Viessmann Vitoplex 270Kw Niedertemperaturkessel Viessmann Vitoplex 270 Kw Nizkotemperaturni Kotel nakup rabljenega (37.195)

Stanje: pripravljen za uporabo (rabljen), Mahle vijačni kompresor, vijačni kompresor, kompresor; Mahle MSK D37, 37 kW vijačni kompresor, rabljeni stroj Proizvajalec: Mahle Hedswqbzdopfx Af Ten Tip: MSK D37 Leto: 1995 Dimenzije: 1480 x 845 x 1010 mm Delovne ure: 48.600 Največji delovni tlak: 10 bar Moč: 37 kW Dobavni količina: 4900 l/min; 4,9 m³/min

Stanje: pripravljen za uporabo (rabljen), DC pretvornik, Simoreg Siemens DC-pretvornik D485/30 Mre-GeE6S22, rabljeni stroj Proizvajalec: Siemens Simoreg Model: D485/30 Mre-GeE6S22 Skupne dimenzije: Dolžina: 270 mm Širina: 230 mm Višina: 385 mm Teža: 6 kg Električne specifikacije: 3-fazni vhod: 3AC; 400V; 25A Izhod: DC 485V; 30A Hjdpfx Afju U Ilgo Ten 2-fazni vhod: 2AC; 400V; 5A Izhod: DC 325V; 5A

Stanje: novo, Manufacturer: SIEMENS Hsdpfxjd Tkpxe Af Tjn Model: IE3 380 V; 37 A; 18.5 kW RPM: 978/min

Stanje: rabljeno, Centrifugalni ventilator, 18,5 kW, rabljeni stroj Skupne dimenzije: 1680 × 1650 × 1260 mm Teža: 457 kg Električni podatki: 400 V; 18,5 kW; 34 A Hodpjyzypnjfx Af Ten Izračunan pretok zraka: 11.800 m³/h Izračunan tlak: ~4500 Pa, 3,96 kg/s

Stanje: pripravljen za uporabo (rabljen), Centrifugalni ventilator, ventilator, ventilator 5,5 kW, rabljeni stroj Splošne dimenzije: Dolžina: 1710 mm Širina: 1440 mm Višina: 1660 mm Teža: 400 kg Električni podatki: Napetost: 400V Tok: 13,3A Moč: 5,5 kW Specifikacije motorja: Proizvajalec: AEG Tip: AMV 132 MV4/8 Hjdovcax Hepfx Af Ton Dimenzije lopatic: Premer: 500 mm Širina: 230 mm

Stanje: rabljeno, Ventilator 2,2 kW, 5000 m³/h, izpušni ventilator, centrifugalni ventilator, rabljeni stroj Proizvajalec: B és S Ventilátor Tip: FVFH 450/500 Skupne dimenzije: Širina: 790 mm Globina: 730 mm Višina: 980 mm Leto izdelave: 2017 Pretok zraka: 5000 m³/h Električni podatki: 400 V, 2,2 kW, 4,7 A Hjdpfxeypvcle Af Tsn Tlak: 800 Pa

Stanje: rabljeno, Črpalka, Wilo IPL50/175-7.5/2; 7,5 kW; Rabljena oprema Proizvajalec: Wilo Tip: IPL50/175-7.5/2 Skupne dimenzije: Širina: 270 mm Globina: 380 mm Višina: 670 mm Električni podatki: 400V; 13,6A; 7,5 kW Maks. tlak: 10 bar Temperatura tekočine: -20 °C … +120 °C Maks. pretok: ~69 m³/h Maks. dvižna višina: ~38 m Leto izdelave: 2012 Hjdpfjx Ttt Dox Af Ton

Stanje: pripravljen za uporabo (rabljen), Centrifugalna črpalka, vertikalna centrifugalna črpalka, črpalka, Andritz 13,7 kW, rabljeni stroj Proizvajalec: Andritz Tip: HP 50-180.1/2/S Električni podatki: 400V; 27A; 13,7kW Pretok: 42 m³/h Dvižna višina: 80 m Leto izdelave: 2013 Skupne dimenzije: Dolžina: 380 mm Širina: 350 mm Višina: 1080 mm Hjdowmb Ebepfx Af Ton

