Sigma Mission 1 nakup rabljenega (80.847)

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Kledpfxjt Hw D Rj Abxju Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1983, Schenck M480-1/450 Visokonatančna dinamična horizontalna balansirna naprava s krmilnikom CAB 690 (1983) Klodpfxoy Dr Une Abxou Razpon vrtljajev: 20–5.000 rpm. Največja teža rotorja: 450 kg. Inventarna št.: 10_627. Serijska št.: AHG 0459 (1983). Opis: Z medsebojno zaklenjenimi zaščitnimi pokrovi in 2 valjastima podporama.

Stanje: rabljeno, Leto izdelave: 2011, Workpiece diameter 320 mm Thread length 570 mm Thread pitch 315 mm Total power requirement 17 kW Machine weight approx. 12 t Space requirements approx. m Kljdst Hxbdjpfx Abxsu O F F E R We can offer you, subject to prior sale and errors, ex stock as follows: M I K R O M A T Universal Thread and Worm Grinding Machine Model GSU 320/1 PC Year 2011 Reconditioned # 2319.01.27 _____ Max. / Min. grinding diameter 3 – 320 mm Max. grinding length (Grinding wheel width 50 / 8 mm) 520 / 570 mm Centre distance 1,000 mm Max. workpiece weight 160 kg Workpiece spindle bore 40 mm Lead range min./max. 0.25 - 315 mm Max. lead angle + / - 40° Max. profile size 20 module Automatic radial dividing device 2/3/4/5/6/8/10/12/ 15/20/24/30/40/60 Relief grinding stroke 0 - 6 mm Plunge grinding depth 0 - 6 mm Workpiece rotational speed 0.125 - 100 rpm Rapid return 2 m/min Grinding wheel Ø x width x bore 500 x 60 x 203 mm Max. grinding wheel speed 1,595 rpm For dressing/centring 12 - 32 rpm Spindle drive approx. 6.5 kW Total drive 17 kW - 380 V - 50 Hz Weight 9,500 / 12,000 kg Accessories / Special Equipment • The machine was purchased in 2011 as a factory-reconditioned and electronically upgraded (new) machine directly from the manufacturer MIKROMAT! • Universal machine for automatic grinding of single and multi-start worms as well as threads with straight and curved flanks using single- or multi-profile grinding wheels. • The following grinding operations can be performed via simple cyclic operator guidance in the SCHLEICHER PLC control system PROMODUL U: longitudinal grinding, relief grinding, plunge grinding, groove grinding, taper grinding. In these operations, infeed and compensation occur automatically. For relief grinding and taper grinding, cams are additionally needed; division is done via change gears! • Grinding wheel hand dressing device for profiling single-profile wheels, left and right flank • Non-driven steel pressure roller burnishing device for mounting above the grinding wheel • Open rest for mounting on the grinding table, and closed 3-point rest • Workpiece carrier device in the workpiece spindle with various centres, various workpiece arbors • Hand division device for peripheral division for mounting on the workpiece spindle • Large number of change gears, additional accessories and spare parts, operating manuals. • Elaborate KNOLL coolant band filter system HL650/1500 with HYFRA cooling unit Condition: very good - demonstration ready – Delivery: immediately ex stock - as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. We always stock thread grinding machines – please let us know your requirements!

