Arburg Thermolift 200 nakup rabljenega (17.116)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 9.171 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, proizvajalec krmilnikov: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1,600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances operator comfort. Take advantage of this opportunity and purchase this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Advanced two-stage clamping program • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • Highly wear-resistant design • Sintered metal check ring • CrN coating on screw and backflow ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics Kljdpfxoyg I Ihe Al Nor • Technology level 2 – servo-controlled dual-circuit pump system: • Two regulated hydraulic pumps enable precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control: • Touchscreen operation with process editor • 15-inch display (38.1 cm) • Multilingual user interface (German, English, local language) • Heating power zones 1–6: each 3.6 kW (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Operating hours: 9,171 Additional equipment • Not included in the listing • Note: The machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 54.454 h, premer vijaka: 25 mm, Stroj Arburg 470 H 1000-170 je bil izdelan leta 2014. Gre za hidravlično brizgalno maso s zapiralno silo 100 t in premerom polža 25 mm. Deluje pri 400 V 3~, 50 Hz s skupno priključno močjo 75 kW. Idealen za natančne brizgalne aplikacije. Za več informacij o tem stroju nas kontaktirajte. • Polž: 25 mm • Obratovalna napetost: 400 V, 3-fazno, 50 Hz • Krmilna napetost: 230 V, 50 Hz; 24 V AC Ksdpfx Ajx D Rcuel Njlr • Nazivni tok motorja: 80 A • Nazivni tok grelca: 58 A • Skupni nazivni tok: 138 A • Skupna priključna moč: 75 kW • Leto kalibracije: 2027 • Opcijsko: Geiger ravnanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, vpenjalna sila: 1.600 kN, skupna masa: 5.900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force of up to 1600 kN. The machine comes equipped with a take-out robot and an enclosure with a FilterFanUnit that ensures clean operation. It is ideal for precision plastic processing and offers a mold height of 250 mm and a platen spacing of 825 mm. Contact us for further information about this machine. Additional Equipment • Cooling water connection: Max. temperature: 30°C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Highlights: • Thermoplastic cylinder: 45 mm, highly wear-resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry Kedpfox D E Dyox Al Nelr • Open nozzle, 45 mm • Larger hold pressure pump • Selogica direct control system • Technology level 2, servo-driven with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Programmable, controlled nozzle contact pressure (1st injection unit) • Central 125 mm clamping platen set • Machine raised by 100 mm (elevated oscillation elements) • 8 programmable digital inputs and outputs • 6 electrical heating control circuits for the mold • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multispline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby function • Sound pressure level: 70 dB(A) | ±3 Additional Information Screw diameter: 400 units: 35 / 40 / 45 mm Injection pressure (max.): 400: 2500 / 2000 / 1580 bar Shot weight (max. g PS): 400: 141 / 184 / 232 g Heating capacity 400: 9.7 kW | 5 zones Net machine weight: 400: 5900 kg

