Binder Gmbh Fed 400 nakup rabljenega (78.044)

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16501575, volumenski pretok: 4.800 m³/h, vhodna napetost: 380 V, moč: 2,5 kW (3,40 KM), Oprema: Na voljo je tipska ploščica, The dirt particles, emulsion and oil mist, as well as smoke generated are captured directly at the source and guided through the individual filter stages. The separated liquid collects at the bottom of the device and can be returned to the machining center via the siphon. In the first filter stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filter stage captures the majority of the fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the level of contamination. The third filter stage consists of a large-area particulate air filter of class H13. A consistent high efficiency of 99.95% for particle sizes from 0.3μ DOP is ensured here. Type testing according to DIN EN 1822-1 H13 permits the recirculation of the filtered air back into the workspace. Bdedpfxsyz Sn No Agtjb

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 39 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MZ-7321/19 / 11024, skupna višina: 2.198 mm, skupna širina: 1.648 mm, skupna dolžina: 3.500 mm, skupna masa: 3.500 kg, premer rotorja: 400 mm, širina rotorja: 850 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, največja hitrost vrtenja: 100 obr/min, moč: 30 kW (40,79 KM), Kot novo enovalni rezalnik / drobilna naprava z manjšimi sledmi uporabe. Uporabljena samo za testne namene. Gred rotorja je opremljena s površinskim oklepom. Kasetni sistem za rotorske nože 34 x 34 mm. Elektromotor 30 kW, skupna inštalirana moč 37 kW, hidravlična moč 3,75 kW, 400 V, 3-fazni. Poleg tega so na voljo novi rezalni noži za rotor in stator kot rezervni deli. Navodila za uporabo v nemščini. Statorski noži so tridelni in nastavljivi. Lijak je zaprt, perforirana plošča 40 mm. Stroj je možno prikazati pod napetostjo. Po nakupu ni garancije. Prosto nakladanje iz obrata – Raesfeld. Podrobne slike so na voljo na zahtevo. Pridržujemo si pravico do vmesne prodaje. Cene so neto. Bsdpfjy E S S Aox Agtjdb

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna širina: 512 mm, skupna višina: 1.952 mm, skupna dolžina: 772 mm, Direct from the manufacturer, the original from Apfel GmbH. Fully assembled, including: Bedpfx Aouvigpogtedb - 2 shelves KRB 4700 - 1 storage bin KEN 6422 (No. 62) - 2 storage bins KEN 4322 (No. 42) - 1 waste bin made of galvanized sheet metal - 2 brooms - 1 hand brush - 1 dustpan - 1 set of shadow boards - 1 compartment for cleaning agents - 4 swivel castors with locking brakes Load capacity: 400 kg Dimensions: 512 W x 1,952 H x 772 D (mm) Frame powder-coated in black-grey RAL 7021 (body) Various versions and custom solutions available—we as the manufacturer are happy to support you with your requirements! (See pictures 3+4)

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Ponujamo nov stroj LOWA GmbH Abfüll- und Verschließsysteme WK12-17 za polnjenje in zapiranje steklenic, letnik 2025. Proizvajalec: LOWA GmbH Abfüll- und Verschließsysteme Model: Zapiralni stroj WK12-17 Tip stroja: Stroj za polnjenje in zapiranje steklenic Bedjyybh Aepfx Agtjdb Letnik izdelave: 2025 Stanje: novo ID kategorije: 679 Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, moč: 2.500 kW (3.399,05 KM), vhodna napetost: 380 V, vhodni tok: 53 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, stiskalna sila: 250 t, dolžina mize: 4.050 mm, leto zadnje generalne obnove: 2007, Oprema: dokumentacija / priročnik, We are offering this used Eisen u. Hammerwerk GmbH – EHT EHPS 25-40 press brake (hydraulic press brake/bending press) for sale. Immediately available. Ready for operation. Being sold due to replacement with a new machine. Specifications: - 250 t pressing force Bdodpfx Aoy D Sy Rjgtjb - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Supplied with various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Capacity: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Current type: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require further information, please feel free to contact us by message or give us a call. Machine location: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and modifications.

