Proseal Fastpack F40 nakup rabljenega (194)

Stanje: rabljeno, Gear motor, electric motor, three-phase motor, geared electric motor - Speed: 180 rpm - Power: 0.75 kW - Design: B5 - Shaft diameter: Ø 25 mm - Protection class: IP 54 - Quantity: 1 motor available Gusdpfjb Sgzfjx Aa Uoc - Price: per piece - Dimensions: 470/200/H160 mm - Weight: 18.8 kg

Stanje: rabljeno, Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston - Stroke: 10 mm - Piston diameter: 40 mm - Piston rod: 16 mm - Price: per piece Gusdpfefbclnsx Aa Uec - Quantity: 4 pieces - Dimensions: 112/77/H30 mm - Weight: 0.55 kg/piece

Stanje: dober (rabljeno), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck - Manufacturer: Forkardt, wedge bar chuck type F 400 without clamping jaws - Chuck size: Ø 400 mm - Bolt circle: mm - Through hole: 102 mm - Overall dimensions: Ø 400 x 125 mm Guodpfx Aswucrrsa Uec - Weight: 90 kg

Stanje: dober (rabljeno), Gear motor, electric motor, geared electric motor - Speed: 20 rpm - Power: 0.25 kW - Shaft diameter: Ø 25 mm - Design: B5 flange, right-angle - Protection class: IP 54 Gsdpfx Asc R R A Eoa Ueuc - Brake - Quantity: 2 motors available - Price: per unit - Dimensions: 460/270/H190 mm - Weight: 24.3 kg

Stanje: rabljeno, Identification system -Type: BIS F-403 Gujdpfx Asdkparja Usc -Voltage: 24 V DC -Dimensions: 130/175/H45 mm -Weight: 0.55 kg

Stanje: rabljeno, Gear motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Eurodrive, electric motor with brake / without gearbox -Type: RF40DT80K4B -Speed: 1400/165 rpm -Power: 0.55 kW -Design: B5 Godpfx Aajibbqyj Ujuc -Shaft: Ø 12 x 20 mm -Protection class: IP 44 -Brake: 10 Nm -Dimensions: 350/145/H205 mm -Weight: 13 kg

Stanje: dober (rabljeno), Geared motor, electric motor, three-phase motor, electro-geared motor Gjdpfx Aajdwlqls Ueuc - Feed motor - Speed: 304 rpm - Power: 0.75 kW - Design: B14 - Protection class: IP 44 - Dimensions: 860/145/H270 mm - Weight: 42 kg

Stanje: rabljeno, Feed technology, feeding device, storage hopper with automatic feeding, spiral conveyor -Feeding unit without: storage hopper -Connection: 230 Volt -Dimensions: 310/310/H260 mm Gujdpfx Aodl E Imja Uoc -Weight: 31 kg

Stanje: dober (rabljeno), Gear motor, electric motor, three-phase motor, geared electric motor - Speed: 178 rpm - Power: 0.75 kW - Design: B5 - Shaft diameter: Ø mm Gujdpjb R Iukjfx Aa Usc - Protection class: IP 54 - Dimensions: 480/150/H200 mm - Weight: 30 kg

Stanje: dober (rabljeno), Pneumatic cylinder, air cylinder, pneumatic piston, air piston, rotary actuator, positioning actuator, actuators, geared motor, rotary valve, pneumatic cylinder actuators - Stroke: 83 mm - Piston diameter: mm - Piston rod: 30 mm (connection thread) - Total length: mm Guedpfscxq Aqjx Aa Usc - Total length extended: mm - Dimensions: 530/380/H380 mm - Weight: 26 kg

Leto izdelave: 2005, stanje: dober (rabljeno), Three-spindle screw spindle pump, centrifugal pump, high-pressure pump, centrifugal pump, lubricating oil/oil pump, triple screw pump - Manufacturer: Allweiler, screw pump type SPF40R54U8.3-W20 with hose package - Flow rate: 3.4 l/min Gujdpspid D Ijfx Aa Ujc - Pressure: 3 bar - Motor: 0.7 kW / 1800 rpm - Hose package: length 1x 60 m / 1x 6 m - Dimensions: 1230/900/H960 mm - Weight: 160 kg

Stanje: dober (rabljeno), Electric motor, three-phase motor - Power output: 0.75 kW - Speed: 1380 rpm Guodpfx Ascxup Sja Ujc - Shaft diameter: 19 mm - Design type: B5 - Degree of protection: IP 44 - Dimensions: 260/230/H200 mm - Weight: 10.6 kg

