Optimum Uf 100 nakup rabljenega (27.447)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optiturn L34 HS CNC lathe - Directly from the manufacturer. L34 HS – The OPTIMUM CNC lathe with Siemens SINUMERIK 808D Advanced PPU 150 control system. - Reinforced machine bed made of grey cast iron - Sophisticated spindle bearing system - Emergency stop punch button - Central lubrication - Spindle and feed motors supplied by Siemens - Maintenance-friendly protective enclosure - Rear service access panel for maintenance - Safety interlock on the front sliding door - Turret is located behind the turning center (left-hand turning tools) - Linear guideways - "SINUMERIK 808D on PC" software package included (practical training software that allows workpieces to be programmed and simulated offline on a PC; free to download) Technical Data Iodsymlfkspfx Abxsic Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 6.5 kVA Spindle - Drive motor (S1 operation): 3.7 kW - Drive motor torque (S1 operation): 23.6 Nm - Torque at spindle: 40 Nm - Spindle mount: DIN 6350 A2-3 - Spindle bore: Ø 46 mm Coolant system - Coolant pump power: 95 W - Tank capacity: 75 liters Machine Data - Center height: 165 mm - Center distance: 600 mm - Swing over cross slide: Ø 146 mm - Swing over bed: Ø 350 mm Speed range - Spindle speeds*: 30 - 3500 rpm Tool Turret - Type: Electric - Number of tool stations: 6 tools - Maximum square tool size (height/width): 16 mm - Maximum boring bar diameter: 16 mm Accuracy - Repeatability: ± 0.01 mm - Positioning accuracy: ± 0.01 mm Travel - X-axis: 145 mm - Z-axis: 465 mm Feed rate - X-axis: 6,000 mm/min - Z-axis: 8,000 mm/min Machine leasing available through Siemens Finance, subject to liquidity.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optiturn Premium CNC lathe, direct from the manufacturer. S600M – The OPTIMUM Premium CNC lathe equipped with Siemens SINUMERIK 828D control system. • Heavy-duty design • Renishaw probing arm for manual tool measurement • Ball screw drive with enhanced accuracy, rigidity, and thermal stability • Siemens servo motors on all axes • All servo motors with integrated encoder for highest precision • 45° slant-bed design for particularly large components • Hydraulic three-jaw chuck, Ø 200 mm • Sauter tool turret VDI 40 with 8 tool positions and driven tools • Hardened and precision ground ball screws for high rapid traverse speeds on all axes • Manual tool measurement setup • Tailstock with hydraulic quill • Heat exchanger • Portable electronic handwheel with enabling switch and emergency-stop strike switch greatly facilitates program setup • Belt-type chip conveyor • Work lamp for full illumination of the workspace • Coolant system with cleaning gun Linear guides • Maximum static and dynamic rigidity • High positioning accuracy • Smooth, backlash-free movement • Hydraulic VDI 40 turret • All 12 stations powered by an integrated motor designed for speeds up to 4,000 rpm Machine bed • Heavily ribbed • 45-degree slant • High stiffness and durability • Facilitates chip removal SAFETY Integrated – Setup operations with door open • Functional safety also protects against high costs! Complete package • Safety Integrated • Remnant material detection and processing • ShopMill step programming • Manage network drives • 3-D simulation • Path tracking SIEMENS OSS Plus additional packages • 12 months; item no. 3589020 • 24 months; item no. 3589021 • 36 months; item no. 3589022 Dimensions and weights Length approx. 4570 mm Width/depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Work areas Chuck diameter: 320 mm Turning length: 475 mm Swing over bed: 570 mm Iisdsymk Ukspfx Abxoc Swing over cross slide: 400 mm C-axis (optionally ex works) Angular accuracy: 51" Repeatability: 20" Motor torque X-axis: 11 Nm Z-axis: 11 Nm Speed range Speed range: 30 – 4000 rpm Rapid traverse speed X-axis: 24 m/min Z-axis: 30 m/min Electrical data Supply voltage: 400 V Line frequency: 50 Hz Electrical connection Total connected load: 40 kVA Accuracy Repeatability: ± 0.002 mm Positioning accuracy: ± 0.004 mm Chuck through-hole diameter: 51 mm Slant-bed angle: 45° Tailstock Taper: MK 5 Quill travel: 100 mm Quill diameter: 100 mm Quill actuation: hydraulic Spindle Spindle mount: DIN ISO 702-1 No. 6 Main spindle hydraulic chuck: 200 mm Spindle nose: A2-6 Main spindle bore: 65 mm Travel X-axis: 235 mm Z-axis: 530 mm Vertical spindle Drive motor power, continuous S1: 11 kW Drive motor power, S6-30% duty: 22 kW Drive motor torque: 70 Nm Drive motor torque, S6-30% duty: 140 Nm Feed force Feed force X-axis: 8.4 kN Feed force Z-axis: 5.6 kN Tool changer Type: Servo VDI 40 – DIN 5480 Number of tool positions: 12 Drive motor power: 4.82 kW Permissible maximum speed at tool coupling: 6000 rpm Maximum tool torque: 20 Nm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe – direct from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe equipped with Siemens SINUMERIK 828D control stands out for its power, speed, precision, and long service life. Dimensions and Weights Max. width/depth: 2300 mm Length approx.: 2530 mm Width/depth approx.: 1595 mm Height approx.: 1795 mm Weight approx.: 2600 kg Working Ranges Chuck diameter: 150 mm Chuck actuation: Hydraulic Center height: 223 mm Distance between centers: 850 mm Swing over bed: 446 mm Swing over gap: 520 mm Swing over cross slide: 240 mm Bed width: 300 mm Motor Torque X-axis: 6 Nm Z-axis: 8.5 Nm Speed Range Number of speed ranges: 1 Speed range: 10 – 3000 rpm Electrical Data Drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 23 kVA Accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Hydraulic System Motor power: 0.75 kW Tank capacity: 50 l Ball Screw X-axis diameter: 25 mm X-axis pitch P: 5 mm X-axis accuracy class: C3 Z-axis diameter: 40 mm Z-axis pitch P: 5 mm Z-axis accuracy class: C3 Coolant System Coolant pump power: 270 W Tank capacity: 90 l Machine Data Bar capacity diameter: 40 mm Motor(s) Drive motor torque: 33 Nm Tailstock Taper: MT 4 Quill stroke: 165 mm Quill diameter: 52 mm Spindle Spindle nose: DIN ISO 702-1 No. 5 Spindle bore/bar capacity diameter: 52 mm Control Type: Sinumerik 828D PPU 240 Iijdpsymkwrjfx Abxec System software: SW 24 CNC memory: 3 MB Look Ahead: 50 Block change time: 3 ms Number of tool positions: 128 Travel X-axis: 250 mm Z-axis: 760 mm Vertical Spindle Continuous-duty drive motor power S1: 7 kW Drive motor power S6-30% duty: 16 kW Drive motor torque: 33 Nm Drive motor torque S6-30% duty: 80 Nm Feed Rate X-axis: 15,000 mm/min Z-axis: 15,000 mm/min Feed Force Feed force X-axis: 7.5 kN Feed force Z-axis: 5.3 kN Tool Changer Type: Hydraulic; VDI 30 Number of tool stations: 8 Max. tool holder height/width (square): 20 x 20 mm Max. boring bar holder diameter: 25 mm • SIEMENS spindle and servo motors • Fully enclosed with safety device • Standard with max. spindle speed up to 3000 rpm • Automatic central lubrication • Swivelling operator panel • Tailstock cover • Electronic handwheels for X and Z axes • Coolant system with 90-liter coolant tank • RJ45 interface, USB port, and 230 V power outlet • Electromagnetic compatibility (EMC) • Six leveling feet • Operator's tools SINUMERIK 828D Basic COMPLETE PACKAGE • Safety Integrated • Remnant detection and machining • ShopTurn step programming • Manage network drives • 3-D simulation • Graphic tracking Control • 10.4" color display • 4:3 format • User-friendly SINUMERIK Operate software • Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) card Guideways • Robust flat-bed guides Ball Screw • High rapid traverse speeds in all axes • Reduced wear • High positioning and repeat accuracy