Stanje: rabljeno, “FED” continuous breading line Type: Crumb breader Bdedpfx Agsy Dqw Uotjb for dry coatings entirely stainless steel belt width: 400 mm infinitely variable speed minimum 300 g coating product adjustable angle from 0 to 8° dimensions (L x W x H): approx. 4,400 x 1,450 x 1,800 mm + Infeed conveyor belt width: 300 mm inclined screw conveyor

Leto izdelave: 2016, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, V primeru vprašanj me lahko kadar koli kontaktirate po e-pošti. Bdodpfx Agoya H Uyotob Lokacija stroja je v Laupheimu.

Leto izdelave: 2020, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, gradbena višina: 2.200 mm, število vreten: 3, zahteva za prostor dolžina: 5.000 mm, potrebna širina: 5.500 mm, številka stroja/vozila: 50844458, stopnja avtomatizacije: samodejen, proizvodna zmogljivost: 3.000 enota/h, We are offering this used PIA Automation production line for surgical disposable masks, year of manufacture 2020. The line was operated for only 2.5 years in single-shift operation and its condition can be described as "very good." In addition, the production line includes an integrated compressed air supply as well as a packaging and shrink-wrapping unit. The buyer will also receive raw materials sufficient for the production of approximately 300,000 surgical disposable masks. Year of manufacture: 2020 Operating pressure (pneumatics): 6.0 bar Operating voltage: 3P/N/PE 400V AC 50 Hz Bdodpfxjy Ddnmj Agtsb Supply line circuit protection: 25 A Short-circuit rating: < 10 kA Concept: The line consists of a total of three modules, connected via conveyor belts. In the first segment, the individual consumables are fed by rollers, folded, the nose clip is integrated, welded, and then cut to the correct length. The finished masks are then transported to the next modules via a step conveyor and transport belts. These modules are arranged in parallel, where the ear loops are automatically fed and welded to the masks. If you have any questions or need further information, feel free to send us a message or give us a call.

Stanje: dober (rabljeno), Leto izdelave: 2013, moč: 4 kW (5,44 KM), obratovalni tlak: 10 letvica, Oprema: hladilni sušilnik, Schneider Unimaster batni kompresor UNM STS 660-10-500 XSDK 2 cilindra, zvočno izoliran, Sesalna zmogljivost 660 l/min, Dobava 520 l/min, 10 barov, Motor 4 kW, 380 V, 50 Hz, Prostornina rezervoarja 500 litrov, popolnoma opremljen z: Hladilni sušilnik DK 600 ECO, Bdodpfx Asy E Iz Togtob Separator olje/voda ÖWAMAT 10, Samodejni izpust kondenzata ECOMAT, Predfilter in fini filter, kot videno, lokacija Seevetal, Vmesna prodaja pridržana

Stanje: rabljeno, Leto izdelave: 1994, Mehanska enota za sortiranje in transport Bdjdewtnl Ujpfx Agteb

