Prima Power Optimo 3D nakup rabljenega (43.076)

Stanje: rabljeno, številka stroja/vozila: 475, Podrobnejše podatke in dodatne slike vam z veseljem pošljemo na zahtevo. Ta opis ne predstavlja zavezujoče ponudbe in lahko vsebuje napake. Za vse navedene podatke ne jamčimo. Lasdezcblrspfx Abxsc

Stanje: rabljeno, Leto izdelave: 1994, Tehnični podatki: Lasdpfxjzf N Tnj Abxsc - Proizvajalec: IST - Leto izdelave: 1994 - Delovna širina: 1300 mm - S 3D ogledali - Število cevi od zgoraj: 1 kos - Cev nameščena pod kotom - Razdalja med elektrodami: 1620 mm - Primerno za sušenje robov - Primerno za živosrebrne in galijeve cevi - Moč cevi: 80 W/cm - Za montažo na obstoječi transportni sistem - Lokacija: na zalogi - Volt, Hz: 400 / 50 - Dobro ohranjeno stanje

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 9960-10-1059, technical data: - Manufacturer: Printworld - Model: 3D - PUVD - Year of manufacture: 2016 - Working width: max. 1,300 mm - UV lamp length: 2 x 1,600 mm sheet length - Number of radiators: 2 upper curing systems + 1 lower curing system - UV power control: UV lamps can be individually adjusted (30% - 100%) - Reflector: Printworld Multifocal Reflector - Conveyor belt transport width: 1,400 mm - Overall length: 4.5 m - Conveyor belt speed: 3 – 20 m/min - Substrate pass-through height: 60 mm max. (optional higher) - Conveyor belt design: PTFE fiberglass conveyor belt, antistatic coated - Conveyor speed control: Infinitely variable with digital control and monitoring - Conveyor drive: Stepper motor with variable belt speed and digital control & monitoring - Energy saving: Automatic standby mode with power reduction of approx. 10% - Operation/control: Schneider Modicon M258 Logic Controller Processor with Magelis color touchscreen - Infeed height: 850 – 900 mm - Outfeed height: 850 – 900 mm - Electrical connection: 400V~, 50 Hz, 3-phase +N +PE - Current: 135A - Location: ex stock Laedpfezf N Rgox Abxjc

Stanje: rabljeno, Leto izdelave: 2013, Venjakob Perfect Paint Finishing Line: - Manufacturer: Venjakob - Year of Manufacture: 2013 - Working width: 1,300 mm Ljdpfezf N Niex Abxoac - Max. workpiece length: 6,500 mm - U-shaped layout with corner transfer Consisting of: 1. Infeed conveyor, length 3,050 mm 2. Open space for sanding machine (optional) 3. Automatic spray machine VEN SPRAY PERFECT, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm 5. Jet dryer VEN DRY AIR JET, length 4,160 mm 6. 180-degree corner transfer with jet dryer 7. Supply air system for corner transfer, 25,000 m³/h 8. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 9. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 10. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 11. 3D-UV Dryer, VEN DRY UV, GA + HG 12. Discharge area, belt of UV dryer 13. Supply air unit for hall, 30,000 m³/h Further information: On request

Leto izdelave: 2024, stanje: rabljeno, The control of the dedusting system is switched on and off via two sensors. Suitable for installation on an existing conveyor system Sword Brush Micro-moistening of the brush elements using an antistatic humidification nozzle by Riepe. Moistening can be precisely adjusted through this nozzle. Cleaning of the product surface via sword brush technology. Dust particles are collected by the brushes and removed by the extraction system. Lajdpfx Ajzf N Ncobxsc A rotating doctor blade and compressed air nozzles ensure continuous cleaning of the brush system. Power-Channel The Power-Channel contains 14 rotating dual power compressed air nozzles, which pneumatically remove particles or dust from the material surface and recesses. The extraction system disposes of the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the circulating brush Dust extraction: 2 x D120 mm top + 2 x D80 mm on the side Motorized height adjustment Material to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Acceptance standard: Workpiece surface dust-free Important: Adhesive residues will not be removed. Machine dimensions: Width: 2,280 mm Installation length: 500 mm