Stanje: rabljeno, Leto izdelave: 1969, Maximum wheel diameter: 265 mm Wheel width: 45 mm Module - max.: 4 Module - min.: 0.3 Workpiece diameter - max.: 300 mm Stroke length max.: 0–50 mm Stroke position adjustment: 25 mm Distance between working spindle and clamping surface max.: 170/245 mm Internal spindle taper: MK 4 Table size: 180 mm Table bore: 95/75 mm Strokes per minute: 450 – 840 Total power requirement: 10 kW Machine weight approx.: 5,200 kg Space requirements approx.: [not specified] Maximum external gear diameter (approx.): 265 mm Maximum workpiece diameter for internal gear cutting: 300 mm Maximum wheel width: 45 mm Module range: 0.3 – 4 Stroke length: 0 – 50 mm Stroke position adjustment: 25 mm Distance from table to spindle min./max.: 170/245 mm Internal spindle mount (external 90/50 mm, internal): MK 4 Table size: 180 mm Table bore: 95/75 mm Transverse table travel (approx.): 175 mm Kledpfx Abjt Hwrusxou Steplessly adjustable stroke rate: 450 – 840 strokes/min Feed range: 0.09 – 0.6 mm/stroke Rotary feed: 2,722 – 681 strokes/cutter revolution Main drive: 10 kW, 380 V, 50 Hz Weight: 5,200 kg Accessories / Special equipment * Selector switch for various work programmes and manual control * Multiple-cutting device (roughing/finishing/burning out) * Hydraulic external workpiece clamping device mounted on the table (for internal gear cutting; similar to a collet chuck) * Separate control cabinet and separate hydraulic unit * Hydrostatic linear guide with separate oil cooler * Lateral table shift for optimal ram clearance * Stepless stroke rate adjustment via GS motor * Integrated coolant system * Pre-settable pulse counter for precise table shut-off after each cut, with digital display * Various change gears

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter – max. 400 mm Number of teeth – max. 150 Module – max. 5 Total power requirement: 16 kW Machine weight approx. 10 t PRÄWEMA CNC Gear Edge Milling Machine using Continuous Hobbing Process For chamfering external and internal gears on sliding sleeves, synchronizer rings, clutch hubs, starter pinions, spur gears, etc. Type SynchroForm W 2 - 1 Year of manufacture: 1991 Machine no. 05610 Workpiece diameter min./max.: 30 – 400 mm Number of teeth: 6 – 150 Maximum module: 5 Tool holder / shank Ø: SK 30 / 20 mm Tool speed / spindle power max. continuous: 4,000 rpm or 1.8 kW Feed rates transverse & longitudinal: 0.001–12 m/min Max. workpiece rotation speed (1.5 kW) - C axis: 2,000 rpm Total drive: approx. 16 kW – 380 V – 50 Hz Weight: approx. 10,000 kg Accessories / Special Equipment: Klsdpfx Abet Hwylexsu • BWO (HECKLER & KOCH) CNC control Type 785 H for up to 7 axes with screen input and all necessary monitoring and fault diagnosis systems for fully automatic operation • Two milling spindle units (left and right), adjustable in all necessary angular positions, CNC-controlled: Z and W axes = tool cross slide / X and U axes = tool longitudinal slide, L and O axis = milling spindle, C axis = workpiece spindle rotation. Manually controlled: Tool slide rotary table (B and E axis), tool slide vertical adjustment (V and Y axis), tool head tilt (A and D axis), each with ROD for digital position indication in the control. • Hydraulically actuated workpiece clamping device in conjunction with loading automation via workpiece feeder/conveyor belt and swing loader, as well as air system monitoring for the workpiece. • Coolant unit with chip conveyor, soundproof enclosure, central lubrication, built-in hydraulic system, pneumatically operated safety doors, deburring device, etc. The machine operates on the hobbing principle with electronically synchronized tool and workpiece axes for machining both symmetrical and asymmetrical straight chamfer shapes. Characterized by high productivity and precision. Condition: good to very good – soon ready for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further machines for processing transmission components are always in stock. Please inquire about your requirements with us.

