Stoiber Gmbh Stomill 3000 nakup rabljenega (71.239)

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), Na voljo je popolna polnilna linija z 12-mestnim gravitacijskim in tlačno-polnilnim strojem z integriranim zapiralcem Twist-Off za živilsko industrijo. Polnilna mesta: 12, konstrukcija: rotacijska, viskoznost tekočin: nizka-srednja, zmogljivost polnjenja: pribl. 2000 steklenic/uro, zmogljivost zapiranja: pribl. 1000–1200/uro, rezervoar: toplotno izoliran, prostornina rezervoarja: 35 l/50 l. Gre za popolno polnilno linijo, ki vključuje transportne trakove, zbirno mizo, senzoriko, vrtljive mize, črpalke in formatne dele. Linija je bila leta 2024 izključena iz obratovanja. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Hsdpfxsy Ax Ufo Agxel

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16501575, volumenski pretok: 4.800 m³/h, vhodna napetost: 380 V, moč: 2,5 kW (3,40 KM), Oprema: Na voljo je tipska ploščica, The dirt particles, emulsion and oil mist, as well as smoke generated are captured directly at the source and guided through the individual filter stages. The separated liquid collects at the bottom of the device and can be returned to the machining center via the siphon. In the first filter stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filter stage captures the majority of the fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the level of contamination. The third filter stage consists of a large-area particulate air filter of class H13. A consistent high efficiency of 99.95% for particle sizes from 0.3μ DOP is ensured here. Type testing according to DIN EN 1822-1 H13 permits the recirculation of the filtered air back into the workspace. Hodpfxoyz Sn Ne Agxjl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 39 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MZ-7321/19 / 11024, skupna višina: 2.198 mm, skupna širina: 1.648 mm, skupna dolžina: 3.500 mm, skupna masa: 3.500 kg, premer rotorja: 400 mm, širina rotorja: 850 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, največja hitrost vrtenja: 100 obr/min, moč: 30 kW (40,79 KM), Kot novo enovalni rezalnik / drobilna naprava z manjšimi sledmi uporabe. Uporabljena samo za testne namene. Gred rotorja je opremljena s površinskim oklepom. Kasetni sistem za rotorske nože 34 x 34 mm. Elektromotor 30 kW, skupna inštalirana moč 37 kW, hidravlična moč 3,75 kW, 400 V, 3-fazni. Poleg tega so na voljo novi rezalni noži za rotor in stator kot rezervni deli. Navodila za uporabo v nemščini. Statorski noži so tridelni in nastavljivi. Lijak je zaprt, perforirana plošča 40 mm. Stroj je možno prikazati pod napetostjo. Po nakupu ni garancije. Prosto nakladanje iz obrata – Raesfeld. Podrobne slike so na voljo na zahtevo. Pridržujemo si pravico do vmesne prodaje. Cene so neto. Hsdpfjy E S S Asx Agxsl

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, moč: 2.500 kW (3.399,05 KM), vhodna napetost: 380 V, vhodni tok: 53 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, stiskalna sila: 250 t, dolžina mize: 4.050 mm, leto zadnje generalne obnove: 2007, Oprema: dokumentacija / priročnik, We are offering this used Eisen u. Hammerwerk GmbH – EHT EHPS 25-40 press brake (hydraulic press brake/bending press) for sale. Immediately available. Ready for operation. Being sold due to replacement with a new machine. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control Hodoy D Sy Rspfx Agxsl - Supplied with various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Capacity: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Current type: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require further information, please feel free to contact us by message or give us a call. Machine location: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and modifications.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna širina: 512 mm, skupna višina: 1.952 mm, skupna dolžina: 772 mm, Direct from the manufacturer, the original from Apfel GmbH. Fully assembled, including: - 2 shelves KRB 4700 - 1 storage bin KEN 6422 (No. 62) - 2 storage bins KEN 4322 (No. 42) - 1 waste bin made of galvanized sheet metal - 2 brooms - 1 hand brush - 1 dustpan - 1 set of shadow boards - 1 compartment for cleaning agents - 4 swivel castors with locking brakes Load capacity: 400 kg Dimensions: 512 W x 1,952 H x 772 D (mm) Frame powder-coated in black-grey RAL 7021 (body) Various versions and custom solutions available—we as the manufacturer are happy to support you with your requirements! (See pictures 3+4) Hjdouvigpspfx Agxjl

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Ponujamo nov stroj LOWA GmbH Abfüll- und Verschließsysteme WK12-17 za polnjenje in zapiranje steklenic, letnik 2025. Proizvajalec: LOWA GmbH Abfüll- und Verschließsysteme Model: Zapiralni stroj WK12-17 Tip stroja: Stroj za polnjenje in zapiranje steklenic Letnik izdelave: 2025 Stanje: novo ID kategorije: 679 Hjdpoyybh Aefx Agxsl Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.

