Leica Piper 200 nakup rabljenega (16.687)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 330 h, nosilnost: 2.000 kg, dvižna višina: 1.600 mm, prosto dvigovanje: 172 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.335 mm, dolžina vilic: 1.200 mm, lastna masa: 1.350 kg, skupna dolžina: 1.600 mm, vrsta pogona: Elektro, gradbena širina: 790 mm, High-lift pallet truck Load center: 600 mm Mast type: Standard Technical condition: Very good Front tyres type: Polyurethane Front tyres condition: 100% Rear tyres type: Polyurethane Rear tyres condition: 100% Battery voltage: 24V Battery capacity: 300Ah Battery year: 2022 Description: Factory-refurbished used unit from Toyota, including new inspection and acceptance according to FEM (formerly UVV). With power steering. Impulse control, initial lift, CE certificate, Bjdpfxsqynq Ro Agtelg

Stanje: dober (rabljeno), Description: The machine is in good technical condition; testing is possible by prior arrangement. Maximum swing diameter: 660 mm Maximum turned diameter: 660 mm Main spindle: - Speed range: 35–5000 rpm - Main drive power: 22/15 kW - Maximum torque: 349 Nm - Spindle bore: 76 mm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Sub-spindle: - Speed range: 35–5000 rpm - Power (10 min/continuous): 18.5/15 kW - Maximum torque: 326 Nm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Coolant tank capacity: 300 l Machine power requirement: 66 kVA Operating voltage: 400 V / 50 Hz Air pressure: 5 bar, 500 l/min Control system: MAZATROL Fusion 640 MT Coolant rinsing: - Pump capacity: 20 l/min - Pump pressure: 5 bar Accessories: - Technical documentation - Chip conveyor with coolant system - Tool magazine for 20 tools - B axis (positioned at 0.001°), C axis, Y axis - Secondary spindle positioning indexing Bsdpfx Ajy Amqzegtjlg - Synchronization of main and sub-spindle - Tool presetter (Tool Eye) - Front door locking - Tool magazine for 20 tools - Complete cooling system - Interface for IC memory card

Stanje: dober (rabljeno), Leto izdelave: 1998, Emag VSC 200 with workpiece circulation conveyor and chip conveyor. The main spindle bearings were replaced in 2005. Bljdpfxetq Ifno Agtog Control system: Siemens 840D Turning diameter: Ø 260 mm. Turning length: approx. 200 mm. Machine dimensions: Length: 3,200 mm, Width: 1,800 mm, Height: approx. 2,650 mm. Machine weight: approx. 6,500 kg. The machine was only operated in 1-2 shift operation.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 58.001 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.000 kN, premer vijaka: 25 mm, delovna prostornina: 59 cm³, tlak vbrizgavanja: 20 letvica, minimalna višina orodja: 250 mm, izmetalna sila: 25 N, hod izmetalca: 100 mm, skupna masa: 3.900 kg, Oprema: dokumentacija / priročnik, Engel E Max čistilni stroj, letnik 2008, vključno z linearnim robotom GEKU SR 500 ST. Stroj ima skoraj 58.000 ur delovanja v avtomatskem načinu. Stroj prihaja od priznanega proizvajalca iz farmacevtske industrije, zato je bil tako stroj kot rokovanje podvrženo zelo strogemu vzdrževalnemu režimu in sta v odličnem stanju. Blsdpfx Aot A Ufwogtog

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2009, dolžina tovornega prostora: 13.550 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.800 mm, skupna dolžina: 14.100 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, medosna razdalja: 9.450 mm, barva: drugo, Leto izdelave: 2009, Oprema: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Payload: 33,400 kg, Unladen weight: 8,600 kg, Gross weight: 42,000 kg, Chassis type: Incomplete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body year: 2009, Body material: Aluminum, Axle type: BPW = Further Information = General Information Cab: Day cab Registration number: ON-34-DJ Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 11 mm; Tyre tread right: 5 mm Axle 2: Tyre tread left: 8 mm; Tyre tread right: 4 mm Axle 3: Tyre tread left: 2 mm; Tyre tread right: 3 mm Weights Unladen weight: 8,600 kg Payload: 33,400 kg Gross vehicle weight: 42,000 kg Blodpfxoy Irn As Agteg Environment Emission class: Euro 0 Maintenance APK (Periodic Technical Inspection): valid until 12.2026 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Verified quality • Good price • Proper business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of “recognized quality” • And more… Please visit our website for special offers and the complete stock: Leasing via Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an inquiry through our website. Ask directly about our European warranty package.