Stanje: dober (rabljeno), Pneumatic cylinder, air cylinder, pneumatic piston, air piston Godpfxob A S D De Aa Ueuc -Type: DZF-40-125-A-P-A-S2 -Air inlet and outlet: adjustable -Weight: 1.3 kg

Leto izdelave: 2020, stanje: novo, Title Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate Filter Press – Year 2020 – NEW / Unused Short Description For sale are unused, originally packaged plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in factory-new condition, have never been operated, and remain in their original packaging from the factory. Manufacturer Strassburger Filter GmbH + Co. KG (Germany) Model / Type SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of manufacture 2020 Serial number including 032003303920 (additional serial numbers available) CE marking Yes Condition New / unused Originally packaged Never installed, never operated Stock item Quantity available 4 identical machines available New price New price €94,000 per unit (Total new value for 4 machines: €376,000) Design / Material Completely stainless steel Plate and frame filter press Gasketed plates Pharma/Biotech version Gjdjx Ihufopfx Aa Usuc Hydraulic closure incl. hydraulic unit CE compliant Technical Data Plate size: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Frame weight: approx. 480 kg Plate package weight: approx. 120 kg Plate Package 14 filter plates 13 filter frames 1 end frame 1 partition plate 28 filter sheets per setup Hydraulics & Drive Hydraulic closure Hydraulic unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Valve voltage: 24 V DC Compressed air requirement: 3.0 bar Connections Product inlet and outlet DN25 Vent/Drain DN15 Connections according to DIN 11864-2 Drip tray included Areas of Application Pharmaceutical production Biotechnology Chemical industry Pre-filtration Precipitation and clarification processes Location Germany Viewing available by appointment Immediately available

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 4.650 h, največja debelina roba: 3 mm, višina izdelka (maks.): 45 mm, višina izdelka (min.): 10 mm, dolžina izdelka (min.): 140 mm, širina izdelka (min.): 70 mm, TECHNICAL DETAILS Machine Frame: Tempora 45.03L, made of thick-walled electro-welded steel construction Control System x-motion plus control: Swiveling 15" smartouch panel Unlimited storage space for user-defined edging programs Fine adjustment of travel path parameters Optimization of edge overhang during pre-trimming front and rear Feed Chain Feed speed: 9 m/min Drive motor: 1.5 kW (S6) Precision running and guide surfaces Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm Gedpewwq Dzsfx Aa Uouc Segmented, rubber-coated support pads with quick-change system Rotary Table Edge Magazine Roll edge material diameter: 740 mm Roll edge material thickness: 0.4 – 3 mm Extension Frame Workpiece support: extendable up to 450 mm with roller conveyor for ergonomic handling of larger workpieces Upper Pressure Beam Workpiece height: 8–45 mm Pressure beam made of welded, torsion-resistant steel construction Upper pressure rollers arranged in double-row staggered layout Edge Feeding Powered, rubber-coated feed roller Edge thickness: 0.4 – 3.0 mm Workpiece Feed Extendable workpiece support: up to 450 mm Jointing unit material removal: 0 – 2 mm (on feed fence), digital counter Jointing Unit Power: 2.2 kW, diamond cutter Z2, speed: 12,000 rpm 2 x 1.1 kW (1.5 hp) Material removal: max. 2 mm Workpiece height: max. 45 mm Jointing cutter with diamond blades Z2+2, D-80 x 49 mm (for angular and tear-free workpiece edges) Glue Unit Glue unit: Teflon-coated, for 1.5 kg EVA or PUR granulate Heat-up time: 10 minutes Linear meter performance: 375 lm (at 19 mm panel) Fine-adjustable glue roller Pressure Unit 1 aluminum roller at 90° angle 1 rubber-coated pressure roller Guillotine Shears Roll edge material thickness: 0.4 – 3 mm For pre-trimming, oscillating End Trimming Saw Unit 0.15 kW, speed 12,000 rpm with 90° round shaft guide End trimming saw with 45° travel path, 0.35 kW, 12,000 rpm Selectable between 0° and 10° cut angle Milling Unit Multifunctional milling unit: x-motion plus, 2 high-frequency motors, each 0.75 kW, 12,000 rpm Replaceable cutters: 4 pieces each Precision: 2-axis adjustment enables fine tuning in the 1/100 mm range Motorized Corner Rounding Unit Corner processing unit for post-formed and softforming profiles Workpiece height: 10 – 45 mm Edge thickness: 0.4 – 3 mm TCT cutter with 2 blades Radius: max. 6 mm Workpiece length: min. 270 mm (at 19 mm height) Radius Scraper Unit Processing of 2 mm plastic edges Scraper adjustment via digital counter and m-motion positioning system Scanning of workpiece contours Polishing Unit Upper and lower polishing unit Spray device for cleaning agents Flat Scraper Upper and lower flat scraper for residual adhesive removal. Scanning of workpiece contours Multifunctional Milling Unit for Cup Hinge Boring For processing workpieces with cup hinge bores, back panel grooves and acute-angled workpieces

