Tunkers Univerzalni Lepilni Stroj nakup rabljenega (27.733)

Stanje: rabljeno, NC Universal Tool Milling Machine MAHO Type MH 700 P with HEIDENHAIN TNC 121 Contour Control - Circuit diagram no. ET 226 Year of manufacture 1979 Travel paths: X: 600 mm, Y: 400 mm, Z: 400 mm Table size: 900 x 500 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed rate X, Z axis: 1–600 mm/min, stepless Feed rate Y: 1–300 mm/min, stepless Rapid traverse X, Z axis: 1.5 m/min Rapid traverse Y axis: 0.75 m/min Quill travel vertical: 80 mm Quill travel horizontal: 80 mm Spindle drive: 4 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contour control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed - Hydro-mechanical tool clamping - Coolant system integrated in machine base - Universal built-in rotary table, tiltable and swivelable via leadscrews +/- 30° - Universal built-in rotary table with manual cross adjustment, 200 mm - Universal built-in rotary table, 360° rotary function with hydraulic clamping - Rotary table with direct indexing 72 x 5° and indirect indexing via indexing plate 1:120 = 1 turn = 3° - Swivelling control panel - Central lubrication - Electrical schematic Nwjdpfjwd Szbox Agxjf Installation dimensions L x W x H: 2000 x 1650 x 2250 mm Weight: approx. 2800 kg Good condition

Stanje: rabljeno, Universal Milling Machine DECKEL Type FP 1 Machine No. 52185 Year of manufacture: 1968 Travel range X: 300 mm Y: 150 mm Z: 340 mm Nodpfsdzqb Ssx Agxewf Table size 600 x 250 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 steps Motor power 1.0 and 1.4 kW, pole-switchable Power supply 380 Volt, 50 Hz - Powered feed on X and Z axes - Two motor speeds and 8 gear stages - Quill travel on vertical milling head 60 mm - Fixed angle table - Coolant system integrated in machine base - Separate control cabinet - Support bracket with counter bearing for horizontal milling SK 40 Required floor space (L x W x H): 1200 x 1100 x 1600 mm Weight approx. 1000 kg In very good condition

Stanje: rabljeno, Universal tool milling machine MAHO type MH 800 P with digital display and HEIDENHAIN TNC 121 path control Serial no. 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently rarely used in the workshop of an electronics company. Travels: X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm, 18 steps Feed rate X, Z axis: 10-500 mm/min, stepless Feed rate Y axis: 5-250 mm/min, stepless Rapid traverse X, Z axis: 1.4 m/min Rapid traverse Y axis: 0.7 m/min Nsdpfx Agev Amryoxewf Quill travel vertical: 100 mm Quill feed vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill travel horizontal: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC path control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02 - 0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in machine base - Universal rotary table, 360° rotatable, 30° swivel and tiltable, 225 mm cross travel - Rotary table with direct division 72 x 5° and indirect division via indexing disc 1:120 = 1 rev. = 3° - Swiveling operator panel - Central lubrication - Operating manual - Machine mounted on a steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Required floor space L x W x H 2650 x 2000 x 2450 mm Weight 3700 kg + 550 kg steel plate Total weight 4250 kg (measured) In very good condition

Stanje: rabljeno, Universal tool milling machine DECKEL type FP 1 Machine No. 28317 Year of manufacture: approx. 1960 Travels X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Horizontal spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor power 0.8 and 1.1 kW, pole-changing Power supply 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gearbox steps Nwedpoiy Ekvefx Agxef - Feed on X and Z axes - Coolant system with mechanical pump integrated in the machine base - Quill travel on the vertical milling head 60 mm - Vertical milling head swivels +/- 90° - Metal base made of angle iron with machine feet Space required (L x W x H): 1100 x 900 x 1650 mm Weight: 650 kg In good condition

Stanje: rabljeno, Universal Milling Machine, Console Milling Machine SIMPLON Type UN-S / Universa-Super Machine No.: 17220 Year of manufacture: 1979 Travel paths X: 900 mm, Y: 240 mm, Z: 400 mm Table size 1300 x 300 mm Tool holder SK 40 - M16 Spindle speed 50 - 1750 rpm, 16 steps Feed rate X, Y, Z axis 11 - 500 mm/min. Rapid traverse 2400 mm/min Main spindle motor power 4 kW Connected load 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, Type VRZ 750 (X-scale missing) - Main spindle drive via 16-speed gearbox - Clockwise and counterclockwise rotation of the milling spindle - Vertical milling head swivels +/- 90° Nodpfx Aoifu Arsgxswf - Milling head ram manually adjustable, 700 mm travel - Side counter bearing with dovetail guide, manually adjustable, 450 mm - Mechanical tool clamping with M16 draw bolt - Coolant system integrated in machine base - Electrical control cabinet mounted on the machine Required space (L x W x H): 1600 x 1850 x 1850 mm Weight: 2400 kg In good condition

