Esterer Dkn nakup rabljenega (205)

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Clamping Pressure Test Device Gujdpfxefd Encj Aa Uog Manufacturer: Prema Max. Pressure: 100 MPa Clamping Diameter: 220 mm Weight: 12 kg

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Gedeyh S Aiopfx Aa Usug Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: generalkompletno obnovljen (rabljeno), Loading device with test forces 1-250 kg - Vickers HV1 - HV120 Gusdpfxec Nl Ece Aa Usg - Brinell 15.625 / 31.25 / 62.5 / 187.5 / 250 kg - Rockwell HRA / HRB / HRC Scope of delivery: - Hardness tester - LED illumination unit - Objectives 70X / 140X - Scales 70X / 140X - Diamond indenter 136° Vickers - Diamond cone 120° Rockwell - Ball holder with 2.5mm ball Brinell - Flat test table Ø80mm - Flat test table Ø235mm - Prism support Ø80mm - Power cable - Operating manual with conversion tables Optional: - BVMS3 software

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1600 x 1500 x 1500 mm Weight: 1400 kg Total Power Requirement: 12.6 kW Double Edger DOUBLECUTMAX 450 - Feedthrough width: 950 mm - Adjustment range between left and right saw units: 60 - 430 mm - Cutting height min. / max.: 15 - 80 mm - Min. / max. distance between the saw blades on the left and right saw units: 10 - 100 mm (adjustable with fixed spacer ring) - 4 units carbide-tipped saw blade 400 x 80 mm Z 18 - Width adjustment speed: 10 mm/s Gsdjvz Eu Djpfx Aa Usug - Saw motor power: 2 x 5.2 kW - Feed motor power: 1.1 kW - Width adjustment motor power: 1.1 kW - Total power: 12.6 kW / 400 V - Feed speed: 7, 10, 13, 14, 20, 26 m/min - Dimensions: L = 1600, W = 1500, H = 1500 mm - Infeed length: 3150 mm - Outfeed table length: 2300 mm - Total length: 7000 mm - Weight: 1400 kg OPTIONAL: - Electric measuring device for width adjustment: €92.00 - Laser, 2 units: EUR 1,050.00 - Carbide saw blade 400 x 80 x 4.0/2.8/ Z = 18 GM20, without raker (original saw blade): €95.00 - Carbide saw blade 400 x 80 x 4.2/3.0/ Z = 24 FL with raker – DKN 20x5: €120.00

Stanje: rabljeno, številka stroja/vozila: 83040, Outreach: 150 mm Test height: 200 mm Gedpeb Dkh Nofx Aa Usug Space requirement: 350 x 600 x 1410 mm

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.636 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39t) Gedsfakkcspfx Aa Ueug Axles and suspension: "Disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with start assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension, Wabco Trailerpulse tire pressure monitoring system with ZF wheel-mounted sensors Tires and wheels: 6 wheels with 385/65 R 22.5 tires (manufacturer's choice), Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120, kingpin screwed into a 10 mm thick plate Landing legs: aluminum drop landing legs, 2 x 10t support load, aluminum pivoting feet used for air suspension Brake system: compliant with E.G. standards, two-line braking system, Wabco EBS electronic system with RSS (Roll Stability Support), spring-actuated braking system acting on two axles with control at the rear, aluminum air tank system, premium modulator Electrical system: compliant with StVZO, with 2 LED five-chamber Aspöck Europoint taillights integrated into aluminum rear, 24V system with 1x 5-pin and 2x 7-pin sockets, LED side marker lights, 2 separate LED work lamps at the rear, 2 LED work lamps at the height of the landing gear, 1 LED work lamp inside front left, operable from outside Superstructure / Body: "Interior fully welded" Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN, aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with top and bottom rails, plank profiles inside fully welded, floor as moving floor system installed over 140 mm aluminum cross beams, floor load approx. 7 t/m², cross beams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles beveled, smooth straight rear wall with 2 aluminum swing doors 50/30 mm thick with 4 locking bars integrated into a welded aluminum rear frame mounted in Teflon and stainless steel bearings; following wall made of reinforced top aluminum rail with Kevlar curtain for complete emptying, side brush seal and additional Kevlar side curtain, integrated discharge chute with foldable closing plate at rear left, externally operable, inspection window rear left, 1 sampling gate per rear door (total 2), service door front left Hydraulic system: "Cargo Floor" moving floor system in the floor with hydraulically driven aluminum profiles on aluminum square tubes with approx. 670 PE-HD gliders, approx. 6 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and model to be specified, operating pressure 190–240 bar max., aluminum end pieces welded into the floor, electric controls at rear left with cable remote in a lockable waterproof box Accessories: PVC mudguards with rubber mud flaps, aluminum spare wheel holder, foldable aluminum side underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m aluminum ladder, roll tarp 680g/m² quality with roll tarpaulin system incl

