Amada Amada Hfbo 125-4 nakup rabljenega (62.117)

Leto izdelave: 1996, stanje: rabljeno, številka stroja/vozila: MBMAKZ, Demag chain hoist crane lifting unit 250kg DKUND 2-250 K V1 with double chain, each with 125kg load capacity 250 kg / 0.25 t load capacity / lifting capacity – single-strand Distance between the two lifting chains approx. 1.2 m (can also be shortened) Lifting height approx. 3.5 m Complete with pendant control (approx. 3 m) Total weight approx. 60 kg, connection 400V 50Hz TOP condition, fully functional. Not a worn or used-up device! Ijdpfxotn Rirj Aa Uoia Connect and start operating. Taken from running operation Item location: 75053 Gondelsheim See pictures

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, številka stroja/vozila: NOH138, Tehnični podatki: 1 Vetter PS1,25-4.0 stebrno vrtljiva žerjav NL 125 KG Nosilnost pri polnem iztegu 125 KG Višina: pribl. 3,2 m, spodnji rob iztegljivega dela: pribl. 2,52 m Izteg: pribl. 4 m, višina kljuke: pribl. 2 m Iedpfxsx A Sa Ej Aa Ujia Skupna teža pribl. 450 kg Z novejšim verižnim dvigalom Abus 125KG (letnik 2022) (2 hitrosti dviga) Priključitev na 400V 16A, rotacijski obseg 360° Žerjav je razstavljen in takoj na voljo Lokacija artikla: 75053 Gondelsheim Prodaja se le na slikah prikazan žerjav Zelo dobro stanje, glejte slike Pošiljanje prek špedicije ali osebni prevzem po dogovoru

Stanje: rabljeno, Leto izdelave: 2014, Použit stroj Leto izdelave: 2014 Oprema in tehnični podatki: - Delovno območje X: 3.740 mm - Delovno območje Y: 1.570 mm - Delovno območje Z: 350 mm - 4. os: prisotna - 5. os: 5-osno vreteno, motor 12 kW - z dodatno blokado C-osi Iisdex Hllxopfx Aa Uea - Mesta za menjavo orodja: 24 s ploščnim menjalcem; 10 na levi strani stroja - Vertikalna vrtalna vretena: 12 - Strojna miza: konzolna miza - Avtomatika pozicioniranja mize: prisotna - 6 delovnih podpor tipa e-motion - Poseben sistem vpenjanja za okvirje - Programska oprema: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 delovni polji za nihajno obdelavo - z avtomatskim centralnim mazalnim sistemom - z mobilnim upravljalnim pultom in PC monitorjem - s klimatsko napravo za elektro omaro - z vakuumsko črpalko 90 m³/h - z ročnim upravljalnikom - Vključeno: 12 vpenjal za okvirje, 8 velikih in 4 srednje vakuumske priseske Razpoložljivost: takoj Lokacija: Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: NR: 220.10.029.19, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj visokokakovostni robni lepilni stroj Format4 Tempora 60.06 EL – takoj pripravljen za delo! Dvignite svojo proizvodnjo na višjo raven s tem malo rabljenim robnim lepilnim strojem Format4 Tempora 60.06 EL v odličnem stanju. Stroj je zasnovan za industrijsko uporabo in zagotavlja izjemno natančnost ter popolno površino vsake plošče. - Visokonatančno avtomatsko lepljenje robov - Enota za predrezkanje za popolno pripravo roba - Zanesljiv in konstanten sistem lepljenja - Popolna obdelava: porezovanje, rezkanje, poliranje - Enostavno upravljanje in zanesljivo delovanje Vključene dodatne opreme: Iisdpfx Aaoy Dg N Tj Uja - Rdeč zračni rezervoar (kot je prikazano na fotografijah) - Dodatni ogrevani posoda za lepilo – idealna za hitro menjavo različnih barv lepila Stroj je skrbno vzdrževan, zelo malo rabljen in popolnoma operativen – pripravljen za neposredno uporabo v proizvodnji. Stroj je na voljo zaradi reorganizacije obrata. Za več podrobnosti ali ogled nas kontaktirajte.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Iedpfjd Tbbdox Aa Ujia Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) Iiedpfx Aefdkb Tsa Usa - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards Iijdpfod Tqalox Aa Uea - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Isdpfx Aasfdkb Ue Ujia Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level. Isdpfx Asguk A Hea Usia

