Bongard 1 Fermentacijska Komora, 4 Vozički nakup rabljenega (102.156)

Stanje: novo, Ponujam profesionalno črpalko za sodčke priznanega nemškega proizvajalca Lutz – namenjeno delu z različnimi tekočinami (kemikalije, olja, industrijski mediji). ✅ Stanje: ✔️ Novo ✔️ Ohišje motorja je bilo zamenjano z originalnim (tovarniškim) – prejšnje je bilo poškodovano med transportom ✔️ Popolnoma delujoča, pripravljena za uporabo Nedpsyzulwjfx Ah Uelb 🔩 Tehnični podatki: Proizvajalec: Lutz Pumpen GmbH (Nemčija) Model črpalke: MP PP 50/41-R DL SS Motor: MI 4-230 Napajanje: 220–230 V / 50 Hz Moč: 450–500 W Tok: 2,5 A Zaščitni razred: IP24 Dolžina cevi: 1200 mm Material: PP (polipropilen) + nerjavno jeklo (SS) ⚙️ Uporaba: industrijska kemija olja, tehnične tekočine industrija, delavnice, proizvodnja praznjenje sodov in rezervoarjev 📦 Komplet vsebuje: ✔️ Črpalka Lutz ✔️ Motor MI 4-230 ✔️ Cev + oprema, vidna na slikah 🌍 Država izvora: 🇩🇪 Nemčija ℹ️ Dodatne informacije: Visokokakovostna oprema – nemška proizvodnja Idealno za profesionalno uporabo Možnost pošiljanja ali osebnega prevzema

Stanje: zelo dobro (rabljeno), Naprodaj električni motor podjetja Kaltenbach Maschinenfabrik Cena velja za 1 kos Stanje: uporabljen, delujoč Motor preverjen s testerjem Vidne običajne sledi uporabe in skladiščenja Tehnični podatki: Proizvajalec: Kaltenbach Maschinenfabrik Tip: DKV 112M 238 4 Trifazni motor Nodpfx Aheyv Uvxj Ujlb Moč: 1,7 / 2,6 kW Napetost: 400 V, 50 Hz Zaščita: IP54 Izolacijski razred: F Število vrtljajev: 700 / 1415 obr/min Dahlander večhitrostni motor Premer gredi približno 28 mm

Stanje: zelo dobro (rabljeno), Stanje: rabljeno, z običajnimi sledovi uporabe, tehnično popolnoma delujoče Proizvajalec: Vetter (Nemčija) Država proizvodnje: Nemčija 📦 Komplet vsebuje: pnevmatično blazino Vetter zračne cevi s hitrimi spojkami transportno torbo viden komplet kot na fotografijah ⚙️ Tehnični podatki: Model: Tip 1/13 (VSM 14) Maks. dvižna sila: 65 kN (pribl. 7,2 tone) Maks. delovni tlak: 1 bar (14,5 PSI) Nazivna prostornina: 403 l Poraba zraka: 806 l Letnik: 2018 🛠️ Uporaba: Nsdpoy Af S Rjfx Ah Uslb tehnično reševanje (gasilci) dvigovanje strojev in vozil servisna in industrijska dela nujne primere 📌 Dodatne informacije: oprema priznanega nemškega proizvajalca čvrsta, vzdržljiva konstrukcija hitro in varno dvigovanje težkih elementov na prodaj natančno kot na slikah