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Šasija izdelana iz samonosilne aluminijaste konstrukcije z ustreznimi ojačitvami v spodnjem pasu za izjemno visoko stabilnost in trdnost? Agregatna šasija iz aluminija, višina okvirja 140 mm (maks. 39 ton), osi in vzmetenje "kolutna zavora 22,5", osi Jost 3 x 9 ton z zračno vzmetjo DC, dvigovanje in spuščanje? Wabco Smartboard? elektronski indikator obrabe zavornih ploščic (BVA) za prikaz na nadzorni plošči (brez opreme za nadzorno ploščo)? 1. in 3. os ločeno dvigljivi z opremo za lažji zagon (brez opreme za nadzorno ploščo), 3. os dodatno z Optiturn, zračna vzmet ECAS. Pnevmatike in platišča 6 koles s pnevmatikami velikosti 385/65 R 22.5, izbira proizvajalca na aluminijastih platiščih Alcoa satin, 11,75x22.5 ET 120 (z jeklenim robom + pribl. 120 kg). Podporne noge aluminijaste podporne noge, proizvajalec Alu-Leg, 2 x 10 ton nosilnosti, za uporabo z zračno vzmetjo uporabljamo vrtljive podplate. Zavorni sistem v skladu z normo E.E.G., dvovodni zavorni sistem, sistem EBS E Wabco z RSS sistemom (podpora stabilnosti pri vožnji), zavora s pomnilnikom deluje na dveh osi in se upravlja na zadnji strani, aluminijasti zračni rezervoar, vrhunski modulator. Električna napeljava v skladu z direktivami STVZO z 2 petkamernimi lučmi tipa Aspöck Europoint III, integriranimi v aluminijasto zadnjo stran, 24-voltni sistem z 1 x 15-polnim in 2 x 7-polnim vtičem, s stranskimi gabaritnimi lučmi v LED izvedbi, 2 delovni žarometa na zadnji strani, 2 LED delovna žarometa stransko, na višini podpore, 1 LED delovni žaromet notri spredaj, na levi strani, upravljanje od zunaj. Nadgradnja/kiper "Notranjost nadgradnje popolnoma zvarjena" Gjdpsgcw Risfx Aa Ujug nosilnost čelne stene 17.250 dkn, nosilnost zadnje in stranskih sten 10.250/13.400 dkn, aluminijasta kiper karoserija, stranske stene, 30 mm debele aluminijaste profile (2-3 mm), 600 mm široke, popolnoma zvarjene z zgornjim in spodnjim pasom, profili stranskih sten notri popolnoma zvarjeni!!, dno kot sistem potisnega dna, nameščen na 140 mm aluminijastih prečnih nosilcih, nosilnost tal približno 7 ton/m2, prečni nosilci nameščen ožje (približno 350 mm), aluminijasta čelna stena z 600 mm profilom stranske stene, 2-3 mm debel, v ravni izvedbi, posebni aluminijasti vogalni profili v poševni izvedbi, ravna zadnja stena v ravni izvedbi z 2 aluminijastimi krilnimi vrati, 50/30 mm debeline, z 4 vrtljivimi zapahi, v zvarjen aluminijast zadnji okvir, pritrjeno v teflonskih ležajih in ležajih iz nerjavečega jekla, sočasno gibanje v ojačanem zgornjem aluminijastem pasu, aluminijasta stena z "Kevlar tkanino" za popolno izpraznitev, stransko tesnilo s krtačami in dodatna Kevlar tkanina stransko, integriran izpustni lijak s pokrovno ploščo, ki se odpira, na dnu, upravljanje od zunaj, na levi zadnji strani, okno za pregled zadaj na levi strani, po 1 preizkusni odprtini v zadnjih vratih, torej 2 kos, servisna vrata na levi strani v čelni steni. Hidravlični sistem "Cargo Floor", sistem s 24 ploščami - gladka izvedba! Sistem potisnega dna v tleh, z hidravlično premikanimi aluminijastimi profili na aluminijastih štirikotnih profilih, ležaji z okoli 880 PE-HD drsniki, debelina tal približno 8 mm, hidravlika z okoli 200 mm giba, fiksne pritrditve na čelni steni, ločena možnost priključka hidravlične cevi pod vozilom, s fiksnimi pritrditvami, velikost cevi NW 21, fiksne pritrditve z velikostjo in izvedbo, ki bo navedena pozneje, delovni tlak 190-maks. 240 bar, aluminijasti končni kosi, zvarjeni v dno, električno upravljanje zadaj na levi strani, s k