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Iisdpfx Asfdkbhsa Usa - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. Iijdpfoguk Dksx Aa Usa When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Iisdpfoguk Dvex Aa Uja Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, hod: 100 mm, globina grla: 400 mm, kapaciteta rezervoarja za olje: 50 l, skupna dolžina: 2.700 mm, skupna širina: 1.700 mm, skupna višina: 2.200 mm, skupna masa: 3.500 kg, potovalna razdalja osi X: 600 mm, proizvajalec krmilnikov: TASK, model krmilnika: MASTER 3AX, delovna širina: 2.000 mm, upogibna sila (maks.): 35 t, zadnji prislon: 600 mm, razdalja med stojali: 1.800 mm, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, Oprema: spodnje orodje, zgornje orodje, Škarje SCHIAVI AMADA GH630A, dolžina rezila 3100 mm, rezalna moč 6 mm. Delujoče in popolne s pozicionerjem PRG910 z omejevalom do 1000 mm. Iedpfeygu Uhjx Aa Uoia

Stanje: rabljeno, Proizvajalec: AMADA, Hitrost traku: 0–31 m/min Iijdpfxjyyhvge Aa Usa

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 9.150 kg, nosilnost na odsek shranjevanja: 3.050 kg, skupna dolžina: 22.800 mm, skupna višina: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 22.800 mm, 4 dvopolna paletna regala (M35112711-3) Isdpoyz Iccjfx Aa Ueia vsak 5,7 m dolg, 3,5 m visok, 1,1 m globok, vsak s 2 polji, širokimi 2,7 m, vsak s 3 nivoji prečk, nosilnost na polje 3000 kg. - 12 okvirjev (RM3511 - RAL5019) - 24 talnih plošč, podlag, pritrdilni material - 48 talnih sider (ZZBA1210) - 48 posameznih prečk (T2711 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so vijačeni, ne predmontirani Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže - razklad tovornjaka izvaja kupec z lastno dvižno opremo - dobave po celotni Nemčiji, razen otokov! Dobave v EU države po individualnem dogovoru.

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), - RABLJEN - FIBER LASERSKI REZALNI STROJ S PALETNIM IZMENJEVALCEM IN SISTEMOM ZA NALAGANJE/RAZLAGANJE Ijdpfovhc S Hsx Aa Uoia X-OSNI HOD: 3270 mm Y-OSNI HOD: 1550 mm Z-OSNI HOD: 100 mm DELOVNA POVRŠINA: 3070 x 1550 mm DOVOLJENA OBREMENITEV MIZE: 920 kg VIR: AJ2000 Fiber ; 2000 W KRMILNA ENOTA: AMADA AMNC3i TEŽA: 11.200 kg SKUPNE DIMENZIJE: 10028 x 2900 x 2000 mm OPOMBA: S SISTEMOM ZA NALAGANJE/RAZLAGANJE LKI 3015FLC-AJ LETNIK 2013; AVTOMATSKA ZAMENJAVA ŠOB