Stanje: pripravljen za uporabo (rabljen), Centrifugalna črpalka, vertikalna centrifugalna črpalka, črpalka, Andritz 13,9 kW, rabljeni stroj Proizvajalec: Andritz Tip: HP 50-180.1/2/S.15/2 Električni podatki: 400V; 27A; 15kW Pretok: 42 m³/h Dvižna višina: 80 m Leto izdelave: 2015 Skupne dimenzije: Dolžina: 380 mm Hodpfx Aev Dr Hfjf Ton Širina: 350 mm Višina: 1080 mm

Stanje: pripravljen za uporabo (rabljen), Cevna črpalka, vijačna črpalka, Loher 4 kW, rabljeni stroj Skupne mere: Dolžina: 2330 mm Hedovrzi Sepfx Af Ton Širina: 410 mm Višina: 520 mm Teža: 240 kg Električni podatki: Napetost: 400V Moč: 4 kW Tok: 8,6 A

Stanje: novo, Stranska kanalna vakuumska črpalka, stranski kanalni puhalnik, vakuumska črpalka, Busch Samos Si 1150 E1 Proizvajalec: Busch Tip: Samos SI 1150 E1 Stanje: Novo, testirano Teža: 360 kg Leto: 2020 Skupne dimenzije: 2100 x 1360 x 1000 mm Hedov Tppijpfx Af Ton Črpalka je vgrajena v zvočno izoliranem ohišju iz nerjavečega jekla. Zmogljivost črpalke: Maks. diferenčni vakuum: -185 mbar, 828 mbar Maks. diferenčni tlak: +155 mbar, 1168 mbar Pretok zraka: 1200 m³/h Električni podatki: 11/12,6 kW, 400 V, 50/60 Hz, 26–46 A

Stanje: rabljeno, Electric motor Power - 210 kW Speed - 1485 rpm Protection class - IP55 Weight - 1190 kg Hjdjhm Avaspfx Af Tjn

Stanje: pripravljen za uporabo (rabljen), nosilnost: 2.700 kg, dvižna višina: 6.300 mm, Štirismerni viličar, stranski viličar, dvižni viličar BT Reflex FRE 270 Nosilnost: 2700 kg pri centru obremenitve 400 mm Gradbena višina: 2950 mm Hsdoy Ux Agjpfx Af Ton Dvižna višina: 6300 mm Prosti dvig: 2087 mm Širina vilic: max. 2200 mm, min. 540 mm Dolžina vilic: 1140 mm Lastna teža: 4520 kg z vključno baterijo Leto izdelave: 2016 Približno 850 delovnih ur Ponudba je namenjena izključno podjetjem v skladu z §14 BGB.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Prodaja se delujoči in zelo dobro ohranjen dvogorivni gorilnik (olje/plin) znamke ELCO KLÖCKNER, vključno s plinsko linijo Dungs DN 65. 1. Tip gorilnika: EK 6.200 GL Moč: 279 - 1710 kW Hjdpfx Aoy Uuw Hof Ten Kurilno olje: 50-163 kg/h Leto izdelave: 2010 Priključni tlak: 300 mbar