Stanje: rabljeno, Odstranjevalec oljne megle, separator emulzijske megle, rabljeni stroj Proizvajalec: IFS Industriefilter Service GmbH Bodpfx Agoyn Rmiotsdb Tip: IFM 2000 Skupne mere: Širina: 1170 mm Globina: 700 mm Višina: 1100 mm Teža: 136,5 kg Leto izdelave: 1995 Električni podatki: 400V, 1,5 kW, 3,2 A Velikost filtra: 605 x 615 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Vertical Broaching Machine VADARI GmbH TYPE SRM 2027 – 60 kN – New Machine – BROACHING MACHINES MADE IN GERMANY. ==> Info for manufacturing companies or dealers with in-house production: Drawings, rights, spare parts, customer and prospect data, planning and production documents (including options for a 9-ton pulling force variant) for the broaching machine can be purchased from us if required. If interested, please contact us. —Currently available at special conditions— ==> We will soon have another used machine available that is currently being overhauled. If interested, please contact us promptly. This machine can be offered under highly attractive conditions. ==> Our new machines are built to order upon request. Fast production and delivery are possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special needles for internal splines, etc.) and accessories are available. Please inquire separately for these. With our broaching machine, all broaching tools and setups from other manufacturers can also be used without any issues! Full manufacturing and assembly take place at our plant in Germany. Additionally, we offer spare parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears, as well as all other necessary components – including electrical parts). Vertical Broaching Machine Type SRM 2027 – NEW MACHINE: The primary application is the production of keyways from 3–28 mm (and beyond), as well as profiles of similar dimensions. The compact, space-saving machine can be successfully used in small, medium, and large enterprises. The low price makes it viable even for small batch production and one-off manufacturing. Drive is via a pole-changing geared brake motor. The maintenance-free double-spindle drive ensures smooth operation, a central pulling point, and constant cutting performance. The open tool table allows even large workpieces to be easily positioned. In most cases, the workpiece does not need to be clamped firmly. Stroke adjustment is via adjustable limit switches with stroke limitation. For short hubs/workpieces, several workpieces can be stacked. Broaching needles, mandrels, and spare parts available on request. Technical Data: Pulling Force: 60 kN at 3 m/min, 40 kN at 6 m/min Broaching Speed: 3 m/min & 6 m/min (Optional: stepless speed adjustment 0–6 m/min possible with extended electronics) Return Speed: 6 m/min Stroke: 1050 mm Maximum Broaching Tool Length: 1200 mm Workpiece Diameter: unlimited Work Table: 450 × 350 mm Bjdpfx Agjuqbnhjtedb Table Opening: 140 mm Weight: approx. 510 kg Floor Space: 750 × 570 mm Total Machine Height: 1510 mm Drive Power: 3.7 / 4.4 kW Electrical Equipment: 400 / 230 Volt, 50 Hz Control Voltage: 230 Volt Operating Voltage: 400 Volt, 50 Hz Finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 Safety Door: Standard equipment Coolant system: Standard equipment The machine complies with the current Machinery Directive and bears the CE mark.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21_0346, NEW – UNUSED High-performance positioner for manual or robotic welding – lifting and rotating device. Bdodpfsurlcrsx Agtjb Special equipment for specific applications, designed and manufactured by FÖRSTER Welding Systems GmbH. Maximum workpiece diameter: 2500 mm Maximum workpiece weight: 20 tons Dimensions of the welding positioner: 7000 x 3000 x 3750 mm Weight (without counterweight): 20,000 kg Overall dimensions of the entire system: 8900 x 4800 x 3750 mm Total weight of the entire system: 40,000 kg Counterweight included in the scope of delivery. Complete documentation available. Technical support from the manufacturer is available upon request. The machine is located in central Poland.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Leto izdelave: 2018, Naprava za proizvodnjo endogenega plina Leto izdelave: 2018 Nova cena: 103.500,00€ neto Bodpfxsx An Rmj Agtodb Proizvajalec: Hammer GmbH Tip: Larus ENDOGEN-40-1,05-E vključuje regulacijo rosišča ali cp Popolnoma avtomatska regulacija zmogljivosti v območju od 50-100% Filter za saj v duplex izvedbi

Leto izdelave: 2020, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Sušilnik je namenjen predvsem sušenju blata iz čistilnih naprav ali substrata iz bioplinskih naprav. Material, ki se vnese v sušilnik, vrtinčijo metalne gredi v sušilni komori. Dimni plini iz motorja z notranjim izgorevanjem obdajajo material in povzročajo izhlapevanje vode. Dnevni pretok ca. 10 t. Sušilnik se prodaja z vsemi pomožnimi napravami, kot so polžna dvigala, krmilna omara, dodatni gorilnik, črpalka za kislino, lopute za dimne pline ipd. Podrobnosti z veseljem osebno. Možen demontaža in dostava. Proizvajalec je na voljo za ponovno zagon. Bodpfx Aoyx Iztogtsdb