Stanje: rabljeno, Leto izdelave: 1994, Turning diameter 1250 mm Swing diameter 1160 mm Turning height 800 mm Faceplate diameter 1000 mm Total power requirement 97 kW Machine weight approx. 25,000 kg Space requirement approx. m PITTLER Vertical CNC turning and milling center with tool changer and pallet changer Ksdpfst Hwy Sjx Abxelu Model PV 1250 / 1-1 Year of manufacture 1994 Max. turning diameter 1,000 mm Max. swing diameter 1,160 mm Turning length approx. 800 mm X-axis (horizontal) 1,300 mm Y-axis (vertical) 800 mm Feed rate / rapid traverse 16,000 mm/min Main spindle speed 10 - 1,000 rpm Main spindle speed via separate C-axis 0.1 - 16 rpm C-axis positioning accuracy 360,000° +/- 5'' Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speeds 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Spindle drive 63 kW Connected load approx. 97 kVA - 400 V - 50 Hz Total weight approx. 25,000 kg Accessories / Special equipment • CNC 3-axis control NUM 760 TX with graphic, menu-guided dialog programming and all standard options, cycles, and subprograms, with tool compensation, thread cutting cycle, constant cutting speed programming, etc. • 2-axis CNC tool slide (1,300x800 mm) with powered toolholder ISO 50 / 22kW • Tool changer with 16 tool pockets (max. length 450 mm, max. 40 kg) • Pallet changing system (pallet 630 x 630 mm) with a setup station with indexing and pallet drive and 2 separate pallet stations • 3 pallets 630 x 630 mm, 3-jaw chuck Ø 650 mm, faceplate Ø 900 mm • Chip conveyor, band filter coolant system, full enclosure (including safety fence for pallet change area), separate control cabinet, operating manuals • Approx. 20 tool holders and various additional accessories Powerful, universal turning and milling center for complete machining (turning, drilling, milling, and threading) with high speeds and high metal removal rates! Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice. We look forward to receiving your order. Additionally, we have a large selection of modern used lathes under power in stock. Please inquire!

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter - max. 0 mm Number of teeth - max. 0 Module - max. Module - min. Total power requirement kW Kedpfx Abjt Hwv Hoxjlu Machine weight approx. t Space requirement approx. m CNC-controlled synchronizer ring milling machine ideal for synchronizer rings, BWO control 785 H

Leto izdelave: 1995, stanje: rabljeno, Diameter 0 mm Workpiece length 1000 mm Klsdpfx Abjt Hwu Nsxsu Workpiece width 875 mm CNC deburring cell, with 2 pallets / 10 WW / 510 - 5 axes CNC - SIEMENS 510 controlled flexible brushing and deburring center

Stanje: rabljeno, Leto izdelave: 1978, Spindle diameter: 105 mm X-travel: 1250 mm Y-travel: 1000 mm Z-travel: 600 mm Table length: 1100 mm Table width: 900 mm Spindle taper: ISO 50 / Morse taper Total power requirement: kW Machine weight approx.: t Kedpfx Abot Hwtxsxolu CNC table-type boring mill Year of manufacture: 1978 Overhauled: 2002 Control: BOSCH CC 300

Stanje: rabljeno, Leto izdelave: 1965, Honing diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Total power requirement: 6 kW Machine weight: approx. 2.6 t Max. honing diameter: 10–100 mm Max. honing depth: approx. 250 mm Max. spindle stroke: 260 mm Throat depth: 300 mm Kledpfxst Hwups Abxeu Installation height: 1,000 mm Table size: 350 x 500 mm Table height above floor: 500 mm Spindle speeds, steplessly adjustable: approx. 85–300 rpm, 170–600 rpm Stroke speed, steplessly hydraulically adjustable: 0–23 m/min Spindle drive: 2 kW Total drive: approx. 6 kW – 380 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special Equipment: - Mounted 2-station swivelling table for accepting 2 workpieces, with mechanical workpiece clamping via hand lever - Hydraulic feed of the tool - Shut-off via timer control, presumably with air measuring device - Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock, as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further honing machines constantly in stock – please contact us for more information.