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control system stands out for its performance, speed, precision, and long service life. - All linear guides with stainless steel covers - Automatic central lubrication - SIEMENS servo drive on all axes (open-loop control) - Max. spindle speed: 4000 rpm - Work area machine light - Portable electronic handwheel with enabling switch and emergency-stop slam switch. Greatly simplifies program setup - Tool changes by push button - Large access doors to minimize cleaning and maintenance time - Software package 'SINUMERIK 808D on PC' included (practical training software for offline programming and simulation of workpieces on PC; available for free download) SINUMERIK 808D ADVANCED – CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC system. The compact and user-friendly entry-level solution is used for basic milling applications. Features such as simple operation, commissioning, and maintenance make it the perfect foundation for equipping CNC machines. Isdpfx Absymkkfjxsic Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel with IP65 protection class, the SINUMERIK 808D ADVANCED is ideally prepared for operation in harsh environments. Its compact dimensions make it suitable for installation in smaller machines. INCLUDED - RJ45 Ethernet port - 8.4" LCD color display with 800 x 600 resolution - Remote maintenance ready Dimensions & Weights - Length: approx. 1410 mm - Width/depth: approx. 1372 mm - Height: approx. 2007 mm - Weight: approx. 1000 kg Drilling/Milling capacity - Max. cutter head size: 50 mm - Max. shank cutter size: 25 mm Electrical Data - Connection voltage: 400 V - Network frequency: 50 Hz - Electrical connection - Total connected load: 5 kVA Horizontal Milling Table - Length: 620 mm - Width: 180 mm - Distance vertical spindle – milling table min.: 50 mm - Distance vertical spindle – milling table max.: 295 mm - T-slot size: 12 mm - Number of T-slots: 3 - T-slot spacing: 50 mm - Maximum load capacity: 30 kg Accuracy - Repeatability: ± 0.02 mm - Positioning accuracy: ± 0.01 mm Coolant/Lubricant System - Coolant pump drive power: 95 W - Tank capacity: 30 l Travel - X-axis (auto): 355 mm - Y-axis (auto): 190 mm - Z-axis (auto): 245 mm Vertical Spindle - Spindle taper: BT 30 - Speed range: 4000 rpm - Note: max. spindle speed must be reduced by approx. 20% during continuous operation - Drive motor power S1 (continuous): 1.5 kW - Drive motor power S6-30% (intermittent): 2.2 kW - Drive motor torque S1 (continuous): 9.5 Nm - Drive motor torque S6-30%: 14 Nm Feed Rate - X-axis: 10,000 mm/min - Y-axis: 10,000 mm/min - Z-axis: 10,000 mm/min Feed Motor Torque - X-axis S1 (continuous): 1.9 Nm - Y-axis S1 (continuous): 3.5 Nm - Z-axis S1 (continuous): 3.5 Nm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine – direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and long service life. • Machine in column design made of cast iron for high rigidity • Carousel-type tool changer with eight tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive in all axes (closed-loop system) • Maximum spindle speed of 10,000 rpm • Portable electronic handwheel with enabling switch and emergency stop button significantly facilitates program setup • Coolant system with a 70-liter coolant tank • Tool changes carried out automatically or by pressing a button (electropneumatic tool clamping system) • Heavy-duty, precision-milled worktable – large, dimensionally stable, and precision ground for high accuracy • Very generously sized access doors to minimize cleaning and maintenance time • LED machine lamp for complete illumination of the work area • SIEMENS add-on package: material defect liability and free on-site service OSS SINUMERIK 808D • Software package with identical control layout, ensuring process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoder – no homing required • Higher accuracy Control • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS add-on package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 • Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical specifications Connection voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 10 kVA Milling table (horizontal) Length: 690 mm Width: 225 mm Distance vertical spindle–table min.: 90 mm Distance vertical spindle–table max.: 410 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 150 kg Accuracy Repeat accuracy: ± 0.015 mm Positioning accuracy: ± 0.015 mm Pneumatic connection Operating pressure: 6 bar Travel X-axis (automatic): 330 mm Y-axis (automatic): 220 mm Iedpeymkdxjfx Abxjic Z-axis (automatic): 320 mm Distance spindle–column min.: 280 mm Distance spindle–column max.: 280 mm Vertical spindle Spindle taper: BT 30 Speed range: 10,000 rpm Drive motor power S1 (continuous): 3.7 kW Drive motor power S6-30%: 5.5 kW Drive motor torque S1 (continuous): 24 Nm Drive motor torque S6-30%: 36 Nm Feed rate X-axis: 15,000 mm/min Y-axis: 15,000 mm/min Z-axis: 15,000 mm/min Feed motor torque (continuous, S1) X-axis: 3.5 Nm Y-axis: 6 Nm Z-axis: 6 Nm Tool changer Design: carousel Number of tool stations: 8 Max. tool diameter: 100 mm Max. tool length: 200 mm Max. tool weight: 6 kg Tool-to-tool change time: 7 s

