by a SEW geared motor. The roller table is controlled via a frequency inverter, speed v=45 m/min, freely adjustable. GENERAL INFORMATION: The entire area is fenced off, with two sliding doors securing the longitudinal side of the system. The doors are monitored for safety. The operator panel with a 12" touchscreen is installed in the fenced area. The installed PLC S7-1500 is programmed with three operational levels: • Automatic mode • Manual mode • Maintenance mode Input signals, feed side: - Start roller table - Turn yes/no - Emergency stop (entire system) Input signals, discharge side: - Start roller table - Emergency stop (entire system) Output signals, system: - Emergency stop (entire system) - Part received

Stanje: novo, Leto izdelave: 2025, Priprava abraziva 1x pometna jama 1x vedričasti transporter Kdjdpjw Ivvcsfx Afvel 1x zračni separator 1x električno vibracijsko sito 1x bunker za abraziv 1x tlačna peskalna naprava 200 l 1x peskalna cev, peskalna šoba, varnostno stikalo, krmilni kabel 1x krmilna omarica Opcijska oprema: - Prečna polžna transportna naprava čez celotno širino peskalne hale (tudi kot dodatni zalogovnik za večurno peskanje) - Razširitev na 2 abraziva: feritno in mineralno - Bubenski magnetni separator - Končna stopnja demagnetizacije - Magnetni predal

Stanje: novo, Leto izdelave: 2025, Blast Container High Cube Basic with Sweep Floor Shovel Hopper for approx. 4 pressure vessel fillings + blast vessel filling for extended blasting operation without refilling. Type SC.20FHC.5800 Basic Standard equipment, ready for operation: (Fill blasting media and connect power and compressed air) - 1x Control cabinet with emergency stop, Siemens Logo - 1x Pressure blast vessel - 1x Pressure regulator and water separator - 1x Blast hose DN 25 with 8mm nozzle - 1x Remote control with dead man's switch - 1x Media loading box/bunker - 1x Blast media sieve + coarse particle collection bin - 1x Vertical separator with blast dust extraction (dust reduction during blasting) Kdodpfx Aow Ivk Tsfvjl - 1x Filter unit with pre-chamber separator - 1x Extraction wall as louvre/baffle separator - 1x Rubber wall cladding, 4mm with fabric reinforcement - 1x Tread plate floor 3/5 - 1x LED lighting - 1x Emergency lighting, door end switch, emergency stop - 1x Breathing air filter - 1x Blasting helmet - 1x Blasting gloves - 1x Suit Options: - Side Door Open, container can be fully opened on the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - Crane rail 500 kg - C-profile rail for powder coating equipment - Blast trolley - Filter with Big Bag - HEPA after-filter for contaminated dusts, e.g., when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor - And much more on request!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 15.000 mm, notranja višina: 5.000 mm, filtrirna površina: 352 m², volumenski pretok: 22 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. Kjdpfxsu Hy Tps Afvodl For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj z nizko hitrostjo Širina reza - 150 mm Moč motorja - 2,2 kW Hitrost rotorja 200 obr/min Ksdjyf I N Aepfx Afvodl Število nožev rotorja - 9 kosov Število nožev statorja - 2 kosa Na voljo 6 kosov, brezhibno stanje Kapaciteta do 25 kg/h Cena 1000 EUR na kos

Stanje: novo, Leto izdelave: 2026, Peskalni voziček 5t z baterijskim pogonom za peskalno napravo - Nosilnost 5t Kjdpfx Aeyyxidjfvodl - Za tirni sistem - Baterijski pogon - Daljinsko upravljanje - Dimenzije: dolžina 3000 mm, širina 1000 mm - Površine za namestitev držal za obdelovance

Stanje: novo, Leto izdelave: 2026, Peskalni voziček 10t za peskalno napravo s pnevmatskim pogonom. - Pnevmatski pogon za obremenitev 10 t - Obremenitev: 10 t - Dimenzije: D=2000mm Š=2000mm V=500mm - Za tirni sistem Kdsdpfxsyyxfre Afvsl - S sprejemnimi površinami za vpenjanje obdelovancev - Rotacijska miza kot opcija

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Ročni strojni voziček za peskalno napravo, nosilnost 5 t - D= 3000 mm, Š= 1500 mm, V= 500 mm - Nosilnost: 5 t - Peskalni voziček s obročastimi valji za tirnice v peskalni hali - Profili postavljeni pokonci, da lahko peskalni material odteče Kodpfoyyxa Nox Afvjdl - Vlečne zanke za viličarja - Vrtljiva miza na voljo kot opcija

