Wmw Fritz Heckert F315, F400, Fss400, Fw450, Fu350 nakup rabljenega (1.352)

Stanje: rabljeno, Leto izdelave: 1983, Technical Specifications: Press force: 160 t Throat depth: 360 mm Ram stroke (max.): 500 mm Bjdpfeu Nfvusx Agtodb Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4 x Ø 62 mm Ram speed forward: 200 mm/s Ram speed return: 125 mm/s Ram surface: 450 x 850 mm Borehole in ram: Ø 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7,200 kg Machine dimensions approx. (LxWxH): 2.1 x 1.4 x 3.4 m Manual counter i.O.

Stanje: rabljeno, Technical details: Grinding length: 1000 mm Grinding width: 315 mm Workpiece height: 390 mm Table speed: 2.5–25 m/min Clamping surface of the table: 250 x 1000 mm Distance table to spindle centre: 550 mm Grinding wheel dimensions: max. Ø 315 x 13–63 x bore Ø 75 mm Control voltage: 220 V / 50 Hz Total power requirement: 10.5 kW Machine weight approx.: 5.0 t Machine dimensions approx. LxWxH: 3.35 x 1.5 x 2.10 m The machine is currently located in the technical department. Bsdeu Ngn Sjpfx Agtjdb

Stanje: rabljeno, Technical details: Pressure: 2.3 t Stroke: 280 mm Throat depth: 155 mm Maximum ram stroke - forward: 0.08 m/sec Installation height with bolster plate (ram/top): 355 mm Distance table/ram: max. 355 mm Bolster plate on table: 280 x 280 mm Through hole in table: Ø 100 mm Ram speed, forward: 0.08 m/s Ram speed, return: 0.32 m/s Ram pin hole: Ø 20 x 45 mm Height above floor: 725 mm Total power requirement: 1.1 kW Approx. machine weight: 0.5 t Approx. machine dimensions (LxWxH): 0.6 x 0.7 x 1.6 m Press with mechanical two-hand operation. Pressure test performed up to 2.3 t. Good condition. Bjdpfx Aeu Nfwljgtjdb

Stanje: rabljeno, Leto izdelave: 1991, Technical Details: Pressing force: 160 t Stroke: 500 mm Throat depth: 360 mm Maximum ram stroke: 500 mm Distance between table and ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4x D=62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram area: 450 x 850 mm Pin hole in ram: 49 mm Height above floor level: 810 mm Total power requirement: 17 kW Machine weight approx.: 7200 kg Bdsdpsw D Awmjfx Agtjb Machine dimensions approx. (LxWxH): 2.1 x 1.4 x 3.4 m

Stanje: rabljeno, Leto izdelave: 1984, Technical details: Grinding diameter min/max: 8 / 40 mm Spindle speed: 3,000 rpm Total power requirement: approx. 1.2 kW Machine weight approx.: 0.24 t Machine dimensions approx. LxWxH: 0.7 x 0.9 x 1.3 m The grinding spindle is equipped with two hand levers: Left working area = Manual grinding device for small shank drills Right working area = Swivel device for tapered shank drills Maximum point angle 180° Small drill swivel arm: clearance angle 5° - 9°; drill diameter 8 - 15 mm manually adjustable; grinding wheel cup wheel Ø 200 x 40 mm with bore Ø 32 mm Large drill swivel arm: clearance angle 5° - 9°; max. drill diameter 400 mm; 6x indexing pitch manually; currently mounted grinding wheel Ø 180 x 31 mm with bore Ø 32 mm Bjdju Ng Irepfx Agtedb Grinding types: Standard grind, DK grind, centering grind, spiral countersinks, multi-step drills

Stanje: rabljeno, Tehnične podrobnosti: Bodpju N Ea Hefx Agtedb Širina: 1270 mm Globina: 1000 mm Višina: 1600 mm Na voljo 3 kosov vpenjalnih kotnikov T-utor po DIN 650: a=35 mm; b=60 mm; c=27 mm; h=65 mm Cena na kos kotnika