Stanje: dober (rabljeno), Leto izdelave: 2013, moč: 4 kW (5,44 KM), obratovalni tlak: 10 letvica, Oprema: hladilni sušilnik, Schneider Unimaster batni kompresor UNM STS 660-10-500 XSDK 2 cilindra, zvočno izoliran, Sesalna zmogljivost 660 l/min, Dobava 520 l/min, 10 barov, Motor 4 kW, 380 V, 50 Hz, Prostornina rezervoarja 500 litrov, popolnoma opremljen z: Hladilni sušilnik DK 600 ECO, Separator olje/voda ÖWAMAT 10, Samodejni izpust kondenzata ECOMAT, Predfilter in fini filter, Hjdpfx Agoy E Iz Tsxel kot videno, lokacija Seevetal, Vmesna prodaja pridržana

Leto izdelave: 2016, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, V primeru vprašanj me lahko kadar koli kontaktirate po e-pošti. Lokacija stroja je v Laupheimu. Hodpfxsya H Uys Agxel

Leto izdelave: 2020, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, gradbena višina: 2.200 mm, število vreten: 3, zahteva za prostor dolžina: 5.000 mm, potrebna širina: 5.500 mm, številka stroja/vozila: 50844458, stopnja avtomatizacije: samodejen, proizvodna zmogljivost: 3.000 enota/h, We are offering this used PIA Automation production line for surgical disposable masks, year of manufacture 2020. The line was operated for only 2.5 years in single-shift operation and its condition can be described as "very good." In addition, the production line includes an integrated compressed air supply as well as a packaging and shrink-wrapping unit. The buyer will also receive raw materials sufficient for the production of approximately 300,000 surgical disposable masks. Year of manufacture: 2020 Operating pressure (pneumatics): 6.0 bar Operating voltage: 3P/N/PE 400V AC 50 Hz Supply line circuit protection: 25 A Short-circuit rating: < 10 kA Hedpfx Aey Ddnmegxel Concept: The line consists of a total of three modules, connected via conveyor belts. In the first segment, the individual consumables are fed by rollers, folded, the nose clip is integrated, welded, and then cut to the correct length. The finished masks are then transported to the next modules via a step conveyor and transport belts. These modules are arranged in parallel, where the ear loops are automatically fed and welded to the masks. If you have any questions or need further information, feel free to send us a message or give us a call.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, WE Flexmaster 400 Laser Welding Machine Year of manufacture: 2010 Laser unit: TruDisk 3302, Trumpf Chiller: P805-17640, Termotek Material: Mild steel sheet and stainless steel sheet Hedpev Ipcfofx Agxol Sheet thickness: 0.6 - 2.0 mm Tube diameter: 80 - 600 mm Tube length: 100 - 1250 mm

Stanje: rabljeno, Leto izdelave: 1994, Mehanska enota za sortiranje in transport Hsdjwtnl Ujpfx Agxjl

Stanje: rabljeno, Odstranjevalec oljne megle, separator emulzijske megle, rabljeni stroj Proizvajalec: IFS Industriefilter Service GmbH Tip: IFM 2000 Skupne mere: Širina: 1170 mm Globina: 700 mm Višina: 1100 mm Teža: 136,5 kg Leto izdelave: 1995 Električni podatki: 400V, 1,5 kW, 3,2 A Velikost filtra: 605 x 615 mm Hsdsyn Rmiepfx Agxol

