Thermo Fisher Scientific Shandon Cytospin 4 nakup rabljenega (60.046)

Stanje: zelo dobro (rabljeno), vklj. kovček, polnilni priključek, merilni kabel, 16 GB pomnilniška kartica Pgsdpfxoy Edb Ne Agxok

Stanje: rabljeno, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column identification: Electronic identification system for up to 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow distributor: Nano-, capillary, or thermostated micro-flow distributor with flow distributor identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and back pressure Column flow rate range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Selectable flow rate range: 50 nL/min to 1000 nL/min (using a nano-LC splitter) 0.5 μL/min to 10 μL/min (with a capillary LC splitter) 10 μL/min to 160 μL/min (with a micro-LC splitter) Gradient delay time: Typically < 1.5 min at 200 nL/min to splitter outlet Max. column pressure: 35 MPa (4900 psi) Wetted materials: Quartz glass, stainless steel (1.4571, 316L), PEEK; Waste line: PTFE, aluminum oxide (Al₂O₃) Safety features: Humidity sensor, gas sensor, and leak sensor for the flow control valve VWD Optical design: Double-beam photometer (monochromator) Multi-wavelength UV/VIS detector Light source: VWD-3400RS: Deuterium lamp and tungsten lamp Temperature control for both lamps Wavelength range: 190 to 900 nm Tungsten lamp recommended for wavelengths > 600 nm. Noise: Pjdpfoxtb Efsx Agxogk At one wavelength:

Stanje: rabljeno, Ta ponudba je za VELP ZX4 Mixter Vortexer Naprava je v popolnoma delujočem stanju in je pripravljena za takojšnjo uporabo. VELP ZX4 je robusten in visoko zmogljiv vortex mešalnik, namenjen vsakodnevni laboratorijski uporabi. Z variabilnim nadzorom hitrosti, patentiranim infrardečim (IR) načinom senzorja in širokim naborom dodatne opreme je idealen za laboratorije, ki potrebujejo ergonomsko in prilagodljivo delovanje. Ključne značilnosti in prednosti Pedpfx Agsxhfzgjxsgk Variabilno nastavljiva hitrost Elektronsko nadzorovano vrtinčenje s hitrostmi od 0 do 3.000 vrt./min, primerno tako za blago mešanje kot intenzivno agitacijo. Dva načina delovanja Način IR senzorja (patentiran): Mešanje se samodejno aktivira, ko je zaznana epruveta – pritisk na glavo ni potreben. Neprekinjen način: Omogoča stalno mešanje brez interakcije uporabnika. Univerzalna kompatibilnost napajanja Deluje v univerzalnem območju napetosti/frekvence (100–240 V, 50/60 Hz), kar je idealno za mednarodne laboratorije. Združljiv z različnimi nastavki za epruvete, mikroplošče in majhne bučke. Vsa dodatna oprema se pritrdi s preprostim pritiskom – brez uporabe orodja. Visoka kemična odpornost Ohišje iz tehno-polimera nudi optimalno odpornost proti pogostim laboratorijskim kemikalijam in topilom. Izjemna stabilnost Osnova iz cinkove zlitine zagotavlja odlično stabilnost tudi pri visokih obratih. Velike gumirane protizdrsne noge poskrbijo, da mešalnik med delovanjem ostane trdno na mestu. Zaščita IP42 Oblikovan z zaščito IP42 pred vdorom delcev in škropljenjem tekočin – varen za zahtevna laboratorijska okolja. Uporaba Mešanje mikrocentrifugskih cevk, PCR cevk, vials in mikroplošč. Kot nalašč za biologijo, kemijo in biokemijske laboratorije. Odličen za ponavljajoča se opravila – IR način zmanjšuje obremenitev zapestja.

Stanje: rabljeno, Naprodaj so Multivac orodja za oblikovanje in zapiranje, prikazana na slikah. Na voljo sta 2 kompleta, vsak za širino folije 420 mm. Multivac 19.200.1240.95. Velikost pladnja: 6x11 cm x 18 cm. Cena: 2000 EUR. Drugi ima velikost 9x11,5 cm x 11 cm, številka artikla 105793236, cena 2000 EUR. Pgsdswth Uijpfx Agxsk

