Nirox Multi-Thick-Ms1-Ch nakup rabljenega (26.196)

Stanje: rabljeno, For inquiries regarding the attachment, Mr. Herden will assist you (please call Tel.). Seppi M. MINI-BMS 105 / 5-10 t / Forestry Mulcher / CUT CONTROL / DEMO Unit / Rotation Motor / Year of Manufacture: 2023 / In stock & immediately available Price: €18,990.00 net / €22,598.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Suitable for mulching along riverbanks, in forests, and other hard-to-access areas - Mulches brushwood and shrubs up to 10 cm diameter - For excavators from 5-10 tons - Designed for mounting on various adapter plates - Drive unit suitable for hydraulic motor, dependent on carrier’s hydraulic flow - Indirect V-belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Full-length hinge along the entire hood - Front chain guard - Rear chain guard - Height-adjustable skid shoes, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts each) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement (min-max): 29 - 58 cm³ - Required hydraulic pressure (min-max): 150 - 250 bar - Required hydraulic flow rate (min-max): 60 – 130 l/min OPT372 hydraulic 190° rotation device OPT158 12V solenoid valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and assembly = €880.00 net We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. An autonomous hydraulic system is recommended for the drive. Three hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is also needed for the hydraulic hood. The device is supplied without hoses, couplings, or adapter plate. We are an official Seppi M. sales and service partner. We also represent the following brands: Westtech Woodcracker (sales and service), DMS (sales and service), Magni telehandlers (sales and service), JCB construction machinery (sales and service), Mercedes-Benz (service), Iveco (service), and, with 800 used vehicles, are one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range! Fgedpfx Ageymi Naetsg Subject to prior sale and errors. Internal No.: 170068 = More Information = Please contact Marius Herden for further details.

Stanje: novo, If you have any questions regarding the attachment, Mr. Herden will be happy to assist you by phone. SEppi M. MINI-BMS 105 / Forestry Mulcher / incl. Rotator Motor / MS08 / 5-10 t / CUT CONTROL / NEW / in stock & immediately available Price: €21,390.00 net / €25,454.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m Fgodjyltvuepfx Agtog - Mulching attachment for excavators - For mulching along riverbanks, in forests, and other hard-to-access areas - Shreds brush and wood up to 10 cm diameter - Suitable for excavators from 5-10 tons - Designed for mounting on various adapter plates - Drive designed for hydraulic motors, depending on your carrier’s hydraulic flow - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire length of the hood - Chain front guard - Chain rear guard - Height-adjustable, reinforced skid shoes with carbide wear plate - Colour: Red RAL3020 · Anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 – 45 cm³ and overpressure valve - Displacement (min-max): 22 – 45 cm³ - Required hydraulic pressure (min-max): 150 – 250 bar - Required hydraulic flow rate (min-max): 40 – 100 l/min OPT372 Hydraulic 190° rotator OPT158 Solenoid valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is also needed for the hydraulic hood. The device is supplied without hoses, connectors, or attachment plate. Mr. Herden is also available by phone for consultation. Financing offers available upon request. We are official sales and service partners for Seppi M., Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply you with the complete range of Seppi M. equipment! Errors and prior sale excepted! = Further Information = Please contact Marius Herden for further information.

Stanje: rabljeno, največja dovoljena obremenitev: 35.840 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 02/2026, skupna širina: 2.550 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Complete specification available upon request. Chassis: * Configuration for transporting containers: 45', 40'HC, 30', 20' center, 20' rear, 2x20', 40' ISO * Frame adapted for a 40' ISO container * Rear pneumatic extension with additional mechanical locking pin * Container Master 45' R2 * Extendable bumper * Steel underrun protection Axles and Suspension: * SAF disc brake axles, 3 x 9,000 kg, 22.5" INTRADISC KNORR clamps * Brake disc diameter: 430 mm * Rigid axles * Approx. 1,090 mm coupling height unladen * 1 lift axle Landing Gear: * JOST 2-speed landing legs Tyres/Rims: * BRIDGESTONE 385/55 R22.5 DURAVIS R002 3PMSF (B-B-70) * Rolling resistance: B, Wet grip: B, Rolling noise: 70dB * Without spare wheel * Steel rims 22.5-11.75 ET-120 * Nut protection caps Braking System/Pneumatics: * Steel air tank braking system as per manufacturer’s choice with Basic Modulator featuring RSS/RSP Electrics: Fodpfow Ak A Uex Agtsgg * Socket: 1x 15-pin and 2x 7-pin with EBS connection, without connecting cable to tractor unit Lighting: * Partial LED Aspöck-EUROPOINT III * LED license plate lighting * LED marker lights * LED side marker lamps Other Chassis Equipment: * Full-coverage mudguards * Splash protection behind the third axle * Full PVC mudguards * Without spare wheel carrier and spare wheel winch * Key for container lock * Frame adaptation for transport of ISO 40' containers (with flat floor, no tunnel) * 2 adapters and 2 spacer supports * Without toolbox Paintwork: * Chassis KTL coating * Chassis painted in RAL 7021 (black grey)