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SG10, PMH nitni granulater, tip SG10 Kompaktni stroj z dvema pogonoma za vpenjanje in rezilni rotor, zasnovan za eno nit s premerom največ 3,5 mm. Hitrosti obeh pogonov sta brezstopenjsko nastavljivi. Tako je mogoče zagotoviti širok razpon dolžine granulata. Ksdpfxjkyt T So Afvodl

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DMG3 size 22, skupna masa: 31.100 kg, prenosno razmerje: 6.943, Hlavní převodovka FLENDER, DMG3 velikost 22 i = 6.943 PM = 4 000 kW n1 = 993 ot./min n2 = 143 ot./min Počet zubů věnce = 292 n mlýna = 15,1 ot./min Provozní součinitel dle ISO 6336 = 2,3 Hřídel d1 (levá): Ø 170 n6 x 250 dlouhá G1 = 790 mm se 2 pery dle DIN 6885-1, Hřídel d1 (pravá): Ø 170 n6 x 250 dlouhá G1 = 790 mm se 2 pery dle DIN 6885-1, Těsnění obou hřídelí d1 s labyrintovým těsněním Chlazení a tlakové mazání s externím olejovým chladičem OWTS 10 (samostatná položka) Hřídel d1 levá – osazena částí 2 spojky UZWN 460 Hřídel d1 pravá – osazena částí 2 spojky RWN 800 Náplň oleje není součástí dodávky Kedjyuct Ujpfx Afvsdl Včetně: - Mazací systém OWTS 10 - Potrubí - Hlavní vstupní spojka RUPEX RWN 800 - Sada vymezovacích vložek s nástroji pro ustavení - Sada kotevních šroubů - Pomocná převodovka FLENDER H3 SH velikost 11 - Pomocný motor tbd225M - Pomocná vstupní spojka FLUDEX FAR 395x224 - Pomocná výstupní spojka UZWN kompakt 460 - Klínový řemenový kotouč - Klínové řemeny - Odstředivá brzda FB 2x208 - Brzdový buben TE - Zadržovací brzda TE 315/800/60 - Základový rám - Nástroj pro předepínání

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: omejena funkcionalnost, Prodajam Fischerscope H100C XYp mikro-/nano-trdotestni sistem podjetja Helmut Fischer (letnik 2001). Naprava je bila nazadnje uporabljena v laboratoriju, trenutno pa ni popolnoma funkcionalna, zato se izrecno prodaja kot neizpravna / za popravilo / za dele. Znane težave: – Premikanje mize ne deluje pravilno (miza je pod merilno glavo, ne pod mikroskopom → natančne meritve trenutno niso mogoče). Verjetno elektronska napaka. – Merilna miza se samodejno premika v levo – verjetno napaka joysticka. – Menjava indentorja ne deluje pravilno (senzor se ne premakne povsem do omejevalca). Kedpfx Afeyu Nabevsdl Naprava je zato posebej primerna za: • Popravilo z znanjem elektronike • Pridobivanje rezervnih delov • Raziskave / za hobi uporabnike Optično stanje je dobro glede na starost.

Leto izdelave: 2018, stanje: skoraj kot novo (rabljeno), Weber screwing system: - Screw bunker with orientation and feeding system - dosing system - pneumatic feeding system - screwing gun - festo pneumatic gun travel operation system - frequency regulator 4 complete, barely used, systems for sale. Price is negotiable. Screwing gun heads can be changed and adapted for multiple different types of screws. Contact for more information. Kjdpfsif Rvaex Afvedl

Leto izdelave: 2026, stanje: novo, A modular system that you can easily adapt to your requirements: * Mechanical or electric mill * Rack-and-cloth press or basket press Kdedpfx Afjuady Dovsl * Fruit presses in various sizes: 5 to 70 liters All home cideries offer: * Maximum juice yield thanks to hydraulic technology * Ergonomic and hygienic operation * Compact unit with mobile chassis RINK – Home Cideries – tailored to your needs: * The Standard Home Cidery includes a manual fruit mill and enables an hourly output of up to approx. 70 liters. * The Super Home Cidery includes a RINK grating mill and enables an hourly output of up to approx. 150 liters.