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine is located in the showroom. Optimill F 80 CNC milling machine, directly from the manufacturer. F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control stands out thanks to its performance, speed, precision, and long service life. • Column-type machine frame made from cast iron for high rigidity • Carousel tool changer with 12 tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drives on all axes (closed-loop control) • Maximum spindle speed of 10,000 rpm • Portable electronic handwheel with enabling switch and emergency stop facilitates program setup • Coolant system with 70-litre coolant tank • Tool change can be performed automatically or at the push of a button (electropneumatic tool clamping) • Massive, precise milling table – large dimensions and precision-machined surface • Large access doors to minimize cleaning and maintenance time • LED machine light for full illumination of the work area SINUMERIK 808 ADVANCED Compact and robust Communicative • Front USB panel (IP65) • Serial interface RS232C • RJ45 Ethernet at the rear User-friendly • Technology-specific keyboard layout • Hard keys with protective membrane Process-safe • LED tool number display • MCP with rotary switch for feed and spindle override Comprehensive package • RJ45 Ethernet port • Prepared for remote maintenance • AST function; enables easy optimization for higher dynamic and accuracy requirements • Absolute encoder / no homing sequence required • Higher accuracy Dimensions and weights Length approx. 1995 mm Width/depth approx. 1930 mm Height approx. 1640 mm Weight approx. 2300 kg Iiedpfx Abjymkcujxjc Rapid traverse speed X axis 20 m/min Y axis 20 m/min Z axis 20 m/min Electrical data Connected voltage 400 V Line frequency 50 Hz Total power requirement 12 kVA Milling table (horizontal) Length 800 mm Width 260 mm Distance vertical spindle – table min. 100 mm Distance vertical spindle – table max. 550 mm T-slot size 16 mm Number of T-slots 5 T-slot spacing 50 mm Max. load capacity 200 kg Precision Repeatability ± 0.01 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump motor power 450 W Tank capacity 80 l Pneumatic connection Operating pressure 7 bar Traverse paths X axis (automatic) 450 mm Y axis (automatic) 260 mm Z axis (automatic) 450 mm Distance spindle – column max. 370 mm Vertical spindle Spindle taper BT 40 Speed range 50 – 10,000 rpm Note on speed range: Maximum continuous spindle speed must be reduced by about 20% for continuous operation Drive motor rated power (S1) 3.7 kW Drive motor power (S6-30% duty) 5.5 kW Drive motor torque (S1) 24 Nm Drive motor torque (S6-30% duty) 36 Nm Feed motor torque X axis (S1) 6 Nm Y axis (S1) 6 Nm Z axis (S1) 11 Nm Tool changer Type: Carousel Number of tool stations: 12 tools Max. tool diameter: 95 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time (chip-to-chip): 7 s

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, The machine is currently on display and has only been used for demonstration purposes. Optimill F 120X CNC milling machine directly from the manufacturer. F 120X – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. Iedsymkbqspfx Abxjic - Heavy-duty design - High productivity - Linear guides for rapid traverse speeds in all axes - 21-tool magazine automatic tool changer - High reliability - Machine body cast from high-quality Meehanite cast iron - Precision-ground cross table with 3 T-slots - Strongly ribbed, torsion-resistant machine base - Precision-ground, preloaded high-performance ball screws in all axes - High-torque servo drives mounted directly to the ball screws in all 3 axes - Electronic handwheel - Chip conveyor - Cleaning gun - RJ45 connection, USB port, and 230V power supply - Coolant system with 210-liter coolant tank - Heat exchanger Included options: - PPU 290 Touch Panel - 16,000 rpm inline spindle with oil cooler - Belt conveyor with chip trolley Machine leasing is available through Siemens Finance. Liquidity is required. Dimensions and Weights - Length approx. 2,315 mm - Width/Depth approx. 2,194 mm - Height approx. 2,325 mm - Weight approx. 3,800 kg Drilling and Milling Capacity - Maximum cutter head size: 80 mm Feed/Rapid Traverse Speed - X-axis: 40,000 mm/min - Y-axis: 40,000 mm/min - Z-axis: 40,000 mm/min Electrical Data - Connection voltage: 400 V - Number of phases: 3 - AC current - Mains frequency: 50 Hz - Electrical connection - Total connected load: 45 kVA Vertical Spindle to Table Distance - Min.: 150 mm - Max.: 450 mm T-slot size: 14 mm Number of T-slots: 3 Distance between T-slots: 125 mm Maximum load capacity: 250 kg Accuracy - Repeatability: ± 0.006 mm - Positioning accuracy: ± 0.005 mm Coolant System - Coolant pumps - Drive power per coolant pump: 370 W - Tank capacity: 120 l Control System - Type: Sinumerik 828D PPU 290 - System software: SW 28x - CNC memory: 8 MB - Block change time: 2 ms - Look Ahead: 150 - Number of tools: 512 Travel - X-axis automatic: 500 mm - Y-axis automatic: 400 mm - Z-axis automatic: 300 mm Vertical Spindle - Spindle taper: BT 30 - Speed range: 10 – 16,000 rpm - Drive motor output (continuous operation S1): 12 kW - Drive motor output (S6-30% duty cycle): 22.8 kW - Drive motor torque (continuous operation S1): 38 Nm - Drive motor torque (S6-30% duty cycle): 116 Nm Feed Motor Torque - X-axis (continuous operation S1): 6 Nm - Y-axis (continuous operation S1): 6 Nm - Z-axis (continuous operation S1): 11 Nm Servo Tool Changer - Type: Carousel in front of the spindle - Number of tool positions: 21 tools