Stanje: rabljeno, CNC Universal Milling Machine MAHO Type MH 400 E Machine No. 43072 Year of manufacture: 1989 Travel range X: 400 mm Y: 250 mm Z: 375 mm Table size 700 x 270 mm Distance spindle nose / table max. 410 mm Tool holder ISO 40 with retention stud type B Spindle speed 80 - 4000 rpm, 18 steps Feed speed 1-1500 mm/min, infinitely variable Rapid traverse (X, Z and Y) 2.5 m/min Nwjdpfsh Ic Ufex Agxef Quill movement vertical 50 mm Spindle drive 2.2 kW Power connection 400 Volt, 50 Hz, 19 kVA - Swivelling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - Hydro-mechanical tool clamping - Swivelling device for the vertical milling head - Splash guard enclosure for the table with 3 upward-folding doors - Electrical control cabinet mounted on the machine - V24 (RS 232) interface for data transfer - 52,470 operating hours, main switch on - Fixed angle table - Coolant unit with separate pump located under the machine - Central lubrication system Vogel - Operator's manual, electrical schematic Required space (L x W x H) 2250 x 1800 x 1850 mm Weight approx. 1.5 tons In good condition

Stanje: rabljeno, Universal tool milling machine DECKEL Type FP 1 Mach. No. 33064 Year of manufacture: approx. 1960, overhauled in 2012 Travel paths X: 300 mm Y: 150 mm Z: 330 mm Nodpfx Agsdzp T Eoxewf Table size 600 x 210 mm Spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor power 1.1 and 1.4 kW Power supply 380 Volt, 50 Hz - Feed on X and Y axes - Quill adjustment on vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Separate control cabinet with cable and plug connection Required space L x W x H 1100 x 900 x 1600 mm Weight approx. 900 kg Good condition Machine was overhauled in 2012.

Stanje: rabljeno, številka stroja/vozila: 007809, Vrsta nameščene obrobe: tanka obroba, močna obroba, masiven les Nodoyhbn Depfx Agxjwf Sistem lepljenja: EVA, PUR Stroj za lepljenje robov: stroj 1 Največja širina plošče: 1200 mm Največja podajalna hitrost: 40 m/min Delovni agregati, desna stran: 8 kos Delovni agregati, leva stran: 8 kos

Stanje: rabljeno, CNC Milling Machine ABENE Type VHF-360TI Serial No. 36084 Year of manufacture: 2008 CNC Control: HEIDENHAIN TNC 320 Travel Ranges X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle taper SK 40 Spindle speed 55 - 3000 rpm, 2 ranges Feed rate 30 - 4000 mm/min, infinitely variable Rapid traverse speed (X + Y axes) 4000 mm/min Rapid traverse speed (Z axis) 2000 mm/min Distance spindle nose to table 20-495 mm Spindle drive motor power 7.5 kW Electrical connection 400 V, 50 Hz - CNC path control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces Nwjdpfety A Ehjx Agxef - Electronic handwheel - Mechanical handwheels for X and Y axes - Spindle speed manually shiftable in 2 gear stages (Stage 1 = 55-700 rpm) + (Stage 2 = 701-3000 rpm) - Inclined bed design with laterally mounted swivel spindle head +/- 50° - Inclined bed adjustment manually via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with separate electric coolant pump - Machine lamp - Control cabinet fixed to machine - Read operating hours controller on = 14,780 hrs - Read operating hours machine on = 12,980 hrs - Read operating hours program run = 400 hrs Space requirements L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 2103 XXXXXX, The FPS 300M, successor to the DECKEL FP1. Based on our many years of service experience, we decided to develop and manufacture our own milling machines. The FPS 300M is a conventional milling machine, perfectly suited for both training and production. Control 3 axes – FPS Aktiv – digital display Spindle speed 40 – 2000 rpm, geometrically stepped direct-drive gearbox with 16 gear stages for maximum torque and milling performance Feed 5 to 500 mm/min, continuously adjustable Rapid traverse 1.5 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Nodpfoh I Nqwox Agxowf Table Rigid angle table 600 x 210 mm Equipment • Vertical and horizontal spindle • Milling head manually tiltable +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-support • etc. Further technical data can be found in the attached data sheet.