Stanje: rabljeno, Ta ponudba je za sistem odtaljevanja Thermogenesis Thermoline MT204 Sistem za odtaljevanje ThermoGenesis Thermoline™ predstavlja najnovejšo tehnologijo za hitro in zanesljivo odtaljevanje plazme in krioprecipitata, zasnovano za uporabo v kliničnih in transfuzijskih laboratorijih. Naprava zagotavlja varnost, hitrost in preprečevanje kontaminacije. Ključne lastnosti Hitro odtaljevanje: Običajen čas odtaljevanja je 15–18 minut pri začetni temperaturi -40°C za paket plazme po 220 ml. Brez stika z vodo: Plazemski paketi so shranjeni v posameznih zaprtih žepih, kar jih popolnoma ločuje od neposrednega stika z vodo. To omogoča: - Ničelno tveganje za kontaminacijo. - V primeru poškodbe ali pretrganja se vsebina varno zadrži v žepu. Sistem za agitacijo: Integriran mehanizem za nežno masiranje suspenziranih paketkov, ki pospeši proces odtaljevanja. Kapaciteta: Model MT204 omogoča hkratno odtaljevanje do 4 plazemskih vrečk. Na voljo so tudi drugi modeli: - MT210: sprejme 10 paketkov - MT202: sprejme 2 paketka Podpoxzh Ipjfx Agxsgk Nadzor temperature: Standardna nastavitev: 35°C ±1°C Model MT204 ponuja tudi dodatno nastavitev na 37°C za specializirane potrebe odtaljevanja. FDA certifikat: MT204 ima odobritev FDA za odtaljevanje plazme in gliceroliziranih rdečih krvničk. Uporabniški vmesnik: Intuitivna nadzorna plošča z enostavnim upravljanjem na dotik in prikazom vzdrževanja.

Stanje: rabljeno, Leto izdelave: 2014, Použit stroj Leto izdelave: 2014 Oprema in tehnični podatki: - Delovno območje X: 3.740 mm Pgsdpfxsx Hllxs Agxjk - Delovno območje Y: 1.570 mm - Delovno območje Z: 350 mm - 4. os: prisotna - 5. os: 5-osno vreteno, motor 12 kW - z dodatno blokado C-osi - Mesta za menjavo orodja: 24 s ploščnim menjalcem; 10 na levi strani stroja - Vertikalna vrtalna vretena: 12 - Strojna miza: konzolna miza - Avtomatika pozicioniranja mize: prisotna - 6 delovnih podpor tipa e-motion - Poseben sistem vpenjanja za okvirje - Programska oprema: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 delovni polji za nihajno obdelavo - z avtomatskim centralnim mazalnim sistemom - z mobilnim upravljalnim pultom in PC monitorjem - s klimatsko napravo za elektro omaro - z vakuumsko črpalko 90 m³/h - z ročnim upravljalnikom - Vključeno: 12 vpenjal za okvirje, 8 velikih in 4 srednje vakuumske priseske Razpoložljivost: takoj Lokacija: Röllbach

Stanje: rabljeno, prevoženi kilometri: 440.000 km, moč: 250 kW (339,91 KM), prva registracija: 04/2012, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: oranžna, vrsta prenosa: mehanski, emisijski razred: Euro 5, dolžina tovornega prostora: 4.450 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 300 mm, Oprema: klimatska naprava, * MAN TGM 18.340 * Tristrani kiper * Prva registracija: 2012 * 440.000 km * Euro 5 * Listnate vzmeti - listnate vzmeti * 4 x 2 * Ročni menjalnik * Klima * Vlečna kljuka * Medosna razdalja: 3,60 m * Lastna teža: 7.100 kg * Nosilnost: 10.900 kg * Dimenzije kiperskega zaboja: 4,45 x 2,42 x 0,30 m Pjdpfx Agoy Eu Aqjxsgk * Termo cisterna: * AMTEC ASB 09.700 * Leto izdelave: 2024 * Prostornina: 5,1 m³ * Lastna teža: 1.650 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: NR: 220.10.029.19, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj visokokakovostni robni lepilni stroj Format4 Tempora 60.06 EL – takoj pripravljen za delo! Dvignite svojo proizvodnjo na višjo raven s tem malo rabljenim robnim lepilnim strojem Format4 Tempora 60.06 EL v odličnem stanju. Stroj je zasnovan za industrijsko uporabo in zagotavlja izjemno natančnost ter popolno površino vsake plošče. - Visokonatančno avtomatsko lepljenje robov Psdpfx Agey Dg N Texsgk - Enota za predrezkanje za popolno pripravo roba - Zanesljiv in konstanten sistem lepljenja - Popolna obdelava: porezovanje, rezkanje, poliranje - Enostavno upravljanje in zanesljivo delovanje Vključene dodatne opreme: - Rdeč zračni rezervoar (kot je prikazano na fotografijah) - Dodatni ogrevani posoda za lepilo – idealna za hitro menjavo različnih barv lepila Stroj je skrbno vzdrževan, zelo malo rabljen in popolnoma operativen – pripravljen za neposredno uporabo v proizvodnji. Stroj je na voljo zaradi reorganizacije obrata. Za več podrobnosti ali ogled nas kontaktirajte.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. Pgodpfxsd Tbbdj Agxek The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) Pgodpfefdkb Tjx Agxjk - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times Pgodpjd Tqalsfx Agxok - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised Podpfjfdkb Ujx Agxegk - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg Pgjdpeguk A Hofx Agxok - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) Podpfx Agjfdkbhexogk - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Pgedpfx Ajguk Dksgxok Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. Psdpfx Aeguk Dvegxegk For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Stanje: rabljeno, prevoženi kilometri: 248.811 km, moč: 130 kW (176,75 KM), prva registracija: 03/2009, vrsta goriva: dizel, skupna masa: 7.490 kg, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 4, število sedežev: 2, prostornina tovornega prostora: 29 m³, dolžina tovornega prostora: 5.081 mm, širina tovornega prostora: 2.468 mm, višina nakladalnega prostora: 2.300 mm, Leto izdelave: 2009, Oprema: filter saj, TGL 8.180 BL refrigerated box truck, 4.60 m, with swing doors * THERMOKING TS 200 (diesel engine) and 380 V ELECTRIC standby cooling * Vehicle reference number for customer inquiries: 4163 * Air suspension * Cruise control * Particulate filter * Air-operated engine brake * Power steering * Steel rims * Speed limiter * Electric side mirrors * Environmental badge (green) * Two-seater * Full service history * 2/3 doors No liability for printing or typographical errors Sale to traders only Subject to prior sale and changes* Modifications, prior sale, and errors excepted. The description serves the identification of the vehicle and does not constitute a warranty in the legal sense. The purchase contract description is binding. * TOP SERVICE + QUALITY * We are happy to offer you a LEASING-FINANCE-INSTALLMENT PURCHASE proposal Warranty insurance available on request with the insurer * TÜV inspection / UVV LBW / tachograph check and installation of OBU device by our local partners * 30-day export license plates All necessary export customs documents available on request * TOLL payment for Toll-Collect can be arranged in-house * Free transfer from Stuttgart airport or Metzingen train station (Württemberg) Pgsdpfx Agsvzu H Njxjk * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTTEMBERG * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit our website at * Constantly over 200 vehicles in stock