Stanje: rabljeno, lastna masa: 4.060 kg, največja dovoljena obremenitev: 6.440 kg, skupna masa: 10.500 kg, konfiguracija osi: 1 os, prva registracija: 01/2018, dolžina tovornega prostora: 7.450 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 3.100 mm, prostornina tovornega prostora: 57 m³, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5, velikost zadnje pnevmatike: 235/75R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, -- Pridržujemo si pravico do tiskarskih napak, napak in sprememb, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Klodozdz Hwopfx Abxou

Stanje: rabljeno, prevoženi kilometri: 67.000 km, moč: 62 kW (84,30 KM), prva registracija: 06/2015, vrsta goriva: dizel, skupna masa: 2.800 kg, barva: rumena, vrsta prenosa: mehanski, emisijski razred: Euro 5, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, Net sale price: €8,350 EURO 5 2 x sliding doors 1st hand / 1 owner Please no emails – due to time constraints, emails cannot be processed. Thank you for your understanding! ---- Business hours and further information: Viewing & purchase possible without appointment: MON – THU: 9:00 a.m. to 4:00 p.m. FRI: 9:00 a.m. – 1:00 p.m. SAT: 9:00 a.m. – 12:00 noon Address: Tabakried 11 84076 Pfeffenhausen Please no emails – due to time constraints, emails cannot be processed. Thank you for your understanding! For inquiries: Christian Hirsch Please try to call multiple times, as we are often in customer meetings. ---- 3 seats registered in documentation / retrofit possible Special features: - Cab flooring: Rubber - Electrical package 1 - Rear hatch with glazing - Heated rear window with wiper - High bulkhead with fixed window between load compartment and cab - Multifunction display / onboard computer - Instrument cluster with 2 gauges - Rear Park Distance Control - Smoker package - Spare wheel in regular tires - Left side sliding door (load/passenger compartment) - Front and rear mud flaps - Upholstery: Durable seat covers - Driver’s seat with lumbar support - Half-height hard fibre lining in load/passenger compartment Additional equipment: - Driver & passenger airbags - Left side exterior mirror: aspherical - Right side exterior mirror: convex - Assistance system: Braking assistant (HBA) - No windows in load/passenger compartment - No child safety locks in load/passenger compartment - Body type/configuration: Panel van - Variant: Standard roof - Headlamp leveling - Truck registration - Engine: 2.0 L – 62 kW TDI - Pollen filter - Wheelbase: 3,000 mm - Low-emission according to Euro 5 emissions standard - H4 headlights - Right side sliding door (load/passenger compartment) - Adjustable driver's seat, no passenger seat - 1st row of seats in load/passenger compartment omitted - Heat insulating glazing - Permissible gross weight: 2.80 t More vehicles in stock: Kledpfxjvh S Sij Abxeu !!! Wide selection !!! !!! Constant rotation of Volkswagen T5 Transporters !!! VAT can be shown separately ---- Further T5 Transporters in stock Price depends on: - Mileage - First registration date - Visual condition - Technical condition - Due TÜV – new TÜV / main inspection - Due service - New service - 1-seater - 2-seater - 3-seater ---- VAT can be shown separately For inquiries: Christian Hirsch !!! Emails will not be answered !!! For inquiries, Christian Hirsch or our friendly staff will be happy to help. Please try calling multiple times as we are often with customers. Special features: Cab flooring: Rubber, Electrical package 1, Rear hatch with glazing, Heated rear window with wiper, High bulkhead with fixed window between load compartment and cab, Multifunction display/onboard computer, Instrument cluster with 2 gauges, Rear Park Distance Control, Smoker package, Spare wheel in regular tires, Left side sliding door (load/passenger compartment), Front and rear mud flaps, Upholstery: Durable seat covers, Driver’s seat with lumbar support, Half-height hard fibre lining in load/passenger compartment Additional equipment: Driver and front passenger airbags