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, 1. WEISHAUPT WM-G10/4-A (z dovodom za plin) - Moč: 100-1100 kW - Izvedba: ZM-LN - Leto izdelave: 2020 2. WEISHAUPT WM-G10/3-A (z dovodom za plin) - Moč: 100-1000 kW - Izvedba: ZM - Leto izdelave: 2015 (1 kos), 2013 (na voljo 2 kosa) 3. WEISHAUPT WM-G10/2-A - Izvedba: ZM-LN - Moč: 75-630 kW - Leto izdelave: 2021 4. WEISHAUPT WM-G10/3-A (z dovodom za plin) - Moč: 125-900 kW - Izvedba: ZM-LN Nodpjwgyrtofx Ah Uolb - Leto izdelave: 2011 5. WEISHAUPT WM-G10/3-A (z dovodom za plin) - Moč: 100-1000 kW - Izvedba: ZM - Leto izdelave: 2011 6. WEISHAUPT WM-G10/3-A (z dovodom za plin) - Moč: 100-1000 kW - Izvedba: ZM - Leto izdelave: 2009

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, moč: 10 kW (13,60 KM), vhodna napetost: 400 V, potovalna razdalja osi X: 4.050 mm, pomik osi Y: 2.560 mm, pomik po osi Z: 280 mm, dolžina obdelovanca (maks.): 3.120 mm, širina obdelovanca (maks.): 2.160 mm, višina obdelovanca (maks.): 105 mm, število osi: 4, število mest v zalogovniku orodij: 16, Oprema: CE označba, For sale is a highly equipped CNC machining center: FORMAT-4 profit H10 22.32, year of manufacture 2015. This machine is ideally suited for precise machining of wood, MDF, plastics, and panel materials. The FORMAT-4 H10 impresses with high traverse speeds and a robust design. Notable features include the powerful 10 kW HSK-F63 spindle, a 360° C-axis, and a total of 16 tool positions. Technical Data: * Manufacturer: FORMAT-4 * Model: profit H10 22.32 * Year: 2015 * Machine type: CNC machining center Working area * X-axis: 3,120 mm * Y-axis: 2,160 mm * Z-axis: 105 mm Traverse paths * X: 4,050 mm * Y: 2,560 mm * Z: 280 mm Traverse speeds * X/Y: 100 m/min * Z: 30 m/min Milling spindle * 10 kW HSK-F63 spindle * Speed range: 1,000 – 24,000 rpm * Right- and left-hand rotation * Ceramic bearings * Air-cooled Tool changer * 2 tool changers with a total of 16 tool positions * HSK-F63 holders * Tool positions on the machine stand and arranged laterally Additional units * C-axis 0–360° Vacuum / Table * Matrix/grid table * 2 vacuum pumps, each 250 m³/h * Two stop rows Nedpey Smi Asfx Ah Uelb Control / Software * FORMAT-4 H10 control * WoodFlash software * DXF import * 3D graphical display * Parametric programming * Tool database for up to 500 tools * Mobile operating panel * Handheld terminal Additional equipment * Automatic central lubrication * UPS for the control computer * Network/internet preparation * Central extraction system * Preparation for boring head * Operator tools and documentation available Condition: Machine currently in operation, well maintained. Inspection by appointment possible.

Stanje: rabljeno, Leto izdelave: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical system 3x400V 50/60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable height-adjustable extraction hood – motorized control - Full nominal power at approx. 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Drive: 3-phase high-frequency motor, inverter-controlled - Rotation direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Max. saw blade Ø 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools), featuring digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made of thick-walled, electro-welded box sections. The steel ribbing inside the frame ensures high stability. - Machining area H350 16.30: Travel axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm pass-through height Nedpfxsy Ih Rgj Ah Uelb Axis positioning speeds: Depend on the selected safety system (see layout for details). - Dual-drive gantry - X-axis guidance system: The drive for the X-axis gantry is via a rack-and-pinion with helical crowned teeth – ensuring maximum precision. The reduction gearbox provides the highest machining and repeat accuracy. Bearings are precision, encapsulated ball bearing carriages running on hardened and ground linear guides. - Y-axis guidance system: Bearings are precision, encapsulated ball bearing carriages running on hardened and ground linear guides. The Y-axis is positioned via a ground ball screw. - Z-axis guidance system: Bearings are precision, encapsulated ball bearing carriages running on hardened and ground linear guides. The Z-axis is positioned via a ground ball screw. - Automatic central lubrication system: Grease is automatically and precisely delivered to the guide carriages of the X, Y, and Z axes as well as to the ball screws of Y and Z. Lubrication cycle is performed automatically after a defined interval. - 12-position linear tool changer on the left of the machine frame including a pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and provides sufficient space for milling tools. One aggregate station (configuration options, see layout). Max. tool diameter: 250 mm Max. tool length: 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in X-direction and 5 spindles in Y-direction. Horizontal 6 spindles: 4 spindles in X-direction and 2 spindles in Y-direction. Stroke = 70 mm Max. drill bit length = 70 mm, shank diameter = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – X-direction Max. saw blade diameter: 120 mm Max. bla...