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements driven by servo motors, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking for a high-quality injection moulding machine, you should consider the Arburg 420A 1000-400, which we are offering for sale. Please contact us for more information about this machine. • Drive technology: • Electromechanical main movements via servo drives: dosing, injection, mould opening/closing, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine mounting platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal injection unit 400 • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing unit D25 mm, highly wear-/corrosion-resistant; open nozzle (220/25), flat nozzle tip (300/00), heating band (320/00) (Pos 060/25) • Heating band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-controlled, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mould height adjustment • Prepared for installation of a linear robot on the fixed platen • Tool protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blower unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, controlled and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, control cabinet, interfaces: • Selogica control system • Software packages (Pos 555: Advanced mechanical cycle control; Advanced movements; Production control; Optimization/operator assistance; Quality control; Documentation) • Temperature-controlled control cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mould temperature measurement zones (Pos 469/12) • Additional heating band for nozzle (Pos 468/01) • Interface for HB-Therm mould temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for colour dosing unit (Pos 493/00) Kodsx D Hgvspfx Al Nolr Additional equipment • Programmable electric conveyor belt (Pos 412/02) • Sorting flap for separating good/reject parts (Pos 375/00)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 37.049 h, vpenjalna sila: 4.000 kN, skupna masa: 21.000 kg, This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight of up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for high-precision plastic injection molding. Please contact us for further information on this machine. Clamping Unit • Locking force (max.): 150 kN • Opening force (max.): 100 kN / reinforced: 800 kN • Maximum opening stroke: 700 mm • Minimum mold height: 350 mm • Distance between platen faces (max.): 1050-1550 mm • Clear tie bar spacing: 820 × 820 mm • Mounting platen dimensions (W × H): 1171 × 1171 mm • Maximum mold half weight: 4500 kg • Maximum ejection force: 100 kN • Maximum ejector stroke: 250 mm Hydraulics / Drive / Miscellaneous • Hydraulic pump drive power: 55 kW • Total installed power: – 4000-2100: 88.9 kW – 4000-3200: 96.2 kW • Color: Plastic-coated frame (light gray / mint green / rapeseed yellow) • Control cabinets: Safety standard DIN EN 60204 • Socket combination: 1 Schuko + 1 Cekon • Power supply of injection unit: 1 × 16 A Injection Unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Theoretical shot volume (max., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Shot weight (max., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Injection pressure (max., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Injection flow rate (max., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Injection flow rate with accumulator (max., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Backpressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Screw circumferential speed (max., m/s): 0.38 | 0.28 | 0.28 • Screw torque (max., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Nozzle contact force (max.): 110 kN • Nozzle stroke (max.): 600 mm • Heating zones / heating power: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heater: 1000 W | 1250 W Dimensions and Weights (Base Machine) • Clearance length: 490 mm • Electrical connection (fuse) motor + heater: 250 A Klsdoydpvbjpfx Al Ner • Electrical connection (fuse) motor: 125 A • Electrical connection (fuse) heater: 50 / 63 A Additional Equipment • SEPRO SR AXESS 30 S3 Robot (2008)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 68.463 h, premer vijaka: 35 mm, Ta Arburg 470 E 1000-700 je bila proizvedena leta 2011. Je robusten električni brizgalni stroj z zapiralno silo 100 ton in premerom polža 25 mm. Obratuje na 400V 3~, 50Hz in ima skupno priključno moč 78 kW ter je zasnovana za učinkovito delovanje. Izkoristite priložnost za nakup tega električnega brizgalnega stroja Arburg 470 E 1000-700. Za več informacij nas kontaktirajte. • Obratovalna napetost: 400 V, 3-fazno, 50 Hz • Krmilna napetost: 230 V, 50 Hz; 24 V AC Klodox D Rndopfx Al Nor • Nazivni tok motorja: 61 A • Nazivni tok gretja: 58 A • Skupni nazivni tok: 119 A • Skupna priključna moč: 78 kW • Kalibracija (leto): 2027 • Izbirna enota: da • Posamezna plošča: da • Razdalja med stebri: 470 x 470 • Po želji: Geiger ravnanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 13.361 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, proizvajalec krmilnikov: ARBURG, This Arburg 520S-1500-400 injection moulding machine was manufactured in 2016. It features a clamping force of 1600 kN, a 45 mm screw diameter, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances user-friendliness. Take advantage of this opportunity and purchase the hydraulic Arburg 520S-1500-400 injection moulding machine. Contact us for further details. • Programmable and controlled clamping force build-up; advanced clamping program with 2 stages • Hydraulic, servo-driven ejector on moving platen • Screw diameter: 45 mm (without nozzle) • Highly wear-resistant design; sintered metal non-return ring; CrN coating on screw and non-return ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology Level 2: servo-controlled dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circuit with additional cooling and filtration • SELOGICA direct control with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) Ksdeyg I Egopfx Al Nslr • Heating power zones 1-6: each 3.6 kW (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Operating hours: 13,361 Additional equipment • None included in the list • Robot/automation ready: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robotic system

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), premer vijaka: 45 mm, Ta Arburg Allrounder 630S 2500-675 je bila izdelana leta 2003. Gre za hidravlični brizgalni stroj s premerom polža 45 mm. Razmislite o priložnosti za nakup tega hidravličnega brizgalnega stroja Arburg Allrounder 630S 2500-675. Za več informacij nas kontaktirajte. Kledpsyaizisfx Al Nor