Stanje: rabljeno, prevoženi kilometri: 183.238 km, moč: 104 kW (141,40 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, konfiguracija osi: 4x2, medosna razdalja: 3.450 mm, prva registracija: 03/2021, kapaciteta rezervoarja za gorivo: 80 l, Izpusti CO₂: 274 g/km, emisijski razred: Euro 6, barva: bela, število sedežev: 2, število prejšnjih lastnikov: 3, Leto izdelave: 2021, Oprema: ABS, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni senzorji, računalnik na krovu, servovolan, sistem za imobilizacijo, General Information Number of doors: 6 Model range: June 2019 - June 2021 Cabin: standard (single cabin) Technical Information Torque: 350 Nm Number of cylinders: 4 Engine displacement: 2,287 cc Fodpfxjyahhbe Agtegg Transmission: 6-speed automatic Dimensions Length/Height: L2H2 Dimensions (L x W x H): 554 x 205 x 252 cm Weights Kerb weight: 2,098 kg Payload: 1,242 kg Gross vehicle weight (GVW): 3,340 kg Interior Interior: black Fuel Consumption Average fuel consumption: 8.7 l/100km Fuel consumption (urban): 8.9 l/100km Fuel consumption (extra-urban): 8 l/100km Maintenance, History and Condition APK (Periodic Technical Inspection): New inspection (TÜV) upon delivery Number of keys: 2 (1 remote control) Financial Information Ask about financial leasing options Product Safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional Options and Equipment = - Passenger bench seat - Car kit - Third brake light - Front electric windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Rear doors - Wooden interior lining - Height-adjustable driver's seat - Height-adjustable steering wheel - Load platform - Front center armrest - Multifunction steering wheel - Rear parking sensors - Radio - Reversing camera - Left side sliding door - Right side sliding door - Start/stop system - Immobiliser - Bluetooth phone - Partition wall

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Zum Verkauf stehen: Mehrere (6 Stück) Jakob Müller MVC 150 der ersten Generation: Fsdpfxov Hxlte Agtogg MVC 150 8/46mm Bj. 1988 88.60237 Nr. 309 MVC 150 8/46mm Bj. 1988 88.60085 Nr. 319 MVC 150 8/46mm Bj. 1988 88.60319 Nr. 332 MVC 150 10/36mm Bj. 1988 88.60041C Nr. 314 MVC 150 10/36mm Bj. 1988 88.60041B Nr. 313 MVC 150 6/66mm Bj. 1988 88.60000 Nr. 307 Baujahr: 1988 Zustand: gut laufend und komplett Preis: 3.900,- Euro