Stanje: rabljeno, Leto izdelave: 1997, številka stroja/vozila: 4406, 3D UV dryer Superfici incl. conveyor Lasdszf N Edopfx Abxjc The machine in the pictures is shown in its unrefurbished condition. - Manufacturer: Superfici - Model: TU166-30 + 2 UVM55 - Year of manufacture: 1997 - Working width: 1300 mm - Number of lamps from above: 2 pcs. - Lamps arranged at an angle - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: 80 W/cm - Adjustable in steps: 80/40 W/cm - Feed rate adjustable via handwheel ~ 2 - 7.5 m/min - Location: in stock - Voltage, Hz: 400 / 50 - Customs tariff number: 8419 3200

Stanje: rabljeno, Rabljeni modul za merjenje moči za integracijo v industrijske laserske naprave. Naprava se uporablja za nadzor moči in procesno kontrolo v laserskih aplikacijah ter ima PROFINET vmesnik za vključitev v avtomatizacijske sisteme. Proizvajalec: PRIMES Tip naprave: Modul za merjenje moči Model: PMM PROFINET Stanje: rabljeno Leto izdelave: 2017 Komunikacijski vmesnik: PROFINET PROFINET revizija: 2.3 GSDML verzija: V2.3 Identifikacija naprave: PRIMES-PMM-PN-Cu-20140815 Tipna oznaka: Cu-20140815 2 x RJ45 Ethernet priključka COM vmesnik Zunanji napajalni priklop Statusna indikacija Link Tx/Rx Navzoča nalepka o kalibracijski storitvi Izvedba za bakreni vmesnik Lokacija: Kusel Lajdpfx Abszdnixexsc Količina: na voljo 6 kosov

Leto izdelave: 2014, obratovalne ure: 59.436 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Buderus Loganova EN20 SPTE – 19 kW el. / 38 kW th. – Leto izdelave 2014 Naprodaj je soproizvodna enota (SPTE) proizvajalca Buderus, tip Loganova EN20, iz poslovne nepremičnine v Stuttgartu. Naprava se izključuje zaradi posodobitve energetskega sistema. Tehnični podatki: * Proizvajalec: Buderus * Tip: Loganova EN20 * Leto izdelave: 2014 * Električna moč: 19 kW * Toplotna moč: 38 kW * Obratovalne ure: 59.436 h * Zagonov: 6.031 * Servis: Premium vzdrževalna pogodba od prvega zagona Stanje naprave: Naprava se pravilno zaganja in obratuje. Trenutno je zaznana napaka na toplotnem izmenjevalniku. Po prvi oceni je pokvarjena črpalka za ogrevalno vodo. SPTE je trenutno izven obratovanja. Lsdpfxszd Uhhe Abxsac Lokacija in razpoložljivost: Lokacija: 70567 Stuttgart Načrtovana izključitev / demontaža: Junij–julij 2026 Opomba: Redno vzdrževana naprava z dokumentirano servisno zgodovino. Prodaja zaradi posodobitve sistema. Ogled možen po predhodnem dogovoru. Ob zanimanju vam z veseljem posredujemo dodatne informacije in fotografije.

Stanje: zelo dobro (rabljeno), Weishaupt dual-fuel burner RGL70, oil + gas, output 10,500 kW Laedpfx Aspir Unobxec

Stanje: zelo dobro (rabljeno), Elco gas burner VG4.460DP, output 460 kW. Lsdspir Nbopfx Abxsac

Stanje: dober (rabljeno), Riello oil burner 482M1, output 2370 kW, 220 kg/h Lajdopir Ryopfx Abxoc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Stratasys 3D Printer PolyJet J750 With the Stratasys J750 3D printer, you can optimize and streamline the process of producing models from various materials on a single build platform within the same print job. During the design phase, components of a model can be assigned colors. The model can then be saved as a VRML file and printed with the desired colors. Ongoing maintenance package until June 2026, including spare parts. The Stratasys J750 3D printer features a build volume of 490 mm × 390 mm × 200 mm (19.3 × 15.35 × 7.8 in). Power connection 100–120 VAC, 50–60 Hz, 13.5 A, single phase or 220–240 VAC, 50–60 Hz, 7 A, single phase Technical specifications Overall length: 1,400 mm Overall height: 1,100 mm Overall width: 1,260 mm Input electricity type: Alternating current (AC) Net weight: 430 kg Input voltage: 230 V Input current: 13 A Input frequency: 50–60 Hz Ambient temperature (min.): 18 °C Laedpfx Aeyly Aujbxsc Ambient temperature (max.): 25 °C Applications Rapid prototyping Concept modeling Medical models Production tools and jigs Color textures