Stanje: rabljeno, prevoženi kilometri: 66.050 km, moč: 84 kW (114,21 KM), vrsta goriva: bencin, vrsta prenosa: samodejen, konfiguracija osi: 2 osi, skupna masa: 2.150 kg, prva registracija: 03/2023, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 5, skupna širina: 1.855 mm, skupna višina: 1.833 mm, gorivo: bencin 91, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, klimatska naprava, nadzor oprijema, navigacijski sistem, parkirni senzorji, računalnik na krovu, servovolan, sistem za imobilizacijo, spojka prikolice, tempomat, 8T8 Automatic Distance Control ACC (with DSG including “follow to stop”) incl. speed limiter, 7L6 Start/Stop system, 7Y1 Lane Change Assist “Side Assist” including Blind Spot Detection and Rear Traffic Alert, 7X5 Park Assist (automatic parking system) and front & rear parking sensors, EM1 Driver Assistance System: Drowsiness Detection, FA49 Driver Assistance System: Lane Keeping Assist (Lane Assist), U9C Multimedia interface: 2 x USB (type C) front and 2 x USB charging ports (type C) in rear center console, 8IY LED headlights, 1D1 Trailer hitch, FA50 Driver Assistance System: Lane Change Assist (Side Assist) with Rear Traffic Alert, FA05 Driver Assistance System: Emergency Assist, ABRG Driver Assistance System: Automatic Distance Control (ACC incl. follow to stop), 6I6 Driver Assistance System: Travel Assist, KA2 Rear view camera, ZW6 Winter package, 1A5 Fuel system: petrol direct injection, 1EX Type plate for M1 passenger vehicles with EU type approval, weight specification and COC documents, 57 Soul seam in madras brown/Soul-Soul/Black, 9Z0 Operating voltage 12 V, NY0 Standard battery/alternator, QJ1 Chrome trim on the sides and tailgate (not with rear wing doors), U5A Instrument cluster (km/h), displays for speed, total/daily mileage, rpm, fuel level and clock, QG1 Extended maintenance interval, QI6 Service indicator (30,000 km or 2 years variable), PL5 Light and vision package, E4P PanAmericana, Z2A “PanAmericana”, K4B Estate, 6XP Exterior mirrors electrically adjustable, heated and foldable, 9T1 Heated front washer jets, 8RL 6 speakers (4 front, 2 rear), R26 Preparation. You can reach us by phone Monday to Friday until 8:00 p.m. and Saturday until 4:00 p.m.! More info: Leasing/financing and trade-in possible! Subject to error and prior sale! All info without guarantee ... more on our homepage Hjdpfjzakp Uox Af Ten

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, potovalna razdalja osi X: 9.000 mm, pomik osi Y: 2.700 mm, pomik po osi Z: 420 mm, število osi: 5, proizvajalec krmilnikov: SIEMENS, model krmilnika: Siemens 840D sl / PCU 50 with NCU 730, moč vretenovega motorja: 26.000 W, največja hitrost vretena: 24.000 obr/min, This 5-axis CNC machining center MAKA PM 270 X was manufactured in 2012. It features an impressive X-axis travel distance of 9,000 mm and a Y-axis travel distance of 2,700 mm, designed for workpiece thicknesses up to 60 mm. The machine is equipped with a powerful milling spindle with adjustable speeds of up to 24,000 rpm and a 32-position tool magazine for efficient tool changes. If you are looking for a high-quality milling and drilling machine, you should consider the MAKA PM 270 X machine we offer for sale. Contact us for further details. • CNC Control: Siemens 840D sl / PCU 50 with NCU 730; OP 15 control panel with 15" display mounted on a carriage along the longitudinal axis • Working area / machinable cuboid (with tool L/D 160 mm): • X: 9,000 mm (with both gantries) • Y: 2,700 mm • Z: Standard cube size 420 mm • Special configuration for workpiece thicknesses up to 60 mm • 5-axis unit • Gantry 1: • Universal 5-axis milling head • Spindle power: 20/26 kW (S1/S6) • Speed: up to 24,000 rpm, water-cooled • Tool interface: HSK F63, automatic tool change • Thread cutting possible • Chain tool magazine: 32 positions with rotary gripper; fixed on operator side • Gantry 2: • 2 aggregate mounting consoles, each with 2 heavy-duty multi-spindle drilling units • Shared extraction hood • 13 drilling spindles per unit (26 total), individually selectable vertically, L-shaped arrangement • 2 angled drilling spindles, 0-25° adjustable forward (1 right, 1 left), each approx. 2.2 kW, 2,800 rpm • Drill chucks: Rego Fix ER 25 M • Machine table: • Base frame with linear guides • 12 table traverses on linear guides for X-positioning, each NC-controlled and positionable • Vacuum supply integrated into the traverses Hjdpfx Aoy Uwrgof Tjn • Each traverse individually vacuum-monitored and linked to the machine control • Installation requirements: foundation recess approx. 300 mm • Workplace safety: • Moving safety cabin on both gantries • Safety bumper and safety light curtain system on operator side and rear Additional equipment: • Workpiece feed: 1 belt conveyor with 4 belt strands (each 40 mm wide); each traverse with NC controlled lifting unit; lifting height 110 mm • Vacuum system: Busch vacuum pump type Mink MM 1322, suction capacity 250 m³/h, with 500-liter buffer tank for quick vacuum build-up • Chip transport: 2 chip conveyors under the machining area (for chips/small waste up to 100 x 100 x 100 mm) • Automatic centralized lubrication system