Stanje: rabljeno, Leto izdelave: 1991, Zum Verkauf stehen 10x Jakob Müller Frick CH MVC 150 Müdata 4 Etiketten-Webmaschinen. Verkauf ausschließlich als Komplett-Set für 50.000,- €. Einzelpreis pro Webmaschine: 5.000,- € Details der Maschinen: - 1989, 12/30mm, An: 89.30018 Müdata 4, Nr. 70 - 1990, 12/30mm, An: 90.30452 Müdata 4, Nr. 71 - 1990, 12/30mm, An: 90.30370 Müdata 4, Nr. 72 Fjdov T Nb Sjpfx Agtsgg - 1990, 8/46mm, An: 90.30337 Müdata 4, Nr. 325 - 1991, 12/30mm, An: 91.30247 Müdata 4, Nr. 73 - 1990, 7/57mm, An: 90.30166 Müdata 4, Nr. 76 - 1990, 7/57mm, An: 90.30461 Müdata 4, Nr. 77 - 1990, 9/36mm, An: 90.30371 Müdata 4, Nr. 78 - 1990, 9/36mm, An: 90.30080 Müdata 4, Nr. 79 - 1991, 7/57mm, An: 91.30312 Müdata 4, Nr. 80 Alle Webmaschinen sind in gutem Zustand und laufen einwandfrei.

Stanje: rabljeno, lastna masa: 6.100 kg, največja dovoljena obremenitev: 29.900 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2014, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, barva: modra, Leto izdelave: 2014, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, zavorni sistem na stisnjen zrak, German semi-trailer, single ownership, condition as shown in photos, trailer by Krone Fahrzeugbau, type SD, front and rear steering axle, loading area: length = 13,600 mm x width = 2,500 mm, high front wall, wooden floor, twist lock system, Multilock, stake pocket, stanchion depot under chassis, BPW Eco Plus axles, disc brakes, air suspension with lift/lower function, ABS/EBS, Jost landing gear, storage box, spring-loaded brake cylinder, GVW: 36,000 kg, unladen weight 6,100 kg, payload: 29,900 kg. If a new TÜV inspection is required, we will gladly provide you with an offer from one of our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new safety inspection (SP), and without new accident prevention regulation (UVV) inspection. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misconceptions about their condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Fjdpfxexb Dgnj Agtjgg Subject to change, prior sale, and errors.

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) Fsdpfx Agoy Auh Istsgg * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: > 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports Fgodpergzv Nefx Agtjg * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, The Multi-Fill MPFSH-075-01 depositor is an ideal solution for the precise dosing of various food products. Thanks to its versatile design, it can handle a wide range of products, such as cooked pasta, rice, vegetables, cut fruits, surimi, chilled salads, and even cooked meats. This machine stands out for its ability to accurately dispense products that are difficult to handle, while ensuring uniform distribution into different types of containers. Moreover, the machine is engineered for efficient operation, featuring optimized air and water consumption, which reduces operating costs while maintaining consistent performance. Its integration into a production line enhances productivity and guarantees high-quality results. Additionally, this robust machine is suitable for demanding industrial environments, providing a durable solution for food processing needs. In summary, the Multi-Fill MPFSH-075-01 depositor is an essential asset for businesses aiming to improve the efficiency of their dosing processes while ensuring consistent product quality. Technical specifications: Model: MPFSH-075-01 Fgedswf D Rwopfx Agtsg Brand: Multi-Fill Year of manufacture: 2006 Air consumption: 60 CPM > 80 PSI / 30-35 cubic ft/min / 5.5 bar / 51-60 Nm/hour Water consumption: 0.75–1 GAL/min / 2.8–3.8 litres/min Total required frequency with air vacuum: 0.45 kW Products dosed: cooked pasta, rice, cut vegetables and fruits, surimi, chilled salads in a variety of containers, cooked meats.

Stanje: zelo dobro (rabljeno), Dobro vzdrževan stroj, ki pripravlja tako mehki sladoled kot mlečne napitke. Velika kapaciteta. 4 okusi. Vodno hlajen, 3-fazni, 400 V. Sveže servisiran. Fgjdpfoyc Nprox Agtjg