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optimill F110 ECO Premium CNC milling machine directly from the manufacturer. F110 ECO – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D control is distinguished by its performance, speed, precision, and long service life. Model: F110 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling Spindle: Belt Drive Machine Data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Isdpfx Aboymkbkjxeic Milling Spindle Drive motor S1 operation: 7.5 kW Torque drive motor S1 operation: 45 Nm Drive motor S6 30% operation: 16.2 kW Torque drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Coolant System Coolant pump power: 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool to tool: 2.5 seconds Travel Paths X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z axis: 48 / 48 / 32 m/min Motor Torque X / Y / Z axis: 11 Nm / 11 Nm / 20 Nm Feed Forces X / Y / Z axis: 3.67 kN / 3.67 kN / 6.68 kN Speed Range Spindle speeds*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6–8 kg/m³ Milling Table Spindle to table distance: 100–600 mm Table length x width: 800 x 400 mm T-slot size / number / spacing: 18 mm / 3 / 100 mm Maximum load capacity: 400 kg Dimensions Length x width x height: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg Equipment Linear guideways with ball screws for high rapid traverse speeds on all axes Telescopic way covers on all three axes Automatic lubrication Portable electronic handwheel with enabling switch and emergency stop RJ45 port and 230 V power outlet Work light in the machining area Cleaning gun Ball screws and linear guides from THK Chip flushing Cooling at the spindle head (machining area) Electrical cabinet Arm-type tool changer SW24 CE compliant *More options available.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display. Optimill F 110 E CNC milling machine directly from the manufacturer. F 110 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control system stands out for its performance, speed, precision, and long service life. · Heavy-duty construction · High productivity · High reliability · Strongly ribbed, torsion-resistant machine base · Profile guideways with recirculating ball screws for high rapid traverse speeds in all axes Ijdpfx Abeymkbdoxsic · High-torque servo drives on all three axes · Telescopic way covers on all three axes · Automatic lubrication · Spindle oil cooler · Massive, precision-ground milling table with three T-slots, oversized and ground for accuracy · The portable electronic handwheel with enable switch and emergency stop button greatly simplifies program setup · Coolant system with chip flushing device and cleaning gun · Auger-type chip conveyor · Chip trolley · RJ45 port and 230 V power connection · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents the ingress of dust particles · Machine lamp provides over 500 lux in the working area RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote diagnostics AST function; enables easy optimization for higher demands on dynamics and accuracy Absolute encoder / no reference run necessary Higher accuracy Travel: X = 650 mm Y = 400 mm Z = 500 mm Dimensions and Weights Length approx. 2100 mm Width/Depth approx. 2300 mm Height approx. 2750 mm Weight approx. 4100 kg Drilling-Milling Capacity Maximum tool diameter: 90 mm Electrical Data Connection voltage: 400 V Frequency: 50 Hz Electrical connection Total connected load: 20 kW Milling Table (Horizontal) Length: 850 mm Width: 400 mm Distance vertical spindle – table min.: 100 mm Distance vertical spindle – table max.: 600 mm T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 100 mm Maximum table load: 400 kg Accuracy Repeatability: ±0.005 mm Positioning accuracy: ±0.005 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display. Optimill F 110 HSC Premium CNC Milling Machine, direct from the manufacturer. F 110 HSC – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D Control stands out for its performance, speed, precision, and long service life. · Heavy-duty construction · High productivity · High reliability · Robust, torsion-resistant machine base with strong ribbing · Profile rail with recirculating ball bearings for high rapid traverse speeds in all axes · High-torque servo drives in all three axes · Telescopic way covers on all three axes · Automatic lubrication · Solid, precise milling table with three T-slots, generously dimensioned and precision ground · The portable electronic handwheel with enabling button and emergency stop pushbutton greatly facilitates program setup · Coolant system with chip flush and cleaning gun · Belt-type chip conveyor ensures efficient chip removal · Chip trolley · RJ45 interface and 230 V power connection · Enclosed electrical cabinet with integrated heat exchanger for optimal temperature control and prevention of dust ingress · Machine light in the working area · Additional SIEMENS warranty for material defects and free online/on-site service OSS Plus · 1-year basic maintenance contract included for Germany/Austria/Switzerland Spindle: Inline spindle Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling spindle Drive motor S1 operation: 9 kW Torque, drive motor S1: 57 Nm Drive motor S6-30% operation: 21.2 kW Torque, drive motor S6-30%: 135 Nm Spindle taper: SK 40 / DIN 69871 Optional internal spindle cooling Drive motor S1 operation: 10.5 kW Torque, drive motor S1: 50 Nm Drive motor S6-30% operation: 26.4 kW Torque, drive motor S6-30%: 125 Nm Cooling lubricant system Coolant pump output (2 units): 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Cleaning pump output: 530 W Milling accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Isdpfx Aboymka Hjxjic Tool changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (if adjacent stations are empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 2.5 seconds Travel distances X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed drive Rapid traverse (X, Y, Z): 48 / 48 / 32 m/min Motor torque (X/Y/Z): 11 Nm / 11 Nm / 20 Nm Feed forces X/Y/Z: 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds*: 12,000 rpm Pneumatics Air pressure: 6 bar Air consumption per hour: 6–8 kg/m³ Milling table Spindle-to-table distance: 100–600 mm Table (L x W): 850 x 400 mm T-slot size/quantity/spacing: 18 mm / 3 / 100 mm Max. table load: 400 kg Dimensions L x W x H: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optimill F200 ECO Premium CNC milling machine, direct from the manufacturer. F200 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system sets itself apart through its performance, speed, precision, and long service life. Model: F200 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle belt drive Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling spindle Drive motor S1 duty cycle: 9 kW Drive motor torque S1 duty cycle: 57 Nm Drive motor S6 30% duty cycle: 17.1 kW Drive motor torque S6 30% duty cycle: 118 Nm Spindle taper: BT40 Coolant system Coolant pump power: 900 W Max. delivery rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling precision Repeat accuracy: 0.008 mm Positioning accuracy: 0.004 mm Tool changer Type: Double arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time: tool to tool 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drive Rapid traverse, X/Y/Z axes: 48 / 48 / 48 m/min Motor torque X / Y / Z axis: 16 Nm / 16 Nm / 20 Nm Feed forces X / Y / Z axis: 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds*: 10,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6 - 8 kg/m³ Milling table Spindle-to-table distance: 100 – 650 mm Table length x width: 1000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. table load: 500 kg Dimensions Ijdpfx Abeymd Nbsxjic Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg Features • Linear guides with precision ball screws for high rapid traverse speeds on all axes • Telescopic way covers on all three axes • Automatic lubrication • Portable electronic handwheel with enabling switch and emergency stop • RJ45 and 230 V power connection • Machine light in work area • Cleaning gun • THK ball screws and linear guides • Chip flushing • Spindle head cooling (machining area) • Electrical cabinet • Arm-type tool changer • SW24 • CE *More options available