Stanje: zelo dobro (rabljeno), CTS Type: TSS-70/350-A Water-Cooled Refrigeration Unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is used for conducting thermal shock tests and is typically utilized in industry, research, and quality assurance. Areas of Application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical Data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerants: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg water-cooled Features / Equipment: - CTS control unit with touch display - Microprocessor-controlled regulation and monitoring system - Programmable operation - Digital setpoint and actual value display - 2-zone system (hot and cold chamber) - Automatic transfer basket for shock tests Technical Design: - Hot and cold chambers separated - Transfer basket system for rapid temperature change - Test chamber made of stainless steel - Shelf/grate - Inspection window in the door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: Approx. 950 kg Further Information: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors reserved!) For further questions, we are happy to assist you by phone. Bljdpfx Agey Hkgbeteg

Stanje: zelo dobro (rabljeno), CTS Type: TSS-70/130 Water-cooled Refrigeration Unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The unit is designed for conducting temperature shock tests and is typically used in industry, research, and quality assurance environments. Applications: - Material testing - Aging tests - Electronics and component testing - Temperature shock and thermal cycling tests Technical Specifications: Type: TSS-70/130 Test chamber volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient to +180°C Cooling rate: approx. 4 K/min from ambient to -60°C Temperature deviation: ±1 K (temporal) ±2 K (spatial) Temperature change rate: max. 100 K/min on average for shock testing (without radiant heat) Transfer time between chambers: ≤ 15 min within the range -65°C to +200°C (with 10 kg ICs) Switching time: < 10 seconds Electrical Data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 16.7 kW Rated current: approx. 26.8 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigerant system: Refrigerants: R404A / R23 Water-cooled, low-noise, fully hermetic Features / Equipment: - CTS control unit - Microprocessor-controlled regulation and monitoring system Bodpfx Aoy Hkfdjgtelg - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for user-side test piece control - Fault message on potential-free contact (load up to 30 V DC, 2 A) - EMC tested Technical Design: - Hot and cold chambers - Transport trolley with spindle drive - Test chamber / trolley made of stainless steel, material no. 1.4301 - Stainless steel wire basket - Feedthrough pipe NW 50 with sealing plug - Compressed air connection 1/4" male - Condensate drain non-pressurized R 1/2" female - Safety door lock - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Clearance dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm Width approx. 480 mm Depth approx. 660 mm Window: 300 x 300 mm Other Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: see pictures (Technical data subject to change and errors!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS Model: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for carrying out thermal shock tests and is typically used in industry, research, and quality assurance. Areas of application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and alternating temperature tests Technical specifications: Model: TSS-70/130 Test volume: 130 liters Temperature range: Hot zone: +50°C to +200°C Cold zone: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min average for shock test applications Without radiant heat Transfer time between chambers: ≤ 15 min in the range of -65°C to +200°C (with 10 kg ICs) Changeover time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A Building-side protection: 32 A slow-blow fuse Power plug: Cekon 32 Refrigeration system: Refrigerants: R404A / R23 Water-cooled, low noise, fully hermetic Equipment / features: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for user side test object control - Fault alarm on volt-free contact Load: up to 30 V DC, 2 A - EMC-tested Technical configuration: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber / basket made of stainless steel, material grade 1.4301 - Insert basket made of stainless steel wire - Piping port NW 50 with closure plug - Compressed air connection 1/4" male thread - Non-pressurised condensate drain R 1/2" female thread - Safety door lock - Lockable door with window Dimensions according to installation plan: External dimensions approx.: 2335 x 940 x 1820 mm Insertion dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm Width approx. 480 mm Depth approx. 660 mm Window: 300 x 300 mm Bedpfey Hkd Hsx Agtelg Additional data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average test cycle consumption: approx. 8 kWh Important buyer safety information! The following procedures are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant where required 3. Leak tightness test with certificate 4. After a successful check, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see images (Specifications subject to change and error!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Odsesovalna naprava Felder RL 200 maksimalna zmogljivost 4000 m³/h Bledpfjy Ia Ausx Agtog priključek za odsesovanje 200 mm samodejno čiščenje motor 4 kW zelo dobro stanje