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo 4 kose turbin Schlick - 320 mm, vključno z motorji 7,5 kW. Turbine iz Schlick ROTO-JET RB500 5.2/4/7,5. Tip turbin - 5.2. Količina abraziva - 140 kg/min. Hitrost abraziva na izhodu - 70 m/s. Turbine po generalni obnovi. Stroji za peskanje, peskalniki. Cena za 1 kos - 3000 EUR. Iiodpfx Aevphf Uea Uoa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.525 mm, skupna masa: 21.000 kg, obremenitev mize: 160 kg, število osi: 2, Ta AMADA EMZ 3610 NT je bila izdelana leta 2008. Opremljena je s prebijalno silo 300 kN, lahko obdeluje materiale debeline do 4,5 mm in omogoča največjo obremenitev mize 160 kg. Stroj ima 45 revolverskih postaj z avtomatskim indeksiranjem in dosega hitrost do 1000 udarcev/min. Če iščete kakovostni prebijalni stroj, razmislite o modelu AMADA EMZ 3610 NT, ki je na voljo za prodajo. Za dodatne informacije nas kontaktirajte. • Prebijalna sila: 300 kN • Pomik z reposicioniranjem (X/Y): 5000 mm / 1525 mm • Maks. debelina materiala: 4,5 mm • Hitrost pomika (X/Y): 100 m/min / 80 m/min • Hitrost osi: 128 m/min • Natančnost pozicioniranja: ±0,1 mm Isdpfox Enlxjx Aa Ujia • Število revolverskih postaj: 45 • Avto-index postaji: 2x B / 2x C • Pred dvema letoma generalno obnovljen, redno letno vzdrževanje Amada • Hitrost revolverja: 30 obr/min • Hitrost udarcev: 1000 udarcev/min

Stanje: dober (rabljeno), Leto izdelave: 2005, skupna dolžina: 4.200 mm, skupna širina: 2.500 mm, skupna višina: 1.800 mm, višina izdelka (maks.): 4 mm, skupna masa: 7.000 kg, Shearing capacity 4 mm, cutting length 3050 mm, throat depth 350 mm, motor 18.5 kW, motorised backgauge, support arms with scale, cutting line illumination, foot pedal, pneumatic sheet holders, new IMEX PLC control, dimensions 420x250x180 cm, approx. 6500 kg Iisdpfetp I S Ajx Aa Uoa

Leto izdelave: 2023, obratovalne ure: 76 h, stanje: rabljeno, številka stroja/vozila: 032862, Krmilnik ARTHUR KLINK, lastna teža: ca. 14.000 kg, transporter za odrezke NEUHÄUSER 2126-2, letnik 2022, serijska št.: 308904/01, hidravlični rezervoar HBE, letnik 2023, prostornina: ca. 1200 l, serijska št.: A22-08417 Robot za polnjenje YASKAWA YR-1-06VXH12-A00, letnik 2021, lastna teža: ca. 150 kg, največja nosilnost: ca. 12 kg, serijska št.: SV2112022790001, robotski krmilnik YASKAWA ERAS-1000-06VXH25-E10, letnik 2022, lastna teža: ca. 70 kg, 1 nakladalna in izpraznjevalna postaja 2-kratna METEC/EGS AUTOMATION Sumoekoplex MSM-avtomatizacija KLINK, letnik 2023, serijska št.: 220452-4, 1 verižni transporter EKS Automation broaching stroj 03.2862, letnik 2023, lastna teža: ca. 300 kg, mere (ŠxVxG): ca. 2450x2100x1600 mm, zaščitna ograja defekt zaradi vandalizma (komponente so bile ukradene iz krmilne omare) Iedpsyztdljfx Aa Uoia

Stanje: rabljeno, Guideway and Surface Grinding Machine WMW FRITZ HECKERT Aschersleben Model: SZ 1000 x 1250 x 3000 / 344 Serial No.: 13.2236.2 Year of manufacture: 1989 Nominal grinding range: 3000 x 1250 mm Table clamping surface: 3240 x 1000 mm Maximum grinding length: 3300 mm Machining width: 1250 mm Machining height: 1250 mm Grinding wheel diameter (surface grinding support): max. 600 mm Iodpfohv A A Dex Aa Ujia Grinding wheel width (surface grinding support): max. 100 mm Grinding wheel diameter (swivel support): max. 450 mm Electrical connection: 400 Volt, 50 Hz - Swivelling grinding support, drive power 16.5 kW, stepless speed control - Grinding support for surface grinding, drive power 15 kW, stepless speed control - new electrical control system based on SIEMENS S7, installed in 2001 - new electrical control cabinet, separate, year 2001 - Stepless grinding wheel speed adjustment on both grinding supports - Swivelling grinding spindle head for guideway and profile grinding - Swivelling and height-adjustable control panel - Coolant system, freestanding - Hydraulic system, freestanding - Oil circulation lubrication, freestanding - Various grinding wheels and mountings included Total required space (L x W x H): 11900 x 7700 x 4600 mm Weight: 45 tons In very good condition