Stanje: rabljeno, prevoženi kilometri: 52.000 km, moč: 88 kW (119,65 KM), prva registracija: 09/2019, vrsta goriva: dizel, skupna masa: 2.800 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, Leto izdelave: 2019, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, DDV je izkazan: Neto: 12.990 € Renault Trafic z dvema drsnima vratoma Prva registracija: 09/2019 Kilometri: 52.000 Zadnji servis pri 47.000 km Tehnični pregled: 06/2028 Dodatna oprema - glejte spodaj. ---- Odpiralni čas in dodatne informacije: Ogled brez predhodne najave možen: PON - ČET: 9.00 do 16.00 PET: 9.00 - 13.00 SOB: 9.00 - 12.00 Naslov: Tabakried 11 84076 Pfeffenhausen Nemčija Ob vprašanjih: Christian Hirsch Prosimo, poizkusite večkrat, ker smo pogosto zasedeni s strankami. Oprema: Naslon za roko * Električni pomik stekel * Električno nastavljiva zunanja ogledala * Ledvena opora * Paket za kadilce * Brezključna centralna ključavnica * Centralna ključavnica * Asistent za speljevanje v klanec * Potovalni računalnik * Servovolan * Bluetooth * Prostoročno telefoniranje * USB * Celoletne pnevmatike Avdio: Radio Klimatizacija: Klimatska naprava Varnost: ABS * Elektronska blokada motorja * ESP * Pregrada prtljažnega prostora * Kontrola oprijema Zračne blazine: Prednje zračne blazine Pomoč pri parkiranju: Zadaj Dodatna oprema: Sovoznikova zračna blazina, Avdio sistem: Radio z Bluetooth in Plug & Music, Klodpfxezdxzfs Abxsu Pomoč pri parkiranju zadaj, Zadnja vrata z oknom, Lesena tla v tovornem prostoru, Pregrada v tovornem prostoru z oknom, Kolesne okrasne pokrove, Drsna vrata na desni strani tovornega/potniškega prostora z oknom Dodatna oprema: Voznikova zračna blazina, Sistem za uravnavanje zdrsa pogonskih koles (ASR), Električno nastavljiva in ogrevana zunanja ogledala, Akumulator 85 Ah, Potovalni računalnik, Obratomer, Samodejni vklop dnevnih luči, Notranji filter: filter za cvetni prah, Karoserija/nadgradnja: furgon, Rezervoar za gorivo: 80 L, Nastavljiv volanski drog/volan, Motor 1,6 l - 88 kW dCi dizel, Meglenka zadaj, Medosna razdalja 3098 mm, Komplet za popravilo pnevmatik, Nizke emisije - skladno z normo Euro 6, Material oblazinjenja: blago, Sedeži v kabini: dvojni sedež sovoznika, Sedeži v kabini: voznikov udobni sedež 3x nastavljiv, Dnevna svetloba, Sidrišča za privez stransko v tovornem prostoru, Sidrišča v tleh tovornem prostoru, Priprava za elektriko nadgradnje, Toplotno izolacijska stekla 19 % DDV izkazan / Neto - izvoz možen. Dodatne ponudbe / odpiralni čas na / Za vprašanja sta vam na voljo Christian Hirsch ali naše prijazno osebje. Za vprašanja: Christian Hirsch Prosimo, poizkusite večkrat, ker smo pogosto zasedeni s strankami. Dodatne ponudbe na Ogled brez predhodne najave: PON - ČET: 9.00 do 16.00 PET: 9.00 - 13.00 SOB: 9.00 - 12.00 Naslov: Tabakried 11 84076 Pfeffenhausen Nemčija Oprema je določena z iskanjem po VIN številki, zato lahko pride do tehničnih napak. Podatki na spletu so nezavezujoči opisi. Ne predstavljajo zagotovljenih lastnosti. Prodajalec ne odgovarja za tipkarske in prenosne napake / spremembe / vpisne napake. Pridržujemo si pravico do napak in predčasne prodaje.