Stanje: rabljeno, Leto izdelave: 1991, Tehnične podrobnosti: Tlak: 2000 t Dolžina upogiba: 4100 mm Blodpey Alw Hofx Agtjg Krmiljenje: - Razdalja med stojali: 3200 mm Maks. hod: 250 mm Skupna potrebna moč: 22 kW Obratovalni tlak: maks. 280 bar Širina mize: 200 mm Hitrost hoda - navzgor prazno: 100 mm/s Hitrost hoda - navzdol prazno: 100 mm/s Približna teža stroja: 18.000 t Dimenzije stroja: 5,0 x 2,7 x 3,0 m

Stanje: rabljeno, Leto izdelave: 1992, Overview These four isobaric pressure tanks (each with a capacity of 20,000 liters) were manufactured in 1992 by TMCI Padovan, originate from the wine industry, and were previously used for sparkling wine production. Featuring full-surface cooling jackets and a nominal pressure rating of up to 6 bar, the tanks are suitable for the fermentation, maturation, and storage of carbonated beverages including beer, sparkling wine, and related products. The tanks are constructed from carbon steel and feature an internal food-grade epoxy coating—a technology widely used prior to stainless steel becoming the industry standard. They represent a cost-effective alternative to stainless steel tanks, particularly for producers seeking lower investment costs. Each tank is fully insulated and equipped with a complete cooling jacket, enabling temperature-controlled processes. Due to the coating system, regular inspections and renewal of the epoxy lining are required depending on utilization and product type. Technical data: Manufacturer: TMCI Padovan Year of manufacture: 1992 Quantity: 4 units Type: Isobaric pressure tank with full cooling jacket Application: Fermentation, maturation, and storage of carbonated beverages Capacity: 20,000 liters (200 hl) per tank Material: - Shell: Carbon steel - Internal lining: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Bljdey Hkl Dspfx Agteg Pressure rating: 6 bar Dimensions (per tank): - External diameter: approx. 2,200 mm - Cylindrical height: approx. 7,000 mm - Total height: approx. 9,000 mm

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Industrial printer for versatile applications. Printhead: Piezo printhead (2 staggered printheads). Print resolution: 300, 450, 600, 900, 1200 dpi. Ink type: CMYK ink + white + varnish. 8 x 1-litre ink cartridges (CMYK + 2 x varnish + 2 x white). UV-curable ink: LUS-120 (C, M, Y, K, W, Cl). UV-curable ink: LUS-150 (C, M, Y, K, Lc, Lm, W). UV-curable ink: LUS-200 (C, M, Y, K, W). UV-curable ink: LUS-350 (C, M, Y, K, W, Cl). UV-curable ink: LH-100 (C, M, Y, K, W, Cl). Ink supply: 1-litre bottles per cartridge. Colour Maximum print area dimensions: 2500 × 1300 mm Media dimensions: 2500 × 1300 mm Maximum height: 50 mm (printing on rigid surfaces/materials up to 50 mm thickness) 2 printheads Weight: Under 50 kg/m² (non-concentrated load) Media hold-down: Fixation by vacuum Number of vacuum zone segments: 2 segments (X-axis) Bodpfjy Ip Utsx Agtelg Absolute accuracy: ± 0.3 mm or ± 0.3% of the specified range Reproducibility: ± 0.2 mm or ± 0.1% of the specified range UV unit: LED UV system Standard life: Over 5,000 hours Interface: USB 2.0 Power supply: Single-phase, 200–240 V AC, 50/60 Hz Power consumption: Under 2.88 kVA

