Amada Amada Hfbo 100-30 nakup rabljenega (45.895)

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5066-0AC01-2 – Z permanent magnet motor, serial number E0T98376301008. Version Z: Equipped with holding brake and prepared for encoder system, including 06I0 H33K encoder. Used, with minor signs of wear, fully functional. Scope of delivery as shown in the photos. Crodpfx Aaombr I Djhsg

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5066-0AC01-2-Z permanent magnet motor with brake and encoder system – without cover. Serial number: E0T98376301002. Used, with normal signs of wear, 100% fully functional. Scope of delivery as shown in the photos. For technical details, please refer to the nameplate. Codpfxsmbr Nhj Aahsrg

Stanje: dober (rabljeno), Technical Data for Pallet Racking System: Racking System: Mecalux Technical Data for Installation: Number of Racking Rows: 01 unit Length per Row: approx. 25,300 mm Number of Bays per Row: 09 units à 2,700 mm Number of Levels incl. Ground Level: 02 units Volume Data: Pallet Spaces per Bay: 09 units Pallet Spaces per Row: 81 units Total Pallet Spaces: 81 units Based on: Load Carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total Height incl. Pallet: n.a. Maximum weight per pallet: 1,000 kg Scope of Delivery Includes: 10x pallet racking frames, used Colour: blue Frame type: A103 Frame profile: 100 x 79 x 3.00 mm Incl. horizontal and diagonal bracing, base plates The frames are pre-assembled (bolted truss design) 2,300 mm high 1,100 mm deep 36x pallet racking beams, new Colour: RAL 2001 orange Box profile: 110 x 50 mm Beam type: 2C-S 1115 Clear span: 2,700 mm Connector: G.E. - 3 Max. load per pair of beams: 3,000 kg with evenly distributed load 72x integrated safety pins, new Colour: orange For securing the longitudinal beams against unintentional lifting 40x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 20x leveling shims, used Design: completely galvanized For leveling racking frames installed on uneven floors 01x load sign With field and section load data, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Currently available from stock: 23 units Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Cjdpfx Aetq Sm Hjahjrg General Information on the Item: This item is offered for collection only. Any additional transport or shipping is subject to extra costs, which can be requested from us depending on the delivery location and scope.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer valja: 50 mm, širina valja: 930 mm, kotalkanje nagibanje: 90 mm, skupna širina: 985 mm, skupna višina: 80 mm, skupna dolžina: 1.980 mm, transportna dolžina: 1.980 mm, gradbena širina: 985 mm, gradbena višina: 80 mm, TAF Article Number: 1000003835 (230974) Manufacturer: Unknown Year of manufacture: Unknown Credpfx Asq T Nyvjahog Overall dimensions: approx. 1,980 x 985 x 80 mm (L x W x H) Side frame width: 985 mm Side frame height: 70 mm Conveying length: 1,980 mm Conveying width: 930 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 90 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully operational Function test: OK

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 60 kg, proizvajalec krmilnikov: Kuka, model krmilnika: KRC2 / 4, trajanje garancije: 12 meseci, PRICE ON REQUEST! Price on Request: - The price for the offered products is not listed directly and must be requested. Product Condition: - The products offered are used but have been completely overhauled. All wear parts (O-rings, precision bearings, shaft seals, screws, retaining rings, Castrol oil) have been replaced. Measurements and Testing: - Precise measurements have been conducted, particularly regarding axes and gearbox backlash. An 8-hour load test has also been performed. (Gearbox backlash: Axis 4 – 0.01 / Axis 5 – 0.01 / Axis 6 – 0.01) Delivery and Packaging: - The products are delivered in a special box, with insured shipping. Central Hand Exchange: - You have the option to obtain the central hand via exchange. Alternatively, it can also be purchased without exchange upon request. Warranty: - Each central hand comes with a 12-month warranty. Optionally, this can be extended to 18 months for an additional charge. Stock Availability: - The supplier has more than 100 central hands in stock. Various models are available. Express Overhaul: - Fast overhaul service for KUKA central hands is offered, completed within 48–72 hours after delivery. Repair Service: - In addition to the offered products, there is also a repair service for ABB wrists. Industrial Robot Repair and Maintenance: - Is your industrial robot experiencing issues such as oil leaks, excessive backlash, crash damage, or significant wear? Our experienced repair and maintenance service is here for you! Our Services at a Glance: Fixing Oil Leaks: - We identify and eliminate leaking points, replace seals, and ensure reliable sealing. Backlash Reduction: - By means of precise measurement and adjustment, we minimize backlash to ensure optimal performance. Crash Damage Repair: - Following collisions, we conduct a comprehensive analysis, replace damaged parts, and restore full functionality. Wear Reduction: - All worn components are carefully replaced to extend your robot’s service life. Wrist Repairs for Various Brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi, and many other brands. Why Choose Our Services: - Experienced team of robotics specialists - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Codpfx Aaorqgduoherg Our services include the overhaul of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi, and more. We generally sell only on an exchange basis. Sales price already includes statutory VAT. On-site pickup only by prior appointment. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you need more information or are interested in a product, we recommend contacting the supplier directly and submitting your inquiry to "vertrieb(at)robotic-refit.de".