Stanje: rabljeno, MULTI-HEAD TUBE CUTTING MACHINE TRA3000/7/7/CAR + RA1 Manufactured by MAIR SCOPE OF SUPPLY 1. Loading table equipped with: - Motorized sling bundle loader for complete bundle loading - Side chain conveyor for feeding tubes individually - Upper support with vertical adjustment (prevents dual loading when working with small diameters) - Length stop and tube loader 2. TRA3000 cutting machine with: - 7 independent cutting heads - All cutting heads are independently liftable - Linear guideway with scale for cutting head positioning - Centralized tube transport system with produciton cycle adjustment 3. Individual collecting cradle RA1, including: - Independent cradles for collecting cut tubes - Lateral cradle dividers to adapt cradle length to tube length - Motorized endless slings for collecting soft tubes 4. Main electrical cabinet and operator control panel 5. Safety barriers around the machine, light curtains, and emergency line. Note: The owner installed safety barriers to ensure the machine complies with "safety conformity" standards. TECHNICAL SPECIFICATIONS Manufacturer: MAIR RESEARCH Model: TRA 3000/7/7/CAR + RA1 Annual maintenance: performed by MAIR Spain Maximum tube entry length: 7000 mm Bundle loader: 3 tons Maximum loading capacity: 3000 kg Round tubes (external Ø): 12-60 mm Fjdpfx Agsymax Ejtegg Square tubes (height x width): 12x12-50x50 mm (see note) Rectangular tubes (height x width): 12x16-60x40 mm (see note) Min.-max. thickness: 0.8 - 4.0 mm (depending on yield strength) Cutting lengths: 330-6900 mm Maximum straightness tolerance: 1 mm/m Number of cutting heads: 7 Motor power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380/50 V/Hz, 3 phases Compressed air: Must be supplied filtered and lubricated at 6 bar. Total installed power: Approx. 21kW – 50Amp

Stanje: rabljeno, MULTI-HEAD PIPE CUTTING MACHINE TRA3000/7/8, manufactured by MAIR Scope of supply: 1. Loading table with: - Motorized sling loader for loading a complete bundle - Side chain conveyor for feeding tubes one by one - Upper arm with vertical adjustment (to prevent loading two tubes at once when working with small diameters) - Longitudinal stop and tube loader 2. TRA3000 Cutting Machine: - 7 independent cutting heads - All heads can be raised independently - Linear guide with scale for positioning the cutting heads - Centralized tube transport system with production cycle adjustment 3. Double RA3 collection cradle, featuring: - Independent cradles for collecting cut tubes - Side spacers in the cradles to adjust the length to the tube - Endless motorized slings for gentle tube collection Note: The double cradle system allows packaging and strapping in cradle 1 while production continues, eliminating the need to stop the machine. Fedpfx Agjymaw Uotegg 4. Main electrical cabinet and control panel. NOTE: - This machine has operated very few hours. - Mechanical condition is very good. - Only cleaning and repainting are required to be “like new.” Max. input tube length: 8,000 mm Bundle loader capacity: 3 tons Max. loading capacity: 3,000 kg Round tubes (outer Ø): 12–60 mm Square tubes (HxW): 12x12–40x40 mm Rectangular tubes (HxW): 12x16–50x30 mm Min.–max. wall thickness: 0.8–3.0 mm (depending on yield strength) Cutting lengths: 330–7,900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motor power: 2.2 kW Cutting disc diameter: 300 mm

Stanje: rabljeno, Večglava rezalna linija TRA2000/7/7, proizvajalca MAIR Vključuje: 1) Paketni podajalnik z dozirnikom cev/cev 2) Večglavni rezalni stroj s 7 rezalnimi glavami 3) Večkratno izhodno žlebišče 4) Električna upravljalna omara z napajanjem in krmiljenjem Fgedpfx Agjymaypstjg Po naročilu je možno izdelati tudi: 5) Izvozna žlebišče z dvojnim izhodom 6) Nov električni upravljalni panel s frekvenčnimi pretvorniki za rezalne motorje 7) Pokrov za zaščito pred hrupom in za varnost Največja dolžina cevi: 7.500 mm Največja nosilnost: 2.000 kg Okrogle cevi (zunanji premer): 12 - 50 mm Kvadratne cevi (višina x širina): 12×12 – 40×40 mm Pravokotne cevi (višina x širina): 12×16 – 50×30 mm Največja debelina: 2,5 mm Dolžina cevi za rezanje: 330 - 7.400 mm Število rezalnih glav: 7