Stanje: novo, Factory-new electric actuator from the renowned German manufacturer AUMA. Professional device designed for industrial automation, suitable for operating gate valves, valves, dampers, and industrial fittings. The actuator is in warehouse condition – unused. Equipped with a manual emergency handwheel and a robust industrial housing with a high IP67 ingress protection rating. Nameplate data – actuator: • Manufacturer: AUMA • Type: SAR 07.5-F10 • Comm. No.: 194452 • No.: 0402ND90010 • Protection class: IP67 • Output speed: 45 rpm • Closing torque (T Zu): 30–60 Nm • Opening torque (T Auf): 30–60 Nm • Lubrication: F1 • Operating temperature: -25°C to +60°C Nameplate data – motor: • Motor type: AD0R 63-4/80 • Article No.: Z011.859 Nlodpfx Ahey Skm Eo Ueb • No.: 0402NM31789 • Supply voltage: 3~ 400V • Frequency: 50 Hz • Power: 0.37 kW • Current: Y 1.7 A • Cos φ: 0.58 • Operating mode: S4 – 25% ED 1200 cycles/h • Protection class: IP67 • Motor speed: 1400 rpm • Thermal protection: TH • Insulation class: F Application areas: • industrial automation • industrial fittings • gate valves and dampers • water supply installations • energy sector • technological systems Condition: new / warehouse stock The price refers to 1 unit.

Stanje: novo, Profesionalni industrijski polžasti reduktor priznanega proizvajalca AUMA. Njdsy Sitwopfx Ah Uelb Naprava je povsem nova, skladiščena, v zelo dobrem tehničnem in vizualnem stanju. Masivna in robustna konstrukcija, namenjena uporabi v industrijskih inštalacijah, armaturah, ventilih, loputah ter v težkih pogonskih sistemih. Tehnični podatki: * Proizvajalec: AUMA * Tip: GF 125.3 * Različica: RR * Prenosno razmerje: i = 208:1 * Vhodni navor: 53 Nm * Izhodni navor: 4000 Nm * Zaščita: IP67 * Temperaturno območje delovanja: od -25°C do +80°C * Mazanje: F1 * Gred z utorom za pero * Masivno industrijsko ohišje Uporaba: * pogoni za ventile in lopute * industrijske inštalacije * energetika * vodovod in čistilne naprave * industrijska avtomatizacija * cevovodni sistemi Stanje: novo, skladiščno. Cena velja za 1 kos.

Stanje: rabljeno, Leto izdelave: 2016, Delovno polje: X=3300 mm Y=1280 mm Z=150 mm Višina prehoda Upravljalni terminal: 24" barvni LED zaslon Ročni terminal za upravljanje hitrosti osi Programska oprema: "Woodflash" Vakuumska črpalka 90 m³/h/50 Hz oziroma 108 m³/h/60 Hz Rezkalno vreteno 12 kW HSK F63 (12.000 vrt./min) 12-pozicijski linearni menjalec orodja na levi strani stroja + pick-up prostor Vrtalna glava DH 16 4H 2S: 12 navpičnih vreten 4 vodoravna vretena 2 utorni žagi Lokacija skladišča: Nattheim Nedpfsxy Tlwex Ah Uslb