Stanje: novo, Širina pločevine 3100 mm Debelina pločevine 6 mm Upogibna moč 5 mm Premer zgornjega valja 200 mm Minimalni upogibni premer Ø 300 mm Hitrost upogibanja 5 m/min Skupna poraba energije 5,5 kW Blsdpfoyv Nf Isx Agtog Teža stroja cca 4.000 kg Prostorske zahteve cca 4800x1300x1270 mm Oprema: - Naprava za konično upogibanje - Indukcijsko kaljeni valji - Motorizirana nastavitev zadnjega valja - Okvir stroja iz jeklene varjene konstrukcije (ST-52) - Valji iz posebnega jekla - Asimetričen način dela - Stransko izklopni zgornji valj - Osrednji valji so gnani z elektromotorjem, zavorno napravo, reduktorjem in zobniškim pogonom - Mobilna nadzorna plošča Posebna oprema: - Digitalni prikaz za zadnji valj - Motorizirani pogon spodnjega valja

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm long Manual rope forming attached to the frame for pallet reinforcement Blsdsykucmepfx Agtsg TECHNICAL DETAILS: Low-profile turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, up and down Audible signal at cycle start and stop Emergency stop button in accordance with CE regulations Turntable always stops at same home position Carriage anti-fall safety device Push buttons for machine on/off, start/stop & reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F00 - Display/program change lock F02 - Infinitely adjustable turntable speed, 5–12 rpm Carriage speed up and down adjustable independently F03 - Carriage speed upwards: 1.3 to 5.4 m/min F04 - Carriage speed downwards: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10) F06 - Number of wraps at pallet top (1–10) F09 - Delay on photocell for wrapping height F13–F16 - Film tension (base/top wraps and up/downwards) independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS 6 storable wrapping programs F01-1 - Cross wrapping (up/down) F01-2 - Simple wrap (up only or down only) F01-3 - Push button for manual functions F10/F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to preset height (with photocell deactivated) F22/F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for edge protection application F30/F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set at 200% Film tension electronically controlled through control unit Film specification: max. outer diameter Ø250 mm, height = 500 mm, core Ø76 mm Standard connection: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratios of 150% / 250% / 300% available Further units available from stock in Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MythoSarya05, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Blodjykuh Nopfx Agtsg Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm Bledpfx Agoykud Rsteg 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Bledpfx Ageyktrtstsg Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm in length TECHNICAL DETAILS: Turntable, LOW PROFILE · Height: 25 mm · Maximum pallet dimensions: 1000 x 1200 mm · Maximum load capacity: 1200 kg · One ramp included Bodpoykuiasfx Agtolg Wrapping height (including pallet): 2,200 mm Height detection by light sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable for upward/downward movement Signal tone at wrap start and end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power on, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Infinitely variable turntable speed: 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward: 1.3 to 5.4 m/min F04 – Carriage speed downward: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photo sensor delay for wrapping height F13–F16 – Film tension for foot & head wrapping / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (upward/downward) F01-2 – Simple wrapping (up only or down only) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop height F12 – Wrapping to a preset height (deactivates light sensor height detection) F22/F23 – Wrapping cycle for top sheet film F29 – Soft-start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle by push button FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specification: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratio of 150% / 250% / 300% available Additional units available from stock in Ludwigsburg.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Bedpfx Agjykub Aotslg Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for dark products Film cutting device etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.

Leto izdelave: 2017, obratovalne ure: 1.052 h, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN. S10008727, The dynamic temperature control system "vario" is designed for cyclical mold temperature regulation. It is equipped with a tool-close valve switching unit (piston accumulator) to supply the piston inserts with water up to 200°C. PURCHASE PRICE of the system: €67,000 + water hoses. Blodpfx Agoyxgnfstsg The system will be inspected at Technotrans (GWK) before sale. More technical details about the "vario" temperature control unit available upon request. The complete system consists of: - Medium: water up to max. 200°C - Heating capacity (heating circuit): 90 kW - Heating capacity (cooling circuit): 9 kW - Cooling: indirect - Cooling capacity: 280 kW - 1x 2-circuit vario system wh200 (cyclical temperature control of mold inserts) - 1 tool-close valve switching unit - 1 piston accumulator - 1 electronic control unit ESR (energy storage) - 1 water treatment unit - 1 hose and connection package (optional, surcharge applies) - and much more...see photos