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optimill F 200 HSC Premium CNC milling machine, direct from the manufacturer. F 200 HSC – The OPTIMUM premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Strongly ribbed, torsion-resistant machine base · Profile rails with roller guides enable high rapid traverse speeds on all axes · High-torque servo drives on all three axes · Telescopic guideway covers on all three axes · Automatic lubrication · Solid, precise milling table with five T-slots, generously dimensioned and ground for precision · The portable electronic handwheel with enabling switch and emergency stop button greatly facilitates program setup · Coolant system with chip flushing and cleaning gun · Through-spindle cooling with 20 bar · Belt-type chip conveyor ensures efficient chip removal · Chip trolley · RJ45 connector and 230 V power outlet · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents dirt particle ingress · Machine light in the work area · SIEMENS extended warranty package for material defects plus free online/on-site OSS Plus service · 1-year Basic maintenance contract included (valid in Germany/Austria/Switzerland) Milling spindle: Inline spindle Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 20 kVA Milling spindle Drive motor S1 operation: 10.5 kW Motor torque S1 operation: 50 Nm Drive motor S6-30% operation: 26.4 kW Motor torque S6-30% operation: 125 Nm Spindle taper: SK 40 / DIN 69871 Coolant lubrication system Pump output (3 pumps): 1 kW Flow rate: 35 l/min Tank capacity: 200 liters Cleaning pump Cleaning pump output: 530 W Milling accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer Type: Double-arm gripper Number of tool stations: 24 Max. tool diameter: 78 mm Iedpfsymd Hmsx Abxsic Max. tool diameter (adjacent stations free): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drives Rapid traverse X, Y, Z: 48 m/min Motor torque X/Y/Z: 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z: 5.34 kN / 5.34 kN / 6.68 kN Spindle speed range Speeds*: 12,000 rpm Pneumatics Air pressure: 6–8 bar Air consumption per hour: 6–8 kg/m³ Milling table Spindle-to-table distance: 100–650 mm Table dimensions (L x W): 1,000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. load capacity: 500 kg Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg !!!Image optionally shown with 3D printer, not included in the price!!!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine is on display. Optimill F 300 HSC Premium CNC milling machine direct from the manufacturer. F 300 HSC – The OPTIMUM premium CNC milling machine equipped with the Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile rail guides with roller bearings in all axes for high load capacity • High-torque servo drives mounted directly to the ballscrews in all three axes • Precision-ground, preloaded, high-performance ballscrews for rapid traverse speeds in all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with up to 15,000 rpm and inline spindle • Solid, precise milling table with five T-slots, generously dimensioned and precision-ground • Portable electronic handwheel with enabling button and emergency stop button greatly simplifies program setup • Tool changer with double gripper and 30-tool capacity • Coolant system with chip flushing and cleaning pistol • Through-spindle coolant supply at 20 bar • Belt-type chip conveyor for efficient chip removal • Chip trolley • Oil separator • Work area machine lamp • Additional Siemens package: material defect liability and free Online-/On-site-Service OSS Plus • 1-year Basic maintenance contract included in DE/AT/CH Iijdpfeymd Epex Abxoc • Control system features • 15.6" color display • 16:9 format • Complete package • Safety Integrated • Remnant material detection and processing • ShopMill step programming • Network drive management • 3D simulation • Path tracing • Siemens OSS PLUS add-on package • 12 months; item no. 3589020 • 24 months; item no. 3589021 • 36 months; item no. 3589022 • Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 15,000 rpm • Dimensions and weights • Length approx. 2856 mm • Width/depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg • Rapid traverse speed • X-axis 36 m/min • Y-axis 36 m/min • Z-axis 32 m/min • Electrical data • Connection voltage 400 V • Mains frequency 50 Hz • Electrical connection • Total connected load 30 kVA • Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 18 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg • Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm • Travel • X-axis automatic 1000 mm • Y-axis automatic 620 mm • Z-axis automatic 630 mm • Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 15,000 rpm • Drive motor power S1 continuous operation 20 kW • Drive motor power S6-30% operation 52.4 kW • Drive motor torque S1 continuous operation 96 Nm • Drive motor torque S6 30% operation 250 Nm • Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 12.01 kN • Feed motor torque • X-axis continuous operation S1 20 Nm • Y-axis continuous operation S1 20 Nm • Z-axis continuous operation S1 36 Nm • Tool changer • Double arm gripper • Number of tool stations 30 • Max. tool length 300 mm • Max. tool weight 8 kg • Tool-to-tool change time 2.5 s

