Lindner T 1500 nakup rabljenega (77.784)

Leto izdelave: 2025, stanje: novo, - Z integriranim odsesovanjem in pnevmatskim čiščenjem. - Na voljo so različne delovne površine! (les, rešetka, perforirana plošča) - Premično na vrtljivih kolesih Ndsdpfx Alsxzt Uho Djb - Pripravljeno za priklop

Stanje: generalkompletno obnovljen (rabljeno), 1 overhauled table polishing machine / table polishing automaton, manufacturer HAU, model T1500 (max. part length 1500 mm), with 1 polishing station model PES/3 and one control cabinet. The table was disassembled, inspected for damage (defective parts were replaced), cleaned and repainted. The guide shafts were newly mounted and a new gearbox installed. + 1 polishing station, model PES/3, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Disc width max. 400 mm, max. disc diameter 400 mm. The station was completely dismantled, inspected for damage (defective parts replaced), cleaned and repainted. The polishing shaft was completely relubricated, including slide bush bearing. The oscillation unit was also newly sealed. New motor, pulleys and drive belts installed. Ndjdpfx Alsw Au A Ej Dsb + 1 new control cabinet for operating the above-described system. Table speed and polishing wheel speed can be regulated via frequency inverter.

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to learn more! The offer applies to the basic version of the machine. All special equipment and their prices can be found on our website. Handheld Laser Welding Machine LWH-1500-N RayTools Scope of delivery: - Laser welding unit with cooling system - Welding gun with adjustable focal length and accessory kit - Fiber laser source from MAX Photonics - Automatic wire feeder - Hose and cable set - Starter package with nozzles and protective lenses Technical Specifications - Laser power: 1500 W - Laser wavelength: 1064 nm - Welding speed: up to 120 mm/s - Power supply: 230 Hz - Dimensions (with welding gun holder): 630x1300x1500 mm Included in the price: One-day operator training and machine commissioning - Day 1 (up to 8 hours): Commissioning and Training Operation Thanks to the revolutionary welding system, any operator can achieve quality results after a short training session. The cable allows the welder to work freely at multiple points without moving the unit. The small heat-affected zone prevents excessive distortion. The weld seam is applied quickly and efficiently, resulting in a correct and robust weld joint. Intended Use This laser welding machine is designed for professional use in businesses that require high-quality and aesthetically pleasing weld seams. Nodpfxsthigro Al Dsdb Laser source specifications: 1000 W - Carbon steel: up to 3 mm - Stainless steel: up to 3 mm - Aluminium: 2 mm - Brass: 0.8–1 mm 1500 W - Carbon steel: up to 4 mm - Stainless steel: up to 4 mm - Aluminium: 3 mm - Brass: 1 mm 2000 W - Carbon steel: up to 5 mm - Stainless steel: up to 5 mm - Aluminium: 4 mm - Brass: 2 mm 3000 W - Carbon steel: up to 8 mm - Stainless steel: up to 8 mm - Aluminium: 7 mm Design The welding gun cable provides extensive freedom of movement, making it easier to weld in various positions. The integrated controller with a large, clear display is intuitive to operate. The device is equipped with a powerful cooling system, enabling operation under demanding conditions in three-shift operation. Operating Principle The laser welding machine melts the welding wire and the edges of the workpieces to be joined using laser heat. The beam is focused and directed at the welding wire, which is fed by the wire feeder, and at the contact point. When the trigger is pressed, the welding gun must be moved along the weld seam in accordance with the wire feed speed. Constant working temperatures for the beam source and welding gun are maintained by a water-cooled circulation system. Beam power and cooling are controlled via a controller that adjusts the settings according to the user's parameters.