Stanje: rabljeno, prevoženi kilometri: 194.229 km, moč: 105 kW (142,76 KM), prva registracija: 12/2020, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 2, prostornina tovornega prostora: 10 m³, dolžina tovornega prostora: 2.800 mm, širina tovornega prostora: 1.860 mm, višina nakladalnega prostora: 1.980 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Vehicle ID for customer inquiries: 140 ----Refrigeration Unit: * Carrier Xarion200 * Standby and in-transit cooling * Power connection * Fresh service 0°C * Refrigerant: R452A * 3x side doors * Kießling body construction * Load compartment dimensions: L: 2,800 mm W: 1,860 mm H: 1,980 mm * Payload: 825 kg ----Special Equipment: * Automatic climate control (Tempmatik) * 1 DIN slot front, below dashboard, passenger side * MB audio system radio with USB and Bluetooth hands-free function * Single-pole battery disconnect switch * DAB tuner (digital radio reception) * Suspension: Stabilization Level I * Rear door (opening angle 270 degrees) * All-weather floor mats * Vehicle without start/stop system * Alternator 250 A * Additional main key * Terminal strip for electrical connections (under driver's seat) * Fuel filter with water separator * Front engine PTO with bracket for additional coolant compressor * Front mud flaps * Cab seats: Comfort driver’s seat ----Standard Equipment: * Storage compartment above windscreen * Rear tow hook * Adaptive brake light * Driver’s airbag * Hill start assist * Anti-lock braking system (ABS) * Traction control system (ASR) * Drive type: rear-wheel drive * Washer fluid level indicator * Electrically adjustable and heated exterior mirrors, both sides * Outside temperature display * Brake assist * Roof lining in cab * Automatic headlights * Electronic brake-force distribution (EBV) * Electronic stability program (ESP) * Driver assistance system: crosswind assist * Electric windows (2x) * G-Tronic automatic transmission (7-speed) * Body: standard platform body * Keyless start * Communication module (LTE) for digital services * Fuel tank: main tank 71 l * Steering wheel (mechanically adjustable column) Bledpfxex Uu Tho Agteg * Headlight range adjustment * Truck registration * Mercedes-Benz emergency call system * Engine 2.1 l – 105 kW CDI CAT * Particulate filter * Wheelbase 3,250 mm * Low emissions according to Euro 6 standard * Driver’s seatbelt warning system * Seat cover/upholstery: fabric * Cab seats: passenger seat with armrest * Cab seats: adjustable passenger seat * Cab seats: driver’s seat with armrest * Steel wheels 6.5x16 * Daytime running lights * AGM battery 92 Ah * Maintenance interval indicator Assyst * Immobilizer * Heat insulating glass * Central locking with remote control * Permissible total weight: 3.50 t ----Technical Data: * Wheelbase: 3,325 mm * Load compartment dimensions: L: 2,800 mm W: 1,860 mm H: 1,980 mm * Payload: 825 kg * Tire size: 235/65 R16C ----18,850.- Euro net plus VAT * For export to non-EU countries or other EU states, a deposit will be withheld. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery available – please ask us for your individual offer! * We are happy to consider your used vehicle as trade-in!! * This description is for general identification of the vehicle and does not constitute a guarantee in the context of sale of goods law. * The information provided does not claim to be complete. All details/descriptions/images are subject to change and do not represent guaranteed characteristics. * We accept no liability for errors or obvious mistakes. * The buyer is obliged to independently verify the condition and specifications of the vehicles prior to purchase.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 6 meseci, leto zadnje generalne obnove: 2026, vhodna napetost: 400 V, Certificirano po DGUV do: 05/2027, skupna masa: 940 kg, skupna širina: 1.200 mm, skupna dolžina: 1.175 mm, vhodna frekvenca: 50 Hz, vhodni tok: 10 A, električna varovalka: 16 A, Dvigalni gnetilnik ++++ TOP model Diosna, premični gnetilnik ++++ Stroj za testo s preprosto in robustno tehniko za maks. 200 kg testa Nerjavni kotel in gnetilna roka 2 vozička za kotel, 2 prestavi Priključek 400V, vtič 32A-CEE Rabljena stroj, obnovljen z garancijo in servisom Možnosti: Bjdju A Hhrjpfx Agtelg Dostavna storitev Leasing & najem Vzdrževalna pogodba Servisni paket Dostava s pritrditvijo na tla Uvajanje in zagon Na zalogi imamo veliko izbiro dvigalnih gnetilnikov!