Stanje: rabljeno, prevoženi kilometri: 43.000 km, moč: 81 kW (110,13 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, prva registracija: 09/2022, barva: bela, število sedežev: 6, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, sistem za imobilizacijo, Servo, daljinsko upravljanje, električni pomik stekel, radio, prvi lastnik, servisna knjiga, zelo čisto, dostava po vsej državi 295€ + DDV, garancija in testna vožnja možna. Naknadna vgradnja vlečne kljuke 790€ + DDV Klodoy Dkk Uopfx Abxju Odpiralni čas: pon-čet 8:00-12:00 in 13:00-17:30, petek 8:00-12:30 in 14:00-17:00, sobota 9:00-11:30 Ostala vozila:

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A34902974, Oprema: Na voljo je tipska ploščica, Technical details: Voltage: 400V Phase: 3 Frequency: 50 Hz Volume flow: 12.44 m³/min Speed: 3000 rpm Klsdpfx Aswrq Icjbxju Suction pressure: 1 bar Installed motor power: 75 kW Compression medium: Air Stage pressure: 10 bar g Full load current: 174.3 A The CompAir screw compressor L75-10A is a powerful and reliable solution for generating compressed air in industrial applications. With its robust design and advanced technology, this compressor ensures a stable and efficient supply of compressed air that meets the high demands of various operations. Thanks to its compact design, the L75-10A can be easily integrated into a wide range of systems and offers durable, dependable performance.

Stanje: rabljeno, moč: 130 kW (176,75 KM), prva registracija: 09/2010, vrsta goriva: dizel, vrsta prenosa: mehanski, skupna masa: 7.400 kg, barva: rumena, Skupna dovoljena masa: 7400 kg, Šolski avtobus Mercedes-Benz 818 CDI Sora 43+2+1 sedežev, prva registracija 15.09.2010, 196.000 km, Euro 5. Vozilo pripravljeno za uporabo. Za več informacij: 336498751, 3355816093. Klodpfx Asxxnm Hjbxju

Stanje: novo, moč: 103 kW (140,04 KM), vrsta goriva: bencin, število sedežev: 17, vrsta prenosa: mehanski, barva: bela, Fiat Ducato Maxi XLH2 2.2 140 KM, 16 + 1 sedež Glavna oprema: Samodejna klimatska naprava v kabini, Radio z 10" navigacijo, Regulator in omejevalnik hitrosti, Večfunkcijski volan, Glasovno upravljanje, Preklopni sedeži, Posamezna osvetlitev in prezračevalne rešetke za potnike, Zatemnjena stekla, USB vtičnice, Zadnje vrste sedežev s hitrim izpustom, Stranska stopnica, Traction Plus + Hill Descent Control. Novo vozilo z 2-letno uradno garancijo Fiat Professional. Možnost individualnega financiranja in leasinga. TAKOJ NA VOLJO. Klsdpjynn Nnefx Abxeu

Stanje: rabljeno, prevoženi kilometri: 51.000 km, moč: 81 kW (110,13 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, prva registracija: 01/2023, emisijski razred: Euro 6, barva: bela, število sedežev: 9, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, sistem za imobilizacijo, Oprema Caravelle Servo volan, električna stekla, ogrevana zunanja ogledala, radio, dodatni grelec, prvi lastnik, servisna knjižica, zelo čisto, dostava po vsej državi 295,- EUR + DDV, vlečna kljuka z montažo 790,- EUR + DDV. Brez potrebnih popravil, preverjeno v servisu. Možna testna vožnja, dostava po vsej državi 295,- EUR + DDV. Št.: 750 Delovni čas: pon-pet 8.00-12.00 in 13.30-17.00, sobota 9.00-11.30 Kledjy Svbbspfx Abxju Ostala vozila na :