Stanje: novo, moč: 250 kW (339,91 KM), Leto izdelave: 2025, Der Mehrzylinder-Hydraulik-Kegelbrecher ist eine fortschrittliche Art von Kegelbrecher, die für höhere Produktivität und bessere Brechleistung im Vergleich zu herkömmlichen Einzylinder-Kegelbrechern entwickelt wurde. Nachfolgend finden Sie wichtige Merkmale und Informationen zu Mehrzylinder-Hydraulik-Kegelbrechern: 1. Aufbau und Funktionsweise: - Mehrzylinder-Hydraulik-Kegelbrecher verfügen typischerweise über drei oder mehr Zylinder. - Die Brechkammer wird zwischen dem festen Außentrichter (Mantel) und dem beweglichen Innentrichter (Konkave) gebildet. - Die Zylinder steuern die Bewegung des Innentrichters und ermöglichen so einen hocheffizienten und gleichmäßigen Brechvorgang. 2. Hydrauliksystem: - Jeder Zylinder ist mit einem eigenen Hydrauliksystem ausgestattet, wodurch eine unabhängige Steuerung der Brechkammer möglich ist. - Das Hydrauliksystem dient zur Einstellung der Austragsöffnung, zur Fremdkörperfreigabe (Schutz vor Überlast) sowie als Überlastschutz. 3. Einstellbare Austragsöffnung: - Die Austragsöffnung kann einfach angepasst werden, um die Korn­größe des Endprodukts zu steuern. 4. Automatisierungs- und Steuerungssystem: - Mehrzylinder-Hydraulik-Kegelbrecher verfügen häufig über moderne Automatisierungs- und Steuerungssysteme. - Diese können speicherprogrammierbare Steuerungen (SPS/PLCs) und Bedienerschnittstellen (HMIs) für einen komfortablen Betrieb und Überwachung umfassen. 5. Anwendung: - Mehrzylinder-Hydraulik-Kegelbrecher eignen sich zum Brechen harter und mittelharter Materialien in Branchen wie Bergbau, Metallurgie, Baustoffindustrie und Straßenbau. - Besonders effektiv sind sie beim Zerkleinern von Materialien mit hoher Härte und abrasivem Index. 6. Vorteile: - Höhere Brechleistung und Durchsatz im Vergleich zu Einzylinder-Kegelbrechern. Fsdpfx Aoq Nd Rbegtjgg - Bessere Kornform des Endprodukts durch gleichmäßigen Brechvorgang. - Verbesserte Zuverlässigkeit und Wartungsfreundlichkeit. - Erhöhte Sicherheit durch die hydraulische Überlastsicherung. 7. Nachteile: - Möglicherweise höhere Anschaffungskosten als Einzylinder-Kegelbrecher. - Wartung und Reparatur sind unter Umständen aufwendiger. 8. Modelle und Spezifikationen: - Mehrzylinder-Hydraulik-Kegelbrecher sind in verschiedenen Modellen wie der HPT-Serie, der HP-Serie und weiteren mit unterschiedlichen technischen Spezifikationen verfügbar. 9. Hersteller: - Zahlreiche Hersteller produzieren Mehrzylinder-Hydraulik-Kegelbrecher. Namhafte Hersteller bieten dabei in der Regel zuverlässige und hochwertige Maschinen an. Bei der Auswahl eines Mehrzylinder-Hydraulik-Kegelbrechers sollten Sie Ihren spezifischen Bedarf prüfen, verschiedene Modelle hinsichtlich Ausstattung, Kapazität, Aufgabegröße und gewünschter Endkorngröße vergleichen und auf den Ruf sowie auf Erfahrungsberichte zum Hersteller und konkreten Modell achten.

Stanje: rabljeno, težka debelinka Paoloni S 515 Širina skobljanja 510 mm Višina skobljanja 250 mm električna nastavitev višine z natančnostjo desetink za natančno pozicioniranje 4-rezilni varnostni skobeljni valj Fjdpfx Aoy A Nruegtegg Miza vodena na štirih mestih Glavni motor 4 kW Podajanje 5, 8, 12,5, 19,5 m/min Jekleni izhodni valj Segmentiran pritiskalni nosilec iz polnega aluminija Valj pod mizo Letnik 1997 CE-skladnost Stroj JE DELUJOČ Na zalogi v Liebochu