Stanje: rabljeno, Leto izdelave: 1965, Planscheibendurchmesser 5300 mm Umlaufdurchmesser 6300 mm Drehhöhe 2800 mm Supportverstellung 1700 mm Tischbelastung 50 t Bjdpfjyqt R Ajx Agtsdb Drehzahl 0,3-14 U/min Vorschub 0,056-10 mm/U Digitalanzeige Sony Support 2 Gesamtleistungsbedarf 120 kW Maschinengewicht ca. 187 t Serien-Nr.: 11670009-05rer Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: rabljeno, Leto izdelave: 1965, Planscheibendurchmesser 3500 mm Umlaufdurchmesser 4000 mm Drehhöhe 3150 mm Supportverstellung 1700 mm Tischbelastung 25 t Digitalanzeige Heidenhain Support 2 Gesamtleistungsbedarf 90 kW Maschinengewicht ca. 95 t Serien-Nr.: 6671024 Die technischen Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen, Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Bjdsyqtbuepfx Agtodb Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: rabljeno, Technical details: Turning length: 630 mm Swing diameter over slide: Rear slide: 250 mm Centre height over bed: 270 mm Centre distance: 900 mm Spindle bore: 26 mm Stepless speed range: 1.8 - 450 rpm Reverse speed: 23 / 32 / 46 / 370 / 510 / 740 rpm Cross feed: 0.07 - 1.11 / 36 steps mm/rev Longitudinal feeds: 0.063 - 0.63 / 12 steps mm/rev Tailstock quill taper: MT 5 Quill travel: 250 mm Bdodpfxovbh N Rj Agtob Total power requirement: 7.0 kW Machine weight approx.: 3.9 t Machine dimensions approx. LxWxH: 3.2 x 1.2 x 1.8 m Application: Mainly for relief turning and relief grinding of cutting tools (particularly hobbing cutters with/without thread pitch). Relief turning and relief grinding is possible from the front, rear and along the axis of the machine. Main drive via an 8-speed manual gearbox. Feed gearbox is designed as a 12-speed manual gearbox. Swivel range of the rear slide = 360 degrees Swivel range of the cross slide = 360 degrees Equipment: Lathe chuck / Driver plate Ø 210 mm with fixed centre Fixed centre in the tailstock Comes with 4 machine feet 3-jaw chuck Ø 250 mm internal diameter. *

Stanje: rabljeno, Leto izdelave: 1979, Technical details: Grinding diameter min/max: Mounting: Ø 200 x 32 mm Spindle speed: 3000 rpm Total power requirement: approx. 1.2 kW Machine weight approx.: 0.24 t Machine dimensions (LxWxH): approx. 0.7 x 0.9 x 1.6 m The grinding spindle is equipped with two hand levers: - Left working area: Manual grinding device for small shank drills, grinding wheel currently Ø 120 x 30 mm; mounting Ø 32 mm; speed 3000 rpm; with grinding rest - Right working area: Pivoting device for tapered shank drills; cup grinding wheel currently Ø 160 x 30 mm; mounting Ø 32 mm; speed 3000 rpm Bdjdpju Ng Ncsfx Agteb Cutting angle for two-fluted drills max. 180° and for three-fluted drills 120° Relief angle: 5°–9°; Drill Ø 8–40 mm, possible grinding types include: standard grind, cross-point grind, centering grind, spiral grind, step drill grind Machine lighting available

Stanje: rabljeno, Technical specifications: Drilling capacity in steel (diameter): 40 mm Throat depth: 360 mm Quill stroke: 280 mm Spindle taper: MT 5 Spindle speed range: 32 - 1400 rpm Feed rate: 0.11 - 1.73 mm/rev Connected load: 6 kW Max. spindle-to-table distance: 750 mm Table clamping surface: 780 x 650 mm Drill table adjustment (vertical): 800 mm Column diameter / size: 230 x 950 mm Machine dimensions (L x W x H): approx. 1.1 x 0.8 x 2.8 m Machine weight approx.: 1,500 kg Bjdpfxewid Uwe Agtsdb For tapping with right and left-hand rotation switching