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni strojni primež priznane nemške znamke ROEMHELD HILMA STARK, model NC 125. Visokokakovostna oprema za industrijsko uporabo – CNC rezkalni stroji, obdelovalni centri, orodjarne. 📊 Tehnični podatki: proizvajalec: ROEMHELD HILMA STARK model: NC 125 širina čeljusti: približno 125 mm sistem: precizni strojni primež vodilo: brušeno, visoka natančnost 🛠 Stanje: Rabljeno, z običajnimi sledmi uporabe. Tehnično v zelo dobrem stanju – primež deluje gladko, čeljusti so v dobrem stanju. Industrijska oprema, zelo robustna in natančna. 📦 Komplet vsebuje: primež ROEMHELD HILMA NC 125 nameščene čeljusti set kot na fotografijah ✅ Prednosti: zelo visoka kakovost izdelave (nemška proizvodnja) velika natančnost vpenjanja obdelovancev idealno za CNC in precizno obdelavo močna in stabilna konstrukcija ℹ️ Dodatne informacije: Prodaja se natačno ta primerek s fotografij. Možnost preizkusa na lokaciji. Isdpfey A Trrjx Aa Ueia Možna dostava ali osebni prevzem.

Stanje: novo, Stanje: novo Dobavni rok: cca 10 tednov od naročila Država izvora: Turčija Cena: 10.900 € Leasing obrok: 209,28 € Teža koluta: 1.250 kg Maks. zunanji premer koluta: 1.300 mm Min. notranji premer koluta: 450 - 550 mm Maks. širina koluta: 400 mm Min. širina koluta pri različici s pnevmatično potisno roko: 80 mm Motorizirani pogon Mehansko nastavljiv nastavk koluta s 4 čeljustmi Isdpfxowv H Awe Aa Ujia Regulacija hitrosti za odvijanje ter čas pospeševanja in zaviranja Fotoelektrični bližinski senzor SICK za kontrolo povešanja S PNEVMATIČNO POTISNO ROKO

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 34.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, prostor za palete: 108 evropske palete, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 4 rows of pallet racking (4 x M35112711-2) - Each 8.5 m long, 3.5 m high, 1.1 m deep - Each with 3 bays, 2.7 m wide - Each with 2 beam levels, compartment load capacity 3,000 kg Included: - 16 frames (RM3511 - RAL5019) Iedpfjv Ukz Aex Aa Usia - 32 base plates, shims, fastening material - 64 floor anchors (ZZBA1210) - 48 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - Max. 20 working days after receipt of payment - Delivery free to site / installation location - Unloading from the truck is the purchaser’s responsibility using their own forklift equipment - Deliveries are made throughout Germany (mainland only, excluding islands) - Deliveries to EU countries by individual arrangement

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 550 mm, skupna masa: 11.000 kg, skupna višina: 2.500 mm, obremenitev mize: 1.200 kg, število osi: 2, Ta brusilni stroj za ravnine AMADA MEISTER G3 je bil izdelan leta 2013 in predstavlja robustno rešitev za natančne aplikacije ravninskega brušenja. Zaradi elektronske/krmilne težave trenutno ni v obratovanju. Krmilnik FANUC je bil zamenjan, vendar stroj po zamenjavi ni bil ponovno usposobljen za delovanje. Servis proizvajalca je predlagal popravilo s predvidenimi stroški v višini 15.000 do 20.000 €, ki pa ni bilo izvedeno. Posledično je stroj že več let izključen in neobratovalen. Za dodatne informacije nas prosim kontaktirajte. Prednosti stroja Iodpfx Aaeyz Scgo Ueia Tehnične prednosti stroja • Primeren za težja dela. Dodatne informacije Stroj trenutno ni priključen na električno omrežje Dimenzije Globina stroja 6400 mm