Stanje: zelo dobro (rabljeno), Planing width: 520 mm Min./Max. working height: 3 - 240 mm Motor power: 5.5 kW, 400 V, 50 Hz Cutter shaft speed: 4500 rpm Cutter shaft diameter: 120 mm Planer knives: 4 pcs Thicknessing table dimensions: 520 x 850 mm Feed speed: 6.5 / 10 / 13 / 17 m/min Extraction port diameter: 150 mm Features: - Electric height adjustment - Hand wheel for fine adjustment of thicknessing table height - Helical-toothed steel infeed roller - Sectional pressure bar - 2 steel outfeed rollers - Under-table roller - Undervoltage release - Emergency stop switch - Knife setting gauge - Test report to confirm compliance with Section 4 of the AM-VO NEW drive belts Fgjdpfx Aoy Egmujgtjg NEW ball bearings NEW planer knives Approx. dimensions (L x W x H): 1120 x 990 x 1000 mm Approx. weight: 600 kg Note on used machinery: • Subject to errors in technical details and prior sale. • Prices quoted are ex works, free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Stroj za obdelavo lesa HOFMANN, tip D 636 – nov TERSA nožasta gred s 4 noži Motor 5,5 kW, 400 V, 50 Hz, elektronska naprava za zagon in zaviranje Moderna nadzorna plošča, ergonomska zasnova. Električna nastavitev mize za obdelavo z gumbi za nastavitev v hitrem ali počasnem načinu, ter nastavitev z natančnostjo 1/10 mm, integriran števec delovnih ur. Miza za obdelavo je nameščena na štirih podpornih vretenih in ima štiri vodila. Gumijast valj za vnos in 2 gumijasta valja za iznos. Segmentiran pritiskovalni nosilec, vrteči gumb za prednapenjanje nosilca za iznos. Priključek za sesanje Ø 160 mm, na levi strani. Integriran predal za shranjevanje orodja. vključno z naslednjimi dodatnimi možnostmi: Fgedpfezylvuex Agtjg - Moč motorja 7,5 kW namesto 5,5 kW - Brezstopenjska nastavitev podajanja 4–22 m/min namesto 2 nastavljivih hitrosti podajanja - Sistem za pozicioniranje za model D 636 z 250 pomnilniškimi mesti

Stanje: novo, Leto izdelave: 2026, HOFMANN, tip AD 635, nova strojna oprema za obdelavo in planiranje, - TERSA nožna gred s 4 noži, - nastavitev debeline plošče s tipkami za nastavitev v hitrem ali počasnem načinu, ter nastavitev z natančnostjo 1/10 mm, - vgrajen števec delovnih ur, - plošča za obdelavo debeline, nameščena na 4 podpornih vretenih in s 4-kratno vodilno strukturo, - gumi valj za vstop in gumi valj za izstop, vključno z naslednjimi dodatnimi možnostmi: - moč motorja 7,5 kW, - brezstopenjski nadzor podajanja 4–22 m/min, namesto dveh hitrosti podajanja, - nadzorni sistem za pozicioniranje za model AD 635, vključno z nadzorom senzorjev prek optične pregrade, - dodatna delovna miza 630 mm, D = 1000 mm, - teleskopska potisna palica. Fjdpfxjzyf Tyo Agtjgg

Stanje: rabljeno, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, Stroj za obrobno lepljenje HOLZ-HER SPRINT 1329 Multi z motorično pritiskalno ploščo PUR in EVA lepilo (do 60 mm) z NOVIM GLU JET GJ725 PUR PRO, vključno z vakuumsko črpalko motorična vodilna letva za vnos vodilo za ozke dele rezanje za izravnavo spojev IntelliSet – korekcija orodja fa.s.t. – nastavitev med premori + prikaz ostankov dolžine robnega traku iTronic – nadzor pritiska in količine lepila avtomatsko mazanje verige drugi izmet obdelovanca + zračni blazinni sistem na območju vhoda popolna motorizirana oprema vseh agregatov multifunkcijsko rezanje – radij 1,3 mm (2-krat) in 2 mm (2-krat) + paket za gnezdenje, vertikalno od spodaj razpršilna naprava + agregat za nanašanje premazov z teksturno obdelavo za običajno uporabo in strukturirane površine itd. Stroj je trenutno v obdelavi v tovarni v Voitsbergu / Avstriji. Predvideno dokončanje: približno oktober/november 2026. Dostava, montaža in usposabljanje za upravljanje stroja je možno urediti neposredno pri nas, po dogovoru. Stroj je trenutno v našem skladišču v Gratweinu / Avstriji. V primeru razlik med nemško različico in različico v drugem jeziku je merodajna izključno nemška različica. Fgodjzx Ennepfx Agtog Naše splošne pogoje najdete na naši spletni strani na holzher.de/de/agb.