Stanje: rabljeno, številka stroja/vozila: 499, Universal punching machine SKAG SP347, Serial No. SP347 Online video inspection via Skype video available. We would be pleased to welcome your visit – more machines in stock. Available immediately – viewing possible. In stock in Emskirchen / Nuremberg – machine can be tested. Nwjdpfxjh Axmbe Agxjf

Stanje: rabljeno, Leto izdelave: 1997, številka stroja/vozila: 11968, potovalna razdalja osi X: 630 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, skupna masa: 6.000 kg, rabljeni HERMLE univerzalni rezkalni stroj, model U 630 S Letnik 1997 s krmiljenjem Heidenhain TNC 410 in popolnoma zaprto varnostno kabino Potezi: X=630, Y=500 in Z=500 mm Velikost mize: 900x528 mm s 7x T-utorov 14 mm, vretena SK40 DIN 69871 Nedpfoygwz Rsx Agxswf Število obratov: Menjalni razred 1 = 20-1.428,6 /min, menjalni razred 2 = 1.428,6-7.000 /min Ločen rezervoar za hladilno tekočino 120 litrov, električni ročni koles Heidenhain HS410, merilna tipala Heidenhain TS 220 s premičnim vozičkom za orodje za SK40 vpenjalne posode vklj. cca 80 kosov vpenjalnih posod. Stroj se nahaja pri nas na naslovu 71334 Waiblingen-Beinstein in si ga lahko po predhodnem telefonskem dogovoru ogledate.

Stanje: novo, WM6350F ROGI univerzalni rezkalni stroj 400V-3F Vrtalna zmogljivost jeklo ----- 50 mm Rezkalna zmogljivost jeklo ----- 25 mm Obodna rezkalna zmogljivost ----- 100 mm Horizontalni motor ----- 2,2 kW Vertikalni motor ----- 2,2 kW Območje vrtljajev horizontalne vretena ----- 60 ~ 1350 obr/min Območje vrtljajev vertikalne vretena ----- 90 ~ 2000 obr/min Vpenjalo vretena ----- ISO 40 Miza ----- 1270 x 320 mm Teža ----- 1500 kg Nodpega T Arsfx Agxjwf VKLJUČENO * 3-osni digitalni odčitek znamke SINO * Avtomatski podajalnik delovne mize X, Y, Z * Avtomatski podajalnik vretena * LED razsvetljava * Hladilni sistem * Luksuzna upravljalna omara * Nagibna rezkalna glava levo/desno 0 - 45 stopinj * Vrtljiva delovna miza MOŽNOST * Pnevmatska vpenjalna palica

Stanje: rabljeno, Število vreten: 1 kos Moč motorja: 1,1 kW Vpenjalna višina: cca 100 mm Delovna širina: 650 mm Nožno upravljan vrtalni stroj Scheer tip BM340 Nodpfslfcnwex Agxewf

Stanje: novo, x-travel 1000 mm y-travel 360 mm z-travel 400 mm Spindle taper ISO 40 ISO Table: 1370 x 300 mm Feed rate: 30–830 / 23–625 mm/min Spindle speed: 45–1660 rpm Spindle-to-table distance: 60–460 mm Rapid traverse Z-axis: 750 mm/min Overhang: 95–575 mm Total power requirement: 3.0 kW Machine weight approx. 1505 kg Dimensions (L x W x H): 1740 x 1860 x 1900 mm The universal milling machine UWF 110 Servo is suitable for performing light to medium milling operations. Thanks to its great versatility and simple retooling, it can be efficiently used in workshops for machining small to medium-sized production runs. Special features of this machine include the swiveling worktable, flat guides in the Y and Z axes, and servo drive for feeds and rapid traverse in all axes. - Large-dimension rectangular guides on Y and Z axes ensure increased stability Njdsxaak Topfx Agxjwf - 8x automatic feeds and rapid traverse in all axes - Driven by servomotor - Universal milling head "Huron" system, adjustable to any angular position - Swiveling control panel with ergonomically positioned switches - Heavy machine base made of cast iron for vibration-free operation - High running smoothness thanks to ground, oil-bath lubricated gear wheels - Overarm with clearly arranged shift gearbox for spindle speed - Digital position display for X, Y, and Z axes included - Precision surface-ground cross table with T-slots Scope of supply - 3-axis digital readout ES-12 H with LCD display - Drawbar M16 - LED machine lamp - Feed drive for X, Y, and Z axes - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combination stub milling arbor ISO 40 / 27 mm - Coolant tray - Adjustable safety guard - Central lubrication for X, Y, and Z axes - Operating tools