Stanje: rabljeno, prevoženi kilometri: 248.811 km, moč: 130 kW (176,75 KM), prva registracija: 03/2009, vrsta goriva: dizel, skupna masa: 7.490 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 4, prostornina tovornega prostora: 29 m³, dolžina tovornega prostora: 5.081 mm, širina tovornega prostora: 2.468 mm, višina nakladalnega prostora: 2.300 mm, Leto izdelave: 2009, Oprema: filter saj, TGL 8.180 BL Refrigerated Box Truck 4.60 m with Rear Swing Doors * THERMOKING TS 200 (diesel engine) and 380 V ELECTRIC standby cooling * Vehicle No. for customer inquiries: 4163 * Air suspension * Cruise control * Particulate filter * Pneumatically operated engine brake * Power steering * Steel rims * Speed limiter system * Electrically adjustable side mirrors * Environmental badge (green) * Two-seater * Full service history * 2/3-door configuration No liability for printing or typing errors Sale to commercial customers only Subject to prior sale and errors. Specification may change without notice. The description is for vehicle identification purposes and does not constitute a warranty in the legal sense. The description in the sales contract is binding. * TOP SERVICE & QUALITY * We are happy to provide you with a LEASING-FINANCING-HIRE PURCHASE offer Guarantee insurance available upon request from the insurer * TÜV / UVV LBW / tacho inspection and OBU device installation can be arranged locally with our partners * 30-day export number plates All export documents are available upon request and must be requested individually * Toll-Collect road charge registration available in-house * Free transfer from Stuttgart airport or Metzingen (Württ) train station * Train station for arrival: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas Pgedpowm S Uysfx Agxjk * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit our website at * Over 200 vehicles in stock at all times

Stanje: rabljeno, lastna masa: 5.229 kg, skupna masa: 32.500 kg, konfiguracija osi: 2 osi, prva registracija: 06/2021, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.340 mm, višina nakladalnega prostora: 1.350 mm, prostornina tovornega prostora: 24 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, barva: siv, Leto izdelave: 2021, prevoženi kilometri: 209.083 km, Oprema: ABS, Lastna teža: 5229 kg, dovoljena skupna masa: 32500 kg, tovorni prostor (D Š V): 7.500 mm x 2.340 mm x 1.350 mm, velikost pnevmatik: 385/65 R22.5, volumen tovornega prostora: 24 m³, 1. os: , 2. os: , zračno vzmetenje, preklopna zaščita proti naletu, prednja dvižna os, elektronski zavorni sistem EBS, orodjarna, nihajna loputa (preklopna), pomična streha, termo korito, priključni vtič 1x15 in 2x7-polni, sistem proti poškropljanju, lahka aluminijasta platišča. Celotno ponudbo vozil najdete na . Želite financiranje? Z Value Added Service vam nudimo individualne možnosti financiranja, full-service in telematiko. Z veseljem svetujemo. Pgodpfx Agoy Hmvrsxsk