Leto izdelave: 2026, stanje: novo, Flow Pasteurizer Electric with Preheating of Juice in Coaxial Tube Heat Exchanger You utilize existing low-cost energy sources (e.g., solar, heat pump, biogas, etc.) even if the temperature level is insufficient for pasteurization. The remaining temperature increase to the required pasteurization level is achieved electrically (with lower energy demand). Components: Preheating: * Coaxial tube heat exchanger (KRWT) with thermal insulation (up to 60kW) thermal * Mixing unit incl. circulation pump ensures stable inlet temperature of heating water Flow Pasteurizer Electric: * Electric heater 13.5 / 18 / 27 / 31.5 kW – 400 V * Stainless steel tank 150 ltr. with thermal insulation and stainless steel tube heat exchanger * Automatic under-temperature protection (compressed air required) * Stainless steel juice pump Pasteurizer mounted on chassis Easy operation Kodpfxjuadm Do Afvsdl Total capacity up to 1,100 liters per hour ##### RINK – Pasteurization systems for over 30 years Proven technology – over 500 units in customer operation

Stanje: novo, Leto izdelave: 2026, 150 ltr. insulated tank with 13.5 kW / 400 V heater featuring automatic temperature cut-off, frame, and bag-in-box filling unit with bag holder * Simple, safe, excellent value for money * No temperature fluctuations * Exceptionally gentle heating thanks to large heating surface (0.4 m²) * With thermostat: switches off at set temperature * Height-adjustable stainless steel frame – tank drains completely "Leisure time" during heat-up: approx. 40 min for 150 ltr. Kdjdpfxst U H Nro Afvsl Hourly output approx. 150 ltr. Also available with 18 kW / 400 V heater – hourly output 180 ltr. Two-station bottle filling available No 400V connection available? Tank pasteurizer is also available with gas-fired condensing boiler. ##### RINK – pasteurization systems for over 30 years Proven technology – more than 500 units in customer use

Stanje: novo, Leto izdelave: 2026, skupna masa: 3.900 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 600 l, barva: temno rdeča, moč: 2.000 kW (2.719,24 KM), Izhodni tok: 360 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 200 kW (271,92 KM), nazivna (navidezna) moč: 250 kVA, neprekinjena moč: 200 kW (271,92 KM), neprekinjena (navidezna) moč: 250 kVA, skupna dolžina: 4.000 mm, skupna širina: 1.450 mm, skupna višina: 2.300 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Perkins, vrsta hlajenja: voda, Diesel generator set 250 kVA Generator type: P250SSF Condition: New, 2026 Engine: Perkins 1206A-E70TAG2 Alternator: Leroy Somer LSA 46.3 M7 Rated output (standby/ESP): 275 kVA / 220 kW Rated output (prime/PRP): 250 kVA / 200 kW Rated output (continuous/COP): 200 kVA / 160 kW Rated voltage: 230/400 V Rated frequency: 50 Hz Kedjfxlddspfx Afvsdl Control voltage: 12VDC Speed regulation: Electronic Voltage regulation: Electronic (AVR) Sound-insulated, weatherproof Earthing system: TN-C Incl. control unit Incl. batteries (2 x 110Ah) Incl. integrated fuel tank (600 L) Incl. integrated bund for fuel and engine fluids Incl. circuit breaker (ABB, 4P) Incl. documentation/manual Incl. wiring diagram Warranty: 12 months or 2,000 operating hours, whichever comes first. You can configure your generator individually with us and order numerous optional features: - Socket package 16A - 125A with residual current device (RCD, all-current sensitive) - Remote control - Insulation monitoring - Enhanced sound insulation (up to 65 dB at 7m possible) - Fully automatic emergency power system with automatic mains-generator transfer switch available on request - Grid parallel operation with load sharing and peak load (ComAP IG 1000 control, VDE 4510 certified) - CHP version - Emergency power system (NEA) for indoor installation with air ducts, ventilation, etc. Manufactured in Germany / Made in Germany Delivery nationwide for an additional charge possible. Contact us by email or give us a call – we will be happy to advise you and provide a non-binding quotation.