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Cost-effective single-column, microprocessor-controlled universal testing machine for tensile, compression, and bending tests up to 3 kN. User-friendly Windows software for universal test procedures; simple tests also possible without a PC. Made in Germany. Standard scope of delivery: • Machine with sensor (choice between 50 N and 3 kN) • Accuracy class 0.5 Nsdpod H S Hijfx Agxowf • Basic Windows software • 2-year warranty Optional equipment: • Comprehensive clamping tools (mechanical, pneumatic, and hydraulic), e.g.: Compression plates Screw and wedge grips Bending devices Custom solutions according to customer specifications • Extensometers / strain gauges: Clip-on and long-travel extensometers • Temperature and climate chamber • Windows Software PM-Soft-Smart for universal applications, freely programmable • Commissioning and training

Leto izdelave: 2025, stanje: novo, Cost-effective dual-column microprocessor-controlled universal testing machine for tensile, compression, and bending tests up to 10 kN. User-friendly Windows software for universal testing sequences; simple tests can also be performed without a PC. Nedsd H S R Ujpfx Agxowf Made in Germany Standard Equipment: • Machine with sensor (selectable between 50 N and 10 kN) • Accuracy class 0.5 • Basic Windows software • 2-year warranty Optional Equipment: • Extensive range of grips and fixtures (mechanical, pneumatic, and hydraulic), e.g.: Compression plates Screw and wedge grips Bending fixtures Special designs according to customer specification • Extensometers: Clip-on and long-travel models • Temperature and climate chamber • PM-Soft-Smart software For universal applications, freely programmable • Commissioning and training

Stanje: rabljeno, Model: Spanavello moulding machine, 6+1 spindles, ribbed table, max width 190 mm. Spindle configuration: bottom, right, left, right, top, bottom, universal, PTO drive, used. Nodpjx Tt Diofx Agxjwf

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1986, Funkcionalnost: nepreverjeno, številka stroja/vozila: 7393, potovalna razdalja osi X: 500 mm, pomik osi Y: 360 mm, pomik po osi Z: 400 mm, največja hitrost vrtenja: 4.000 obr/min, model krmilnika: Siemens 810, Brez minimalne cene – zagotovljena prodaja najboljšemu ponudniku! TEHNIČNI PODATKI Pomik X-os: 500 mm Pomik Y-os: 360 mm Pomik Z-os: 400 mm Območje vrtljajev: 20 - 4.000 min⁻¹ Dimenzije mize: 800 x 390 mm Območje podajalnih hitrost: 1 - 2.000 mm/min Hitri pomik: 5 m/min Število T-utorov: 6 Širina T-utorov: 14 mm Razdalja med T-utoroma: 63 mm Vpenjalni stožec: SK 40 Število prestavnih stopenj: 4 PODROBNOSTI O STROJU Tip krmilnika: Siemens 810 Skupna priključna moč: 9 kW Dimenzije in teža Prostorske mere (D x Š x V): pribl. 2.500 x 2.900 x 1.900 mm Nedpsyv A A Hofx Agxswf Teža stroja: pribl. 2.000 kg

Leto izdelave: 1997, stanje: zelo dobro (rabljeno), številka stroja/vozila: 1095, Spoštovane stranke, trenutno vam ponujamo univerzalni rezkalni stroj za modelarstvo in orodjarstvo znamke Zimmermann. Tu so tehnični podatki stroja: Delovna miza: 630 x 490 mm Dodatna miza: 490 x 400 mm Nodpfx Agoxy Ntqsxswf Krožno gibanje: 360° Nagib: 2x 90° Vpenjalni utor: 14 x 25 mm Moč: 1,1 kW Število vrtljajev: 560 - 14.000 min⁻¹ Nosilec orodja: ISO30 / SK30 - Motorna zavora - Motorizirano nastavljanje višine - Digitalni prikazovalnik z meritvami Heidenhain - CE označba - Omara s predali Potrebni prostor: 1.400 x 1.520 x 1.970 mm Teža: 790 kg Stroj je bil zaradi čiščenja v celoti razstavljen, vključno s podpornim delom. Tehnično in vizualno je stroj v odličnem stanju! Veselimo se vaših vprašanj in povpraševanj.