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Demonstration machine with approx. 9 operating hours Another machine available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for higher throughput performance We are happy to offer a free test using your material. For this, I invite you to visit us in Neckartailfingen. Alternatively, you can send your material to us via freight carrier and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Blades: 15 pieces, reversible multiple times, Optional double blade row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening 630 x 820 mm Hopper volume approx. 0.6 cbm Hydraulically operated pusher Screen perforation of your choice (10–40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when rotor idling - Rotor speed 70–90 rpm for high throughput - Timed control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder accessories for extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco Rings: + €1,980 net (recommended for more than 20% hardwood) - Double blade row + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or materials less than 3 mm in thickness) - Angled conveyor belt + €8,770 net Angle: adjustable 0–60 degrees Discharge height: approx. 2,000 mm - Automatic overbelt magnet + €5,980 net - Alternatively, fixed magnet block over conveyor belt for manual cleaning + €990 net (for low metal content) - Conveyor and overbelt magnet control + €2,750 net (Start and stop synchronised with shredder) Alternatively, manual start and stop of belts + €595 net Raw material requirements: - The moisture content (dry basis) must be below 30% - Installation temperature: heated room with at least +5°C - Metals and mineral contaminants such as sand, stones, etc., cause increased wear Hodpeb Ny Eyofx Af Tsn

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced blade projection, suitable for hard and soft materials + 22 kW motor + Effective square cutters/blades *For pallets: up to a maximum of 10 pallets per hour *Depending on screen and material. Considerably higher throughput with smaller residual wood. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: colour of the machine may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown when rotor is idling - 70-90 rpm for high throughput performance - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher Hedsx Af Rdopfx Af Ten - Vibration-dampening machine feet - CE compliant The following options are available at an extra charge: - Raise the shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angle conveyor (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Enlarged hopper extension 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral impurities. Damage to the tools and/or increased wear may result.

Stanje: novo, Leto izdelave: 2026, Single-Shaft Shredder MRZ 530 Included: + Profile rotor for increased throughput performance Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide range of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by its robust construction, which guarantees consistent quality during continuous operation. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier, and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Knives: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume approx. 0.4 cbm, Throughput capacity: 1 – 5 hopper fillings/h, Hydraulically operated pusher, Screen perforation as required (10 – 40 mm), Suction connection Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of raw material: must be below 30% absolutely dry. Standard features: • Fast hydraulic system • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start-up Hedpod Db N Iofx Af Ten • Automatic shutdown in case of idling rotor • Removable extraction chute • Rotation speed 70 – 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control of the hydraulic pusher • Stable guides for the hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €5,980 net - Synchronised control for conveyor and overband magnet + €2,750 net (Start and stop synchronised with the shredder) Requirements for input or raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Leto izdelave: 2025, stanje: novo, Granulator MVZ 7.5 kW Hodpfx Ajd N Dn Djf Ten Demonstration unit available at special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for the secondary size reduction of wood chips. More details can be provided after testing with your material. Our granulators are used for size reduction of a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for a variety of shredding tasks. For example, in injection molding machines, scrap parts and sprues are produced that need to be recycled. In blow molding machines, along with scrap parts, trim waste or start-up parisons must be processed. Materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes from blow molding can be processed. Material is fed from above via a hopper into the grinding chamber of the granulator. The internal rotor is equipped with knives. The material is shredded between the rotating knives and the stationary knives mounted in the grinding chamber housing until it passes, as defined regrind, through the screen located below the rotor. *Option: The ground material is usually pneumatically conveyed to big bags, silos, or other containers. The price applies only to the size reduction unit as shown in image 1 - Fan, cyclone, and filter are optional components. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger machines available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material Application example: Shredding of PE 1000 plastic Input material: approx. 40 mm chip length Secondary shredding to approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) ___ Significantly higher throughputs can be achieved when re-shredding G 30 wood chips. Up to a maximum of 400 kg/h with a 10 mm screen *metered feed, e.g., via conveyor belt or auger. Details available after a test run with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930 x 730 x 1420 mm Weight: 450 kg Suction nozzle: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm – other sizes available on request Price per screen: €390 Price for replacement knife set: €679 Suitable for example for: - All types of plastic waste Various materials – HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger units available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *dependent on screen and material Opening: 620 x 400 mm *optional with matching extraction/conveying system Granulator MVZ / 30 kW Throughput up to 400 kg/h *dependent on screen and material Opening: 620 x 500 mm *optional with matching extraction/conveying system --- To select the right machine, the following information is required: - Length x width x height of the feed material? - Required screen size (final output size in mm)? - Required throughput per hour in kg? - Wall thickness in mm? - Material description Photos can also be helpful