Stanje: novo, lastna masa: 6.020 kg, največja dovoljena obremenitev: 28.980 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 385/65R/22,5, Oprema: ABS, Krone construction material semi-trailer | Toolbox | Pallet box | Spare wheel holder | Krone axles with disc brakes | Unladen weight: 6,020 kg | Tyres: 385/65 R22.5 | Loading area: L: 14 m, W: 2.48 m, sideboard height: 0.73 m, front wall: 1.6 m | Subject to errors, input mistakes, and prior sale. Klsdpfxey U Nbao Abxou

Stanje: novo, lastna masa: 9.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, zračno vzmetenje z dvigovanjem in spuščanjem, tehtnice za obremenitev osi, skupna dolžina tovorne površine ca: 9.100 mm, nizko ležišče ca: 6.900 mm dolgo, nakladalna višina obtežena ca. 890 mm, 24 x pritrdilnih ušes po 10 t, 12 x žepov za stebričke v zunanjem okvirju, nakladalne rampe (ca. 3.100 x 760 mm), stopničasta letev na zunanji strani ramp in zadnjega naklona, rampe bočno nastavljive, lesena tla debeline 68 mm, skladiščna škatla z pokrovom za pritrdilne verige ali pasove, označba obrisa po predpisih, rotacijska opozorilna luč, zavorni sistem s federnim pomnilnikom, vklj. z indikatorji obremenitev osi, vozilo vroče pocinkano v potopni kopeli, doplačilo za: hidravlično pomikanje ramp = cena: 1.000 €, -- napake v tisku, pomote in spremembe pridržane, slike so simbolične --, Več podatkov na: !, More Details: ! Kledpfezddipjx Abxou

Stanje: rabljeno, prevoženi kilometri: 152.268 km, moč: 130 kW (176,75 KM), prva registracija: 05/2019, vrsta goriva: dizel, skupna masa: 3.500 kg, naslednji pregled (TÜV): 02/2027, barva: modra, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 7, prostornina tovornega prostora: 2 m³, dolžina tovornega prostora: 2.600 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 390 mm, Oprema: ABS, Št. vozila za povpraševanja strank: 153 ----Oprema: * Voznikov zračni meh * Protiraketni sistem (ABS) * Pogon: pogon na zadnja kolesa * Zunanji vzvratni ogledalo, konveksno, levo * Zunanji vzvratni ogledalo, konveksno, desno Klodpfx Abey Tf Elexsu * Akumulator 92 Ah * Elektronski program stabilnosti (ESP) * Sistem za pomoč pri speljevanju v klanec * Alternator 140 A * Menjalnik s 6 prestavami * Karoserija/nadgradnja: standardna dvojna kabina s kesonom * Rezervoar goriva: 75 L * Nastavitev višine žarometov * Longlife servis * Bočne označevalne luči * Medosna razdalja 3640 mm * Pnevmatske gume 235/65 R16C 115/113 R * SCR-sistem (tehnologija AdBlue) * Prevleka/oblazinjenje sedežev: tekstil * Sedeži v kabini: nastavljiv sopotnikov sedež * Sedeži v kabini: nastavljiv voznikov sedež * Jeklena platišča 6,5x16 * Sistem start/stop * Sprednji odbijač v sivi barvi z masko v barvi vozila * Centralno zaklepanje z daljinskim upravljanjem in notranjim gumbom * Dovoljena skupna masa 3,50 t ----Tehnični podatki: * Medosna razdalja: 3.640 mm * Dimenzije tovornega prostora: D: 2.600 mm Š: 2.050 mm V: 390 mm * Nosilnost: 950 kg * Dimenzije pnevmatik: 235/65R16C * Profil pnevmatik: ca. 60%-40% ----Nemško vozilo! * 16.800.- evrov neto + DDV * Tehnični pregled (TÜV) do 02.2027 * Pri izvozu v tretje države ali v EU se zadrži varščina, ki se po uspešni carinjenju ali dostavi kupcu povrne. * Možnost dostave po celem svetu – za individualno ponudbo nas kontaktirajte! * Z veseljem odkupimo vaše rabljeno vozilo! * Financiranje/leasing možno tudi v zahtevnejših primerih * Ta opis služi zgolj splošni identifikaciji vozila in ne pomeni nobene garancije v smislu prodajnega prava. * Navedeni podatki niso nujno popolni. Navedbe/opisi/slike so nezavezujoči in ne predstavljajo zagotovljenih lastnosti. * Ne prevzemamo odgovornosti za napake ali očitne napake. * Kupec se mora pred nakupom sam prepričati o stanju in opremljenosti vozila. * Pridržujemo si pravico do spremembe cene, napak, pomot in vmesne prodaje. * Spoštovana stranka, prosimo za razumevanje, da zaradi starosti in prevoženih kilometrov vozilo raje prodajamo poslovnim strankam ali trgovcem. Hvala za razumevanje! * Govorimo: * Grško / Miláme Elliniká Tel: +49.162.6567750 * Rusko / My govorim na Russkom Tel: +49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * E-pošta: * * Interna številka: 153