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200 mm, hose length: 2500 mm, machine dimensions (L/W/H): approx. 1500 mm / 1000 mm / 1800 mm, weight: approx. 650 kg. Documentation is available. Inspection on site is possible. Ndjdowfg E Dopfx Al Dsb

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Naprodaj sta 2 sušilni napravi Koch CKT 1500. Ena naprava iz leta 1999 s 4 sušilnimi posodami (3x800l/1x1200l), druga naprava iz leta 2003 s sušilnimi posodami (3x100l, 3x200l, 3x300l, 1x400l). Sušilniki so popolnoma funkcionalni in še vedno v uporabi, možno jih je ogledati do sredine septembra. Prodaja skupaj z vso napeljavo, brez transportne opreme Koch. Cena po ponudbi. Nodew Ry Axjpfx Al Dsdb

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8843, trajanje garancije: 12 meseci, Lastnosti: - primerna rezalna enota glede na uporabo - izpustni trak v ojačani izvedbi - priprava za montažo držala za magnetni separator - ravna ploščata podlaga na goseničnem podvoju Ndsdpszkha Dofx Al Dob - regulacija hitrosti izpustnega traku - odlaganje prahu

Stanje: novo, Bernardo Universal Lathe Smart 410 x 1500 Pro Technical Specifications Centre distance: 1500 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-6 Speed range (16 steps): 45 – 1800 rpm Longitudinal feed range (17 steps): 0.05 – 1.7 mm/rev Cross feed range (17 steps): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Imperial threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 3.0 / 4.5 kW Machine dimensions (L x W x H): 2570 x 900 x 1600 mm Weight approx.: 1400 kg Product Features • Prism bed made of cast iron, induction hardened and precision ground • Electromechanical foot brake to minimise auxiliary times Ndedpexl Dwujfx Al Djb • Central, user-friendly control for feeds and threads using feed and leadscrew • Modern precision headstock bearing with angular contact ball bearings • Large, hardened, precision-ground gears • Hardened and ground gears and shafts, also in the feed gearbox • Easy and precise adjustment of speeds and feeds • Adjustable tailstock for taper turning, handwheel with fine scale (0.02 mm) • Removable bridge allows machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D6 • Faceplate 350 mm • Fixed steady rest – max. pass-through diameter 135 mm • Travelling steady rest – max. pass-through diameter 65 mm • Coolant system • Four-way toolpost • Safety guard at toolpost • Micrometric longitudinal stop • Slip clutch • Turret stop with fine adjustment • Thread dial indicator • Motor with electromagnetic brake, CE compliant • Foot pedal with brake function, CE compliant • Initial fill with Shell Tellus 46 • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard • Service tools

Stanje: rabljeno, Leto izdelave: 2007, Premer vrtenja nad ležiščem 670 mm Premer vrtenja nad sani postelje 490 mm maks. premer struženja 490 mm Krmiljenje SIEMENS - 840 D Glavna vretena odprtina 115 mm Zunanji premer vretena na sprednjem ležaju 160 mm CNC stružno in rezkalno središče | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 z revolverjem za pogonska orodja ter opremljen s konjičkom in vpenjalno pripravo. Dodatna oprema: - centrirne konice, - komplet čeljusti, - prijemalne čeljusti, - 3-čeljustno vpenjalo, Video stroja iz tovarniške lokacije vam z veseljem pošljemo na zahtevo. Njdpfx Asxcbktel Dedb Stroj je v dobro vzdrževanem stanju. Za dodatne tehnične podatke si oglejte ponudbo.

