Rezervni električni generator

Ford FDT9200SE

Stanje: novo, Leto izdelave: 2023, gorivo: dizel, neprekinjena (navidezna) moč: 8 kVA, 2 units left, 20 units have been sold! !!!!! NEW FORD DIESEL GENERATOR FDT9200SE 8KVA !!!!! This is a quiet FORD FDT9200SE, a compact yet highly powerful HEAVY DUTY standby generator from Ford, offering switchable 230V single-phase or 400V three-phase power supply as a reliable emergency power source. This mobile generator is powered by an air-cooled, 4-stroke Hyundai diesel engine with a displacement of 498 cm³ and a maximum output of 7.9 kVA (400V). Available connections are 1x PCE5p (400V) and 1x 32A socket. To minimise disturbance, the generator is housed in a sound-insulated enclosure, ensuring that any noise is kept to a minimum for you, your family, or your staff within commercial or residential settings. The generator is also equipped with an AVR (Automatic Voltage Regulator), guaranteeing stable power supply both for essential operations and for more sensitive electronic devices such as TVs, computers, and smartphones. With a full fuel tank, the generator runs for approximately 13 hours at 50% load. In addition to the electric start function, the unit features a practical digital control panel displaying frequency, voltage, and total running time. If the oil level is too low, the generator will automatically shut down to ensure the engine is always protected. The generator requires minimal service and maintenance and is very user-friendly. Single-phase and three-phase power ATS (Automatic Transfer Switch) compatible Economical consumption, approx. 1 l/h 4 units available. Ijdpfx Anju Tk R Ajyoid

Stanje: novo, Leto izdelave: 2024, Namen uporabe: rudarstvo Lastna teža: 180 kg Ijdpfx Aoyawibonysid Nosilnost: 500 kg Skupna dovoljena masa: 680 kg

Leto izdelave: 2022, stanje: novo, Complete solution for conveying bulk materials such as wood chips, wood pellets, shredded material, granulate, etc. Aluminum angle conveyor belt including supporting structure Horizontal section: 2,500 mm (customizable) Inclined section: 4,000 mm (customizable) Bend angle steplessly adjustable Feed height: horizontal (customizable) Discharge height individually adjustable Construction: height-adjustable (movable) Iiodpfx Ajilg U Ejnyjd Conveyor belt width 600 mm (customizable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt with cleats and corrugated sidewall Drive: 1.1 kW motor (customizable), speed approx. 0.3 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive supplied ready for connection, motor controller optional 8x adjustable machine feet for alignment Corrugated edge: 50x30 mm T-40 cleats - 300 mm pitch 2-ply for maximum cross-stability We always have various systems of this type in stock. The lead time for a customized system is currently around 2–3 weeks, depending on the production effort. Our core competence lies in supplying customers exactly what they really need. We work together with our customers to develop customized, individual solutions and supply the corresponding systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 2.700 h, Oprema: pogon na vsa štiri kolesa, Caterpillar 434 Bager-nakladač 2.700 delovnih ur * Model: 434 * Leto izdelave: 2022 * Obratovalna teža: 9.520 kg Iijdpfx Asxpqgqonyed * Odlično stanje

Stanje: zelo dobro (rabljeno), IFA 85 kVA Diesel Generator – Made in Germany Iiedpfx Anoivtazjyod TECHNICAL SPECIFICATIONS: - Fuel type: Diesel - Engine: IFA 6VD14,5/12/2SRW - Alternator: VEB DGA 68/5 - Engine power: 68 kW - Maximum generator output: 85 kVA - Engine cooling: Liquid cooled - Number of cylinders: 6-cylinder - Dimensions (L/W/H): 270 / 120 / 210 cm - Weight: 1300 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, A used C.F. Nielsen BP 5000 briquette press in very good condition Iijdpewiw Rxefx Anyod

Stanje: potreben popravila (rabljeno), Leto izdelave: 2016, obratovalne ure: 90 h, Funkcionalnost: omejena funkcionalnost, vrsta goriva: dizel, moč: 44 kW (59,82 KM), nazivna moč: 44 kW (59,82 KM), neprekinjena moč: 44 kW (59,82 KM), neprekinjena (navidezna) moč: 55 kVA, For sale: Diesel generator ETT-55E (55 kVA) Condition: Used. The cooling pump is not working, oil is entering the engine, and the oil pump needs replacement. Otherwise, technically maintained. Can be started upon request. An additional new fuel pump is included. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and sound-insulated canopy. Suitable for backup power supply or continuous use in industrial or construction settings. Technical specifications: Model: ETT-55E Operating hours: 90 hrs Power (Standby): 55 kVA / 44 kW Power (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4-cylinder, water-cooled) Generator (alternator): WHI224D, brushless, with Automatic Voltage Regulation (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 Speed: 1500 rpm Cooling: Water-cooled Fuel consumption: ~10 L/hour (at 100% load) Fuel tank capacity: 260 L (up to 8 hours of continuous operation) Iiodexlngajpfx Anysd Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Control & Equipment: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator management Protection against overvoltage, overload, and low oil pressure Sound-insulated canopy – reduced noise level Manual or automatic operating mode Application: The generator is suitable for: - Industrial enterprises, warehouses, production facilities - Construction sites and mobile workplaces - Backup power supply for hotels, hospitals, office buildings, or farms A reliable solution where a stable, uninterrupted power supply is required. If you have any further questions – please feel free to contact us.