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), skupna masa: 28.400 kg, This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. It is a robust plastics processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. The machine provides an impressive opening stroke of 900 mm and a platen size of 1280 x 1280 mm. Take advantage of this opportunity to purchase the Arburg Allrounder 920H 5000-4600 injection moulding machine. Contact us for more information about this machine. Additional Equipment • The robot and Autoline are not included. The following Piovan accessories are included in the scope of delivery: Piovan hot air dryer G35 / Piovan conveying unit PF30 / 3x Piovan temperature control unit THW118-F (+1 brand new, unused temperature control unit) Machine Advantages Kodpex U Tqrsfx Al Njlr Technical Machine Advantages • Pump operating hours: 1,769 hours, hours in automatic cycle: 695 hours • Clamping force: 5,000 kN / Injection unit: 4,600 • Opening stroke: 900 mm / Tie bar distance: 920 x 920 mm / Min-max mould height: 400-1050 mm • Platen size: 1280 x 1280 mm / Ejector stroke: 250 mm / Ejector force: 86 kN Additional Information The machine has seen very little use

Leto izdelave: 2007, obratovalne ure: 88.893 h, stanje: pripravljen za uporabo (rabljen), proizvajalec krmilnikov: HAITIAN, Ta Arburg A470 C 1500-400 je bila izdelana leta 2007. Opremljena je s haitianskim manipulacijskim sistemom, nameščenim leta 2022, zaščitno ohišje in transportnim trakom za odlaganje delov. S 88.893 obratovalnimi urami razmislite o možnosti nakupa tega hidravličnega brizgalnega stroja Arburg A470 C 1500-400. Za več informacij nas kontaktirajte. Dodatne informacije • Haitianski manipulacijski sistem • Zaščitno ohišje • Transportni trak za skladiščenje delov Klsdpfex D Rbqjx Al Nor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, vpenjalna sila: 1.000 kN, premer vijaka: 35 mm, injekcijska masa: 132 g, skupna masa: 3.650 kg, Ta Arburg Allrounder 420C 1000-290 je bila izdelana leta 2014. Ima zapiralno silo 1000 kN, hod odpiranja 500 mm in vpenjalno površino 570x570 mm. Največja brizgalna masa je 132 g. Razmislite o možnosti nakupa tega hidravličnega stroja za brizganje Arburg Allrounder 420C 1000-290. Za več informacij nas kontaktirajte. • Hod odpiranja: 500 mm Klsdpoyglrwsfx Al Nor • Velikost vpenjalne plošče: 570 x 570 mm • Maks. volumen: 144 cm³

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, premer vijaka: 25 mm, Ta Arburg 470 S 800-170 je bila izdelana leta 2010. Gre za hidravlično brizgalno stiskalnico z zapiralno silo 80 ton in razdaljo med stebri 470x470 mm. Deluje na 400 V 3~ 50 Hz in ima skupno priključno moč 76 kW. Razmislite o nakupu te hidravlične brizgalne stiskalnice Arburg 470 S 800-170. Za več informacij nas kontaktirajte. • Razdalja med stebri: 470x470 mm • Enotna vpenjalna plošča: Da Klodpsx D R Epefx Al Nor • Obratovalna napetost: 400 V 3~ 50 Hz • Krmilna napetost: 230 V ~ 50 Hz, 24 V DC • Nazivni tok motor/gretje: 76 / 59 A • Skupni nazivni tok: 135 A • Skupna priključna moč: 76 kW • Opcijsko: Geiger manipulacija

Leto izdelave: 2008, obratovalne ure: 78.723 h, stanje: pripravljen za uporabo (rabljen), premer vijaka: 25 mm, Ta Arburg 470 A 800-170 je bila izdelana leta 2008. Gre za vertikalni stroj za brizganje plastike s zapiralno silo 80 ton, ki deluje na 400 V 3~, 50 Hz. Skupna priključna moč znaša 69 kVA. Razmislite o priložnosti za nakup tega vertikalnega stroja za brizganje plastike Arburg 470 A 800-170. Za več informacij nas kontaktirajte. • Obratovalna napetost: 400 V, 3~, 50 Hz • Krmilna napetost: 230 V, 50 Hz • Krmilna napetost: 24 V~ • Nazivni tok motorja/ogrevanja: 72 A / 58 A • Skupni nazivni tok: 130 A • Skupna priključna moč: 69 kVA • Kalibracija (leto): 2027 • Izbirna enota: da • Enotna plošča: da • Razmak med stebri: 470 x 470 Ksdpoyq Rw Tjfx Al Nelr • Opcijsko: Geiger ravnanje

Stanje: generalkompletno obnovljen (rabljeno), Arburg, regulator ogrevanja Thermonic, Arburg Allrounder Klsdpfx Aljyvp Upe Ner 4 kosov skoraj novih regulatorjev. Bili so shranjeni kot rezervni deli v vzdrževanju.