Stanje: rabljeno, Technical details: Bsdpfxov Sz Dij Agtsdb X-axis travel: 1000 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Distance column – table edge: min. 150 / max. 550 mm Speed range: 28 – 1400 rpm / 18 steps Tool holder: ISO 40 (SK40) Milling head swivels left and right: 90° and forward/backward: 45° Feed, X/Y axis: 16 – 800 mm/min / 18 steps Table size: 1600 x 400 mm Table clamping surface: 1400 x 330 mm Total power requirement: 14.5 kW Weight approx.: 4000 kg Machine dimensions approx. LxWxH: 2.0 x 2.4 x 1.85 m Horizontal milling machine, converted with vertical milling head

Stanje: rabljeno, Technical details: X-travel: 450 mm Y-travel: 150 mm Z-travel: 400 mm Distance column - table edge (min./max.): 100 / 250 mm Spindle speed range: 25, 44, 78, 130, 228, 400 / 6-step rpm Feed rate X/Y: 10 - 100 / 8-step mm/min Table size: 990 x 300 mm Clamping surface: 800 x 195 mm Table swivel range: +/- 30° Total power requirement: unknown kW Weight approx.: 1200 kg Machine dimensions (LxWxH): approx. 1.5 x 1.3 x 1.5 m Bedpfxju Nc Nlo Agtodb Horizontal milling machine, currently fitted with a 32 mm milling arbor and a gear milling cutter. Machine vice included. *

Stanje: rabljeno, Leto izdelave: 1979, Technical details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over rear slide: 138 mm Swing diameter over rear slide: 250 mm Longitudinal travel: 700 mm Bdsdpovbhv Refx Agtsb Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm (8x stepless) Clamping diameter: 26 mm Feed range x-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MT5 Tailstock quill travel: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Dimensions (LxWxH) approx.: 3.2 x 1.2 x 1.8 m Application: Primarily for back turning and relief grinding of cutting tools (especially hobbing cutters, with or without thread pitch). Back turning and relief grinding possible from the front, the rear, and along the machine axis. Main drive via 8-step manual gearbox. Feed gearbox designed as a 12-step manual gearbox. Swivel range of the rear slide = 360°; Swivel range of the cross slide = 360°. Chuck is a taper disk Ø 200mm with MT5. Equipment: Mandrel Ø 49.5 x 400mm ARBAH-L 3+1 measuring system FRENIC 5000G11 frequency inverter 3-jaw chuck Ø 250 mm in good condition.

Stanje: rabljeno, Technical Details: Number of spindles: 4 Drilling capacity in steel (diameter): 30 mm Drilling stroke: 200 mm Drill spindle taper: MK3 Spindle overhang: 350 mm Spindle distance (center to center): 490 mm Spindle stock adjustment: 500 mm Feed rate: 0.07; 0.15; 0.25; 0.33 / 4-step mm/rev Feed: manual and automatic Spindle speed: 70 ... 1,600 / 8-step rpm Distance spindle/table: max. 430 mm Distance spindle/table: min. 180 mm Table size: 1820 x 400 mm Table adjustment: 250 mm with handwheel Total power requirement: 10.8 kW Machine dimensions approx. LxWxH: approx. 1.0 x 2.1 x 2.8 m All spindle heads with clockwise and counter-clockwise rotation Drill heads 1 to 3 with clockwise and counter-clockwise rotation, without tapping function Drill head 4 with automatic tapping function, Röhm chuck up to Ø 33 mm All drill heads and the table are height-adjustable. Equipment: Bodpfxeu Idt Ns Agtjdb Coolant supply Inclusive.