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display and has only been used for demonstration purposes. Optimill F 150 E CNC milling machine, directly from the manufacturer. F 150 E – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and long service life. - Carousel tool changer with 16 tool positions - All linear guides with stainless steel covers - Central automatic lubrication system - Siemens main spindle motor - SIEMENS servo drives on all axes (closed loop) - Belt-type chip conveyor ensures efficient chip removal - Chip trolley - Maximum spindle speed: 10,000 rpm - Work area machine light - Portable electronic handwheel with enabling switch and emergency stop switch—significantly simplifies program setup - Coolant system with 190-liter coolant tank - Tool change is automatic or triggered at the push of a button - Heavy, precisely machined and large-scale milling table - Large access doors designed to minimize cleaning and maintenance time - “SINUMERIK 808D on PC” software package included. (Practical training software allowing for offline programming and simulation of workpieces on PC. The software can be downloaded free of charge.) SINUMERIK 808 ADVANCED – CNC technology from the market leader, combined with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control system. This compact and user-friendly entry-level solution is designed for simple milling applications. Features such as intuitive operation, commissioning, and easy maintenance make it the ideal basis for equipping CNC machines. Iisdpfoymdygex Abxjc Through its technology-specific configuration, the SINUMERIK 808D ADVANCED is perfectly preconfigured for milling. Thanks to hardware and software extensions, it provides sufficient performance for basic milling functions in mold and tool making. Compact and robust Thanks to its panel-based CNC design with minimal interfaces and an IP65-rated control panel, the SINUMERIK 808D ADVANCED is perfectly suited for use in harsh environments. Its compact dimensions enable installation in smaller machines. INCLUDED: - RJ45 Ethernet port - 8.4” LCD color display with 800 x 600 resolution - Prepared for remote maintenance - AST function: allows for easy optimization in tasks requiring greater dynamics and accuracy - Absolute encoder / No reference run required - Higher precision Travel distances: X = 750 mm Y = 500 mm Z = 500 mm Dimensions and weights: Length approx. 3,420 mm Width/Depth approx. 2,050 mm Height approx. 2,400 mm Weight approx. 4,500 kg Drilling/Milling performance: Maximum face mill diameter: 80 mm Maximum shank cutter diameter: 38 mm Electrical data: Supply voltage: 400 V Mains frequency: 50 Hz Total connected load: 15 kW Horizontal milling table: Length: 900 mm Width: 500 mm Vertical spindle – table distance min.: 100 mm Vertical spindle – table distance max.: 600 mm T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 80 mm Maximum table load: 350 kg Accuracy: Repeatability: ±0.005 mm Positioning accuracy: ±0.01 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, GT 25 – The OPTIMUM Premium NC Grinding Machine with Siemens Touchscreen. • Electromagnetic chuck for securing the workpiece with automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter guideways for high wear resistance and low friction • Grinding spindle equipped with high-precision bearings • Grinding wheel can be dressed directly on the machine using the built-in dressing device • Digital position indicator • Machine base constructed from rigid, torsion-resistant cast iron for maximum stiffness and stability • Longitudinal, cross, and vertical guideways are backlash-free and self-centering, designed as V- and flat guides • Precision ball screw drives • Central lubrication for guideways and feed screw • All flat guideways are finely scraped, guaranteeing the highest precision for all manual movements • Safety electrical system in 24 V DC • Oversized, isolated handwheels on all three axes • Hydraulic lines in accordance with DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all standard steels • Swiveling control panel for significantly easier operation • Separate hydraulic unit with heat exchanger to prevent vibration and thermal load • Two-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly lower energy consumption, resulting in considerable cost savings Technical Data: Dimensions and Weights Length approx. 2300 mm Width/Depth approx. 1600 mm Height approx. 1675 mm Weight approx. 1700 kg Electrical Data Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 phases Current type: AC Network frequency: 50 Hz Surface Grinding Table Length: 254 mm Width: 508 mm Grinding Wheel(s) Outer diameter: 200 mm Width: 20 mm Bore: 31.75 mm Peripheral speed: 33 m/s Spindle Speed: 2850 rpm Run-out accuracy: 0.005 mm Iodpfx Abeymdwfsxoic X-Axis Feed rate: 5 – 25 m/min Package Unit: 1 Scope of Delivery Quantity unit: piece Packaging unit: 1 Digital position display Coolant system Balancing mandrel Grinding wheel, grit 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic chuck Demagnetizing function Equipment Electromagnetic chuck Splash guard table enclosure Automatic demagnetizing device Parallel wheel dressing device Coolant system 40 W Work light: LED lamp Leveling feet

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, GT 40 – The OPTIMUM Premium NC Grinding Machine with Siemens Touch Screen. • Electromagnetic clamping plate for secure workpiece fixation with automatic demagnetizing function • High-quality spindle with precision taper roller bearings • Hardened and ground table guideways • Turcite-B coated counterguides for high wear resistance and low friction • Grinding spindle equipped with premium precision bearings • Grinding wheel can be dressed directly on the machine using the integrated dressing device • Digital position display • Machine base made from robust, torsion-resistant cast iron for maximum rigidity and stability • Guideways for longitudinal, cross, and vertical axes are backlash-free and self-centering, designed as V- and flat guides • Precision ball screw drives • Guideways and feed screws with centralized lubrication • All flat guideways are finely scraped, ensuring maximum precision for all manual movements • 24 V DC safety electrics • Large, decoupled handwheels on all three axes • Hydraulic lines to DIN EN 853 standard • Grinding accuracy: 0.005 mm • Aluminum oxide grinding wheel, grit 46, suitable for all common steel types • Swiveling control panel greatly facilitates operation • Separate hydraulic unit with heat exchanger prevents vibration and thermal stress • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Fitted with an IE3 motor – significantly lower energy consumption, resulting in substantial cost savings Iiedpfx Ajymduqebxsc Dimensions and Weight Length approx. 3600 mm Width/Depth approx. 2400 mm Height approx. 1900 mm Weight approx. 3600 kg Electrical Data Total connected load 7.5 kW Connection voltage 400 V Mains frequency 50 Hz Surface Grinding Table Clamping area length 400 mm Clamping area width 800 mm Grinding Wheel(s) Outside diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 rpm Run-out accuracy 0.005 mm X-Axis Feed speed 5 – 25 m/min Included Equipment Digital position display Coolant system Balancing arbor Grinding wheel, grit 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Features Electromagnetic clamping plate Table enclosure splash guard Demagnetizing device Parallel dressing device ✔ Coolant system 125 W Working light LED lamp Leveling feet ✔