Stanje: dober (rabljeno), prevoženi kilometri: 468.653 km, moč: 180 kW (244,73 KM), prva registracija: 05/2019, vrsta goriva: dizel, velikost pnevmatike: 265/70 R19,5, konfiguracija osi: 4x2, gorivo: dizel, barva: oranžna, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, dovoljena osna obremenitev (os 1): 4.480 kg, dovoljena osna obremenitev (os 2): 8.480 kg, dolžina tovornega prostora: 9.460 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 2.170 mm, Leto izdelave: 2019, Oprema: ABS, centralno zaklepanje, dvižna zadnja plošča, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, spojler, tempomat, zapora diferenciala, = Dodatne možnosti in oprema = - Zadnji spojler - Omejnik hitrosti - Radio - Rezervno kolo - Kamera za vzvratno vožnjo - Stranska vrata - Zaščita pred soncem = Opombe = Zadnja dvižna platforma Dhollandia DHLM.30, 1500 kg Dolžina tovornega prostora: 225 cm Notranje dimenzije tovornega prostora: D 946 x Š 243 x V 217 Kamera za vzvratno vožnjo Tempomat Klimatska naprava Sončna zaščita Rezervno kolo Ndjdpfxeznwnro Al Dsb = Dodatne informacije = Splošne informacije Letnik: 2026 Registrska tablica: 74-BNJ-6 Tehnične informacije Število valjev: 4 Prostornina motorja: 5.132 cm³ Konfiguracija osi Velikost pnevmatik: 265/70 R19,5 Proizvajalec osi: Anders Zavore: diskovne zavore Prednja os: maks. obremenitev osi: 4480 kg; krmilna; profil pnevmatik levo: 60 %; profil pnevmatik desno: 60 %; vzmetenje: listnato vzmetenje Zadnja os: dvojne pnevmatike; blokada diferenciala; maks. obremenitev osi: 8480 kg; profil pnevmatik levo notranji: 55 %; profil pnevmatik levo zunanji: 55 %; profil pnevmatik desno notranji: 55 %; profil pnevmatik desno zunanji: 55 %; vzmetenje: zračno vzmetenje Teže Lastna teža: 8.030 kg Nosilnost: 3.960 kg Maksimalna dovoljena masa: 11.990 kg Funkcionalnost Dvižna platforma: Dhollandia DHLM.30, zadnja dvižna platforma, 1500 kg Notranjost Notranjost: siva Vzdrževanje Tehnični pregled (APK): veljaven do 06.2027 Varnost izdelka Proizvajalec: Nijwa Used Trucks Vormerij 12 7621HL BORNE, Nizozemska