Stanje: novo, - samodejno podajanje vijakov - samodejni izklop gibanja lijaka preko regulacije vleke Kdsdpfx Ajy Aiaxsfvol - avtomatski izklop globine - pnevmatski pogon in upravljanje - pnevmatsko izmetavanje vijakov in zasilna zaustavitev - nožno upravljanje - zaščitni okvir (varnostna naprava)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5064, Prosimo, navedite svojo ponudbeno ceno. Prodaja samo znotraj Evrope, vključno s Turčijo. Kdedpfeu Rdm Ujx Afvol Robot ni del dobave. Tehnični podatki glej priloženo dokumentacijo. Brez embalaže; izključena je kakršnakoli garancija. Če želite napravo razstaviti sami, prosimo, navedite to v svoji ponudbi. Ne prevzemamo odgovornosti za pravilnost tehničnih podatkov, popolnost dodatne opreme in orodij ter za izpolnjevanje vseh zahtev glede varnosti in varstva okolja, navedenih v predpisih o varstvu pri delu.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5041, Prosimo, navedite svojo ponudbeno ceno. Prodaja samo znotraj Evrope, vključno s Turčijo. Kdodpfju Izvhox Afvsl Robot ni vključen v dobavo – Robot ni predmet dobave. Tehnični podatki so navedeni v priloženem dokumentu. Brez embalaže; izključena so vsa jamčevalna pravica. Če želite napravo demontirati sami, nas o tem obvestite v svoji ponudbi. Ne prevzemamo odgovornosti za pravilnost tehničnih podatkov, za popolnost pribora in orodij ter za izpolnjevanje vseh varnostnih in okoljskih zahtev iz navodil za varstvo pri delu.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, moč: 83 kW (112,85 KM), skupna masa: 6.000 kg, skupna dolžina: 460.000 mm, skupna širina: 4.000 mm, skupna višina: 4.300 mm, Leto izdelave: 2024, obratovalne ure: 300 h, vrsta vhodnega toka: trifazni, Prodajamo popolnoma delujoče škarje za rezanje odpadkov/alligatorske škarje. Konec leta 2023 jih je generalno obnovil ATM. - Takoj pripravljene za uporabo - Brez potrebnih popravil - Priloženi so 4 podložni obroči Področja uporabe: Kdjdpoq Nmw Iofx Afvel - Rezanje Cu, Zn, Pb katod do debeline 25 mm - Rezanje avtomobilskih hladilnikov do višine 105 mm - Rezanje Al pločevine, profilov, palic, cevi do debeline 25 mm - Rezanje Cu, Al, Pb cevi do višine 105 mm - Rezanje nerjaveče pločevine do debeline 16 mm - Rezanje Fe profilnih cevi, pločevine, cevi, palic, ploskih želez Alligatorske škarje, škarje za odpad, katodne škarje, škarje, klešče, hidravlične škarje, škarje za pločevino, giljotinske škarje, škarje za katalizatorje, listne škarje, škarje za avtomobilske hladilnike, kabelske škarje, škarje za cevi