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 9.150 kg, nosilnost na odsek shranjevanja: 3.050 kg, skupna dolžina: 22.800 mm, skupna višina: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 22.800 mm, 4 dvopolna paletna regala (M35112711-3) vsak 5,7 m dolg, 3,5 m visok, 1,1 m globok, vsak s 2 polji, širokimi 2,7 m, vsak s 3 nivoji prečk, nosilnost na polje 3000 kg. - 12 okvirjev (RM3511 - RAL5019) - 24 talnih plošč, podlag, pritrdilni material - 48 talnih sider (ZZBA1210) - 48 posameznih prečk (T2711 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so vijačeni, ne predmontirani Pjdpfxjyz Iccs Agxogk Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže - razklad tovornjaka izvaja kupec z lastno dvižno opremo - dobave po celotni Nemčiji, razen otokov! Dobave v EU države po individualnem dogovoru.

Stanje: zelo dobro (rabljeno), Edgebander FORMAT 4 Tempora 60.06 glueBox - used Touchscreen Swiveling control panel Program memory Automatic pressure bridge adjustment Feed via transport chain Extendable workpiece support Diamond jointers for both climb and counter-rotation Glue pot located at the bottom Quick-change glue pot system Suitable for PUR adhesives GLUEBOX system Pressure unit with powered roller Cut-off saw with 2 high-frequency motors Cut-off saw, pneumatically tiltable Flush / radius milling unit Motorized positioning control for milling unit x-motion PLUS Corner rounding unit with diamond-coated cutters Radius scraper blade Radius scraper blade with motorized positioning Flat scraper blade Workpiece-activated flat scraper blade Infeed lock Spraying unit for release agent Spraying unit for lubricant Spraying unit for cleaning agent Year of manufacture: 2022 ----- Technical Specifications ----- Edging thickness, coil material: 0.4 - 3 mm Edging thickness, strip material: 3 - 6 mm Workpiece thickness: 8 - 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen diagonal: 15 inches Jointers dimensions: D 80 x 64 mm Jointers power: 1.1 kW Cut-off saw power: 0.35 kW Milling station power: 0.75 kW Pgodpju R S Nwsfx Agxok Extraction port diameter: 80 + 160 mm Compressed air connection: 7 - 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality Info: - All settings checked - Adjusted to manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Immediately ready for operation

Stanje: dober (rabljeno), 4-postajni knjižnovezni stiskalnik za lepljenje blokov MURO 4 x 5000 A4/HAD Trdna konstrukcija, vodoodporna plošča in pocinkane komponente. Stroj je v brezhibnem stanju. Tehnične specifikacije: Format: 350x320x550 (Š/G/V) Število postaj: 4 Napajanje: 230V Maksimalna poraba moči: 4kW Teža: 102kg Pgodpfx Aoy Ehnaegxjk Visoka vpenjalna sila, vztrajnika z udobnim oprijemom. Električno sušenje z dvema stopnjama moči: 2 in 4kW Vsak stiskalnik je mogoče nagniti do 45′ Konstrukcija je na kolesih za lažje premikanje.

Stanje: dober (rabljeno), GUK FA 49/4 zgibalni stroj + GUK FA 49/4 prečni zgibalni modul Stroj je v zelo dobrem tehničnem in vizualnem stanju. Format: 490x690 mm. Hitrost zgibanja: 30–160 m/min Oprema: 4 vzporedne kasete na glavni enoti 4 pravokotne kasete na prečni zgibalni enoti Prva kaseta podaljšana. Prilagoditve kasete so na številčnici. Gladko nastavljiva hitrost. Števec z možnostjo porcij in prikazom hitrosti zgibanja. Rietschle kompresor. Orodni valj z veliko število pripomočkov za perforacijo, biganje in rezanje. Povišani pokrovi za zvočno izolacijo. Podajanje s pomočjo vakuuma. Mobilni izhod (prosto stoječa izhodna enota) z gladkim upravljanjem hitrosti. Pgsdpjy Ehk Iefx Agxsk Popolna dokumentacija. Obsežen nabor dodatne opreme.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo 4 kose turbin Schlick - 320 mm, vključno z motorji 7,5 kW. Turbine iz Schlick ROTO-JET RB500 5.2/4/7,5. Tip turbin - 5.2. Količina abraziva - 140 kg/min. Hitrost abraziva na izhodu - 70 m/s. Turbine po generalni obnovi. Stroji za peskanje, peskalniki. Cena za 1 kos - 3000 EUR. Pgodpfx Ajvphf Uogxjk