Stanje: rabljeno, prevoženi kilometri: 175.605 km, moč: 120 kW (163,15 KM), prva registracija: 07/2017, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: mehanski, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, je imel nesrečo, klimatska naprava, Special equipment: Overhead storage compartment in driver's cab, Hill Start Assist, 13-pin trailer socket, Audio system Audio 15 (radio with color display), Outside temperature indicator, Ceiling light in cargo area, Wooden floor in cargo space, Steering wheel (mechanically adjustable steering column), Becker MAP Pilot navigation system, Cross member with integrated step, Smoker package, Spare wheel with regular tires, Spare wheel holder under rear frame incl. jack, Sliding door left side cargo/passenger area, Rear mud flaps, Front mud flaps, Seats in driver's cab: twin passenger seat, Seats in driver's cab: comfort suspension seat, driver's side, Rear stabilizer, Reinforced front stabilizer, Additional electric heater (air). Additional features: Isdsuuwrwjpfx Anysid 3rd brake light, Adaptive brake light, Driver's airbag, Washer fluid level indicator, Both exterior mirrors electrically adjustable and heated, Exterior mirrors with integrated indicator, 74 Ah battery, Brake assist, ABS+ASR braking system, Roof lining in driver's cab, Lockable glove compartment, Rear doors (opening angle 180 degrees), Body/build: high-roof panel van, Child safety lock, Main fuel tank: 75 liters, Full-length bulkhead, Load securing/tie-down rings, Headlight range adjustment, Facelift/model update, Engine 2.1 L - 120 kW CDI CAT, Wheelbase 3250 mm, Low emission according to Euro 6 standard, Sliding door right side cargo/passenger area, Seatbelt system with warning device (driver's side), Seat covers/upholstery: Lima fabric, Steel wheels 6.5x16, Assyst maintenance interval display, Heat-insulating glazing, Perm. total weight 3.50 t * VIN: WDB9066311P534300 * Front right accident * Net price Tel./WhatsApp:

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Basic Information Manufacturer TOS SVITAVY Model PKSN 32 B Category Multi-blade Saws Shipping Delivery To be agreed Semesters Technical Specifications Maximum working width: 400 mm Machine with simultaneous transport and processing of the workpiece CE certified machine Used machine Minimum working length: 330 mm Motor power: 55 kW Supply voltage: 380-400 V Safety features Completely refurbished Electrically controlled adjustments Fully operational Excellent condition Spindle diameter: 70 mm Single tool spindle Equipped with noise reduction enclosure Iisdohixkhjpfx Anyjd Cast iron body Feed speed: 36 m/min Spindle lock Maximum cutting height: 160 mm New electrical system New mechanical components New pneumatics New appearance Noise level: 70 dB Right and left rotation Automatic adjustment Very good condition Cutting width: 400 mm Machine width: 1800 mm Working width Saw blade diameter: 400 mm Machine weight: 3500 kg Machine dimensions: 1600 x 1800 x 2500 mm Cutting height Processing height: 160 mm Infinitely variable feed speed With in-machine workpiece transport

Leto izdelave: 2025, obratovalne ure: 2 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. This is a complete (compact) unit, mounted on a base frame, consisting of the following components: - Raw material storage bin 4 m³, incl. agitator - Hammer mill with 22 kW drive power for shredding raw material (e.g., wood chips) - Inclined mixer for raw material incl. level sensors and fully automatic moisture dosing - Dosing hopper for pressing aids (e.g., corn starch) - Dosing screw for optimal feeding of the press (speed-controlled) - Press with 30 kW drive power, horizontal ring die, discharge chute, temperature monitoring, overfill protection, etc. - Conveyor belt for pellet discharge, discharge height approx. 2.5 m - Drum screen for dedusting and cooling of the pellets Iijdpfoxlif Rex Anysd The entire system is centrally operated via Siemens PLC with touch display. All parameters are permanently monitored so that the system will shut down in case of a problem! The plant is pre-configured and prepared for operation with a second press! Price excl. VAT! !!! Attention! We are continuously seeking distribution and service partners worldwide !!!