Stanje: zelo dobro (rabljeno), Profesionalni knjižarski vrtalnik priznane nemške družbe Constantin Hang Maschinenfabrik Göppingen. Model 114-4 je opremljen s 4 vrtalnimi glavami, namenjenimi za natančno vrtanje papirja, dokumentacije, katalogov, koledarjev in drugih tiskarskih materialov. Stroj se uporablja v: • tiskarnah, • knjigoveznicah, • grafičnih delavnicah, • proizvodnji registratorjev in katalogov, • pripravi tehnične dokumentacije. Trdna nemška konstrukcija zagotavlja visoko natančnost delovanja in dolgo življenjsko dobo. Tehnični podatki: • Proizvajalec: Constantin Hang Maschinenfabrik • Model: 114-4 Nljdpfx Ahjy Nm A Re Usb • Število glav: 4 • Nastavljiv razmak glav • Nastavljiva delovna miza • Noga za upravljanje – pedal • Zaščitni pokrov • Proizvedeno v Nemčiji

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.280 mm, skupna širina: 390 mm, skupna višina: 40 mm, 120 pcs. Shelves approx. 128 x 39 x 4 cm, SSI Schäfer R3000, Second Choice (New Item) Shelf Racking, Workshop Racks, Storage Racks, Manual Storage, Boltless Shelving, Small Parts Storage B40/392/70, ZB341315, ZB9414 Specifications: - Length: approx. 128.1 cm - Width: approx. 39 cm - Height: approx. 4 cm - Quantity: 120 pcs. shelves SSI Schäfer R3000 - Load capacity: max. 100 kg per shelf - Surface: Sendzimir galvanized - SECOND CHOICE (NEW ITEM) (This is a second-choice product, new and unused. Second choice means that dust deposits, minor scratches, or slight soiling may be present.) - Ex stock Wietmarschen Price: €960.00 net €1,142.40 gross You will receive an invoice with VAT shown separately. Nlsdjy Uhrwepfx Ah Ujb Shipping: Delivery is available upon request via our partner freight forwarder. Shipping costs depend on the postal code. Assembly: Our trained staff is happy to provide professional assembly and disassembly of your facility upon request. Our recommendation: Let us know your requirements... We are happy to assist you with implementing your projects, from planning through ordering to installation.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.310 mm, skupna širina: 390 mm, skupna višina: 40 mm, 120 pcs. Shelf Panels approx. 131 x 39 x 4 cm, SSI Schäfer R3000, Grade II (New Goods) Shelving Racks, Workshop Racks, Warehouse Racks, Hand Storage, Boltless Shelving, Small Parts Storage B40/392/70, ZB341315, ZB9414 Data: - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Quantity: 120 pcs. shelf panels SSI Schäfer R3000 - Load capacity: max. 100 kg per shelf panel - Surface: Sendzimir galvanized - GRADE II (NEW GOODS) (This item is a Grade II product, new and unused. Grade II means there may be dust deposits, minor scratches, or soiling.) - Available from stock Wietmarschen Price: €960.00 net €1,142.40 gross You will receive an invoice with VAT shown separately. Transport: Delivery is carried out upon request by our partner forwarding agent, costs depend on postal code. Assembly: Nljdpfjy Uhqyex Ah Uob Our trained staff are happy to assist you with the professional assembly and disassembly of your operating equipment if required. Our recommendation: Let us know your requirements… We are happy to support you with the realization of your projects, from planning and ordering through to assembly.