Leto izdelave: 2009, stanje: dober (rabljeno), številka stroja/vozila: 4495678, Offer 18336 Portable TIG-DC welding machine on transport trolley Technical Data: - TIG – DC + electrode welding - Welding current continuously adjustable for TIG welding from 5 A - 10.0 V up to 150 A - 22 V 35% duty cycle 100 A 100% duty cycle - Power supply 220 V / 50 Hz 15 A - Equipped with: - 2-stroke / 4-stroke function Nodpfjhq T N Dex Al Djdb - HF (high-frequency) ignition - Adjustable welding current run-down - Pre-gas and post-gas flow control - 4.5 m torch package, lightweight version - Ground cable - Pressure regulator - Space requirement: approx. W 200 x H 300 x D 500 mm - Weight: approx. 10 kg - Transport trolley with gas bottle holder: W 550 x H 900 x D 560 mm - Weight transport trolley: approx. 10 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8673 0023, vpenjalna sila: 15.000 kN, premer vijaka: 145 mm, tlak vbrizgavanja: 1.454 letvica, širina plošče: 1.880 mm, višina plošče: 2.150 mm, Regularly serviced machine – see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting platen dimensions (H × V): 2,150 mm × 1,880 mm Clear distance between tie-bars (H × V): 1,500 mm × 1,250 mm Min./Max. mould height: 700 mm – 1,400 mm Maximum opening stroke: 2,900 mm Control: DIAS Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Pump motor rated power: 165 kW Heating capacity: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 kg Dimensions (L × W × H): 14.4 m × 3.4 m × 2.9 m Electrical connection Main supply: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and barrel 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 replaced Ndedpfx Asy T Hy Dsl Djb 2017: Injection cylinder BS piston rod replaced with seals 2017: Circulation pump for oil cooler replaced 2017: Teachbox replaced (robot) 2018: Pumps P1 + P3 replaced (at 65,800 h) 2018: Hydraulic oil changed 2019: Injection valve replaced 2019: Dosing inverter overhauled by Eichler 2021: Motor P1 replaced 2022: New RSP installed EQUIPMENT - Wittmann W 753 robot – 2008 - Safety cage and conveyor belt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NTX26200912, stružna dolžina: 1.530 mm, premer struženja: 670 mm, največja hitrost vretena: 12.000 obr/min, potovalna razdalja osi X: 675 mm, pomik osi Y: 300 mm, pomik po osi Z: 40 mm, največja hitrost vrtenja: 4.000 obr/min, število mest v zalogovniku orodij: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with a shortest installation length of 350 mm Machining option: Complete 6-sided machining thanks to a high-performance counter spindle TECHNICAL DETAILS Nedpfxoyap Shj Al Djdb X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining envelope: Ø 670 mm x 1,530 mm Control system Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: Standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Counter spindle chuck: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with safety cover for main and counter spindle Travel control: Automatic stroke control of the clamping cylinder for main and counter spindle Turn-mill Spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool interface: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for bolt-on tool holders Milling performance: 6,000 rpm, 40 Nm (Turret 2, FANUC) Tool magazine Capacity: 76 tools Tool interface: CAPTO C6 Measuring & Monitoring Tool presetting: Manual tool presetter for main and counter spindle, removable (standard) Position measuring system: Direct measurement system in the X, Y, and Z axes of the turn-mill spindle Sensor system: Spindle sensor measuring system with wireless signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feeder (LNS, IRCO, IEMCA, Edge Technologies, multi) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Coolant & Chip Disposal Chip conveyor: Right discharge, hinge-type belt + drum filter Coolant: Use of water-soluble coolant (emulsion) Pressure: High-pressure coolant system, 70 bar Coolant supply: Through the spindle for tool spindle and lower turret Filtration unit: Knoll/Interlit Compressed air system Blow-off system: For chucks on main and counter spindle Oil mist system Oil mist separator: Extraction port Ø 200 mm, AFS 1600 Filter & Cooling System Filtration unit: INTERLIT TMF300/980 compact filtration unit, 70 bar Additional pressure: 15 bar for turret II with lift pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Arburg 520H 1500-800 e² / Hybrid Injection Moulding Machine / Production Line with Side-mounted Arburg Multilift H Robot Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 cc Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA – Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-efficient, and very quiet Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened – bimetallic Main motor: servo motor driven via frequency inverter – energy saving Injection unit driven by servo motor, controlled via inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for fast operation) Centralized lubrication Automatic mold height adjustment Kistler sensor – mold pressure regulation The injection moulding machine was operated in a "clean room", equipped with additional protective measures against contamination and two vapor absorbers Side-mounted Arburg Multilift H robot Year of manufacture: 2013 5-axis robot: Z-axis servo-driven (electric); X, Y, and B axes (rotation) pneumatic Safety package for the robot Robot with adapter, conveyor belt with electric height adjustment, safety housing Purchase of robot and conveyor belt at additional cost Nsdpszy I Nqofx Al Djdb Dimensions: Weight: 6680 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical trials at our facility in Łódź. Price: On request

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 24075022, skupna masa: 560 kg, dvižna moč: 1.500 kg/m, širina mize: 229 mm, vrsta nastavitve višine: hidravlični, pritisk: 75 letvica, Na prodaj je visokokakovostna paletna dvižna miza proizvajalca Translyft. Stanje: kot nova, neuporabljena Tehnični podatki: -Proizvajalec: Translyft -Model: TSL 1500-1000 SP -Leto izdelave: 2024 -Nosilnost: 1.500 kg -Dvižna miza -Električni priključek: 3x400 V / 50 Hz -Moč motorja: 0,75 kW -Zaščita: IP54 -Delovni tlak: 75 bar -Lastna teža: 560 kg -Mere dvižnega ogrodja: širina max. 229 cm min. 127 cm, globina 110 cm -Skladno s CE Nodpfx Alezdan Ie Dedb Stanje: Kot nova, tehnično brezhibna. Dvižna miza je namenjena industrijski uporabi in je robustna za vsakodnevno delo. Idealna za proizvodnjo, skladišče, delavnico ali odpremni prostor. Posebnosti: -Visoka nosilnost 1,5 tone -Robustna industrijska izvedba -Kakovosten izdelek »Made in Denmark« -Leto izdelave 2024 – aktualni model -Takoj pripravljena za uporabo -Cena z DDV / obračunljiv DDV Iskalni pojmi: dvižna miza, škarjasta dvižna miza, dvižna ploščad, tovorna dvižna miza, hidravlična dvižna miza, industrijska dvižna miza, 1500 kg, Translyft, dvižna miza, manipulacija z materialom.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Brewery fermenter in good condition, 1500 hl capacity, 2 units available. Ndedpswr Ew Eefx Al Deb