Stanje: novo, Siemens 1AV3083B / 1LE1003-0DB32-2NA6-Z low-voltage motor with SKF 143 / GD gear ring pump – only one mounting bracket, unused, 100% functional, scope of delivery as per photos, Z see nameplate Csdpfx Asrip Rfoahorg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NVT, vrsta vhodnega toka: Enosmerni tok, trajanje garancije: 24 meseci, skupna masa: 30 kg, polnilna masa (maks.): 30.000 g, vhodna napetost: 220 V, pritisk: 2 letvica, kapaciteta rezervoarja: 30 l, New filling machine / filler suitable for dispensing liquids. Typical applications include: - Milk - Water - Alcohol - Disinfectants - Etc. Codpforivxcsx Aahorg This is a robust machine operating on compressed air and 220V—truly Plug and Play! It is particularly well-suited for filling small batches. Only a very small compressor is needed to run the machine; we can supply one if required. For optimal performance, we recommend a minimum 12L compressor. The filler features a 1000ml cylinder, allowing a maximum fill of 1000ml per stroke. Multiple strokes can be used for larger volumes, e.g., easily achieving 2500ml by dispensing 2 x 1250ml. The smallest possible stroke is 100ml; any amount between 100ml and 1000ml can be dispensed in a single cycle. We also offer models with cylinders up to 5000ml per stroke. Equipped with a suction hose, the machine can draw liquid directly from a drum or IBC. It comes with both a foot pedal and an automatic mode. In automatic mode, the machine continuously fills, making it easy and quick to process higher volumes. The foot pedal allows the operator to fill at their own pace. Depending on the operator and fill volume, the machine can process between 15 and 25 units per minute, making it a very fast solution. Weighing approximately 15-20kg, it can be conveniently placed on a table. Made entirely of stainless steel, this is a high-quality, durable machine. For questions, please email us—we are happy to assist with this or other machines. We also offer a label applicator, which pairs exceptionally well with the filler. We strive to respond within 24 hours, and are also available by phone. We look forward to assisting you on working days between 08:30 and 17:00.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2007, Funkcionalnost: nefunkcionalno, For sale is an injection moulding machine from the brand Netstal, model Synergy 1000-230. After a transport accident, the control cabinet is completely defective; for this reason, the machine is being offered as a spare parts donor or for repair. The machine would otherwise be fully operational and in good condition. Technical data: Operating pressure: 210 bar Injection force: 182 kN Crodsrfbnmepfx Aahog Clamping force: 1000 kN Opening stroke: 0-400 mm Mould installation height: 450-750 mm Total weight: 7,200 kg Operating hours: approx. 53,000 Available from March 2024. Initial hydraulic oil fillings can be ordered from us. Upon request and for an additional charge, loading and transport (Europe-wide) can be organised. Prices plus VAT. Inspection possible by appointment. Please contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, please visit our website.