Stanje: dober (rabljeno), Preizkuševalec tlaka, merilec tlaka, preizkusni manometer, merilnik kompresije -Proizvajalec: Hydrotechnik Limburg, preizkuševalec tlaka Gujdpfeyccvfex Aa Uog -Tlačno območje: 2x 0 do 10 bar -Dimenzije: 260/150/V205 mm -Teža: 3,2 kg

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Gsdpfxefi Nmwj Aa Uoug Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: rabljeno, Aggregate module, format processing unit, machining unit, milling unit, profile milling unit, joining milling unit, cross-cut unit, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine - Manufacturer: Hemag, saw unit tiltable 30° - Saw blade: max. Ø 350 x 30 mm - Motor: Perske type DKNS 120/2, 3.0 kW / 2830 rpm - Protection class: IP 54 - Dimensions: 950/780/H630 mm Gusdegy Dbwspfx Aa Uog - Weight: 115 kg

Stanje: novo, Tester ATP-1000 se lahko uspešno uporablja v podjetjih, ki se ukvarjajo s popravili turbopolnilnikov, pa tudi v avtomobilskih servisih, ki ponujajo široko paleto popravil za ugotavljanje vzroka za okvaro turbopolnilnika. Primeren je tudi za podjetja, ki dobavljajo elektronske aktuatorje. Tester preverja funkcionalnost aktuatorja kot celote in njegovih posameznih elementov, kot sta senzor za položaj in servomotor. Ločena diagnostika vsakega elementa omogoča natančno ugotavljanje stanja aktuatorja turbopolnilnika in zaznavanje morebitnih težav. ATP-1000 je enostaven za uporabo in omogoča hitro preverjanje stanja aktuatorja in njegovih komponent. To ga je naredilo za učinkovito orodje za spremljanje funkcionalnosti aktuatorjev. POMEMBNE LASTNOSTI • Testiranje elektronskih aktuatorjev za turbopolnilnike • Programiranje (prilagajanje) elektronskih aktuatorjev SIEMENS • Testiranje 12-voltni DC motorjev do 2A • Testiranje solenoidov za povečanje tlaka, ki se uporabljajo v pnevmatskih sistemih • Testiranje elektronskih in pnevmatskih senzorjev za položaj aktuatorja • Deluje z vsemi običajnimi vrstami aktuatorjev in podobnimi, glede na načelo delovanja. • Komunikacijski protokoli: PWM, CAN, ADC, SENT. KLJUČNE FUNKCIJE • Zaščita naprave s tokom 2A za 3 sekunde • Samodejno zaznavanje polaritete DC motorja v aktuatorju • Namig za barvno kodiranje kabla glede na izbrano vrsto aktuatorja • Prikaz vrednosti senzorja za položaj v odstotkih • Prikaz dodatnih parametrov programirljivih aktuatorjev HELLA: številka različice programske opreme, programirana vrednost kota • Prenosna različica za testiranje neposredno na vozilu • USB nadzor aktuatorjev pri delu s programsko opremo GEOMET-2000 za merilnike pretoka turbopolnilnikov. • Redno posodabljanje programske opreme testerja Gujdpsn E S T Usfx Aa Uog KABLI Komplet diagnostičnih kablov za aktuatorje, 12 kosov. Komplet diagnostičnih kablov za senzorje za položaj, 6 kosov. Komplet kablov za manj pogoste turbine, 11 kosov. USB kabel, 1 kos. Kabel AC/DC 12V, napajalnik 4A, 1 kos. !!!! Če iščete programer za elektronske aktuatorje, me vprašajte.