Stanje: rabljeno, prevoženi kilometri: 577.156 km, moč: 240 kW (326,31 KM), prva registracija: 07/2016, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 02/2025, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.600 mm, Oprema: ABS, dvižna zadnja plošča, filter saj, klimatska naprava, Mercedes Benz Antos 1833 4x2 BL Ndedpfx Alsvm Nc Aj Dsb Enhanced engine brake Dautel tail lift DL 1500 S Sliding tarpaulin on both sides (left and right) Trailer load capacity: 18,000 kg Front axle: 355/50 R 22.5 Rear axle: 295/60 R 22.5 All information without guarantee - Subject to prior sale

Stanje: rabljeno, Longitudinal Slitting Line 1500 x 8, manufactured by GUIDA Line Composition: Ndodpsymciasfx Al Deb 1. Coil loading car 2. Decoiler with sliding base and single expanding mandrel 3. Pressure arm 4. Telescopic feed table with edge trimmer and deflector roller 5. Entry pinch roller 6. Shear 7. Tilting table 8. Mechanical centering device 9. Tensioning rolls 10. Longitudinal slitting shear 11. Loop pit equipment (infeed and outfeed supports + connecting tables) 12. Felt press 13. Deflector rollers 14. Tilting pivot table 15. Recoiler with single expanding mandrel 16. Separator arm 17. Electrical system 18. Hydraulic system 19. Safety fencing 20. Various tools and accessories 21. Spare parts Material to be processed: Hot-rolled carbon steel Yield strength: 400 N/mm² Maximum coil width: 1,500 mm Coil weight: 20 tons Coil inner diameter intake: 500/600 mm, 601+ with steel spacers for larger diameter Coil outside diameter intake/outfeed: 1,700 mm Slitting mandrel diameter: 220 mm Blade diameter: 355 mm Line speed: 50/25 m/min with manual speed change Direction of operation: Left to right Electrical supply voltage: 380V / 50 Hz Thickness: 1–8 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, skupna masa: 368 kg, skupna višina: 900 mm, skupna dolžina: 3.070 mm, skupna širina: 820 mm, nosilnost: 1.500 kg, Vitlo z rešetkastim drogom Proizvajalec: Manitou Tip: PT 1500 Leto izdelave: 2021 Višina (mm): 900 Ndjdpfx Aoya Ixysl Deb Dolžina (mm): 3.070 Nosilnost (kg): 1.500 Teža (kg): 368 Širina (mm): 820

Stanje: novo, Bernardo Universal Lathe Titan 560 x 1500 Pro Vario Technical Specifications Centre Distance: 1500 mm Centre Height: 280 mm Swing Diameter over Bed: 560 mm Swing Diameter over Gap: 785 mm Swing Diameter over Cross Slide: 350 mm Bed Width: 350 mm Spindle Bore: 105 mm Spindle Mount: DIN 55029, D1 – 8 Speed Range: 25 – 220 / 220 – 1500 rpm Longitudinal Feed Range (42): 0.055 – 3.061 mm/rev Cross Feed Range (42): 0.025 – 1.384 mm/rev Metric Threads (41): 0.1 – 14 mm Inch Threads (60): 2 – 112 TPI Tailstock Quill Diameter: 75 mm Tailstock Quill Travel: 185 mm Tailstock Quill Taper: MT 5 Motor Power: 7.5 kW (10.0 HP) Machine Dimensions - Length: 2840 mm Njdpfexl Tcyex Al Dsdb Width x Height: 1150 x 1610 mm Weight: approx. 2,420 kg Features • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Stepless speed control, set speed displayed digitally • Versatile applications in general engineering, production, single-part manufacturing, etc. • Removable gap bridge enables machining of large diameter workpieces • Standard with rapid traverse in longitudinal and cross for reduced secondary times • Modern main spindle bearing with precision angular contact ball bearings • Machine bed cast in one piece – extremely torsion-resistant and low-vibration for precise turning • Tailstock can be offset for taper turning operations • Central lubrication for bed slide Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Fixed steady rest – max. passage diameter 180 mm • Travelling steady rest – max. passage diameter 120 mm • Foot pedal with CE-compliant brake function • Safety guard for quick-change toolpost • LED machine lamp • Initial fill with Shell Tellus 46 • Faceplate 450 mm • 2 centre points • Frequency inverter • Digital speed display • Slip clutch • Rapid traverse longitudinal and cross • Coolant system • Quick-change toolpost with 4 holders • Change gears • Reducing sleeve • Chip guard • Service tools