Stanje: rabljeno, Technical details: Grinding length: 300 mm Grinding spindle - rotatable: 350° Grinding spindle head adjustable: vertical: 250 mm Spindle head adjustment: crosswise: 230 mm Grinding spindle head adjustable: tiltable +/-15° Grinding diameter: Ø 250 mm Spindle speeds: 2200 - 3500 - 5200 rpm Work table: W: 120 x L: 950 mm Table movement: upper table swivable: right/left 45° Table movement: max. table travel: 500 manual mm Magnetic chuck surface: 305 x 130 x 100 mm Grinding wheel dimensions: cup wheel 125 x 20 Ø 32 mm Total power requirement: 1.8 kW Machine weight approx.: 1.0 t Bdodpfx Agsu Ng Npjteb Machine dimensions approx. LxWxH: 1.6 x 1.3 x 1.7 m Hydraulic unit dimensions: 600 x 550 x 870 mm Accessories: Universal clamping head Morse taper MK5 Drill bit grinding fixture Ø 10 mm

Stanje: rabljeno, Technical details: Number of spindles: 4 Drilling capacity in steel (diameter): 2–16 mm Drilling stroke: 140 mm Drill spindle taper: MT 3 Spindle outreach: 280 mm Spindle distance: 455 mm Spindle head adjustment: 250 mm via hand crank Feed rate: 0.08 – 0.12 – 0.20 – 0.31 mm/rev, 4 steps Feed: automatic + manual Spindle speed: 180 – 2000 rpm, 8 steps Distance spindle/table: min. 3x 140 mm and 1x 260 mm Distance spindle/table: max. 3x 700 mm and 1x 820 mm Table surface: 1800 x 350 mm Table adjustment: 300 mm via hand Total power requirement: 6.3 kW Machine weight approx.: 2.4 t Machine dimensions approx. (LxWxH): 2.1 x 0.9 x 2.2 m Bedpfx Aou Idugegtjdb Application: Drilling, countersinking, reaming, and tapping. Each drill spindle is equipped with its own drive motor. Features: Foot pedal/operation Hand crank

Stanje: rabljeno, Détails techniques : Bdjdpfxeu Nc R Ns Agtsb Course X : 500 mm Course Y : 380 mm Course Z : 330 mm Commande : Siemens 840 D / 810 D Cône de broche ISO, vertical/horizontal : 40 Surface de serrage de la table : 400 x 800 mm, fixe Vitesses de broche, sans paliers, vertical/horizontal : 35–1800 tr/min Tête de broche orientable à gauche et à droite : 90° Avance rapide X, Y : 3,15 m/min Avance rapide axe Z : 1,6 m/min Avance, sans paliers, X/Y/Z : 6,3 – 1250 mm/min Puissance totale requise : 7,4 kW Poids de la machine env. : 1,8 t Dimensions machine (LxlxH) env. : 1,8 x 2,2 x 1,8 m Dimensions armoire électrique (LxlxH) : 0,5 x 0,85 x 2,1 m La machine a été modernisée en 2002 avec une commande Siemens 840D/810D ShopMill moderne. - Course de réglage avec coulisse de contre-palier : 440 mm Équipement : - Système de refroidissement - Pupitre de commande avec bras pivotant Accessoires : - Divers pinces de serrage - Divers porte-outils SK 40 - Divers porte-fraiseurs selon disponibilité.

Stanje: rabljeno, Technical details: Shearing capacity: 1 mm Maximum disc diameter: 1000 mm Shearing capacity: 1 mm Maximum disc diameter: 1000 mm Bdedpfxou Icqye Agtjb Machine weight approx.: 0.2 t Machine dimensions (LxWxH) approx.: 2.0 x 0.5 x 1.4 m Application: Manual cutting of round steel sheet parts Upper blade: Ø 69 mm x 11 mm; vertical adjustment 25 mm by hand lever Lower blade: Ø 74 x 15 mm; adjustment NO = fixed Centering mount with die The material is positioned manually using a hand grip; vertical movement 15 mm, horizontal movement 500 mm, both manual.