Stanje: novo, Novo! Zasnovan za preizkus obremenitve letvic posteljnega dna. Godpfsfftr Hjx Aa Usug Poraba energije: 230 V Vpenjalna sila nastavljiva od 2 do 10 bar (do 200 kg). Hitrost testiranja cca. 44 kosov / min. Nastavljiva dolžina izdelka. Enostavno vzdrževanje. Test letvic označen. Oznaka na etiketi se lahko spremeni.

Stanje: dober (rabljeno), Double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor, spindle motor, electric motor - Manufacturer: Perske, Milling Motor Electric Motor Type DKNS 1207/2 - Power: 100 Hz, 3 kW, 5,800 rpm / 200 Hz, 5 kW, 11,350 rpm Gsdevydt Nopfx Aa Uoug - Voltage: 380/400 V - Shaft Mounting: Ø 35 x 75 mm - Quantity: 2 motors available - Price: per unit - Dimensions: 460/250/H200 mm - Weight: 35 kg/unit

Stanje: dober (rabljeno), Pressure testing device, measuring instrument -with drag pointer -maximum pressure: 20 bar -high-pressure hose Gujdpfeb A Rlyjx Aa Uog -dimensions: 400/160/H200 mm -weight: 4 kg

Stanje: dober (rabljeno), Device tester, power supply - For: 15 V devices - Measurement range - Test current: max. 300 mV Gusdjcdlt Sopfx Aa Usg - Dimensions: 250/260/H120 mm - Weight: 1.9 kg

Stanje: dober (rabljeno), Double-end tenoner, edge processing machine, scoring motor, machining motor, milling motor, spindle motor - Manufacturer: Perske, milling motor type DKNS 502/2 with bracket - Power: 0.15 kW, 11,160 rpm - Voltage: 133 V / 200 Hz - Shaft mount: Ø 15 x 15 mm Gjdpfovy Sqvex Aa Usug - Saw blade: Ø 140 mm - Dimensions: 260/200/H200 mm - Weight: 4.5 kg.

Stanje: dober (rabljeno), Legionella Water Tester Gjdpfx Aob A Sh Tja Usug - Supplied with documentation in English - Dimensions: 480 x 380 x H180 mm - Weight: 3.2 kg

Stanje: novo, Leto izdelave: 2025, Stehfalz-Umformmaschine F3 mit Längenmessgerät wurde von unserem Unternehmen speziell für die Herstellung von Stehfalz-Dachpaneelen zur Verlegung auf Dächern und Fassaden verschiedenster Gebäude und Konstruktionen entwickelt. Blechzuschnitte werden über die Profilierwalzen der Maschine geführt, um die gewünschte Form des Stehfalzpaneels zu erzielen. Diese Produktionsweise ermöglicht eine Fertigungsleistung von ca. 10 Metern pro Minute und ist somit für jedes Dachdecker-Unternehmen geeignet. Die Maschine verfügt über ein benutzerfreundliches System zur schnellen Breitenverstellung, sodass ein Wechsel von einer Paneelbreite zur anderen in wenigen Minuten erfolgen kann. Die F3-Maschine verarbeitet Paneele mit einer Breite von 200 bis 700 mm. Verarbeitet werden können Blechtafeln und Coils aus verzinktem Stahl, Kupfer, Zink, Aluminium, Edelstahl usw. Maximale verarbeitbare Materialstärke – 0,8 mm. Die Stehfalz-Profiliermaschine F3 ist sowohl in Standardausstattung als auch mit zusätzlichem Zubehör erhältlich, welches den Funktionsumfang erweitert und den Arbeitsprozess vereinfacht. Als Zusatzausstattung bieten wir einen Fußabwickler an, der dank seinem geringen Gewicht und kompakten Abmessungen direkt auf der Baustelle eingesetzt werden kann. Das Coil kann einfach auf den Abwickler gelegt und der Maschine zugeführt werden. Optional ist ein Längenmessgerät erhältlich, mit dem Dachpaneele auf die gleiche Länge halbautomatisch abgelängt werden können – ganz ohne Markierungen mit Maßband oder Lineal. Mit diesem Zubehör sparen Sie Zeit und erhöhen die Präzision. Zusammen mit dem Längenmessgerät wird häufig ein Querschneidemesser bestellt, um Paneele direkt von der Coil auf die gewünschte Länge abzuschneiden. Weitere Optionen beinhalten Profilwalzen für strukturierte (gerippte) Paneele, die die Steifigkeit des Dachsystems erhöhen. Die Umformmaschine kann mit oder ohne diese Walzen genutzt werden. Für gebogene Paneele bieten wir spezielle Radiuswalzen an – damit fertigen Sie Bogenpaneele mit großem Biegeradius für z. B. Hallen und andere Sonderbauten. Wir bieten eine schlüsselfertige Lösung für die Herstellung von Hallendächern. Für den Schutz vor Beschädigungen und zur Vermeidung von Fremdkörpern im Maschineninneren empfehlen wir die Ausführung F3 mit schützendem Deckel – dies erhöht auch die Arbeitssicherheit. Gujdpoh Aw Rnofx Aa Ueg Zum Verschließen der Falzverbindung stehen spezielle Stehfalzwerkzeuge zur Verfügung. Für die Montage der Dachpaneele verwenden Dachdecker sogenannte Gleitklammern – zur Produktion dieser bieten wir Stanzpressen (Gleitklammerformer) an. Mit der Stehfalz-Dachprofiliermaschine F3 und dem entsprechenden Zubehör sind unsere Kunden und Partner in der Lage, wirtschaftlich und flexibel Stehfalz-Dachpaneele herzustellen und den Arbeitsprozess komfortabel und rationell zu gestalten.