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, obratovalne ure: 300 h, The price applies to the machine from the demo center, including an additional tank and a second build platform. - Build volume: 250*250*250 mm - Scanning speeds up to 12 m/s Laedpfxehvim Ej Abxoc - Layer thickness from 0.05 mm - Accuracy of +/- 0.1% over segment length - Granite return frame - Control of key operating parameters - Pump-fed refill capability - High-performance vacuum recoating system - Key components from Spectra-Physics, Advanced Optowave, SCANLAB, and Panasonic The machine features an open material platform – consumables from all manufacturers can be sourced directly and processed. Transport, commissioning, and consumables are not included in the price. The local UnionTech partner handles installation, training, and service!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 200 h, The system is located at the BIBUS Austria Demo Center and can be inspected and tested at any time. In total, the device can process 14 materials – in addition to common plastics such as ABS, PLA, TPU, and Carbon PA, it also supports high-performance polymers such as Ultem, Peek, CarbonPeek, and Helios-Peek. The Hyperspeed upgrade can be performed at any time and increases the system’s productivity in dual mode by 65%. The cost for this is €35,000, including hardware, software, and service. Four material dryers are included in the scope of delivery. Payment terms: advance payment, exclusive of transport and commissioning – these costs are location-dependent and will be invoiced based on the delivery address. Laodpfx Aboibikwexec

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 200 h, skupna dolžina: 2.128 mm, skupna širina: 1.294 mm, vhodna napetost: 400 V, trajanje garancije: 6 meseci, vhodni tok: 32 A, laserska moč: 100 W, kapaciteta rezervoarja: 32 l, volumenski pretok: 20 m³/h, Stroj za lasersko sintranje poliamida z dvema izmenljivima posodama in razpakirno postajo. Stroj si je mogoče kadar koli ogledati in preizkusiti v demo centru BIBUS-Austria. Poleg tega ima sistem hitro menjavo med vlečno rezilo in premaznim valjem – sistem je vedno na najnovejšem tehnološkem nivoju, saj so se izvajale stalne nadgradnje. Ledpfx Ajqwkypjbxoac

Stanje: rabljeno, S to ponudbo kupite rabljen zobotehniški 3D skener 'CADstar CS Neo'. Predmet prodaje: 1 x CADstar CS Neo z naslednjo opremo: - vključno s kalibracijskim telesom - vključno z držalom + Arti Base - vključno z računalnikom Stanje: Lajdpfxot H Eudj Abxec Ponudba se nanaša na rabljeno napravo, ki lahko kaže znake uporabe (manjše praske ali porumenelost). Pakiranje in pošiljanje: Napravo si lahko ogledate v času našega delovnega časa. Prosimo, predhodno se dogovorite za termin! Pomorska embalaža in svetovna dostava sta možni na zahtevo! Za dodatne informacije nas prosimo kontaktirajte osebno.

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), - RABLJENA - 4-OSNA SINHRONIZIRANA CNC UPUGALNA PREŠA OSI: Y1 - Y2 - X - R Lsdpfexn U Rqox Abxsac DOLŽINA UPUGANJA: 2100 mm TONAŽA: 60 ton GLOBINA VRATA: 410 mm RAZDALJA MED STEBROMA: 1700 mm HOD ZGORNJEGA NOSILCA: 275 mm KRMILNA ENOTA: DELEM DA58 TEŽA: 4560 kg SKUPNE DIMENZIJE: 3250 x 1960 x 2750 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 1.774 h, Funkcionalnost: popolnoma funkcionalen, delovna širina: 510 mm, trajanje garancije: 12 meseci, kapaciteta rezervoarja: 40 l, skupna višina: 1.145 mm, skupna širina: 620 mm, skupna dolžina: 1.249 mm, kapaciteta rezervoarja za vodo: 40 l, We offer for sale a manually operated floor scrubber Karcher B 40 W Bp Dose. Condition – Very good Year of manufacture: 2016 The machine is in excellent condition, both visually and technically. It has undergone a comprehensive and detailed overhaul, ensuring it is fully functional and ready for immediate use. All machines offered by us are shown in actual photographs – you are buying exactly the unit you see in the pictures. All equipment purchased from us comes with a 12-month WARRANTY. Included equipment: - New Batteries - New Disc Brushes - New Squeegee Rubbers - Charger Technical data: – Battery power supply (V): 24 – Working width (brushes) (mm): 550 – Suction width (mm): 850 – Theoretical area performance (m²/h): 3300 – Practical area performance (m²/h): 1980 – Solution/recovery tank (l): 40 / 40 Ljdpew Ifbnjfx Abxoac – Brush contact pressure (g/cm²): 140 – 160 – Brush speed (rpm): 1200 – Rated power (W): max. 1300 – Traction motor (W): 130 – Dimensions (L x W x H) (mm): 1249 x 620 x 1145