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, GT 30 – The OPTIMUM Premium NC Surface Grinding Machine with Siemens Touchscreen Panel. • Electromagnetic chuck for securing the workpiece, featuring automatic demagnetization • High-grade spindle with precision tapered roller bearings • Hardened and ground table guideways • Counter-guides coated with Turcite-B for excellent wear resistance and minimal friction • Grinding spindle equipped with premium precision bearings • Grinding wheel can be dressed directly on the machine using an integrated dressing device • Digital position display • Robust machine base made from torsion-resistant cast iron for maximum rigidity and stability • Play-free and self-centering longitudinal, cross, and vertical guideways configured as V and flat guides • Precision recirculating ball screws • Centrally lubricated guideways and feed screws • All flat guides are finely scraped to ensure the highest precision in all manual movements • Safety circuits operating at 24 V DC • Large, decoupled handwheels on all three axes • Hydraulic lines comply with DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel (grit size 46) suitable for all standard steels Iijdpfx Abjymdtysxsc • Swiveling control panel for greatly improved operability • Separate hydraulic unit with heat exchanger eliminates vibrations and thermal stress • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly lower energy consumption and substantial cost savings Dimensions and Weights Length: approx. 3200 mm Width/Depth: approx. 2200 mm Height: approx. 2100 mm Weight: approx. 3000 kg Electrical Data Total connected load: 6.5 kW Supply voltage: 400 V Mains frequency: 50 Hz Surface Grinding Table Clamping surface length: 300 mm Clamping surface width: 600 mm Grinding Wheel(s) Outer diameter: 350 mm Width: 40 mm Bore: 127 mm Peripheral speed: 27 m/s Spindle Speed: 1450 rpm Radial run-out accuracy: 0.005 mm X-Axis Feed rate: 5 – 25 m/min Scope of Delivery Unit of measure: piece Packaging unit: 1 Digital position display Coolant system Balancing arbor Grinding wheel, grit size 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic chuck Demagnetizing function Equipment Electromagnetic clamping plate Table enclosure splash guard Automatic demagnetizing device Parallel dressing fixture ✔ Coolant system: 125 W Worklight: LED lamp Leveling feet ✔

Stanje: rabljeno, Tank capacity (litres) 100 Motorised pumps Up to 2 external per tank Dosing output Max. 50 cc/sec per pump Iisdpfx Aevpfhyebxsc Technical remote support

Stanje: rabljeno, 🧰 Lastnosti izdelka • Stanje: rabljeno blago, glejte slike • Barva: siva • Material: kovina • Zunanje mere: 124 x 83,5 x 97 cm • Nosilnost: 1000 kg • Zložljivost v skladišču: 5000 kg • Teža: 78 kg • Sprednja stran: zložljiva • Dno: kovinsko dno z leseno vložko Iisdpfx Ajvb T Ewobxec 💰 Cena 99 € neto brez DDV. • Popust za količino: na zahtevo • Stroški pošiljanja: po Evropi na zahtevo • Dobavni rok: takoj dobavljivo • Ogled in prevzem: možen kadarkoli po dogovoru Stalno na zalogi več kot 5000 tekočih metrov paletnih regalov različnih proizvajalcev (Spremembe in napake v tehničnih podatkih, informacijah in cenah ter vmesna prodaja pridržane! Glejte naše splošne pogoje, vse cene brez DDV iz skladišča.)

Stanje: novo, Leto izdelave: 2026, The LUFT screw compressor represents state-of-the-art solutions in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust construction, as well as high device efficiency, guarantee effective and trouble-free operation. The LUFT 1000 stands out with its direct drive, resulting in significantly improved efficiency and reduced power losses compared to belt-driven models. This innovative solution ensures optimal use of motor power, delivering higher output while keeping energy consumption low. The maximum pressure generated by this screw compressor is 10 bar. Complete control over the unit's operating parameters is provided by the intuitive MAM series electronic control panel, giving you access to key compressor information and increasing flexibility and process control. Technical specifications Motor power: 7.5 kW Voltage: 400V/50Hz Capacity 0-6 bar: 990 L/min Capacity at 6 bar: 950 L/min Capacity at 8 bar: 950 L/min Iedpfxey E Hpce Abxeic Capacity at 10 bar: 930 L/min Outlet connection diameter (G): 1/2" Dimensions: 810 x 610 x 850 mm Weight: 160 kg

Stanje: novo, Leto izdelave: 2026, LUFT 1000 Screw Compressor with Inverter is a state-of-the-art solution for pneumatic applications, integrating premium-quality materials and components. Low operating costs, ease of use, ergonomic and robust construction, and high performance ensure efficient and trouble-free operation. Main advantages of 7.5 kW induction motor with frequency inverter: - Significant energy savings: The inverter allows for smooth and precise speed control of the induction motor. The compressor output is adjusted exactly to the current demand for compressed air, eliminating idle running (where the motor operates but does not produce air), frequent start/stop cycles, and energy losses from blowing off excess air. Depending on the air consumption profile in your facility, energy savings may range from 25% up to 50%. The more variable the air demand, the higher the savings. - Stable system pressure: Continuous speed regulation with the inverter maintains a nearly constant pressure in the compressed air network, regardless of demand fluctuations. This is crucial for the proper functioning of pneumatic tools and machinery, prevents pressure spikes, and increases process precision. - Reduced inrush currents and electrical load: The induction motor started via the inverter starts smoothly and gradually, eliminating high inrush currents that can load the electrical network and cause voltage drops. This protects the electrical infrastructure and reduces the risk of disturbances. - Extended component lifespan: Smooth operation without sudden starts or stops significantly reduces mechanical stress on the screw block, bearings, coupling, and the motor itself. This results in a longer compressor lifespan and lower service and spare parts costs. - Quieter operation: When operating at lower speeds (with lower demand), the compressor generates less noise, improving acoustic comfort in the workplace—a significant benefit for operators and the surrounding environment. - Greater flexibility and adaptability: The inverter-equipped compressor efficiently handles a wide range of compressed air demand, making it perfect for companies with fluctuating air consumption throughout the day, week, or month. Iiodpfxomqlhvo Abxoc - Advanced control and diagnostics: The inverter integrates with modern control panels, providing extensive parameters monitoring, error diagnostics, remote control, and maintenance scheduling. This gives users full control and system optimization for compressed air. Technical specifications Motor power: 7.5 kW Voltage: 400V/50Hz Capacity 0–6 bar: 990 L/min Capacity at 6 bar: 950 L/min Capacity at 8 bar: 950 L/min Capacity at 10 bar: 930 L/min Outlet diameter (G): 1/2" Dimensions: 810 x 610 x 850 mm Weight: 160 kg