Leto izdelave: 2013, stanje: rabljeno, Proizvajalec: PAUL VON DER BANK GMBH, Tip: Robotska varilna naprava, Leto izdelave: 2013, Serijska št.: 13.536, Varilni vir, proizvajalec Fronius, tip CM TransPuls Synergic 4000, Hladilna naprava, Varilna enota VR7000CMT, Programirni terminal RCU5000I, Obratna miza, Varilni robot, proizvajalec KUKA, tip KR5-2ARC, Robotska krmilna enota KRC4, Odsesovalna naprava, proizvajalec Plymovent – naprava ni priključena Hjdsyx Exvepfx Agxol

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2027 – 60 kN – New Machine – BROACHING MACHINES MADE IN GERMANY. ==> Information for manufacturing companies or dealers with their own production: It is possible to acquire from us the drawings, rights, spare parts, customer and prospect data, as well as planning and production documents (including documentation for a 9-ton traction variant) of the broaching machine. If interested, please contact us. ==> We will soon have another used machine available, which is currently being overhauled. If you are interested, please contact us promptly. Hodpfx Asuqbnhjgxel ==> New machines are built to order as per customer specification. Short production and delivery times are possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available immediately from stock. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special needles for internal spline cutting, etc.) and accessories are available. Please enquire separately for these. All broaching tools and tool holders from other manufacturers can also be used with our broaching machine! Complete production and assembly are carried out at our facility in Germany. Furthermore, we also offer spare parts (spindles, spindle nuts, motors, gears, and all other necessary components, including electrical items) for Wolff and VADARI SRM broaching machines. Vertical Broaching Machine Type SRM 2027 – NEW MACHINE: The primary application is the production of keyways from 3–28 mm (and beyond), and profiles of similar dimensions. This compact and space-saving machine can therefore be used successfully in small, medium, and large enterprises. The low acquisition cost makes it an attractive option also for small series or single-part production. The drive is provided by a pole-switchable geared brake motor. The maintenance-free double spindle drive ensures smooth operation, a centrally aligned pulling force, and consistent cutting performance. The open tool table allows large workpieces to be easily positioned. In most cases, clamping the workpiece is not required. Stroke adjustment is achieved via adjustable limit switches with stroke limitation. For short hubs/workpieces, multiple pieces can be stacked and broached simultaneously. Broaching needles, mandrels, and spare parts available on request. Technical Data: Pulling force: 60 kN at 3 m/min; 40 kN at 6 m/min Broaching speed: 3 m/min & 6 m/min (Optional: Infinitely variable speed from 0 m/min to 6 m/min via advanced electronics) Return speed: 6 m/min Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: unlimited Work table: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Footprint: 750 x 570 mm Total height: 1510 mm Drive capacity: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volt, 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt, 50 Hz Finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 Safety door: Standard equipment Coolant system: Standard equipment The machine complies with the current Machinery Directive and bears the CE mark.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21_0346, NEW – UNUSED High-performance positioner for manual or robotic welding – lifting and rotating device. Special equipment for specific applications, designed and manufactured by FÖRSTER Welding Systems GmbH. Maximum workpiece diameter: 2500 mm Maximum workpiece weight: 20 tons Hodpfxsurlcro Agxel Dimensions of the welding positioner: 7000 x 3000 x 3750 mm Weight (without counterweight): 20,000 kg Overall dimensions of the entire system: 8900 x 4800 x 3750 mm Total weight of the entire system: 40,000 kg Counterweight included in the scope of delivery. Complete documentation available. Technical support from the manufacturer is available upon request. The machine is located in central Poland.

Stanje: rabljeno, Trivaljni valjar za testo Hsdpfoy Akd Esx Agxsl

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Leto izdelave: 2018, Naprava za proizvodnjo endogenega plina Leto izdelave: 2018 Nova cena: 103.500,00€ neto Hodpox An Rmofx Agxel Proizvajalec: Hammer GmbH Tip: Larus ENDOGEN-40-1,05-E vključuje regulacijo rosišča ali cp Popolnoma avtomatska regulacija zmogljivosti v območju od 50-100% Filter za saj v duplex izvedbi

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 21 A, vrsta vhodnega toka: Enosmerni tok, volumenski pretok: 6.045 m³/h, skupna masa: 1.100 kg, ODSESOVALNIK ALKO ECO JET 60/5 HD Odvod žagovine, odvod prahu, samočistilni filter, podtlak ALKO ECO JET Hsdpeyrqnzofx Agxol Filter se pnevmatsko čisti z impulzi stisnjenega zraka med delovanjem, kar zagotavlja visoko učinkovitost naprave. Idealen za vse vrste suhega prahu pri različnih tehnoloških postopkih. Možna je menjava filtrirnih vreč glede na zahteve in namen uporabe.