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, laserska moč: 30 W, vrsta hlajenja: zrak, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, The LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is a universally applicable, high-performance marking solution designed for industrial applications. It is suitable for precise and permanent marking of a wide range of materials including metals such as steel, aluminum, and hard metals, as well as plastics. The integration of a fiber laser ensures high marking quality while keeping maintenance requirements to a minimum. The system can be configured with fiber lasers in power classes of 20 W, 30 W, or 50 W, enabling optimal adaptation to different requirements concerning material type, marking depth, and cycle time. In many industrial sectors, the use of this technology is indispensable due to the durability and abrasion resistance of the markings. The included laser software allows the creation and positioning of content such as texts, numbering, 2D codes (e.g., DataMatrix), QR codes, and logos. Automatic serialization logic enables the generation of consecutive serial numbers without manual intervention. Additionally, the software supports importing and processing of external data sources (e.g., Excel spreadsheets) for variable contents like drawing numbers or project names. Integration of a hand scanner for data capture is optionally available. By default, the LAS 28 XLe is delivered with an integrated industrial PC (Windows-based) and fully installed laser software. Various options are available to expand its functionality, including a rotary axis (3-jaw chuck) for marking cylindrical components, side arms for processing long parts, a motorized Z-axis, and modular drawer systems for part feeding. Made in Germany Fiber laser: 30 W, 20 W, or 50 W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150 x 150 mm (optionally larger) • Signal tower for operating status display • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (incl. activated carbon filter) • Optional: Digital height measurement system • Optional: Autofocus system – automatic focus distance determination • Optional: Side arms for large components (single or double-sided) • Optional: Programmable X, Y, and Z axes (software controlled) • EZCAD marking software (German/English) • Pilot laser (easy preview, plain text preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard shelf • Aluminium profile frame • Air-cooled • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Power supply: 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor holder: approx. 1500 x 800 x 1900 mm (LxWxH) Kodpfewkpx Rex Afvjdl • Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta hlajenja: zrak, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, valovna dolžina laserja: 1.064 nm, The LAS 22 is a compact desktop unit with a small working area, ideal for marking small components. Thanks to its compact design, the system is extremely user-friendly and can be used virtually anywhere. The universally applicable LAS 22 laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20 or 30-watt fiber laser. In many industries, laser marking is essential for permanent markings. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without requiring extensive programming knowledge. The software can automatically increment serial and article numbers after initial configuration. Moreover, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Using a hand scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optional: 20 watt) - Laser class 1 - Wavelength: 1064 nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview, contour preview) - Focus finder (simple focusing) - Max. workpiece height approx. 95 mm - Grid holes for fixtures - Clamping area: 310 x 190 mm Kdodpfxeuy H Nqo Afvsl - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230 V - Air-cooled - Laptop with Windows OS (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LAS 23 mit integrierter Absaugung, The LAS 23 portable is a compact and mobile fiber laser designed for flexible direct marking of a wide range of workpieces directly at the site of use. Thanks to its wheeled base frame, the system can be deployed independently of location and can easily be moved to hard-to-reach or large-volume workpieces. This makes it particularly suitable for applications where a stationary laser cell is not practical. The modular design with custom-made attachments allows for quick, tool-free adaptation to different workpiece geometries. The quick-change system enables fast replacement of attachments – ideal for varying marking tasks in production and maintenance. The integrated laser software supports the creation of texts, numbering, 2D codes (e.g., DataMatrix, QR codes), and graphic elements (e.g., logos) through a user-friendly interface that requires no programming knowledge. Serial and part numbers can be automatically incremented. Additionally, there is the option to import variable data – such as drawing numbers or project designations – from external tables (e.g., CSV/Excel files) and automatically integrate them into the marking template. An optional hand scanner can be connected for fast data capture, reducing manual input and increasing process reliability. Made in Germany • Fiber laser 20W (optional 30W, 50W) • Laser class 1 Kedpsvyc Rmofx Afvjdl • CE-compliant, according to EU directives • Wavelength 1064nm • Marking area 70x70mm (optional: 110x110mm) • Signal light for indicating operating status on the hand unit • Marking software EZCAD (other software options available) • 230V connection • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of the portable laser unit: 2.8 kg • Fiber optic cable approx. 2.50 m • Integrated extraction system

Leto izdelave: 2025, obratovalne ure: 2 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos quickly and easily, without extensive programming knowledge. The software can automatically increment serial and article numbers after configuration. Additionally, the software is capable of extracting data (such as drawing numbers, project names, etc.) from existing tables and automatically transferring them to predefined fields. A handheld scanner can also be used. Standard equipment includes a laptop with mount, Windows operating system, and laser software. Optionally, the LAS 28 XL can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, a movable Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger sizes optional) • Marking software EZCAD (German/English) • Signal light to indicate operating status • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: extension arms for large components (one-sided or double-sided) • Optional: autofocus system • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Maximum component height approx. 300mm • Electrically adjustable Z-axis • Laptop with mount and Windows OS • Frame made of aluminum profile • Air-cooled Kedpfx Afsqfcvijvsdl • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 100 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, obratovalne ure: 32 h, Funkcionalnost: popolnoma funkcionalen, dolžina transportnega traku: 2.000 mm, širina transportnega traku: 400 mm, hitrost transportnega traku: 4.000 mm/s, skupna širina: 1.060 mm, skupna višina: 1.800 mm, skupna masa: 350 kg, moč: 3 kW (4,08 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vhodni tok: 10 A, Oprema: dokumentacija / priročnik, nujno zaustavitev, Sortirni stroj pripravljen za delovanje. Programska in strojna oprema v stanju 2025; možno je prinesti material za poskusno sortiranje. Stroj je namenjen za žlindro, ostanke iz drobilnika, ostanek frakcij, kable, aluminij, nerjaveče jeklo, barvne kovine velikosti cca 5–120 mm, odvisno od frakcije je potrebnih 1–2 presejanj. Delovanje je induktivno in magnetizabilno, izmet z mehanskimi lopaticami, zmogljivost cca 2–5 ton. Kodpfoxuq Dgox Afvjdl