Stanje: novo, največja dovoljena obremenitev: 38.953 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross Vehicle Weight: 49,500 kg King Pin Load: 18,000 kg Axle Load: 31,500 kg Unladen Weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck Length: 3,850 mm Fifth Wheel Height (laden): 1,200 mm Loading Platform Length: 9,300 mm Extendable by: 0 mm Axle Spacing: 1,360 mm Rear Overhang Radius: 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking, 30 mm thick. Loading Platform: Hydraulically liftable and lowerable loading platform behind gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN). Cutouts in the side frame of the loading platform for hooking in tension belts (LC 2,000 daN). Hardwood decking approx. 48 mm thick, chequered plate lining over the axles. Ramps: Two-piece steel ramps: One pair, galvanized, approx. 2,750 + 1,400 x 800 mm with hardwood decking approx. 48 mm thick. Ramps with hydraulically foldable ramp sections, hydraulic lifting unit, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lift capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's choice. Axles: SAF axles, air-suspended, with drum brakes, with lifting/lowering function. Crodeg Sk Tropfx Aahsg The rear axle is self-steering with electro-magnetic reverse lock, activated via reverse gear or manually. Axle tools included. Brake System: Brake system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit. Steel Structure: Steel frame constructed from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: Excellent and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust priming coat. High-quality 2-component (2K) top coat, single colour, in RAL shades of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connector bar with 24N, 24S & 15-pin sockets. Connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories 2" king pin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connector bar at the front. 4 wheel chocks with holder on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or electric winch (35mm², 3.5 m long, max. 250A) between trailer and tractor unit with connector (ANDERSON-ANDERSON) Galvanized folding support legs under the loading platform chamfer. One bracket for rotating beacon on the rear of the trailer. Control valves for the ramps mounted on the right side of the trailer. (± 4 kg) Yellow reflective tape as per EU regulations on the sides and rear of the trailer. Electro-hydraulic unit under the rear loading platform. (± 45 kg) On the gooseneck and on the ramps left...

Stanje: novo, Included in the scope of delivery: 100x Double Bar Buckles, brand new For 35 mm webbing Material color: Sendzimir galvanized Overall length: approx. 83 mm Overall width: approx. 54 mm Internal width: approx. 35 mm Material thickness: approx. 4.00 mm Breaking load: 1,600 kg Weight per piece: 0.090 kg Csdpjpuz I Sefx Aahsrg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Should transport or shipping of this item be required, additional costs will apply and can be provided separately depending on the delivery location or volume.

Stanje: novo, Fanuc A06B-0245-B100 servo motor, SN C02XB5696 + A860-2000-T301, unused in opened original packaging, 100% functional, scope of delivery as shown in photos. Crsdpfsq E Dqkox Aahjg

Stanje: dober (rabljeno), Clamping plate with T-slots, table section, welding table, plate boring mill, T-slot plate - Intermediate plate: for hydraulic press or eccentric press - Width: 1630 mm - Length: 1250 mm - Height: 100 mm - Plate: solid - Slot width: 22 mm - Weight: approx. 1000 kg Crsdpjb A Sgbsfx Aahog

Stanje: rabljeno, Clamping plate, welding table, welding bench, straightening plate, perforated plate - Dimensions: 2005/1500/80 mm - Table height: 800 mm - Plate: solid - Holes: 50 x 50 mm - Cast iron plate Crsdpocmk T Uofx Aahog - Vice - Dimensions: 2100/1700/H1030 mm - Weight: approx. 2000 kg

Stanje: rabljeno, Pneumatic cylinder, air cylinder, standard cylinder - Stroke length: 300 mm Crjdpfxscp H S Ee Aahsg - Piston diameter: 100 mm - Piston rod: 20 mm - Air input and output: adjustable - Quantity: 2 units available - Unit price: 125 EUR plus VAT - Dimensions: 605/182/H165 mm - Weight: 10 kg

Stanje: dober (rabljeno), Clamping plate with T-slots, plate table, welding table, plate boring mill - Width: 1100 mm - Length: 1300 mm - Height: 200/100 mm - Working height: 820 mm - with support ribs Crodpfx Aaeb A Nv Deheg - T-slot width: 24 mm - Weight: approx. 1000 kg