Stanje: novo, Bernardo Goliath 500 x 1500 Production Lathe Technical Specifications • Center distance: 1500 mm • Center height: 250 mm • Swing over bed: 500 mm • Swing over gap*: 720 mm • Swing over cross slide: 310 mm • Bed width: 400 mm • Spindle bore: 80 mm • Spindle mount: DIN 55029, D1-8 • Spindle speed range (24): 9 – 1600 rpm • Longitudinal feed range (80): 0.063 – 6.43 mm/rev • Cross feed range (80): 0.027 – 2.73 mm/rev • Metric threads (46): 1 – 224 mm • Imperial threads (44): 1/8 – 28 TPI • Tailstock quill diameter: 75 mm • Tailstock quill travel: 150 mm • Tailstock taper: MK 5 • Motor power: 7.5 kW (10.0 HP) • Machine dimensions (L x W x H): 3020 x 1240 x 1550 mm • Weight approx. 3285 kg * Removable bed length: 200 mm Ndsdpfx Aloxl D Aks Djb Features • Versatile application in general engineering, production, single-part manufacturing, etc. • The one-piece cast machine bed ensures maximum rigidity and low vibration, meeting the essential requirements for precise turning • State-of-the-art main spindle bearing with precision angular contact ball bearings • Central, user-friendly controls for feeds and threads, with leadscrew and feed rod • Standard with longitudinal and cross rapid traverse to reduce non-productive times • Large, hardened, and precision-ground gears • Removable gap bridge allows machining of large-diameter workpieces • Sliding tailstock for taper turning, handwheel with adjustable fine graduation (0.02 mm) • Electromechanical footbrake to reduce non-productive times • Optimum cutting performance, including face turning Scope of Delivery • Slip clutch • Longitudinal and cross rapid traverse • LED machine light • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Faceplate 400 mm • Fixed steady rest – max. workpiece diameter 200 mm • Travelling steady rest – max. workpiece diameter 110 mm • 1 dead center / 1 live center • Motor with magnetic brake, CE-compliant • Foot pedal with braking function, CE-compliant • Initial fill with Shell Tellus 46 • Coolant system • Quick-change toolpost with 4 holders • Safety guard for quick-change toolpost • Reducing sleeve • Chip guard • Service tools

Stanje: skoraj kot novo (rabljeno), Mešalnik Proizvajalec: Eller Prostornina: 1500 litrov Nodpfxex Aygts Al Djdb Popolnoma iz nerjavečega jekla

Leto izdelave: 1993, stanje: zelo dobro (rabljeno), Extraction system for chips from aluminium, steel and PVC Dimensions: 800x1000x2370 Njdpfx Alod Rx H Ej Djdb