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 82 h, nosilnost: 4.000 kg, dvižna višina: 3.370 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 2.320 mm, dolžina vilic: 1.200 mm, vrsta pogona: Elektro, Electric 4-wheel forklift Mast type: Standard Gedpsuhxk Hefx Aa Ujuc Technical condition: very good Battery year of manufacture: 2012 Description: Toyota FBMF40 M0442 Year of manufacture: 2011 Operating hours: 82 The machine is in visually very good and technically very good condition. Charger available on request. Subject to errors and prior sale. If you have not found your desired forklift, please contact us. We have a wide range of further units available on site. WITHOUT ATTACHMENT 3rd valve, 4th valve,

Stanje: novo, lastna masa: 750 kg, največja dovoljena obremenitev: 2.750 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 340 mm, prostornina tovornega prostora: 1,8 m³, barva: srebrn, gradbena višina: 1.670 mm, delovna širina: 2.100 mm, Reverse-automatic, hot-dip galvanized, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from initial registration - Availability: Immediately available!! - TÜV: 2 years - Floor: Wooden floor - Permissible total weight: 3,500 kg - Empty weight: 750 kg - Payload: 2,750 kg - Internal dimensions: 400 x 150 x 34 cm (L x W x H) - Overall external dimensions: 582 x 210 x 167 cm (L x W x H) - Loading edge height: 35 cm - Tyres: 195/50R13C steel rims - Brake: Yes - Jockey wheel: Yes, automatic - incl. vehicle documents (registration certificate) Equipment: - Brake: Yes - Number of axles: 2 - Floor: Wooden floor - Side panels: Steel side panels - Side panel height: 34 cm - Locks: Eccentric locks - Number of pallet spaces: 5 - Multi-purpose vehicle: No - Tilting / lowering function: Without - Hydraulic pump: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanizing: Hot-dip galvanized - Drawbar: Continuous V-drawbar, square tube - Mudguards: Steel mudguards - Spare wheel: Optional, retrofittable - Bucket rest: Yes - Superstructures / extensions: No - Ramp shaft: No - Ramps/loading flap: Yes - Ramp type: Full-width tailgate - Ramp load capacity: - - Approach angle: approx. 12° - Supports: integrated in tailgate - Lashing eyes: 10 - Rear lighting: Incandescent, lamps recessed in rear frame Gedpfxeu Skxyj Aa Uouc - Side lighting: - - Lighting plug: 13-pin - Vehicle documents: COC papers Description: - Continuous, walkable steel mudguards - Very robust welded steel frame - Waterproof bonded 18 mm phenolic plywood floor - Loading surface height only approx. 35 cm - Maintenance-free rubber suspension axles from KNOTT - KNOTT overrun device and parking brake - Reverse-automatic - Very low chassis for minimal approach angle - V-drawbar with support for excavator bucket - Excavator bucket rest with lashing eyes - Sturdy steel side panels approx. 34 cm high - Galvanized chassis - Torsionally stiff longitudinal chassis frame for safe driving characteristics - Heavy-duty loading ramp, approx. 132 cm long, with gas strut assist - Sturdy rear support integrated into the loading ramp (automatic support when ramp is open) - 10x side lashing eyes, with ring eyelets - Rear lighting recessed in the rear frame - Front marker lights - Automatic jockey wheel with center mount - 13-pin plug - Reversing light - Integrated rear fog light New vehicle with warranty and TÜV. We are happy to offer you suitable financing options! Descriptions and images are copyright protected!! Over 800 trailers immediately available! We have been specialist dealers & offer repairs for over 30 years for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. Service center & workshop. Nationwide delivery in Germany available for an extra charge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions, and prior sale excepted.