Stanje: rabljeno, Leto izdelave: 1981, Technical details: X-travel: 400 mm y-travel: 420 mm z-travel: 380 mm Table size: 710 x 400 mm Max. table load: 120 kg Spindle speed range: 45 - 2240 / 18 steps rpm Infinitely variable feed: 6.3 - 600 / 2 stepless mm/min Quill stroke vertical: 100 mm Quill stroke horizontal: 100 mm Spindle taper vertical/horizontal: SK 40/SK 40 Spindle head swivels left and right: 90° Distance table/horizontal spindle: min./max.: 200 / 325 mm Distance table/vertical head: min./max.: 150 / 730 mm Total power requirement: 5.5 kW Machine weight approx.: 1,950 kg Machine dimensions LxWxH: 1.7 x 1.4 x 1.9 m Control cabinet dimensions: 850 x 500 x 1500 mm Bdsdpfeu Nc Hkex Agtjb Incl. machine feet and operating manual

Stanje: rabljeno, Technical details: Z-axis travel: 400 mm Speed range: up to 3,000 rpm, stepless Feed rate, stepless: not specified Quill stroke, vertical: 100 mm Spindle taper: MT2 (Morse Taper 2) Table surface: 445 x 315 mm Distance table to lower edge of spindle: max. 520 mm Table travel, longitudinal: 250 mm Table travel, cross: 330 mm Table height above floor: 920 mm Total power requirement: 1.6 kW Approx. machine weight: 1,500 kg Machine dimensions (LxWxH): 1.3 x 1.1 x 2.0 m Application: Milling and drilling of elongated holes. The drill spindle head is equipped with a precision dial gauge for depth indication. 5x T-slots according to DIN 650: a=10; h=18; b=18; c=8 mm Features: Two-axis digital readout, ACU-RITE Bodpfxsv A S Efo Agtjdb

Stanje: rabljeno, Technical details: Pressing force: 40 t Throat depth: 365 mm Distance table/ram: 800 mm Ram stroke – max.: 500 mm Ram return speed: 0.45 m/sec Ram advance speed: 0.10 m/sec Ram surface: 450 x 360 x 74 mm Bdedpfou Nfuqjx Agtsb Table surface: 630 x 500 x 73 mm Passage hole in table: Ø 205 mm Table height above floor: 720 mm Total power requirement: 13.0 kW Machine weight approx.: 3.2 t Machine dimensions approx. LxWxH: 1.7 x 1.1 x 3.0 m Further technical features: -Braking time: 443 ms -Braking distance: 9 mm -Last machine inspection: May 2020, valid for 1 year

Stanje: rabljeno, Leto izdelave: 2004, Tehnične podrobnosti: Dolžina mize: 4000 mm Širina mize: 2000 mm Maks. debelina plošče: 100 mm Višina mize nad tlemi: cca 860 mm Bjdju Nkxuepfx Agtsdb Skupna teža: 5,6 + 0,5 t Dimenzije D׊×V: 4,0 x 2,2 x 0,1 m Varilna miza / Cena: 0,50 EUR/kg z osnovo in 6 podnožniki

Stanje: rabljeno, Accessories for, e.g., a table-type boring mill BFT 130 Spindle head and swivel angle are each adjustable 360° around their own axes Bdodeu Nlgyspfx Agtsb Two swivel planes The set angles can be read off from circumferential scales Maximum speed: 600 rpm Spindle taper: ISO 50 Weight approx. 270 kg Including coupling piece to drive SK 50 quill/head *

Stanje: rabljeno, Technical Details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Spindle bore: Ø 32 mm Spindle speed range: 36...1,800 / 8 steps rpm Feed range x-axis (longitudinal): 0.02..0.8 m/min Feed range y-axis (facing): 0.01..0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions (LxWxH) approx.: 2.1 x 1.1 x 1.4 m Precision Lathe by Mikromat - Travel of carriage: longitudinal = 580 mm; cross slide = 170 mm; top slide = 130 mm - Workpiece holding via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Quick-change tool post: Multifix Bsdpfx Aevadd Iogtedb Equipment: Coolant pump 4 machine feet Copying attachment