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT3072-0AF61-9-Z servomotor SN: ED088466801001 - Z = A22, G45 = with brake, G51 = with encoder system - fracture at one of the connectors, used, good condition, fully functional, scope of delivery as per photos, Z see nameplate Credpfsudgivsx Aahjg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Prodam profesionalni lepilni agregat Robatech RoBa 30, švicarske izdelave (Robatech AG CH-5630 Muri). Naprava je popolnoma delujoča, kompletna in pripravljena za uporabo. Idealna za pakirne linije, zgibne-lepilne stroje, kartonažerje ter stroje, ki zahtevajo natančno doziranje talilnega lepila. Tehnični podatki: * Model: RoBa 30 * Leto izdelave: 1984 * Zmogljivost: 900 g/min * Maks. hidravlični tlak: 40 bar * Maks. zračni tlak: 5 bar * Maks. delovna temperatura: 200°C * Napajanje: 240 V * Poraba toka: 10 A * Prenos črpalke: 1:8 * Identifikacijska ploščica je čitljiva, manometer deluje Stanje: Cjdsum Hufspfx Aaherg * naprava v dobrem tehničnem stanju * kompletna, brez manjkajočih delov * švicarska kakovost – zelo trdna konstrukcija

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5062-0AC01-0 - Z permanent magnet motor SN: E0Y61184301007, Z= H40: lubrication, re-lubrication device on DE and NDE sides, K31: nameplate, 2nd nameplate is loose inside the terminal box, used, normal signs of use, 100% functional, scope of delivery as per photos. Crsdpfx Aaeuca Rkehsg

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5064-0AC01-2-Z servo motor SN: E0T10002523001 – Z = G45 holding brake installed, used, in good condition, 100% functional, scope of delivery as per photos, Z as per nameplate. Credpeuca Rwefx Aaheg

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 10/2005, barva: drugo, Leto izdelave: 2005, Eigengewicht: 3.750 kg Achse 1: links 12 mm, rechts 7 mm Achse 2: links 4 mm, rechts 6 mm Achse 3: links 10 mm, rechts 10 mm Wir haben die Möglichkeit, die Anhänger zu stapeln! Cedpfx Ajucxu Ijahjrg

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT6082-1AF71-1AH0 AC servo motor, serial no.: EF510026313019, used, good condition, 100% functional, scope of delivery as per photos. Crjdpeu Hu R Asfx Aaheg

Stanje: rabljeno, Technical details: Width: 1300 mm Depth: 1000 mm Height: 1600 mm Machine weight approx.: 1950 / 1860 kg each 3 units available (price per unit) According to DIN 650: T-slot width a = 27.5 mm; h = 55 mm; b = 49 mm; c = 21 mm; T-slot spacing: 200 mm Crsdpfx Aasu Sq Ubsheg Clamping surface: W: 1300 x H: 1600 x Thickness: 63 mm When making your inquiry, please specify the number of required clamping angles.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, hod: 105 mm, skupna širina: 2.000 mm, skupna masa: 4.300 kg, delovna širina: 2.000 mm, razdalja med stojali: 1.600 mm, Promecam ITP2-050-20 Refitted in 2019 with Delem DA 65R control 15" touchscreen with graphics Bending length: 2000 mm Frame gap: 1600 mm Pressing force: 50 t CNC backgauge with X, R, Z1 + Z2 axes Connected load: 7.5 kW Stroke: 105 mm Int100 intermediate pieces Csdpfeu Dm Iusx Aahorg Front support tables Amada tool system incl. many tools

Leto izdelave: 2002, stanje: rabljeno, Linear actuator, linear gearbox, screw jack, spindle drive, linear unit, linear guide, linear axis Csdouzn Hmepfx Aahjrg - Manufacturer: RK Rose+Krieger, linear unit - Type: 70230100700 210792 /10 - Stroke: 500 mm - Shaft: Ø 8 x 25 mm - Dimensions: Ø 30 x 725 mm - Weight: 1.7 kg

Stanje: rabljeno, Technical Details: Length: 1000 mm Width: 630 mm Height: 40 mm Height above floor: 680 mm Machine weight approx.: 250 kg Required space approx.: L:1.0 x W:0.63 x H:0.68 m MEASURING AND INSPECTION PLATE Material made of special cast iron with steel additive Surface hand-scraped and spotted Csdpfx Asu Nki Tsaherg 3 supports (made of cast iron) for height adjustment Condition: good used condition