Leto izdelave: 1999, stanje: dober (rabljeno), Funkcionalnost: omejena funkcionalnost, !!! Important!!! The systems have now been dismantled. The system components can be inspected on site. For sale here are 2 fully functional SLC (Surface Like Chrome) vacuum coating systems / metallization units manufactured by PVT GmbH. A 3rd non-functional system is no longer available for sale. Complete documentation for the systems is available in paper form and will be handed over upon purchase. In order to operate the systems, a compressed air supply, power supply, and water cooling system are required and must be provided by the buyer. All other PVT processes are, of course, possible as well. The system was primarily used for processing wheel rims. Treatment of other workpieces made of aluminum, steel, or plastic is also possible, such as bathroom/kitchen fittings, motorcycle and automotive add-on parts, door and window handles, etc. What are the advantages of the SLC process compared to conventional chrome plating: - SLC coating is a high-gloss finish optically comparable to electroplated chrome - Significantly more resistant to scratches and chipping - The process is more environmentally friendly and provides outstanding corrosion resistance - Costs are considerably lower Technical data: Chamber internal dimensions approx. 1600 mm diameter, approx. 900 mm height Hjdpsyzdm Rofx Agxsl Type: PVT 1600 SLC Manufacturer: PVT GmbH Year of manufacture: 1998/1999 Documentation: available Control: Allen Bradley PLC (automatic coating process including hardware)

Leto izdelave: 2020, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Sušilnik je namenjen predvsem sušenju blata iz čistilnih naprav ali substrata iz bioplinskih naprav. Material, ki se vnese v sušilnik, vrtinčijo metalne gredi v sušilni komori. Dimni plini iz motorja z notranjim izgorevanjem obdajajo material in povzročajo izhlapevanje vode. Dnevni pretok ca. 10 t. Sušilnik se prodaja z vsemi pomožnimi napravami, kot so polžna dvigala, krmilna omara, dodatni gorilnik, črpalka za kislino, lopute za dimne pline ipd. Podrobnosti z veseljem osebno. Možen demontaža in dostava. Proizvajalec je na voljo za ponovno zagon. Hsdjyx Iztjpfx Agxsl

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F50, For sale is a FiberFlow F50 cooling die by DIL Engineering GmbH – a specially developed solution for structuring alternative proteins in High Moisture Extrusion (HME). This cooling die is ideal for use in research and development, enabling the targeted production of fibrous, meat-like textures that are particularly in demand for modern meat and fish alternatives as well as for snacks and convenience products. The FiberFlow F50 is designed for a throughput of up to 50 kg/h and features a rectangular geometry for optimal flow guidance and fiber formation. The system is modular and can be configured with one or two segments as required. In addition, one or two separate cooling circuits are available, ensuring precise temperature control for consistently high product quality. Integration of inline measurement systems is possible, allowing continuous process monitoring and optimization. Special attention has been paid to hygienic design, ensuring the system meets the stringent requirements of the food industry. Thanks to its well-designed construction, cleaning is straightforward and quick, which is a particular advantage for development operations. The FiberFlow F50 is ideally suited for pilot trials, product development, and recipe optimization in the field of alternative proteins, and can be easily integrated into existing extrusion lines. Hedpfx Ajy D Hrbjgxjl