Stanje: rabljeno, Universal tool milling machine ORADEA EURO-MILL STIMIN (Romania) Type FUS 32 Serial no. 5591 Year of manufacture 2009 Travel X: 560 mm, Y: 320 mm, Z: 400 mm Table size 950 x 450 mm Tool holder (vertical head) ISO 40 - M16 Tool holder (horizontal spindle) ISO 40 - S20x2 (like Deckel) Spindle speed 25-2000 rpm, 18 steps Feed rate 5-400 mm/min, 18 steps Rapid traverse rate 1400 mm/min Main spindle motor power 3 kW Power connection 400 Volt, 50 Hz, 10 kW - 3-axis digital readout and glass scales from HEIDENHAIN, Type ND 780 - Vertical milling head with quill, tiltable +/- 90° - Quill travel on vertical head 100 mm - Manual tool clamping with M16 thread - Counter bearing for horizontal milling with bearing bush Ø 48 mm - Central lubrication system - Electrical control cabinet on machine side Nedpfxox Hkd He Agxowf - Coolant device in machine base - Machine lamp - includes 2 tool holders - Operating manual with wiring diagram Required space (L x W x H) 1800 x 1600 x 1800 mm Weight 1650 kg Very good condition

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Lamina Gluer je ročno podajan stroj za zgibanje, lepljenje in lepljenje trakov v liniji. V zelo dobrem tehničnem stanju, po popolni prenovi. Nastavitev brez orodja omogoča hitro spremembo tudi pri kratkih serijah. Možnosti za stroj vključujejo hladno lepljenje, zadnjo podporno enoto, aplikator traku itd. Stroj je na naši lokaciji, možen je preizkus na kraju samem. Nedpfx Ajyzfkksgxswf Maksimalna velikost pol: Širina: 2200 mm (87") Minimalna širina pol: 70 mm (3") Elektrika: 208 V, 3 faze, 60 Hz; ali 400 V, 3 faze, nevtralni, 50/60 Hz; ali po naročilu Zahteve za zrak: 6 bar; 80 psi; 34 CFM, približno 50 l/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Prodam profesionalni lepilni agregat Robatech RoBa 30, švicarske izdelave (Robatech AG CH-5630 Muri). Naprava je popolnoma delujoča, kompletna in pripravljena za uporabo. Idealna za pakirne linije, zgibne-lepilne stroje, kartonažerje ter stroje, ki zahtevajo natančno doziranje talilnega lepila. Tehnični podatki: * Model: RoBa 30 * Leto izdelave: 1984 * Zmogljivost: 900 g/min * Maks. hidravlični tlak: 40 bar * Maks. zračni tlak: 5 bar * Maks. delovna temperatura: 200°C * Napajanje: 240 V * Poraba toka: 10 A * Prenos črpalke: 1:8 * Identifikacijska ploščica je čitljiva, manometer deluje Stanje: * naprava v dobrem tehničnem stanju * kompletna, brez manjkajočih delov * švicarska kakovost – zelo trdna konstrukcija Nwsdpfx Agsum Hufsxof

Leto izdelave: 2018, stanje: kot nova (razstavni stroj), We are offering here an as-new machine for gluing boxes, including a corner gluing unit and a wide range of high-quality tools. Box formats: Minimum: 80x65x10 mm Maximum: 430x350x120 mm Further details and pricing available upon personal consultation. Nedpfx Aog U Irwjgxswf

Stanje: rabljeno, Leto izdelave: 1977, Technische Details: x-Weg: 1050 mm y-Weg: 500 mm z-Weg: 500 mm Spindelaufnahme ISO: SK40 Nsdsu Ndd Repfx Agxewf Spindelkopf schwenkbar links und rechts: 90° Pinolenweg: 180 mm Drehzahlbereich: 36 - / 18 Stufen U/min Vorschub: X+Z: mm/min Vorschub: Y: bis 900 mm/min Eilgangsgeschwindigkeit: X/Z: / Y: 900 mm/min Tischaufspannfläche: 1200 x 550 mm Gesamtleistungsbedarf: ca. 10 kW Maschinengewicht ca.: 4400 kg Abmessungen der Maschine ca. LxBxH: 3,1 x 2,5 x 2,2 m Konsolenausführung mit neigbarem, kippbarem und schwenkbarem Tisch sowie verstellbarem Vertikalfräskopf. Die Maschine ist mit einer 3-Achsen Digitalanzeige (Auflösung 0,01 mm) ausgestattet, mit Vorschub- und Einzelantrieb für alle drei Achsen, stufenloser Vorschub. X-Achse: Support längs = 700 mm; universeller Frästisch längs 350 mm; insgesamt längs: 1050 mm Zubehör: siehe vergleichbar auf den Fotos