Stanje: dober (rabljeno), Double-end profiler, edge processing machine, scoring motor, machining motor, spindle motor, milling motor - Motor: 0.23 kW, 18,000 rpm at 300 Hz - Shaft mounting: Ø 15 mm, length 25 mm - Quantity: 5 motors available Gusdpfx Aaeb A Nxys Uoc - Price: per piece - Dimensions: 200/70/H90 mm - Weight: 2 kg

Stanje: dober (rabljeno), Contactor, semiconductor relay, contactor - Max. 4 kW 400 V/380 V - Price: per unit - Quantity: 3 units available Gedpfx Aob A N Agoa Usuc - Weight: 0.5 kg

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 11.000 km, moč: 310 kW (421,48 KM), prva registracija: 12/2023, vrsta goriva: dizel, konfiguracija osi: 8x4, gorivo: dizel, zavore: zaviranje z motorjem, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: parabolično listje (vzmet), dolžina tovornega prostora: 6.300 mm, Leto izdelave: 2023, obratovalne ure: 750 h, Oprema: žerjav, = Dodatne možnosti in oprema = - Ojačevalnik zavor - Senčnik - Ksenonska osvetlitev - Kardanska gred (PTO) Gsdpfoyll S Uex Aa Ujuc = Dodatne informacije = Konfiguracija osi Vzmetenje: parabolično vzmetenje Prednja os 1: krmiljena Prednja os 2: krmiljena Zadnja os 1: redukcija: zunanje planetne osi Zadnja os 2: redukcija: zunanje planetne osi Teže Lastna teža: 21.000 kg Nosilnost: 10.925 kg Dovoljena skupna masa: 32.000 kg Funkcionalno Znamka nadgradnje: HMF 4020 K6 + JIB FJ 600-K4 CE oznaka: da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 359.565 km, prva registracija: 03/2017, vrsta goriva: dizel, konfiguracija osi: 8x4, gorivo: dizel, barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2017, Oprema: AdBlue, žerjav, = Additional Options and Accessories = - PTO = Further Information = Axle Configuration Front axle: Steering Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; Steering Functional Mast: Telescopic (8 sections) Mast length: 25.1 m Lifting capacity: 7,180 kg Lifting height: 2,510 cm Crane: HMF 4020-K8, mounted behind the cab Body make: HMF 4020-K8 CE marking: Yes Condition Technical condition: Very good Optical condition: Very good Financial Information Price: On request MAN TGX 33.560 8x4 Tridem + HMF 4020-K8 Crane EURO 6 L PACKAGE 560 HP DRIVE: 8x4 Tridem configuration, last axle liftable and steerable AIR SUSPENSION WHEELBASE: 360 cm AUTOMATIC TRANSMISSION WITH ENGINE BRAKE TGX SLEEPER CAB WITH AIR CONDITIONING, NAVIGATION, LEATHER, REFRIGERATOR OPEN LOADING PLATFORM WITH REMOVABLE ALUMINUM SIDE WALLS PLATFORM LENGTH: 650 cm LASHING EYES / RONGPOTTEN MULTIPLE TOOL BOXES HMF 4020-K8 CRANE 8X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL OIL COOLER FOR CRANE HYDRAULICS WORKING HEIGHT: 25.1 meters MAX. LIFTING CAPACITY: 7,180 kg MAX. LIFTING CAPACITY AT 2,130 cm: 1,010 kg 4X OUTRIGGERS 5th AND 6th FUNCTION FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPAÑOL Gusdpfx Aaeuxwpre Ujc WE SPEAK ENGLISH