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, širina dovoda: 520 mm, leto zadnje generalne obnove: 2019, Oprema: dokumentacija / priročnik, Zlagalni stroj s 4 žepi in izhodom Kljdpfx Abozclwfjxju

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 08/2027, vrsta vhodnega toka: trifazni, številka stroja/vozila: 2026, S transportnim vozičkom za role HUB1ROLL lahko dvigujete papirne in folijske role do največje višine 180 cm. Mehanski pogon omogoča nežno, varno in zanesljivo dviganje ter spuščanje rol. Je popolna rešitev za proizvodnjo in skladišča, ki potrebujejo mobilno in učinkovito napravo za premikanje težkih in nerodnih materialov. Model: Hub-1 Izvedba iz nerjavečega jekla, premični Dvižna višina: 1800 mm dolg čas delovanja napetost za polnjenje 230V za AKU nov aparat z garancijo + servis rezervnih delov Kakovost iz strokovnega podjetja! Izkoristite več kot 35 let izkušenj! Opcije: Klsdpfx Abow S Slzsxsu vzdrževalna pogodba servisni paket storitev dostave uvedba in zagon Obiščite našo veliko razstavo!

Stanje: rabljeno, prevoženi kilometri: 70.000 km, moč: 81 kW (110,13 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, prva registracija: 02/2021, emisijski razred: Euro 6, barva: bela, število sedežev: 9, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, sistem za imobilizacijo, Servo, električni pomik stekel, ogrevana zunanja ogledala, radio, dodatni grelec, 1. lastnik, servisna knjiga, zelo čist, dostava po vsej državi 295,- EUR + DDV, vlečna kljuka vklj. montaža 790,- EUR + DDV ni zamude pri popravilih, servisno preverjeno. Testna vožnja z veseljem možna, dostava po vsej državi 295,- EUR + DDV Št.: 749 Kledpszdlz Esfx Abxsu Delovni čas: pon-pet 8.00-12.00 in 13.30-17.00, sobota od 9.00-11.30 več vozil na :

Stanje: rabljeno, prevoženi kilometri: 62.000 km, moč: 81 kW (110,13 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, prva registracija: 10/2021, naslednji pregled (TÜV): 10/2025, emisijski razred: Euro 6, barva: bela, število sedežev: 9, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, sistem za imobilizacijo, Servo, električna stekla, ogrevani zunanja ogledala, radio, dodatni grelec, vozilo iz prve roke, servisna knjižica, zelo čist, dostava po vsej državi 295 € + DDV, vlečna kljuka z montažo 790 € + DDV. Brez potrebnih popravil, pregledano v delavnici. Testna vožnja možna, dostava po vsej državi 295 € + DDV. Št.: 924. Delovni čas: pon.-pet. 8.00-12.00 in 13.30-17.00, sobota 9.00-11.30. Dodatna vozila na: Kledpjzdlz Sefx Abxsu