Stanje: zelo dobro (rabljeno), Na voljo imamo pet cilinder ARBURG: Kljdpfx Alsxy Sx Ns Nsr 2 × 18 mm 2 × 20 mm 1 × 30 mm Eden izmed 18-mm cilindrov je kot nov. Ostali cilindri so v zelo dobrem do odličnem stanju (glejte slike). Cena je na kos.

Stanje: rabljeno, 200 ml paletni regal Schäfer Palflex Použitý tovar v dobrom stave, viď fotografie. Výška: 6,5 m Hĺbka: 110 cm, pozinkované Zaťažiteľnosť poľa: 24 000 kg Kledjvfnnzjpfx Al Ner Dĺžka nosníka: 4,1 m, oranžová Nosnosť nosníka / úroveň: 3000 kg Cenová ponuka: 17 900 € netto zo skladu Ponuka pozostáva z: + 49 ks predmontovaných rámov, hĺbka 110 cm, výška 6,5 m + 288 ks nosníkov, dĺžka 4,1 m, nosnosť na priestor 3 000 kg + 576 ks bezpečnostných zarážok + 196 ks betónových kotiev Použité rohové chrániče ihneď k dispozícii, príplatok za kus 15 € netto! Tabuľky nosnosti, dokumentácia apod. samozrejmosťou. Ďalšie príslušenstvo nájdete v katalógu príslušenstva. Tovar je na sklade. Doprava a montáž na požiadanie. Obhliadka možná kedykoľvek po dohode. Ďalšie informácie na požiadanie. Stále na sklade viac než 5 000 m paletových regálov od rôznych výrobcov. (Zmeny a chyby v technických údajoch, informáciách a cenách, ako aj predaj vopred vyhradené! Viď naše VOP, všetky ceny bez DPH zo skladu.)

Leto izdelave: 2003, stanje: dober (rabljeno), For sale is a 2-component injection molding machine from Arburg, model 420 C. The machine comes from a facility with a strong focus on maintenance and cleanliness. All maintenance and repair work is performed promptly by qualified personnel. - Arburg 420C 1000-150/60 - Clamping force: 1000 kN - Year of manufacture: 04/2003 - Screw diameter: 2x Ø25mm installed - 9x mold heating circuits - 2x hydraulic core pulls - 1x pneumatic needle shut-off - 9x temperature sensors - 1x mold cavity pressure sensor - Current operating hours: approx. 36,684 Additionally available: 1x spare cylinder Ø18mm for secondary injection unit Prices are subject to VAT. Kedpfx Aslwxpiol Nolr Inspection by appointment is possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell your equipment? For more information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Zapiralna sila: 25 ton Ksdpfxsvl Skgo Al Nelr Razdalja med stebri: 270x270 mm Največja odprtina: 275 mm Višina orodja: 200 mm Velikost orodne plošče: 400 x 400 mm Premer polža: 18 mm Volumen vbrizga: 20 cm3 Masa brizga: 17 g Tlak vbrizga: 2500 bar Delovne ure: 38.035 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 34.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 500 kN, premer vijaka: 30 mm, razmak između stupova: 320 mm, delovna prostornina: 85 cm³, tlak vbrizgavanja: 2.000 letvica, injekcijska masa: 77 g, izmetalna sila: 30.000 N, Arburg 320C 500-170 Leto izdelave: 2016 Krmiljenje Selogica Obratovalne ure: ca. 34.000h (črpalka) Premer polža: 30 mm Vbrizgana teža: ca. 77 g/PS Razdalja med stebri: 320 x 320 mm Dodatki: Izvlek jedra Vmesnik za dozirnik barve Vmesnik za rokovanje Euromap 67 Zračni ventil Teža stroja: 2200 kg Stroji so prosti! Kedpfoyyd Skjx Al Nslr Pridržujemo si pravico do sprememb, vmesne prodaje in napak!

Stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, razmak između stupova: 470 mm, For sale is an injection moulding machine from the brand Arburg, model 470 C 1600-800. The pump and a control card have been removed from the machine, so it is being sold as defective. Other than that, the machine is in very good condition. Technical data: Kjdpfx Aljv Edrie Nolr Pump hours: 61,400 Clamping force: 1,600 kN Clear tie bar spacing: 470 x 470 mm Ejector stroke: 225 mm Screw diameter: 50 mm Shot volume: 398 cm³ Dimensions: 4,335 x 1,635 x 1,950 mm Weight: 6,950 kg The machine is offered without peripherals. Transport and loading can be organised Europe-wide at additional cost upon request. Prices are subject to VAT. Viewing is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production, or do you want to sell your equipment? For more information or ways to contact us, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 184686, vpenjalna sila: 1.000 kN, premer vijaka: 25 mm, razmak između stupova: 420 mm, delovna prostornina: 54 cm³, injekcijska masa: 45 g, For sale is an injection moulding machine from Arburg, model 420 C 1000-150/60. The machine is in excellent and fully functional condition, very well maintained. The machine is offered without peripherals. Rotary table, material feed, temperature control units, and other accessories are not included. Technical specifications: - Year of manufacture: 2001 - Clamping force: - Clear tie bar spacing: 420 x 420 mm - Opening stroke: 500 mm - Minimum mould installation height: 250 mm - Platen size: 570 x 570 mm Kjdpjx E U Elofx Al Nslr - Ejector stroke: 175 mm - Screw diameter: 25 mm - Theoretical shot volume: 54 cm³ - Shot weight: 45 g/PS Upon request, we can organise transport and loading throughout Europe at an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 90.627 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 180 kN, premer vijaka: 18 mm, For sale is an injection moulding machine from Arburg, model 170U 180-70. The machine is fully functional and ready for immediate use. Technical data: Year of manufacture: 2004 Operating hours: 90,627 h Cylinder diameter: 18 mm Clamping force: 180 kN Needle shut-off: Pneumatic Internal pressure sensor Transport and loading can be organised Europe-wide upon request and for an additional charge. Prices are subject to VAT. Inspection by appointment possible. Feel free to contact us—our team looks forward to assisting you. Trade-in or exchange possible! Kjdpfx Aou Hqg Tsl Nelr Machinery purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2004, Po želji, za doplačilo, lahko organiziramo naklad in prevoz (po vsej Evropi). Vse cene vključujejo DDV Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam bo z veseljem pomagalo. Možna je menjava ali odkup! Telefon: Mobilni: z veseljem tudi preko WhatsAppa) Spletna stran: Nakup/prodaja strojev Ksdpexirqqjfx Al Nelr NAKUP / PRODAJA PROIZVODNIH & OBDELOVALNIH STROJEV IN OSTALO. Potrebujete kakovosten, vendar cenovno ugoden stroj za obdelavo kovin za svojo proizvodnjo? Ali ga želite prodati? Za več informacij ali kontakt obiščite našo spletno stran,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 55.806 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.500 kN, premer vijaka: 45 mm, skupna dolžina: 4.700 mm, skupna širina: 1.700 mm, skupna višina: 2.000 mm, skupna masa: 4.850 kg, For sale is an injection molding machine from Arburg, model 470 C 1500-400. The offer includes an Arburg handling unit, type Multi Select with X/Y/Z axes 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Technical data: - Year of manufacture: 2011 Kledpfxjw E Itie Al Nor - Clamping force: 1500 kN - Tie bar distance: 470 x 470 mm - Mounting platen: 650 x 650 mm - Operating hours (pump): 55,806 h - Injection unit: Ø 45 / SP 400 - Shot volume: approx. 254 cm³ - Shot weight: approx. 232 g - Injection pressure: up to 1580 bar - Dimensions: approx. 4700 x 1700 x 2000 mm - Weight: 4850 kg Transport and loading can be organized Europe-wide upon request, at an additional cost. All prices plus VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING & SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2002, obratovalne ure: 121.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 500 kN, premer vijaka: 20 mm, For sale is an Arburg injection molding machine, model 320 C 500-100. The machine is in good condition and fully operational after installation. Technical data: Year of manufacture: 2002 Pump hours: 121,000 h Clamping force: 500 kN Ejector force: 35 kN Distance between mounting plates: 550 mm Clear tie bar spacing: 320x320 mm Mounting plate dimensions: 446x446 mm Screw diameter: 20 mm Calculated shot volume: 31 cm³ Transport and loading can be organized Europe-wide for an additional fee upon request. All prices are plus VAT. Viewing by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Kjdpfjwqnhwex Al Nolr Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.