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 5 h, Funkcionalnost: popolnoma funkcionalen, Heli electric forklift, very robust, no unnecessary electronics Equipped with sideshift, lighting, indicators, rear-view mirror, overhead guard, trailer coupling, and power steering. Solid rubber tires at the front, pneumatic tires at the rear. Nljdpfsv A Rq Tsx Ah Ujb Comes with charger. Length: 2,200 mm Width: 1,120 mm Height: 2,130 mm Lift height: 3,000 mm Total weight: 2,935 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm Nsdpfjfdkb Tsx Ah Uslb - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. Nljdpjd Tqalsfx Ah Ueb When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) Nsdpfx Aofdkb Ujh Ujlb - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. Nedpfx Aeguk A Hoh Uolb The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. Nodpeguk Dksfx Ah Ujlb The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. Nodpfjfdkbhox Ah Uslb The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 9.150 kg, nosilnost na odsek shranjevanja: 3.050 kg, skupna dolžina: 22.800 mm, skupna višina: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 22.800 mm, 4 dvopolna paletna regala (M35112711-3) vsak 5,7 m dolg, 3,5 m visok, 1,1 m globok, Nlsdpsyz Iccjfx Ah Ueb vsak s 2 polji, širokimi 2,7 m, vsak s 3 nivoji prečk, nosilnost na polje 3000 kg. - 12 okvirjev (RM3511 - RAL5019) - 24 talnih plošč, podlag, pritrdilni material - 48 talnih sider (ZZBA1210) - 48 posameznih prečk (T2711 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so vijačeni, ne predmontirani Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže - razklad tovornjaka izvaja kupec z lastno dvižno opremo - dobave po celotni Nemčiji, razen otokov! Dobave v EU države po individualnem dogovoru.

Stanje: rabljeno, Premer različni Nlodexyzxfepfx Ah Ujb Količina: 44x Vpenjanje: SK 40

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, skupna dolžina: 71.000 mm, skupna višina: 4.000 mm, razmak između stupova: 2.700 mm, višina police: 4.000 mm, število vrst polic: 7, nosilnost: 6.000 kg, višina okvirja: 4.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, Paletni regalni sistem 4 m visok, na polje 2 prečkinski ravni (svetlina 2700) Obseg: 32 okvirjev 4 m visokih 128 talnih sider 18 zaščitnih kotov proti naletom 100 prečk dolžine 2,7 m, višina 0,11 m 150 mrežastih polic 89/110, nosilnost 1000 kg 7 tablic z nosilnostjo Dobava na gradbišče brezplačno Okviri privijačeni, ne predmontirani Prevoz / Dobava: - največ 20 delovnih dni po prejemu plačila - dobava brezplačno na gradbišče / mesto montaže Nljdpfx Aoyyny Esh Ueb - raztovarjanje s tovornjaka opravi kupec z lastno dvižno napravo - Dobave se izvajajo po celotnem območju Zvezne republike Nemčije, razen otokov! Dobave v države EU po individualnem dogovoru.

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, moč: 18 kW (24,47 KM), vhodna napetost: 400 V, vhodni tok: 40 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, Oprema: CE označba, dokumentacija / priročnik, Ponujamo to rabljeno obdelovalno središče FORMAT-4 PROFIT H200R 13.33 s prehodom, letnik 2022. Tip: PROFIT H200R 13.33 Serijska številka: 30B.05.067.22 Koda: 9417 Nazivna napetost: 400,0 V Število faz: 3P+N Frekvenca: 50/60 Hz Nlodpfsyvtq Uex Ah Ujb Nazivni tok: 40,0 A Moč: 18,0 kW Leto izdelave: 2022 Krmilna napetost: 24 VDC Minimalno varovalo: 32 A Maksimalno varovalo: 50 A Minimalni zračni tlak: 8 bar Poraba zraka: 350 Nl/min Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2001, DDS vlažilnik Nlodpfxjyx A S Ho Ah Ueb Hitropritrditvene tirnice Technotrans hlajenje in kroženje Brez obračanja Števec izpisov: 42 milijonov.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Komorna pečica za pladnje 400 x 800 mm, 15 nivojev, s 3 vozički. Nlsdpfoy Dfmkjx Ah Usb