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Used machine Hedpfx Afoy S U Hcj Tsn Manufacturer: Kallfass Verpackungsmaschinen GmbH Model: L-sealer KW 5050 Year of manufacture: 1999 Dimensions: approx. 1850 x 1000 x 1550 mm (L x W x H) Weight: approx. 210 kg net / 250 kg gross Technical Data: Seal frame dimensions: 500 x 500 mm Film roll width: max. 650 mm Working height: 840 – 950 mm Power supply: 230 V three-phase Rated power: 1.5 kVA Rated current at 230 V: 6.5 A Extremely robust and user-friendly manual L-sealing machine. Seal frame dimensions 500 x 500 mm. Equipped with a reliable impulse sealing system, Teflon-coated cutting wire for completely odorless operation, and a proven high-pressure sealing mechanism.

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Fröhling sistem za sekance 500kW vklj. zalogovnik toplote. Odvzem s potisnim dnom za polnjenje. Samodejni polnilni in uplinjevalni sistem (star 2 leti). Omrežna črpalka vklj. upravljalnik za daljinsko ogrevanje. Cena po dogovoru. Hsdoy Ti Evopfx Af Tsn

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 37 kW (50,31 KM), Razstavni eksponat, takoj na voljo: nov vijačni kompresor ALMIG BELT XP 37 - 10 bar z upravljanjem Aircontrol Basic Hedpfxey U H N Ue Af Ten letnik 2026 Delovnih ur: 0 h Tehnični podatki Tip: BELT XP 37 Obratovalni nadtlak: 10 bar Pretok, po ISO 1217 Priloga C: 5,96 m³/min Zaščitni razred / razred izolacije pogonskega motorja: IP 55/ISO F Nazivna moč pogonskega motorja: 37 kW Obratovalna napetost / frekvenca: 400/50 V/Hz Raven zvočnega tlaka (DIN 45635 T.13): 74 dB(A) Dolžina: 1350 mm Širina: 940 mm Višina: 1680 mm Teža: 895 kg Priključek stisnjenega zraka: G 1 1/2" Obiščite našo prodajalno v Erlangnu. Vedno imamo na zalogi veliko izbiro novih in rabljenih kompresorjev. Za nove stroje nudimo leasing preko naše hišne banke z resnično enostavno ureditvijo.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Danfoss VLT AutomationDrive FC301/302 frekvenčni pretvornik za motor moči 22 kW. Enota je nerabljena (stara zaloga), shranjena v suhih skladiščnih pogojih. Proizvajalec: Danfoss Model: VLT AutomationDrive FC301/302 Moč motorja: 22 kW Hjdpfx Aeyl Nwnef Ton Stanje: Novo – nikoli v uporabi S krmilno ploščo (LCP) Industrijska težka serija Primeren za črpalke, ventilatorje, ekstruderje, stiskalnice, procesne linije Na voljo takoj iz zaloge.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 475 kg, skupna dolžina: 1.890 mm, skupna širina: 720 mm, skupna višina: 1.600 mm, moč: 15 kW (20,39 KM), vrsta goriva: električni, volumenski pretok: 110 m³/h, obratovalni tlak: 10 letvica, tlak (min.): 8 letvica, tlak (maks.): 13 letvica, vrsta hlajenja: zrak, Oprema: Na voljo je tipska ploščica, hladilni sušilnik, Hertz HGS F 15 Kompakt (10 bar) Screw Compressor Delivery rate: 2.2 m³/min - Energy-efficient IE3 motor with star-delta connection - 500 liter compressed air receiver - AD2000 certificate - Integrated refrigeration dryer - Pre-filter and after-filter Hedpowum N Ijfx Af Ton - Condensate drain - Digital control unit Logic 9 On request, the compressor can be delivered within a 200 km radius of our company location. Delivery costs by arrangement.