Stanje: kot nova (razstavni stroj), Šifra: N0485 Znamka: FELDER – AVstrija Model: D 951 – v skladu s standardom CE Fgsdpfx Agezqdz Rsteg Avtomatski stroj za planiranje debeline – v skladu s standardom CE Tehnični podatki: Gred s 4 zamenljivimi rezili Tersa Premer 120 mm Delovna širina 504 mm Delovna višina 3/254 mm Dolžina mize 900 mm Maksimalna odstranitev žagovine 8 mm Avtomatski dvig mize Elektronski prikaz globine Spremenljiva hitrost podajanja od 4 do 16 metrov/min 2 valja na mizi Moč motorja 10 KM Premer priključka za odsesavanje prahu 140 mm Zunanje mere (mm): 1050 x 1050 x 1100 (višina) Teža (kg): 650

Stanje: kot nova (razstavni stroj), Koda: N0593 Fgodjzqd D Ejpfx Agtog Znamka: FELDER – AVstrija Model: D 963 – v skladu s standardom CE Avtomatski stroj za obdelavo površin z nizko raven hrupa, opremljen z vretenom Silent Power in sistemom za natančno pozicioniranje Digi Drive – v skladu s standardom CE Delovna širina 630 mm Delovna višina 3–300 mm Maksimalna odstranitev žagovine 8 mm Nastavljiva hitrost podajanja od 4 do 16 m/min Vreteno stroja za obdelavo površin z spiralnimi rezili Silent Power in obojestransko uporabnimi rezili iz trde kovine (HM) Avtomatski sistem za natančno pozicioniranje Digi Drive

Stanje: rabljeno, Leto izdelave: 1991, Širina stroja za ravnanje: 530 mm Višina stroja za ravnanje: 240 mm Minimalna višina stroja za ravnanje: 1 mm Maksimalna odstranitev materiala: 8 mm Premer noževe osi: 120 mm Število vrtljajev: 5000 vrt/min Noži: 4 kos Motor: 4 kW Hitrost podajanja: 5, 7,5, 10, 15 m/min Fgodpfxjzi Augo Agteg Dimenzije mize: 960 x 530 mm Priključek za odsesavanje: 140 mm Teža: približno 970 kg Lokacija skladiščenja: stranka

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, višina obdelovanca (maks.): 60 mm, največja debelina roba: 15 mm, Holz-Her robna lepilka LUMINA 1380 Multi PUR & EVA lepilo (do 60 mm) + NIR agregat / laserski robovi do 45 mm, kot menjalna postaja Predrezkanje IntelliSet – korekcija orodja fa.s.t. – nastavljanje v prekinitvi iTronic – nadzor pritiska in količine lepila Popolna motorizacija vseh agregatov Fgjdpfxsx E A Dij Agtjg Multifunkcijsko rezkanje – radij 1,3 mm (2x) in 2 mm (2x) Razpršilne naprave in več... Stroj je trenutno obnovljen v tovarni v Voitsbergu, Avstrija. Dostavo, montažo in uvajanje v delo s strojem lahko izvedemo neposredno mi za doplačilo. Stroj se trenutno nahaja v našem skladišču za odpremo v Gratweinu, Avstrija. V primeru neskladja med nemškim in prevedenim besedilom velja izključno nemška verzija. Naše splošne pogoje najdete na naši spletni strani holzher.de/de/agb.

Stanje: rabljeno, številka stroja/vozila: 008441, Maksimalna širina plošče: 1100 mm Maksimalna dolžina plošče: 5700 mm Maksimalna hitrost podajanja: 30 m/min Število valjev: 1 Moč žaginega motorja: 90 kW Fedpjyz Slbsfx Agtogg