Stanje: rabljeno, Leto izdelave: 2013, Suitable for automatic, double-sided grinding of tooth flanks on carbide-tipped circular saw blades. Accessories: Bsdpfev Sbmqox Agtslg - Full enclosure - Coolant system - Automatic central lubrication - Measuring system for saw blade measurement - Control panel with LCD color display - DNC service - Alphanumeric keyboard - Grinding speed and grinding path adjustable depending on tooth surface - 2 grinding wheel mounts - Coolant fill level monitoring - Automatic grinding wheel compensation - Prepared for robotic operation with automatic loading door - Oil drip tray - 2 x saw blade magnetic holders: >Ø 320mm, >Ø 180mm - 1 centering ring Technical Data: - Circular saw blade diameter: 200 - 840 mm - Circular saw bore diameter: from 16 mm - Tooth pitch: 6 - 180 mm - Grinding path: up to 25 mm - Tangential clearance angle: 0 to 10° - Max. grinding wheel diameter: 125 mm - Grinding wheel bore diameter: 32 mm - Grinding spindle variable: 1600 - 5500 rpm - Connected load approx.: 8 kVA (400 V / 50 Hz) - Dimensions (W x D x H): 2770 x 1900 x 2045 mm - Weight: approx. 4700 kg - Color: grey

Stanje: rabljeno, Leto izdelave: 2010, Suitable for the automatic grinding of tooth face, tooth back, and blade body on carbide-tipped circular saw blades in a single clamping operation. All common tooth geometries (flat, alternate, trapezoidal tooth, etc.) can be ground automatically and in a single pass. Accessories: - Full enclosure - Measuring probe - Device for grinding with oil cooling - Automatic fire extinguishing system - Grinding mist extraction N 183 - Alphanumeric keypad - Oil catch tray - Machine lamp Saw diameter: 80–840 mm Bore diameter: from 10 mm Blade thickness: < 8 mm Tooth pitch: 6–120 mm Cutting length: Bedpfx Aswp Eblegtolg

Stanje: rabljeno, Leto izdelave: 2019, Suitable for the automatic grinding of carbide-tipped circular saw blades on both the face and back in a single clamping operation. All common tooth profiles (flat, alternate, trapezoidal tooth, etc.) can be ground automatically and in a single pass. Accessories: - Full enclosure - Wet grinding equipment - Robot operation interface with automatic loading door - Loader ND 230 - Measuring device for saw blade inspection - Chip-divider grinding fixture - Infinitely variable grinding speed of both grinding spindles from 1600 – 5500 rpm - Grinding speed and grinding path per machining surface on the tooth are infinitely adjustable - Automatic central lubrication - Software package for oscillating grinding of rake and clearance angles - Automatic closure flap - Automatic fire extinguishing system - Electrostatic oil mist separator N281 - Calibration tool - Saw blade mounting with guide bushing Ø 16 mm for saw blade mounting >Ø 180 - Saw blade mounting with guide bushing Ø 16 mm for saw blade mounting >Ø 320 - Grinding wheel mounting flange for chip divider - Centering ring for mounting pin Ø 16 mm for saw blade bore Ø 32 mm - Centering ring for mounting pin Ø 16 mm for saw blade bore Ø 40 mm - Centering pin Ø 10 mm - Machine lamp - Saw blade blow-off device - Data entry station DES 400 - 3 loading carts with 30 mm mandrels - Oil drip tray - Automatic central lubrication Technical data: - Saw blade diameter: 200 – 840 mm - Bore diameter: from 16 mm - Blade thickness: up to 15 mm - Tooth pitch: from 6 to 180 mm - Cutting edge length: up to 25 mm Blodpfxsyvgf Ds Agteg - Rake angle: from -35° to +20° - Clearance angle: 0° - 25° - Bevel grinding on tooth back: up to 45° - Bevel grinding on tooth face: up to 30° - Bevel grinding on negative tooth face: up to 30° - Tooth height difference: variable - Grinding wheel diameter: max. 200 x 32 mm - Dimensions (W x D x H): 2770 x 1900 x 2058 mm - Weight: 4700 kg - Connected load: 8.7 kVA (400 V / 50 Hz) - Colour: grey RAL 7045 / grey RAL 7047