Leto izdelave: 2024, obratovalne ure: 500 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Tukaj se prodaja celovit koncept. 1. 3D kovinski tiskalnik Trueprint 1000 G06, l. 2024, 500 laserskih ur 2. Ultrazvočna sito postaja Assonic 1000, stara 1 leto 3. Moker ločevalnik Ruwac NA7-11, star 1 leto 4. F 90 omara za materiale, stara 1 leto 5. Köttermann omara za tlačne plinske jeklenke, rabljena, inštalacija v omari stara 1 leto Lajdpfx Abezdq Rfexec 6. Odsesovalni sistem za prostor in za omaro za tlačne plinske jeklenke. Dovod zraka v odsesovalnem sistemu je opremljen z grelnim elementom in lahko vpihuje predhodno ogret zrak (pozimi). Vse naprave so delujoče in to lahko potrdimo s poskusnim zagonom. Odstranitev naprav je v breme kupca.

Stanje: novo, Proizvajalec: Siemens Stanje: Novo, originalna embalaža odprta Tip: Močnostni modul Laodpfxjzcw Rqs Abxjc Serija: SIMODRIVE 611 Številka izdelka: 6SN1123-1AA00-0CA2 Družina izdelkov: SIMODRIVE 611 Izvedba: Posuvni močnostni modul Nazivna napetost enosmernega vmesnega kroga: 600 V DC Hlajenje: Notranje zračno hlajenje Način montaže: Vgradnja v krmilno omaro Področje uporabe: CNC-obdelovalni stroji in avtomatizacijske naprave Združljivost: Siemens SIMODRIVE 611 pogonski sistemi

Stanje: novo, Proizvajalec: Siemens Stanje: Novo v smislu neuporabljeno, originalna embalaža odprta Tip: Vgradni napajalnik Oznaka: SV-DC/DC Laodpozcw Ipjfx Abxjc Številka artikla: A5E00166828 Uporaba: Napajanje za Siemens PCU50 Kompatibilna platforma: SINUMERIK / PCU50 Tip procesorja PCU50: 333 MHz Izvedba: Vgradni modul Napajalna enota: DC/DC pretvornik Področje uporabe: CNC krmilniki in industrijska avtomatizacijska tehnika Način montaže: Vgradnja v krmilno omaro ali v nadzorno enoto

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cc Clamping unit: Clamping force: 250 t Tie bar spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum monitoring x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable delivery hydraulic pumps Parallel movements Proportional valve on the injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes electrically driven with servomotors: X, Y, Z, B; C axis Touch control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor at extra cost Dimensions: Ledpszc Nw Aofx Abxsac Weight: 20,100 kg Length/width/height: 6.50 x 2.20 x 2.30 m All machines offered are put into operation by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Injection Unit: Screw diameter: 50 mm Shot weight: 402.2 g Injection pressure: 1714 bar Dosage volume: 442 cm³ Clamping Unit: Clamping force: 150 t Tie bar spacing: 520 x 470 mm Platen size: 760 x 755 mm Ejector: hydraulic Lajdpfxezc Nuhj Abxjc Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total hours of operation: 36,714 Euromap 67 Robot interface Air valve x1 Hydraulic core pull x1 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine – servo motor driven by inverter – energy-saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82 x 1.42 x 2.20 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video showing the technical tests of the selected machine, or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Moulding Machine with Rotary Table Laedpezc Nubsfx Abxoc Year of Manufacture: 2015 Injection Unit: Screw diameter: 35 mm Shot weight: 175.6 g Injection pressure: 2,743 bar Dosage volume: 193 cc Clamping Unit: Clamping force: 150 t Tie bar spacing: 0x0 mm Platen size: 1,280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional Equipment: Vertical injection moulding machine with rotary table Hybrid machine: high-speed, energy efficient, and very quiet Air valves x 5 Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and corrosion resistant Rotary table diameter: 1,500 mm Rotary table driven by servo motor, controlled via frequency inverter Dimensions: Weight: 11,300 kg Length/Width/Height: 3.83x1.50x4.07 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: novo, FORD agregat za izredne razmere Lasdpfx Abey U Dr Toxsc