Stanje: rabljeno, Trivaljni valjar za testo Bsdey Akd Eepfx Agtjdb

Leto izdelave: 1999, stanje: dober (rabljeno), Funkcionalnost: omejena funkcionalnost, !!! Important!!! The systems have now been dismantled. The system components can be inspected on site. For sale here are 2 fully functional SLC (Surface Like Chrome) vacuum coating systems / metallization units manufactured by PVT GmbH. A 3rd non-functional system is no longer available for sale. Complete documentation for the systems is available in paper form and will be handed over upon purchase. In order to operate the systems, a compressed air supply, power supply, and water cooling system are required and must be provided by the buyer. All other PVT processes are, of course, possible as well. The system was primarily used for processing wheel rims. Treatment of other workpieces made of aluminum, steel, or plastic is also possible, such as bathroom/kitchen fittings, motorcycle and automotive add-on parts, door and window handles, etc. What are the advantages of the SLC process compared to conventional chrome plating: - SLC coating is a high-gloss finish optically comparable to electroplated chrome - Significantly more resistant to scratches and chipping - The process is more environmentally friendly and provides outstanding corrosion resistance - Costs are considerably lower Bdedpfeyzdm Rex Agteb Technical data: Chamber internal dimensions approx. 1600 mm diameter, approx. 900 mm height Type: PVT 1600 SLC Manufacturer: PVT GmbH Year of manufacture: 1998/1999 Documentation: available Control: Allen Bradley PLC (automatic coating process including hardware)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 21 A, vrsta vhodnega toka: Enosmerni tok, volumenski pretok: 6.045 m³/h, skupna masa: 1.100 kg, ODSESOVALNIK ALKO ECO JET 60/5 HD Odvod žagovine, odvod prahu, samočistilni filter, podtlak ALKO ECO JET Filter se pnevmatsko čisti z impulzi stisnjenega zraka med delovanjem, kar zagotavlja visoko učinkovitost naprave. Bedpsyrqnzofx Agtjdb Idealen za vse vrste suhega prahu pri različnih tehnoloških postopkih. Možna je menjava filtrirnih vreč glede na zahteve in namen uporabe.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 140 kg, skupna dolžina: 900 mm, skupna širina: 800 mm, skupna višina: 2.000 mm, vhodna frekvenca: 50 Hz, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of lasers has become indispensable in many industries. Bdjdpfx Agjxuvk Eotsb The powerful laser software enables the creation of text, numbers, 2D codes, QR codes, and logos with just a few clicks and little programming knowledge. The software automatically increments serial and article numbers as preset. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically insert them into predefined fields. Using a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optional larger) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal light for operating status display • Max. workpiece height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / door height (pass-through): 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.064 mm, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 800 mm, skupna višina: 2.000 mm, skupna dolžina: 900 mm, skupna masa: 100 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, vhodni tok: 16 A, potrebna širina: 800 mm, valovna dolžina laserja: 1.064 nm, delovna višina: 900 mm, zahteva za prostor dolžina: 900 mm, vrsta laserja: vlakenski laser, Oprema: odsesavanje hlapov, The universal LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on the requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, laser-based permanent marking has become essential. The powerful laser software enables you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be incremented automatically by the software after initial set-up. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a hand scanner is also possible. Bedpfx Ageywg Sbstodb The standard equipment includes a laptop with mount, Windows operating system, and laser software. Optionally, the LAS 28 XL laser marking system can be outfitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, adjustable Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (optionally larger) • Marking software: EZCAD in German / English • Signal lamp to display operating status • Optional: Rotary axis (3-jaw chuck) • Optional: Digital height measuring system • Optional: Fume extraction (incl. activated carbon filter) • Optional: Extensions for large components (one-sided or double-sided) • Optional: Autofocus system • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Maximum component height: approx. 300 mm • Electrically adjustable Z-axis • Laptop with mount and Windows operating system • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): approx. 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 100 kg

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F50, For sale is a FiberFlow F50 cooling die by DIL Engineering GmbH – a specially developed solution for structuring alternative proteins in High Moisture Extrusion (HME). This cooling die is ideal for use in research and development, enabling the targeted production of fibrous, meat-like textures that are particularly in demand for modern meat and fish alternatives as well as for snacks and convenience products. The FiberFlow F50 is designed for a throughput of up to 50 kg/h and features a rectangular geometry for optimal flow guidance and fiber formation. The system is modular and can be configured with one or two segments as required. In addition, one or two separate cooling circuits are available, ensuring precise temperature control for consistently high product quality. Integration of inline measurement systems is possible, allowing continuous process monitoring and optimization. Bdsdpfsy D Hrbjx Agtob Special attention has been paid to hygienic design, ensuring the system meets the stringent requirements of the food industry. Thanks to its well-designed construction, cleaning is straightforward and quick, which is a particular advantage for development operations. The FiberFlow F50 is ideally suited for pilot trials, product development, and recipe optimization in the field of alternative proteins, and can be easily integrated into existing extrusion lines.

Stanje: novo, Naprodaj profesionalni močnostni krmilnik (tirostrski) Advanced Energy iz serije Thyro-A. Naprava je NOVA – nikoli uporabljena (skladiščno ohranjena). Industrijska oprema visoke kakovosti, primerna za napredne proizvodne instalacije. 🔧 Tehnični podatki: Bodjyw T Ipepfx Agtjdb Proizvajalec: Advanced Energy Model: Thyro-A 3A 400-350 HF RL3 Napetost: 400 V Tok: 350 A Izhod: Relay Out 4A / 250V Tip: tiristorski (SCR) krmilnik ⚙️ Uporaba: industrijske peči grelni sistemi industrijska avtomatizacija močninsko upravljanje v proizvodnih linijah 📦 Komplet vsebuje: 3x modul Thyro-A industrijsko ohišje / hladilnik hladilni ventilator komplet kot na slikah ✅ Stanje: NOVO – neuporabljeno Možne minimalne sledi skladiščenja. Popolnoma delujoč.