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 140 kg, skupna dolžina: 900 mm, skupna širina: 800 mm, skupna višina: 2.000 mm, vhodna frekvenca: 50 Hz, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of lasers has become indispensable in many industries. The powerful laser software enables the creation of text, numbers, 2D codes, QR codes, and logos with just a few clicks and little programming knowledge. The software automatically increments serial and article numbers as preset. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically insert them into predefined fields. Using a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W Hodpfxoxuvk Ee Agxol • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optional larger) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal light for operating status display • Max. workpiece height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / door height (pass-through): 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.064 mm, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 800 mm, skupna višina: 2.000 mm, skupna dolžina: 900 mm, skupna masa: 100 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, vhodni tok: 16 A, potrebna širina: 800 mm, valovna dolžina laserja: 1.064 nm, delovna višina: 900 mm, zahteva za prostor dolžina: 900 mm, vrsta laserja: vlakenski laser, Oprema: odsesavanje hlapov, The universal LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on the requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, laser-based permanent marking has become essential. The powerful laser software enables you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be incremented automatically by the software after initial set-up. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a hand scanner is also possible. The standard equipment includes a laptop with mount, Windows operating system, and laser software. Optionally, the LAS 28 XL laser marking system can be outfitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, adjustable Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (optionally larger) • Marking software: EZCAD in German / English • Signal lamp to display operating status • Optional: Rotary axis (3-jaw chuck) • Optional: Digital height measuring system • Optional: Fume extraction (incl. activated carbon filter) • Optional: Extensions for large components (one-sided or double-sided) Hsdjywg Sbepfx Agxsl • Optional: Autofocus system • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Maximum component height: approx. 300 mm • Electrically adjustable Z-axis • Laptop with mount and Windows operating system • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): approx. 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 100 kg

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 7.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DRI 04320080, prevoženi kilometri: 100 km, skupna masa: 7.000 kg, vrsta goriva: dizel, barva: modra, obratovalna teža: 14.000 kg, največja dovoljena obremenitev: 15.000 kg, stanje verige: 50 odstotek, Premer palice (maks.): 61 mm, Premer cevi (maks.): 400 mm, Oprema: gumene gosenice, hidravlično kladivo, kabina, German horizontal drilling rig for boreholes up to 200 meters in length, with a thrust/clamping force of 15 tons plus percussion (28 tons) from a hydraulic hammer. Rubber tracks, maximum speed 3 km/h. Suitable for installation of pipes up to Ø 400 mm underground. Drilling depth up to 5 meters with wireless navigation. Manufacturer: TRACTO-TECHNIK GmbH & Co, Year: 2004, 7,800 operating hours. Main components and assemblies: - Hydraulic-driven carriage for rods, HATZ 4-cylinder diesel engine, operator cabin - 3 rod boxes (each box contains 48 rods x 3 m) = 144 rods (432 meters) Operating options: 1. Rod manipulator for automated rod handling 2. Semi-automatic rod clamping/pulling system Mixing unit (8056D) with hydraulic powerpack (TT-M2), DRI 8904.B DEUTZ 4-cylinder diesel engine, bentonite pump R-72, two bentonite preparation tanks of 4,000 liters each, two BÖRGER rotary pumps for mixing Connecting cable to mixing unit Bentonite hose reel 2 drilling heads Ø110 reamer, 5t swivel Reamers Ø280 with swivel, Ø315 with swivel, Ø385 with swivel Eclipse navigation system Hjdpjy H H Uuefx Agxol New spare working components (adapter, shaft, bushing) Price incl. VAT.

Stanje: dober (rabljeno), Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for assembly: Number of shelving rows: 01 pcs. Shelf length: 1,660 mm Number of bays per shelving row: 01 pcs. Scope of delivery includes: 02x shelf uprights, used Material finish: sendzimir galvanized Design: slotted Adjustable pitch: 26.5 | 26.5 mm Hjdsyzyt Hepfx Agxel Frame profile dimensions: 31 x 60 x 0.88 mm Weight / pcs.: approx. 8.92 kg Incl. shim and base plates (Shelf uprights are pre-assembled) 2,490 mm high 600 mm deep 06x wire mesh shelves, used Material finish: sendzimir galvanized for upright depth: approx. 600 mm Overall width: approx. 1,600 mm Overall depth: approx. 590 mm Overall height: approx. 30 mm Frame profile: approx. 25 x 25 mm Mesh size: approx. 68 x 50 mm Weight / pcs.: approx. 6.90 kg Note: Water-permeable (up to 70%), suitable for sprinkler systems and thus optimized fire protection. Air-permeable – allows good air circulation, e.g. in cold storage rooms. Light-permeable – creates a bright working environment in the warehouse. 24x shelf supports, used Suitable for slotted uprights Material finish: sendzimir galvanized 01x cross brace, used Type designation: KV31313 Weight / pcs.: approx. 0.405 kg each Material finish: sendzimir galvanized 01x load capacity sign With details of bay and shelf load capacities, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Transportation or shipping beyond this is subject to additional costs, which can be requested separately depending on the place of delivery and scope of delivery.