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 2700 x 1400 x 1650 mm Weight: 1800 kg Total power requirement: 8 kW Njdpfx Aov A Ht Rjl Dedb CNC Copy Lathe Rotary + Flat CKD-1500 400 ATC - Centre distance: 1500 mm - Centre height: 400 mm - Max. machining diameter: Ø 400 mm - Spindle motor power: 5.5 kW - Stepper motor: 2.2 kW - Engraving spindle: 580 W - Voltage: 400 V / 50 Hz - Spindle speed: 0 – 3500 rpm - Number of controlled axes: 3 - Automatic tool changer, 3-position - Tool change time: at 90° – 2.0 s; at 180° – 2.5 s; at 270° – 3.0 s - Working speed: 3500 mm/min (Example: 5 cm x 90 cm stair baluster, 1.2 minutes per piece) - Linear guides and ball screw drive - Controller: WEIHONG PM 53B5 - Pneumatic workpiece clamping - Milling spindle for flat engraving - Compressed air connection: 6 bar - 12" color LCD display with keyboard - PC included - Including CAD software (NC Studio), CAM software (Cosen) - Heavy-duty bed made from cast steel - Includes 2 V-type steel supports - Includes 10 engraving knives - Includes 1 twisting knife - Includes 1 grooving knife - Includes 4-jaw chuck, 160 mm - Includes 1 internal boring tool - Includes 1 cutting knife - Dimensions: L = 2700 mm, W = 1400 mm, H = 1650 mm - Net weight: 1800 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2019, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 190500021100226, skupna masa: 290 kg, nosilnost: 500 kg, MiR500 EU pallet lift je AMR, ki lahko prevaža do 500 kg. Robot je razstavljen v demo centru. Robot je trenutno brez baterije in polnilne postaje. Nodsz Ehubspfx Al Dodb Strojna oprema vključuje: -Robot MiR500 EU pallet lift Ključni podatki Nosilnost: 500 kg Največja hitrost: 2,0 m/s Dimenzije z MIR500 pallet lift 1350x910x407mm(L x W x H) Poleg robota lahko ponudimo tudi dodatno opremo kot je EU-pallet rack, ... Če imate kakršna koli vprašanja, nas kontaktirajte.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 17.043 h, največja hitrost vretena: 2.500 obr/min, potovalna razdalja osi X: 410 mm, pomik po osi Z: 1.560 mm, moč vretenovega motorja: 42.000 W, skupna višina: 2.850 mm, skupna širina: 2.400 mm, skupna masa: 16.000 kg, Premer palice (maks.): 102 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 840D shopturn, največja dolžina izdelka: 7.200 mm, premer obdelovanca (maks.): 610 mm, število mest v zalogovniku orodij: 12, število osi: 3, Ta 3-osna stružnica EMCO MT 110X 1500 M/S je bila izdelana leta 2007. Ponaša se z impresivnim hodom 410 mm po osi X in 1560 mm po osi Z ter z največjim premerom struženja 610 mm. Stroj je opremljen z zmogljivo 42-kW glavno vreteno in omogoča uporabo pogonskih orodij. Če iščete vrhunske stružne zmogljivosti, priporočamo našo za prodajo razpoložljivo horizontalno stružnico EMCO MT 110X 1500 M/S. Za več informacij nas kontaktirajte. • Ločljivost C-osi: 0,001° • Hitrost hitropomika C-osi: 1000 obr/min • Tip glavnega vretena: A2-11" • Največji premer struženja: 610 mm • Nihaj nad prečnikom: 550 mm • Stružni premer nad ležiščem: 820 mm • Razdalja med konicama: 1500 mm • Hod konjička: 820 mm • Hod lunete: 1020 mm • Skupna priključna moč: 42 kW • Revolverski vpenjalni sistem: VDI 50 mm (DIN 69880) • Največji tlak hladilne tekočine skozi revolver: 25 bar • Število pogonskih orodnih postaj: 12 • Vmesnik za pogonska orodja: DIN 5480 • Območje hitrosti pogonskih orodij: 0–4000 obr/min • Moč pogonskih orodij (25 % ED): 10 kW • Konjiček: Da Ndodpfx Aljzggiis Dsb • C-os: Da • Napajanje: 400 V • Frekvenca: 50 Hz • Faze: 3 • Nazivni tok: 100 A • Priključna moč: 70 kVA • Delovne ure: 17.043 h Dodatna orodja: • Velika izbira visokokakovostnega orodja na voljo (opcijsko) • Transporter ostružkov: opcijsko Tehnične specifikacije Hladilna tekočina skozi vreteno: Da Nasprotno vreteno: Ne Pogonska orodja: Da