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 7.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DRI 04320080, prevoženi kilometri: 100 km, skupna masa: 7.000 kg, vrsta goriva: dizel, barva: modra, obratovalna teža: 14.000 kg, največja dovoljena obremenitev: 15.000 kg, stanje verige: 50 odstotek, Premer palice (maks.): 61 mm, Premer cevi (maks.): 400 mm, Oprema: gumene gosenice, hidravlično kladivo, kabina, German horizontal drilling rig for boreholes up to 200 meters in length, with a thrust/clamping force of 15 tons plus percussion (28 tons) from a hydraulic hammer. Rubber tracks, maximum speed 3 km/h. Suitable for installation of pipes up to Ø 400 mm underground. Drilling depth up to 5 meters with wireless navigation. Manufacturer: TRACTO-TECHNIK GmbH & Co, Year: 2004, 7,800 operating hours. Main components and assemblies: - Hydraulic-driven carriage for rods, HATZ 4-cylinder diesel engine, operator cabin - 3 rod boxes (each box contains 48 rods x 3 m) = 144 rods (432 meters) Operating options: 1. Rod manipulator for automated rod handling 2. Semi-automatic rod clamping/pulling system Mixing unit (8056D) with hydraulic powerpack (TT-M2), DRI 8904.B DEUTZ 4-cylinder diesel engine, bentonite pump R-72, two bentonite preparation tanks of 4,000 liters each, two BÖRGER rotary pumps for mixing Bsdpfx Agey H H Uuetsdb Connecting cable to mixing unit Bentonite hose reel 2 drilling heads Ø110 reamer, 5t swivel Reamers Ø280 with swivel, Ø315 with swivel, Ø385 with swivel Eclipse navigation system New spare working components (adapter, shaft, bushing) Price incl. VAT.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, Glaslift 400 – zewnętrzny podnośnik do szyb, Glasheber, Glaslift, dźwig, Uplifter, Winlet, Glassrobot Manipulator do szkła, okien, blach – podnośnik, dźwig - rok produkcji: 2014 - maksymalny udźwig: 400 kg - jedno automatyczne wysunięcie ramienia - funkcja obrotu - 4 przyssawki - napęd elektryczny - dwie baterie - wbudowana ładowarka Cena eksportowa Możliwość transportu (tylko po oględzinach lub wpłacie) - stan widoczny na zdjęciach Cena eksportowa Bdsdpfx Aovwbfqsgteb Lifter do obejrzenia w Polsce – Piwniczna Zdrój – 120 km od Krakowa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the enhanced safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-grade safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. It is a fully functional, tested unit that originally had transport damage to the housing. This was professionally repaired and repainted. Technically flawless – visually in very good condition 100% functional – no restrictions Price advantage: €1000 cheaper than comparable units Special Added Value: The device is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire / flames, no explosion). What exactly can the unit do? (Section 2 – Performance & Applications) - Conducting aging tests on lithium-ion cells - Performance tests (charging/discharging cycles at temperature) - Continuous temperature runs and temperature cycling tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the usable chamber - Safe execution of tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test labs and safety test facilities - Automotive / E-Mobility / Energy storage The P Plus package turns the KB 720 into a true battery safety test chamber: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Fire detector with visual & audible alarm - Mechanical double-door locking (safe containment) - Spark protection in the interior Bjdsyyw E Repfx Agtsdb - Exhaust port with reversible overpressure flap - Connections for external inertization (e.g., nitrogen) - Emergency shutdown / manual triggering of extinguishing system - Feedthroughs for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur, but without explosion or uncontrolled propagation. Not for abuse or destructive testing, but a safe, standards-compliant test chamber for real-world operational and fault scenarios. Key Technical Data: - Temperature range: –10 °C to +100 °C - Internal volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse protection: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm - Weight: approx. 285–300 kg In Summary – Why this Device is Special: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market & resale appeal Documents & Downloads Condition: used Scope of delivery: (See pictures) (Technical data subject to change and errors excepted!) Further questions can be answered for you by phone.