Stanje: rabljeno, Leto izdelave: 1997, potovalna razdalja osi X: 3.708 mm, pomik osi Y: 1.208 mm, pomik po osi Z: 1.002 mm, dolžina podajanja os X: 5.000 mm, dolžina pomika po osi Y: 5.000 mm, dolžina podajanja os Z: 5.000 mm, hitro pomikanje X-os: 15 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 15 m/min, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 35 obr/min, CNC Bed Milling Machine - Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical Data: X-travel: 3708 mm Y-travel: 1208 mm Z-travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35 - 3000 rpm Godpfx Aajwtpfpe Ujuc Spindle motor: 22 kW Feed rate: 6 - 5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/- 120° (stepless) Milling head in the rear axis automatically swivelling / swing 90° Coolant system Machine can be inspected under power. Availability: immediately Sale from location Westerkappeln Dismantling and loading can be arranged upon request.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 1.400 km, moč: 346 kW (470,43 KM), prva registracija: 07/2024, vrsta goriva: dizel, konfiguracija osi: 8x4, gorivo: dizel, zavore: zaviranje z motorjem, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2024, Oprema: ABS, centralno zaklepanje, električno nastavljivo ogledalo, klimatska naprava, meglenke, spojka prikolice, tempomat, žerjav, = Additional Options and Accessories = - Power brake booster - High beam - Low noise - Speed limiter - Radio/cassette player - Sun visor - Stability control - Toolbox - Power take-off (PTO) Gsdpfjyiungox Aa Ueuc - Towing hitch = Further Information = Axle configuration Front axle 1: Steered Front axle 2: Steered Weights Unladen weight: 20,680 kg Functional Mast: Telescopic (10 sections) Lifting capacity: 7,560 kg Lifting height: 3,100 cm Crane: HMF 4020 K6+FJ 600-K4, mounted behind the cab Superstructure brand: HMF 4020 K-6 + FJ 600 K-4 CE certification: yes Condition Technical condition: very good Visual condition: very good MAN TGX 35.470 HMF 4020-K6 + FJ 600K 4 JIB + WINCH EURO 6 L PACKAGE 470 HP DRIVE 8X4 LEAF-SUSPENDED WHEELBASE 435 CM AUTOMATIC TRANSMISSION WITH ENGINE BRAKE TGS SLEEPER CAB WITH AIR CONDITIONING, NAVIGATION, LEATHER OPEN LOAD PLATFORM WITH REMOVABLE ALUMINIUM SIDE PANELS LOAD PLATFORM LENGTH 630 CM LASHING EYES, STAKE POCKETS HMF 4020-K6 CRANE + FJ 600K4 JIB 10X HYDRAULICALLY EXTENDABLE RADIO REMOTE CONTROL OIL COOLER FOR CRANE HYDRAULICS WORKING HEIGHT 31 METRES MAX. LIFTING CAPACITY 7,560 KG MAX. LIFTING CAPACITY AT 27 METRES 430 KG 4X OUTRIGGERS 5th AND 6th FUNCTION FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Stanje: novo, Leto izdelave: 2025, Flow wrapper for high-speed packaging of small products in longitudinally sealed flow packs. The flow pack packaging machine is suitable for packing single or multiple, dry, uniform, or irregularly shaped products. A special feeding system is installed upstream of the flow wrapper. Sorting and feeding of products in-line to the carriers (flow wrapper infeed table) is handled by the six servo-driven side conveyor belts. This eliminates the need for manual single product loading, offering a significant production advantage and contributing to the overall efficiency of the flow wrapper. AMTEC’s flow pack packaging machine features rotary knives perfectly matched in diameter to the bag length, resulting in optimized processing speed. – Specifications: Suitable product dimensions: L (depending on bag length) x W (15-60) x H (5-30) mm; Bag dimensions: L (70-200) x W (15-60) x H (5-30) mm; Number of rotary knives: 2; Max. machine cycle rate (no load): 400 cycles/minute; Film types: BOPP/OPP (clear, printed, or laminated); Power supply: 380V, 9.5kW; Machine dimensions: L9734 x W1110 x H1924 mm; Weight: 3500kg. Please note that our new prices are often below typical used equipment prices. Feel free to send us an inquiry with details about your packaging requirements. Usually, 30–50 different new machines are available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from around 3 weeks. All machines are supplied with a full warranty. Gsdpfxsv Nli Dj Aa Uouc

Stanje: novo, Leto izdelave: 2025, Fully automatic tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, general care products like shower gel, hair shampoo, hair gel, toothpaste, sunscreen, etc. Suitable for pre-made tubes (closed with a cap) made from plastic, metal, or coated composite material. Fully automatic feeding and alignment of the tubes (rotation in the holder) using print marks, as well as filling and sealing the tubes. Prior to filling, the tube is air flushed to prevent contamination. 'No tube, no fill' is also a standard feature. Water cooling system, batch/date printer, and dosing unit, consisting of a pneumatic piston pump and supply tank with level sensor, are included. PLC controlled, operated via touchscreen. Optional at extra cost: heated supply tank, agitator for supply tank, additional format sets (holders) for various tube diameters, external tube feeding lift. Gjdpfxsv Nlduo Aa Uouc Specifications: max. machine speed in idle mode: 65 cycles/minute; filling range: 1-400ml; accuracy: ±0.5%; tube diameter: 10-50mm (a separate holder is required for each tube diameter); tube length: 80-230mm; number of filling heads: 1; tank capacity: 45L; product-contact parts made of 316L stainless steel; power supply: 220/380V, power consumption: 9kW; compressed air: 0.4-0.6MPa; machine dimensions: L2000xW1160xH2100mm. Please note that our new prices are frequently below common used equipment prices. Feel free to contact us with your packaging requirements. - We typically have 30-50 different new machines available for immediate delivery from stock. For custom-manufactured machines, we offer very short lead times starting from approx. 3 weeks. - All machines are available with a full warranty.