Stanje: novo, Leto izdelave: 2026, LUFT 1000 COMPACT Screw Compressor with integrated refrigerated compressed air dryer. The CORMAK LUFT series screw compressor, manufactured by a renowned Polish brand, utilizes state-of-the-art solutions in pneumatics, combined with high-quality materials and components. Its low operating costs, ease of use, ergonomic and robust design, and high efficiency ensure effective and trouble-free operation. • Innovative design: Our compressors are built upon advanced engineering and European precision workmanship. The sturdy construction, enhanced with modern components, ensures long-lasting and trouble-free operation in any conditions. • Integrated refrigerated dryer: The COMPACT version with an integrated dryer is a space-saving and comprehensive solution in a single unit. The built-in refrigerated air dryer guarantees dry, clean air, protecting your installation against corrosion and damage. • Quiet operation & comfort: Designed with attention to detail, our compressors feature exceptionally low noise levels. Advanced noise suppression and vibration reduction systems provide a comfortable working environment, improving operator focus and well-being. • Intelligent control: The intuitive MAM series electronic control panel serves as your compressor’s command center. It provides precise parameter monitoring, service scheduling, and rapid diagnostics to assure the stability and protection of critical components. • Application adaptation: We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems for perfect alignment with industry-specific demands. Iiodpfxjxmg A Aj Abxec • Dynamic working pressure: Automatic pressure adjustment ensures your compressor delivers exactly the required amount of compressed air at any moment, maximizing energy efficiency and minimizing losses. • Sustainable development: We focus on environmentally friendly solutions. The energy-saving technologies integrated into our compressors reduce your costs and environmental impact, while the heat recovery option allows maximum energy utilization. Integrated refrigerated air dryer – highest air quality • Two-stage drying system: Ensures effective moisture removal and protects your pneumatic installation. • Variable speed fan: Automatically adjusts cooling performance to working conditions, saving energy. • Dual filtration system: 3.0 μm pre-filter removes larger solid contaminants, while a 0.1 μm precision filter captures fine oil particles (aerosols) and other impurities, ensuring the highest air purity. Technical specifications: Motor power: 7.5 kW Voltage: 400V/50Hz Capacity 0-6 bar: 990 L/min Capacity at 6 bar: 950 L/min Capacity at 8 bar: 950 L/min Capacity at 10 bar: 930 L/min Outlet connection diameter (G): 3/4” Dimensions: 1320 x 650 x 945 mm Weight: 320 kg

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Imamo tri škatle na zalogi, cena velja za eno škatlo. Ijdpfx Absvv Id Dexjic Popolnoma novo, nikoli uporabljeno. Rok uporabe: 17. 3. 2026 Oglejte si tudi naše ostale oglase.

Stanje: novo, Leto izdelave: 2026, Set including LUFT 1500 screw compressor with inverter, vertical air receiver with compressed air fittings, 1000-liter capacity, and IZBERG N20S dryer. The LUFT series screw compressor by the Polish brand CORMAK features the latest solutions in pneumatics combined with high-quality materials and components. Low operating costs, user-friendly operation, ergonomic and robust design, as well as high performance, guarantee efficient and trouble-free operation. Technical specifications LUFT 1500 INVERTER: - Motor power: 11 kW - Voltage: 400V/50Hz - Output at 0-6 bar: 1620 L/min - Output at 6 bar: 1580 L/min - Output at 8 bar: 1350 L/min - Output at 10 bar: 1230 L/min - Outlet port diameter (G): 1" - Dimensions: 1170 x 730 x 1020 mm - Weight: 243 kg Technical specifications IZBERG N20S: Iedpfx Abexnyhusxeic - Inlet/outlet diameter (BSP): 1" - Max. working pressure: 10 bar - Max. inlet air temperature: ≤ 38°C - Dew point temperature: 3°C - Capacity: 2800 l/min - Power: 0.58 kW - Power supply voltage: 230 V - Dimensions (L x W x H): 420 x 700 x 690 mm - Weight: 37 kg - Refrigerant type and amount: R134a, 550 g Technical specifications VERTICAL RECEIVER 1000L: - Weight (kg): 230 - Number of ports: 6 - Port size: 2", 1/2" - Size: 230 x 80.8 cm - Tank capacity (l): 1000 - Working pressure (bar): 11 - Wall thickness (mm): 4 - Diameter (mm): Ø 808 - Height (mm): 2300

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 100-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit is also equipped with a fixed-mounted water separator, which removes moisture from the compressed air and prevents the blasting media from clumping due to excessive humidity. For safe operation, our safety cut-off system is included. This system starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. The pressure blasting unit is delivered fully assembled, operational, and space-saving in a mesh box. Only the compressed air supply needs to be connected and the unit filled with blasting media. Transport can be carried out conveniently using a forklift or pallet truck. For protective clothing, spare parts, etc., a lockable aluminum storage box is installed. Scope of delivery includes: - SAPI pressure blasting unit "Mammut 100 L" - 1" pressure regulator, permanently installed - 1" water separator, permanently installed - SAPI safety cut-off system - Blasting media sieve - Cover - 10 m blasting hose ø 25x7 mm, fully assembled - Silicon carbide venturi long nozzle, available in 6 mm, 8 mm, or 10 mm diameter - RED 2 sandblasting helmet - Sandblasting overall (nylon/cotton) - 1 pair of leather blasting gloves - 10 m breathing air hose, fully assembled - SAF breathing air / activated carbon filter - Wear parts kit consisting of: - 100 tear-off visors for RED 2 Isdpfx Abjwc Ri Isxeic - 10 inner lenses for RED 2 - 1 blasting hose coupling 25x7 mm nylon - 2 rubber seals for blasting hose coupling - 1 nozzle holder 25x7 mm - Mesh box with blasting hose holder - Lockable aluminum box Technical specifications pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Rigid 1" piping (internal and external) - Rubber-coated metal cone with rubber seal - Large handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 100 l - Total height: 1,130 mm - Vessel diameter: 490 mm - Overall diameter: 900 mm - Weight: approx. 75 kg Mesh box dimensions: - Length: 1,460 mm - Width: 840 mm - Height: 1,400 mm - Total weight incl. all accessories: 260 kg