Stanje: rabljeno, Device tester, power supply Gsdpfxjcdlt Eo Aa Uoug - For: 15 V devices - Measuring range - Measuring current: max. A - Dimensions: 233/225/H160 mm - Weight: 1.9 kg

Stanje: novo, vhodna napetost: 400 V, - ODLIČNA KAKOVOST IZ EVROPSKIH VIROV - NERJAVEČA JEKLENA SPIRALA - NERJAVEČA JEKLENA POSODA - PROGRAMIRLJIV DIGITALNI NADZOR ZA OBE HITROSTI - TUDI Z ROČNIM GUMBOM NA ZASLONU Guodpfx Asx At Htsa Ujg - MOŽNO TUDI VRTENJE V OBRATNI SMERI - POSODA SE LAHKO VRTI LOČENO - UGODNA CENA ZA ODLIČNO KAKOVOST

Stanje: rabljeno, Metal bellows coupling, jaw coupling, connecting coupling -Manufacturer: Gerwah -Type: DKN 45 -Shaft-to-shaft -Outer diameter: 32 mm -Inner diameter: 10 mm Gedpfxob Nkvgo Aa Ueug -Weight: 0.07 kg

Stanje: dober (rabljeno), Double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor, spindle motor Gusdjb A Idiopfx Aa Usg - Power at 50 Hz: 4.4 kW, 2890 rpm - Power at 100 Hz: 6.6 kW, 5860 rpm - Shaft diameter: Ø 35 mm - Tool diameter: Ø 250 mm - Quantity: 3 motors available - Price: per piece (Other motor types available on request) - Dimensions: 560/240/H160 mm - Weight: 50 kg

Stanje: dober (rabljeno), Double-end profiler, edge processing machine, scoring motor, cutting motor, spindle motor, milling motor - 1x Motor: 0.15 kW, 11,160 rpm at 200 Hz - Saw: max. Ø 150 mm - Motor: mounted on linear guides - Travel: 320/100 mm - Dimensions: 550/250/H330 mm Guedob A Nypepfx Aa Uog - Weight: 17 kg

Stanje: dober (rabljeno), Dvojnosni profilirnik, stroj za obdelavo robov, motor za zarezovanje, motor za rezanje, elektromotor, vretenasti motor, rezkalni motor - Moč: 6,6 kW 8915 min⁻¹ pri 300 Hz - Napetost: 165 voltov - Vpenjalna gred: Ø 35 mm - Dimenzije: 520/247/V145 mm - Teža: 41 kg Godpscfihaofx Aa Ueug

Stanje: dober (rabljeno), Double-end tenoner, edge processing machine, scribing motor, cutting motor, spindle motor, milling motor - 1x Motor: 0.15 kW, 11,160 rpm at 200 Hz Guedpob A H T Iofx Aa Usg - Voltage: 133 Volts - Shaft diameter: Ø 15 mm - Tool: Ø 160 x 3.5 mm - Quantity: 3 motors available - Price: per piece - Dimensions: 200/85/H70 mm - Weight: 3.3 kg